Any way to retain exif on files posted to Creative Cloud albums?

Hi, is there any way to retain the exif on files I have uploaded to my Creative Cloud photo albums? Thanks, any comments would be greatly appreciated.

Have you tired to "screenrecord" with some software (depending on your OS) just what is shown on your screen while playing the swf?

Similar Messages

Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus

Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus.

In short, no. There is no fix yet. They only barely acknowledge there is a problem. The "fix" is to enable 200% UI scaling which makes everything comically huge and unusable. This is pretty much of a joke. A really, really EXPENSIVE joke.

Does anyone know if there's any way to find out what files in my Library

Does anyone know if there's any way to find out what files in my Library I can delete? I just cleaned off my HD onto a media drive as a back up so all my movies documents and photos are gone but my Library seems to be a huge space hog eating sixty gigs of space and I do have alot of apps but they don't take up a third of that space... Any ideas how I can figure out what is wasting all this space? I had Spring Cleaning once but found it to be rather confusing as to what was essential to the OS and what not...
Thanks,
Matt

Get free OmniDisk Sweeper. I can't imagine how you could have sixty GB in that folder. My entire ~Library isn't even 1GB. Are you sure you're not talking about your entire Home folder?
Can you post a screenshot of the contents of that folder.
Check again. Are you sure you moved all the Movies etc. out? Could have left duplicates of everything behind when you did this.
Message was edited by: WZZZ

Is there any way to create 3D PDF file without having the model tree ?

Is there any way to create 3D PDF file without having the model tree ?
3D communication is good but sometime we don't want the receiver to be able to study every components in model.
or any way to make the receiver cannot use model tree and measurement tool ????
Thank you very much

You can remove the assembly tree by doing a roundtrip in 3D Toolkit, here's how:
- start Acrobat 3D
- drag & drop a CAD file
- click on 3D Annot to activate
- right-click on 3D
- select 'Edit in 3D Toolkit'
- 3D Toolkit launches
- click in 'Scene Tree' panel
- right-click on top assembly name
- select 'Tools->Collapse Hierarchy'
- select 'File->Save'
- select 'File->Exit'

Is there any way to create a setup file Like Visual Basic

Hi,
I want to create a setup file of all developed foms and reports to install them to desireable location, is there any way to create a setup file in oracle, Like Vb.
Raza

I believe there is something from Oracle but it was frustratingly buggy when I used it a few years back and only worked via the Oracle installer.
Personally, I'd recommend something like Innosetup, which is freeware and a Windows-style installer much like InstallShield etc. so it'll create an executable setup file probably OK if they've already got the Oracle Runtime components installed.

Is there any way to embed the pdf file in the book created in iBooks Author to make it available to be downloaded or sent to email? So that the user can print it out.

Is there any way to embed the pdf file in the book created in iBooks Author to make it available to be downloaded or sent to email?
I'm making the book for children and there is one chapter providing coloring pages. So I wish to attach pdf files that allow users to download it at the end of chapter so that they can print it out. Been searching through discussion, I've found some advice about taking screen snapshot page-by-page > then send the pics from photo album to email. However, I'm wondering if there's a way that make the process easier.

Warehouse that PDF on your own server, then link to it from your book.
Ken

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

Any way of getting Real Media files to play in Front Row?

I was just wondering if there is any way to get Real Media files to play in Front Row? I realise this is probably not possible, but I thought I'd ask people who know more about this than me!!
I do have Real Player installed if that helps......

Probably not right now. Since Front Row uses iPhoto to play slideshows, the DVD Player to play DVDs, iTunes to play MP3s and the QuickTime Player to play videos, there's no way now to change the default video player application. All of those connections are hard-wired into the software. Apple has not released any kind of SDK (software development kit) for third parties to add on to Front Row, so it would have to be an unauthorized hack to get another video player to run. I might suggest you send Apple some Mac OS X feedback and let them know you'd like to see third party add-ons to Front Row.
-Doug

Is there any way we can save PDF files of 1.8v & 1.9v to 1.4v using plug-in?

is there any way we can save PDF files of 1.8v & 1.9v to 1.4v using plug-in? (using PDDocSavePara )

Something like this.
Change VER variable to version number as you need. ex. VER = 7 -> PDF 1.7
pdoc = AVDocGetPDDoc(avDoc);
PDDocSaveParams saveParams;
unsigned char buffer[sizeof(_t_PDDocSaveParams)];
saveParams = (PDDocSaveParams)buffer;
memset(saveParams, 0, sizeof(_t_PDDocSaveParams));
saveParams->fileSys = ASGetDefaultFileSys();
saveParams->major = 1;
saveParams->minor = VER; //change version here
saveParams->saveFlags = PDSaveFull | PDSaveCollectGarbage | PDSaveForceIncremental | PDSaveKeepModDate;
saveParams->size = sizeof (_t_PDDocSaveParams);
saveParams->saveFlags2 = PDSaveUncompressed;
PDDocSaveWithParams (pdoc, saveParams);

Is there any way to import the PST file to Thunderbird

My boss used Outlook 2010 to store all his emails. Is there any way to import the PST file to Thunderbird so he can access them from a new computer?
Thunderbird cannot be installed on the old computer and Outlook is not on the new computer. All information is saved in a PST file on our local backup.
Alternatively, is there a way to convert to a file type that CAN be imported? This is a 5GB file. (I know, I KNOW, but I cannot convince him he doesn't need all of these emails.)

Does he use an e-mail provider with sufficient mailbox space? In that case, you can move the e-mail back to the server and download it using Thunderbird.
This only works when you configure the e-mail account with IMAP (not POP3).
Hope this helps.

Is there any way to keep all firefox files and settings in a specified place?

I recently put a version of firefox on a flash drive for when using public computers so I can always have the custom settings and addons available. But the inherent problem is that firefox puts files in the documents and settings folder on the computer, and sometimes the computer will not allow any files to be put in the directory and firefox will not run there. Is there any way to confine all the files in the same place short of putting the whole operating system on there?

You can use the portable Firefox version that comes with its own profile on the flash drive.
*http://portableapps.com/apps/internet/browsers/portable_firefox

Is there any way to eliminate the locked file function in iWork apps?

Hi, I recently added Lion to my Mac. Is there any way to eliminate the "locked file" function. I do not use iCloud or Time Machine on my Mac. Thanks. Bob

I don't use Time Machine either but the option for this function is in the Time Machine options.
Open System Preferences > Time Machine
Click 'Options'
The bottom option should be about auto-saving. To stop applications from locking documents, uncheck the box. To extend the peiod before the document is locked, select the appropriate time from the drop-down menu.
Hope that;s what you wanted!

IMovie '08 freezes up...any way to save backup working files?

I'm really frustrated at losing projects and having to spend countless hours rebuilding them. On two separate occasions, iMovie has gotten "stuck" on launch and only shows partial screens and is inoperable. I found a thread where several other people were having this problem also. The remedy for me was removing my projects from the projects folder and then it will launch and operate fine, make new projects and functions normally. However, the original project somehow got corrupted, and when moved back into the projects folder, it freezes up iMovie. All previously uploaded/imported raw events are still available and fine, once I remove the culprit projects.
I have installed all updates for iMovie, iLife '08, and iSupport. I also have removed several strategic preferences and cache files from the library, to no avail. One user reported success at making a new user account, logging in to that account, and copying the iMovie application to the shared folder, then logging back into the primary account and replacing the application. Didn't work for me.
I am wondering if there is any way to save the project files like the older version iMovie HD? That way, I could save a back up copy of the working file somewhere and hopefully be able to use it, in the event that my project becomes corrupt. The project files don't have any extension. In iDVD, you are able to save a project in progress (to any location) and reopen it any time to make edits. In iMovie '08 there is no option to "open" an existing project, only start a new one. This seems very strange to me.
I'm about to give up on iMovie '08, I see that many people are experiencing bugs and I'm tired of having to spend countless hours redoing work.
Any thoughts or suggestions?

Thanks for the suggestions. I tried them unsuccessfully. No worries, I've resigned to the fact that iMovie '08 is a POS, learned from doing some research, talking with tech support, and reading many other discussions. Why else would they offer a special iMovie 06 HD version for Leopard. Besides, much of the past functionality is now gone.
I've downloaded and will use the HD version until I purchase Final Cut. Users beware, iMovie 08 is sketchy.

I am working on a PC. My InDesign CS6 was working but is now missing its amtlib.dll file. To fix it it says to reinstall program but I was am idiot and didn't make a copy. Is there any way to reinstall this missing file?

I am working on a PC. My InDesign CS6 was working but is now missing its amtlib.dll file. To fix it it says to reinstall program but I was am idiot and didn't make a copy. Is there any way to reinstall this missing file?

It was bought for my son and he never registered it.
I still don't understand why Neema was trying to reinstall it when she didn't have the serial number but after she uninstalled it, said she couldn't reinstall it because I didn't have the serial number. I never had it yet she didn't have a problem with trying to install it originally.
Still won't buy another Adobe product again. I've talked to a lot of people who can't stand Adobe and I now know why. I can't even update Flash without my whole system crashing or getting a virus.
I won't re-purchase InDesign either. I realize it should have been registered and I explained that my email had been hacked and my proof of purchase was deleted with ALL of my emails and I also had a major virus after updating Flash.
I can't afford to buy the same product twice.
I will find out what other formats my book distributor (Ingram Books) accepts and purchase that program.
Not impressed with Adobe and will share my experience with others so they can be sure to register their product and make a copy of the program BEFORE allowing an Adobe employee to take control of their computers.
If you knew the answer to my question, customer support should have too.
Thanks for your help.
Denise

Is there any way to get back a deleted Note through the Cloud?

Is there any way to get back a deleted Note through the Cloud? had important info saved as a Note and deleted it by accident. Please help.

No, you have to have turned it on. For example, in itunes, the first tab for your device, you can specifiy to back up to icloud instead of itunes.

Any way to retain exif on files posted to Creative Cloud albums?

Similar Messages

Maybe you are looking for