Any way to root a K1 without wiping the tab clean?

The instructions found on xda-develop and rootzwiki seem to indicate that the tablet will be wiped clean of apps and data. Is there any way to root the K1 without wiping everything clean? I'd like to backup some apps and data in preparation for flashing ICS which Mark says will also wipe the tablet clean.
Thanks!

You might be able to backup the apps with ES File explorer, but you won't be able to backup their data - the android security model sandboxes apps so that they can't access each others' data - this is why root is required for a proper backup. 

Similar Messages

  • With just ONE inatentive sweep of my finger one page of my note was disappeared! Is there any way it can be recovered without using the help of iCloud backup?

    1. With just ONE inattentive sweep of my finger one page of my note disappered. Further more, the same page in my iPad was deleted automatically too! How could this happen? Is there any way it can be recovered without using the backup feature from iCloud? The data is vey important to me?
    2. I havn't connect the power code to my iPad yet, the backup copy in the iClout was before the accident as I checked in iPad. Is there any way that I could open my notes in iCloud backup so that I can copy the missing page and move back to my iPad and iPhone?
    Thanks a lot for any help!
    Xueyu

    Sorry, no. The only way to restore this note is to restore from a backup that contains it.

  • Hey guys I got a used iBook from a family friend who had it password protected and he doesn't remember the password.Is there a way to get around this without wiping the computer?I don't have any of software discs and can't update or delete anything.Thanx

    Hey guys I got a used iBook from a family friend that has it password protected.I can't update or delete programs or download anything without the passwords and he doesn't remember them.Is there any way for me to get around these without wiping the computer and starting from scratch?

    Hello,
    Sadly without the system disk you can't do a lot. I would suggest you enable root user, log in as root and reset your administrators password, however you can't without knowing the administrator password first.
    The only solution would be is to obtain the correct system disk or buy a retail copy of Mac OS X. But note, it depends on what version of the iBook you own depends, on what version of Mac OS X you will require.
    You can still obtain the system disk or retail disks from online vendors, but they come at a cost.
    System disk are grey in color, while retail disk have a big 'X' on it.
    Best of luck

  • Is there any way to check rc.conf without restarting the machine?

    Hi everybody,
    I've VPS running with Arch. It was preinstalled with very, very old versiol so I've upgraded everything, updated rc.conf by hand but still never restarted completely. So my question is - is there any way to check that the server will boot up without issues? Is there any way to check that rc.conf is completely valid?

    peets, thanks! It seems to be ok at this point.
    tomk, understood... Well, I'll paste it here maybe somebody could look throught for some possible incompability problems from old version:
    LOCALE="en_US.utf8"
    HARDWARECLOCK="localtime"
    TIMEZONE="Europe/Vilnius"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    MOD_AUTOLOAD="yes"
    MOD_BLACKLIST=()
    MODULES=()
    USELVM="no"
    HOSTNAME="server"
    DAEMONS=(syslog-ng network netfs crond sshd nginx mysqld @postfix php-fpm @svnse
    rve @pure-ftpd)
    lo="lo 127.0.0.1"
    INTERFACES=( "lo" "venet0" "venet0_0" )
    venet0="venet0 127.0.0.1 netmask 255.255.255.255 broadcast 0.0.0.0"
    rt_venet0="-net 191.255.255.1 netmask 255.255.255.255 dev venet0"
    rt_default="default gw 191.255.255.1"
    ROUTES=( "rt_venet0" "rt_default" )
    venet0_0="venet0:0 79.98.27.163 netmask 255.255.255.255 broadcast 0.0.0.0"
    The most important is to bring networking up after restart :-) last lines from "lo=..." is from old rc.conf so I'm not sure if this is compatible with newest Arch.
    Thank you for help, guys!
    Last edited by InfernalH (2009-06-13 15:24:37)

  • Is there any way to send an album without all the photos attaching and the file being huge? and the file being huge?

    Is there any way to send just a link to an album? (vs attaching everything and having a huge file?) Thanks!

    No.
    File -> Export and send them to a Folder on the desktop. Then do what you will with them from there.
    There is nothing to be gained by installing Picasa if you're using iPhoto.
    Regards
    TD

  • Is there any way to listen to music WITHOUT using the speakerphone or headphones?

    I listen to streaming talk radio in my car, I usually have drive to and walk in and out of several office buildings throughout my day. I would like to be able to just put my BB up to my ear and pretend like I am listening to someone talk on the phone, when I'm really listening to the radio. Is there any way to do this? I hate having to fumble around with headsets every time I stop, and obviously I cant walk through a office building with the loud speakerphone/built in speaker blasting.

    Sure there is.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Is there any way to restart an iPod without hitting the buttons?

    Yeah...since my iPod is stuck on permanent lock, and I've tried everything the site gives me, I never came across a way to restart the iPod without having to hit the Select and Menu buttons. Is there?

    It does show up in iTunes and I have restored it...both have proven unsuccessful. I've tried toggling the Hold button, and it's not on Screen Lock, just on Hold Lock.

  • Is there any way to turn off airport without removing the electrical plug and should I unplug it when not using it??

    I just got the 5G Airport Extreme base station. Set-up was a snap! Maybe 10-15 minutes compared to a friend who got another name brand for his pc and took a couple hours, even having to call customer support! Been working great so far, but am concerned about never turning it off, not only about the possibe harm that could be done to the unit, but also about having an active, open Internet connection 24/7. Before I got my Airport Extreme I was using Ethernet cable with a cable modem that could be placed on "standby" whenever I was not using my Mac for Internet, but since AE5G doesn't have a power switch on the unit, have left it turned on rather than unplugging it by the electrical cord. I did turn AirPort "off" in the menu bar when not using it wth my Mac, but AE is still apparently constantly active, showing a steady green light. Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
    Thanks for the help!

    Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
    That is a matter of debate, since there are two schools of thought regarding power status on a router.
    One school maintains that you can turn the device on and off as needed. Makes sense for some folks. The advantage of this is that it might save a bit of electricity, although the Extreme draws very little power most of the time.
    Another school believes that there is a reason why Apple did not even place an "Off" switch on the device. It's designed to run 24/7.
    Leaving the Extreme on will place far less stress on the electrical components in the device since they stay in an "idle" state most of the time, drawing very little current. Powering any electrical device up sends a sudden rush of current through the device, which places far more stress on a device than if it is simply left on.
    It depends on your priorities. If you want to save electricity, your decision is already made. If you intend to prolong the life of the router, then consider leaving it on, as Apple intended.
    A compromise position might be to leave the Extreme on most of the time and power if off for long weekends or vacation periods when you will be away. Remember that the Extreme must establish all new network connections every time that it powers back up....perhaps another reason to simply leave it on.

  • HT204266 I erase all application of my iphone 4 with erase restore and now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file i just want my i phone ok and work smoothly as new p

    Hi,
    I erase all application of my iphone 4 with erase restore without any backup & i also lose the product serial number. Now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file I just want my iphone4 ok and work smoothly as like new ipone justlike i bought it at first time. I can't restore it. So Please help me to solv this proble.

    See Here  > without the Backup  >  http://support.apple.com/kb/HT4137

  • My iphone's memory is near capacity from photo albums sync'ed with my mac and I haven't found out how to delete select albums without wiping the iphone.  Any suggestions??

    my iphone's memory is near capacity from photo albums sync'ed with my mac and I haven't found out how to delete select albums to free up memory without wiping the iphone.  Any suggestions??

    You do the opposite of how you got them on your phone, you unsync the pics using iTunes.

  • Is there any way to reset security questions without a vocal contact with Apple?

    Yesterday I've tried to buy a song from iTunes, and it's surprised me that I've been ask to answer some security questions I have made long time ago and unfortunately I can't recall the answers of these security questions, I've tried to reset the security question by this site applied.apple.com and the reset link is not appearing under the answer box!!
    Is there any way to reset security questions without making a vocal contact with Apple ?
    Best Regards,

    Click here and ask. If they say that there isn’t, and they probably will, accept that.
    (122113)

  • I have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)

    i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)   I NEED HELP BADLY PLEASE....

    What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.

  • I bought a MacBook Pro off of someone and the home folder is still in their name...is there any way I can change it without losing all of my stuff?

    So I recently bought a MacBook Pro off of someone so I can use it for school. The home folder is still in the previous owners name and I was wondering if there is any way I could change it without losing all of my stuff that is on the MacBook Pro??  Thanks for your help!

    See Changing user account short name

  • Recorded a video in portrait mode and want to switch it to landscape mode is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone

    is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • HT1688 I took my SIM card out of my iPhone so I could try a different phone and somehow some one stole my iPhone,,, was wondering there is ANY way i can locate it without my SIM card in it?

    I took my SIM card out of my iPhone so I could try a different phone and somehow some one stole my iPhone,,, was wondering there is ANY way i can locate it without my SIM card in it?

    Nope, you are out of luck.

Maybe you are looking for

  • Event handler

    Hi...    I would like to know about event handler txn code: "crmv_event"   Can any one educate me about this ? How is this functionality used.? Any example ? Regards, sanjana

  • Can user update the 6i canned Reports output in any format?

    Hi, We are converting the existing 2.5 reports to 6i reports and our users requested a functionality to update the output of the canned reports. I can generate the output in PDF, RTF, HTML, XML from the developer and view it but cannot update the inf

  • WDContextMenuHandler.dll crashes Explorer.exe

    After updating to the latest WDSmartware on my laptop running Windows 7 x64  the Explorer.exe process crashes once in a while with the following error in the event log. Any suggestions as how I can fix this? Error: (03/30/2015 08:51:38 AM) (Source: A

  • HT1926 Error msg APS Daemon.exe MSVCR80.dll is missing

    Earlier today I tried to install the newest version of iTunes and was unable to complete the installation process.  Received the error message APS Daemon.exe that MSVCR80.dll is missing plus Error 7 Windows error 126 that iTunes not correctly install

  • GPIB Controller "sre 0"

    I have a LabVIEW 7.1 application that interfaces via GPIB (488-2) with a Ruska 6005 Interface Panel.  For the most part, there are no problems. However the author has used "sre 0" at the end of the program to unassert REN and return the interface to