Any way to see when an iphone 5s has been updated by date and time?

anyway to see when an iphone 5s was updated by date and time? that info is very important

Warren,
The message doesn't show if you use a local (it does when you use a property
node!). The boolean does blink!
Try the attached VI.
Regards,
Wiebe.
"Warren Massey" wrote in message
news:5065000000050000007C570100-1075935269000@exchange.ni.com...
> I've already tried something like this and it just does not work like
> I want it to.
>
> Enforced with a sequence structure I do this:
> 1) put up a message saying "Updating"
> 2) dump the updated data to the display
> 3) clear the message
>
> What I see on the CRT is this:
> 1) a message saying "Updating"
> 2) the message quickly goes away
> 3) several seconds later the image changes.
>
> My kludge/workaround is to add a variable delay before the message
is
> cleared. The delay is based on the image size and some
> empirically-derived constants.
[Attachment Picture Update.vi, see below]
Attachments:
Picture_Update.vi ‏45 KB

Similar Messages

Is there a way to see an access history for my ipad mini? dates and times when it was accessed? not particularly a safari history, just when the pin code was last put in?

Im worried that my ipad is being used without my knowledge, I am randomly losing whole conversations from my messages although they are still visible on my iphone. I wanted to see when my ipad was last accessed before i start accusing people of messing with it.

I'm not aware of any setting or app that will do what you are looking for, but it possible you might find something in the app store.
You should consider changing your pass code and possibly using complex rather than simple pass code. And keeping the device secure when not in your possession.

HT201209 any way to see when I redeemed an itunes card

Is there any way to see when I redeemed an itunes card? I have had £2.99 go "missing" but I have been told that iTunes doesnt always update my balance??????
I checked my balance, it said £3.82, I went back to my game, tried to make a £2.99 purchase only to be told I didnt have enough funds in my iTunes account (just so happened that my itunes account was suddenly £2.99 down!)

You just make a purchase and it will deduct it.

There is any way to see your photos on iCloud. It can be Whatsapp and other apps photos too. Help me to find out?

There is any way to see your photos on iCloud. It can be Whatsapp and other apps photos too. Help me to find out?

You can browse it a little more easily with TextWranger. You can also search it:
http://homepage.mac.com/bagelturf/aparticles/library/libtw/libtw.html
See what happens when you restore a vault:
http://homepage.mac.com/bagelturf/aparticles/vaults/vrestore/vrestore.html
It actually renames your existing library and creates a new one.

I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?

I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?

BDAqua wrote:
....but some other new Macs will boot frome a clone of 10.6.8...
Only with a whole lot of effort and instability. As the new Minis have
hardware (HD4000, USB 3.0, etc.) that is totally unsupported in old OSes.
The only option would be to see if it would work by installing in a virtual machine
running 10.6.8. I'm sure there will be some performance hit but whether it would
be enough to be unusable is the question.

Is there any way you can locate my phone, it has been stolen

Is there any way you can locate my phone, it has been stolen.

Did you have FindMyPhone turned on in iCloud? If not report the loss to police, there is nothing Apple can do.
Sorry
Pete

How do I change icloud email when my apple ID has been updated to new email? Because of the update on apple ID, when I try to delete icloud account I have to put in the password, and it says username or password is invalid (because no longer apple ID).

How do I change icloud email when my apple ID has been updated to new email? When I try to delete icloud account (in settings-icloud-delete account) I have to put in the password for the apple ID of my old email address, which is no longer my apple ID, and it says username or password is invalid (I'm guessing because that is no longer my apple ID).

You will wait for the rest of your life. You need to fix it; no one else will. To turn off "Find my iPhone" and its associated Activation Lock you need the Apple ID and password that were used to turn it on. If you know the Apple ID you can contact Apple Account Security and have them reset the password (after you prove you are the rightful owner of that Apple ID). see: http://support.apple.com/kb/HT5699.
If you don't know the Apple ID the phone is permanently unusable.

Project Managers to know when a task has been updated for the last time

Hi,
I would like know if there is any timestamp feature in Project Server 2007, so that it can be possible for Project Managers to know when a task has been updated for the last time.
Thanks in advance

Hi,
If you are using the My Tasks to drive the task updates then you can use the 'Applied Requests and Errors' available under 'Go To' in the Task Updates area. Here the PM can find when requests have been approved and how many updates he/she received for a
particular task (by clicking the task name) etc.
Hope this helps
Paul

TS1398 My iphone 4S has been updated to the newest software and isn't detecting internet, although sometimes it connects for a few seconds and then disappears again. I have tried everything it has said on the internet about this and it still isn't working

My iphone 4S has been updated to the newest software and isn't detecting internet, although sometimes it connects for a few seconds and then disappears again. I have tried everything it has said on the internet about this and it still isn't working.

Ok I think it's a problem with my router. I went to my cousin's house and the Wi-Fi worked there perfectly. I was even able to download many apps. So I guess my router probably can't take in more connections. Oh well thanks anyway.

HT201299 Is there any way to see what apps are consuming the iPad's cellular data?

The rapid usage of my cellular data and resulting drain on battery life has been a real issue since iOS6. If I disable cellular data, things improve dramatically. It would sure be nice to know who the culprit is. Any apps to help with this?
Thanks!

Never heard of one - the sandboxed nature of iOS would make it impossible to build an app to do so, since apps are isolated from each other and each others data.
All you can do is the trial and error method.
A couple of iOS features to check though, are
Settings - General - About - Advertising - Limit Ad tracking = ON
Settings - General - About - Diagnostics and Usage - DON'T SEND (checked)
Settings - General - About - Date and Time - Time Zone = OFF (uses location services to check if you've crossed a time zone - unnecessary use of location services if you are not travelling outside of any wifi or cell coverage)
Settings - General - Restrictions - Location Services - System Services - all OFF (these involve transmitting location based data out, ie. from your device).

MyRio Cannot Communicate When the Getting Started Wizard Tries to Set Date and Time

I cannot seem to get MyRio to communicate with my computer. I have installed all the items on both discs and applied any updates that it asked me to do. I plug in the MyRio, the device window pops up and I click the Getting Started Wizard. The myRio is found by the computer and I click on it. It says checking software, then asks me to rename it. I do so and then it attempts to set the date and time. At this point it says it cannot communicate with the myRio and to check that the power supply and USB are plugged in, which are obviously connected since the computer was able to find the myRio in the first place.
NI MAX can see the myRio, says that it is in "Safe Mode (Software not installed)."
There may be a problem with conflicting LabViews, since I had 2012 originally before installing the 2014 packages. Does anyone know if the myRio discs are installing the full LabView 2014, or just packages for LabView 2014 that will not work without first installing the full LabView 2014? Or is there a quick fix for this?
Any help is appreciated.

There is a separate message board Academic Hardware Products (ELVIS, myDAQ, myRIO)

Is there any way to retrieve an MMS/photo that has been deleted from iphone and the phone has since been backed up?

I received some MMS messages a while back and have backe dup my phone since then. I now want to get these messages back, but they are obviously gone from my phone. Is there any way to retrieve them? I'm guessing no, but any input would be welcomed.
Thanks

connect the iphone to itunes and then select the phone and click restore from backup.
Thanks

Is there any way to see the last local of my phone after the 24 hour time frame post email notification?

Is it possible to see the last location of my iPhone if its more then the 24 hr time frame after the notification email was sent?

transon wrote:
not sure I understand. You're spending your own money to buy a Tivo to use a service Verizon provides? Like instead of expecting them to keep your equipment up to date? (or at least allow you options equal to all other Verizon customers)
I have one TiVO HD now, and adding another would be great. Have you ever used a TiVO guide and actually got what you wanted to record? I pay TiVO $9.99 a month because my commitment is up, and Verizon $3.99 a month and get everything but Widgets I don't want. VOD they charge to much for, Remote DVR programming that only works when you don't need it. I have a 1TB internal drive I installed. Get my point?
Under $15 a month and does everything I want. I thought I missed the VOD untill I got it back for 2 months and decided I didn't need it. Multi Room, don't need it. Tried it once and canceled it. The only reason I have MRDVR now was to get the discounted HD boxes which they do now anyway. Shame they started that a month after I picked up the VZ DVR.
I did sugest that Verizon partner with TiVO and cut their development cost, and that was given a not likely response. Yea if Verizon offered a TiVO with the guide TiVO provides, TiVO VOD options, Verizon VOD options, Verizon Widgets, I would give Verizon $20 a month no problem.
I had a Verizon 6216 DVR for 4 years, a TiVO still for over a year, and now a 7216 for about 2 months. I like TiVO. Sorry Verizon.

Reader SDK: any way to see what text the user has selected?

I'm using the Adobe Reader SDK with C#, looking at the interapplication communication features.
I can open a document in Reader and allow the user to user the reader tools like select text, etc.
Here's the problem: I want to have my application know what text the user currently has selected. And I'd like it to know the name of the field that the user has selected, not just the text of the field.
Microsoft Office's Interop has something like this:
currentDocument.GetSelectedText();
Is there any way to do this with IAC or the javascript or plug-in features of the Reader SDK?
If not, can it be done with the Acrobat API? I've looked through both sets of documentation, and haven't found what i needed.
Thanks for any help!

To write a plug-in for the Adobe Reader you need to go through 2 separate steps.
Step one - Download the Adobe Acrobat SDK (from here http://www.adobe.com/devnet/acrobat)
and build your plug-in against the Acrobat product, following the documentation to make sure you only use API's that are available in the Reader program. The documentation tells you what version of the Adobe ACrobat or Reader program is needed for the function and whether the function can be called in Reader.
Step two - Apply for a Reader certificate to allow your plug-in to be loaded by the Reader, the link is on the same web page as the above link. This step can be initiated before you have created your plug-in, and I would recommend that you do start this process before you develop your plug-in as Adobe can refuse to give you the certificate in which case all your development would be wasted.
Only once you have permission form Adobe can you make your plug-in work with the reader application.
Once you have done both these steps there are plenty of people on this forum that can help you with specific problems you may encounter.
If you are not sure you have the knowledge to build the plug-in, there are plenty of people that you can hire to create the solution for you.
HTH
Malcolm

Is there any way to remotely wipe an iPhone 4 without the use of iCloud and the find my phone app?

Hey, my phones been taken off me and i need to wipe it asap. i havnt downloaded and set up the find my phone app though. Can it be done?

check out www.icloud.com an log in there. Then, go to 'Find my iphone' and see if your device is listed

Any way to see when an iphone 5s has been updated by date and time?

Similar Messages

Maybe you are looking for