Any way to send unreliable data via rtmfp NetConnection

Hi,
     I'm now using NetStream with dataReliable=false to send unreliable data in my fps game.
     But some user's flash player set RTMFPP2PDisable to 1.
     So the only choice is to use NetConnection to sendData.
     But I have not found any option to set NetConnection unreliable.
   If the data sent by NetConnection is ordered and reliable, what is the difference between using udp based rtmfp and using tcp based protocol?

updated.

Similar Messages

Is there any way to send a file via bluetooth to raspberry pi?

We need to send voice recordings to a raspberry pi with speaker, is there any app already sends file via bluetooth to raspberry pi?

updated.

Is there any easy way to send free invoice via email without my credit info

Is there any easy way to send free invoice via email without my credit info?

Depends upon what you mean by 'it failed'. If it's that you are getting a message to contact iTunes Support then no, you will have to contact them (the 48 hours should be the maximum time that it takes for them to reply).

Any Way to Add the Date to Pictures in PSE 4.0??

I've just started using PSE 4.0, and am new to the forum.
I don't see any way to add the date to a picture. I want to be able to add the date to the picture file for sending to a commercial source for printing. In my search in this and other forums, it appears there was a feature to add the date via Print|Show more options|Label|Date in PSE 3.0, but the "Date" seems to have been eliminated in 4.0.
I've used a separate program (Exifer) for this in the past, but doing it one picture at a time is tedious at best, and very time consuming. With all the capabilities of PSE, I'm amazed that this isn't an obvious capability.
Any advice would be greatly appreciated.
Tks...Thksnow

Barb -
You are absolutely right. Unfortunately the Date function under Caption put an entire date and time stamp on the picture, which is not what I want. All I'm trying to do is put a date stamp on the picture similar to a dateback on a 35mm camera (yes I still have a few of those!!), which we really like to have for our family photo albums.
The best I've figured out from a suggestion on another forum is to use the Watermark function under the same Process Multiple Files area. The downside is that I have to put the date in manually, as opposed to automatically from the file data, but it's better than doing it with another program.
Bryan

TA38622 is there any way to send sms by a connected iPhone to computer ? if so does it need any special application and program ? with witch port ? thank you.

is there any way to send sms by a connected iPhone to computer ? if so does it need any special application and program ? with witch port ? thank you.

Hi, Santosh..., and welcome to the Community,
I would recommend testing the SMS reply forwarding to your mobile number. Depending upon the results and if this works for you, you could then contact Skype Customer Service to cancel and request a refund.
In other words, SMS will be received via your mobile number, not via your Skype Number.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Is there any way to turn off data and use only wi fi

is there any way to turn off data and use only wi fi, going to a foreign country and do not want to use data but wi fi will be available. I want to be sure to use only wi fi

Yes there is!
Simply go into Settings, General, Mobile Data, Turn this off and make sure Data Roaming is also switched off! You can have wifi on and this will no charge your account for the data you use via Wi-Fi!

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone.

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

Is there any way to retrive the data from my USB Key

Hello,
I have a usb key I have been using on a Win 7 desktop computer and a Mac Book Air to put in Data on a spread sheet.
I interchange to put in the data between the computer and my MBA without any problem.
I am today not able to open the usb memory key in either-Computer or the MAC Book Air.
Does that mean I have a coruppted USB memory key and the data lost for ever?
I have just put the USB memory key in my computer and it says File System CDFS.
I put it in MAC Book Air and it would not open either!!
Is there any way to access my data. I have no back up...

If the USB drive won't mount on either computer, it's probable that the drive has failed, in which case it's unlikely that you can recover any data from it. You can do a web search for something like "flash drive file recovery" and you'll find a number of utilities that purport to do file recovery, but all the utilities I'm familiar with require that the drive at least be mountable. There may be services that could attempt recovery, but they tend to be expensive.
The moral of the story is: never have only a single copy of a critical document, and if you must, never, never have your single copy only on a flash drive (or floppy, for those "old timers" who still use floppies).
Regards.

Is there any way to print the data inside the Notes field of MIR6 Report

Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.

There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

Iphone 3GS was dropped and will not turn on or respond to USB connection. Is there any way to extract the data off when it is not responding so that I can restore to my new phone?

The phone is physically intact, but you can see the LCD is cracked behond the glass. I have tried plugging it in, tried putting it on the charger, and resetting it using the off and home buttons, bit response. I don't need the phone to work, but I do need to be bale to back it up in order to restore to the new phone. Is there any way to extract the data or back up the hard drive without repairing the phone? Just curious what my options are before I spend cash trying to fix the phone and find out there was another way to get the data. Any thoughts here or should a good repair shop being able to create a backup somehow?

Im not going to be much help because I don't know of anything else to besides take it somewhere that fixes electronics and see if they can get it off some how maybe if you take it to an apple store they can do something to get your information.

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?

Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?

Only if this program will get the iPod out of recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode

I'm forced to use a xoom for work. Is there any way of installing android ICS via virtual machine or any other mechanism?

i'm forced to use a xoom for work. Is there any way of installing android ICS via virtual machine or any other mechanism?

On the iPad? No.

Any way to send unreliable data via rtmfp NetConnection

Similar Messages

Maybe you are looking for