Any way to set DV Audio sample rate in iM4?

Does the first DV capture determine the project rate or is it always 32K. It was 48K in OS9/iM2.
Thanks for any ideas/help,
Rocky

<narf!><grabbin for sunglasses>
Patrick! my eyes!!
my son would call you a "Barbie Fan"!!
sure, that out of sync with longer imports is a frequent issue here ... for NTSC users. (48kHz audio/29.95 fps = ??? there HAS to be a "gap") I don't have any trouble as PALuser on that, but I dare to post: import in smaller segments (esp. iM6 users), and try this tool:
movies out of snyc fix
http://www.3am.pair.com/MovieSync.html
that color fits perfect to my hair..

Similar Messages

  • How do you set sequence audio sample rate?

    I tried posting this to another, but it was already answered, and noone will see it.
    I am getting the capture error "audio sample rate doesn't match" and yes, I can see in my browser that the clip is 48khz/16bit, but the sequence is 48khz/32 bit. Howver, wherever I look to change the sequence setting, it is 48/16 already. I've gone to FCP on the menu dropdown to audio/video settings - it's correct all through there. I've gone to the menu dropdown Sequence settings, and it's correct there. I've closed down, opened a new sequence, restarted, everything I can think of. Is there a secret to getting them to match? And, can I fix a project already edited with this discrepancy? Its export to QT is WAY out of synch.

    Annoying - I can't see your post when I am in reply mode.
    Yes, I get this error when i am capturing. From reading a previous post about the error, I thought the solution was to check the audio rate of the captured clip in the browser, and then make sure it matched the audio rate of the sequence. Like I said, everywhere you get to change the sequence setting, it SAYS it is 48/16, but yet, whe I scroll over in the browser, it says the audio rate is 48 KHz and the audio format is 32-bit floating point. Am I looking at the right places?
    I can't check the settings in the camera until this evening...don't ask.
    I'm not so sure this is not a QT issue instead of anything to do with capturing, etc. It plays back fine in the timeline.

  • What is the best way to deal with different audio sample rates on the same timeline ?

    what is the best way to deal with different audio sample rates on the same timeline ?

    You don't have to do anything special. If possible, start your project with a clip that has the desired target frame rate and audio sample rate, and your project parameters will be set automatically. Other sample rates will be converted under the covers.
    For example, if your video is shot at 48khz, you can add music files at 44.1khz with no problem.
    If you are recording audio that you want to synch with video (multicam), you will get best results if everything is 48khz, but you can use 44.1 if that is all you have. Once I forgot to reset my Zoom to 48,000 and it still worked.

  • Capturing issues-audio sample rate & locating timecode break

    I am a first time FCP user.
    I am working on an educational video with hours of DV source tapes.
    The source tapes are from a 2R50MC Cannon mini DV camcorder also used as the deck I am capturing from via firewire. My scratch disk is Maxtor III 500GB external drive hooked up via a firewire (I'm realizing the firewire is years old could that be a problem?)
    In my first capture test I captured 1 minute of tape by setting in and out points and after completeing the capture I received an error message—"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
    For the past day I have been scouring the user manual, this discussion group and training tapes from Lynda.com and can not resolve this issue. I have determined that the source tape is 12 bit or 32 kHz and yet can not find a way to set up capture preferences to 32 kHz. Is this the problem/resolution? Page 320 of the user manual shows the QuickTime Audio Settings dialog box but I can't find it in FCP or Quicktime. Is this where I make the change to 32kHz?
    After doing the first test, I tried again and ran into a new problem—it stopped capturing with the message: Locating timecode break [press esc to abort]. It never seemed to resume capturing and I pressed escape to abort. If I'm reading FCP time code window correctly I received this time code break message within a section I had already captured previously (with the audio sync warning).
    I have done several capture tests at different points in the tape and on different tapes all with the same results. I've used the capture clip and capture now buttons. I've tested with drop frame turned on and off. Confirmed my setting of: At timecode break "Make New Clip." Confirmed my Easy Setup as DV-NTSC. My capture preset is DV NTSC 48 kHz. I've turned off and on FCP. Restarted my computer. Restarted my computer with the shift key down and ran permissions.
    Any ideas are GREATLY appreciated, T.

    I am concerned about available memory when capturing to my hard drive and the babysitting and extra steps involved considering the amount of tape I want to capture...but it does work that's GREAT!
    This is always a concern, but in your case I think having the camera and external on the same bus was causing your problem. You may have to capture a little and then transfer, rinse and repeat. Just don't try to do too much at once and let your System Drive get too full, you'll run into other problems there. Slow and steady is the pace!
    I shouldn't have stacked my questions since you answered one and Chris answered the other. Don't know how to apply the answered question and who gets the points.
    No problem, just mark it answered and divide up the solved and helpful points as you wish. All in all we really don't care too much about the points, but they do make us feel good! Thanks for your desire to use the forums properly.
    K

  • Geting audio sample rate error, help

    Hey all, been doing a massive project where I ma bring in tons of old 8 mm tapes, hi8 and digital 8. This one tape I brought on though however is giving me grief. I keep getting this error:
    The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape.
    If find this odd though cause the tape should be standard, NTSC dv 48 K. Any suggestions. Also how do I reset my final cut so that when I plug in a camera it always reads it as what it recognizes. I ask this because I had to used the setting uncontrollable device because on the original old 8mm tapes there is no time code so I had to capture that way.
    Anyhow, any suggestions on this would be great for if I recapture. Cause I could line it up by eye but want to find the problem so I know for the future. Thank you.
    Nathan

    This is a recent problem that seems related to a recent upgrade of QuickTime. Here's why.
    In the last month, a rash of these posts have begun to appear:
    "DV Capture Audio problem"
    http://discussions.apple.com/thread.jspa?messageID=6708693&#6708693
    "audio/video"
    http://discussions.apple.com/thread.jspa?messageID=6591262&#6591262
    Plus this thread, plus my own.
    In my case, nothing changed in my operating system or Final Cut Pro version. I upgraded to QuickTime 7.1.6, and the problem began. I have upgraded all the way to 7.4 to no avail. When I attempt to import a DV clip using the same Sony DVCAM deck that imported the same clip in December, I get the error every time. Nothing has changed in the tape, the deck, the Project or Final Cut. I am simply unable to import DV video. I can import other kinds (Panasonic P2, for example), but DV is a no go. I cannot get rid of this error.

  • How do I change the audio sample rate from 48kHz to 44.1kHz for Mpeg2

    Hey all,
    I've been searching for a while but haven't found any direct answers in the forums or the user manual so here goes.
    I have to dispatch a file to Bloomberg TV and the file specs they have given me are as follows:
    Video Standard: MPEG-2, MP:ML, 4:2:0
    Frame Rate: PAL 25fps
    Video Size 720 x 405
    Aspect Ratio 16:9
    Audio Standard MPEG-1 Layer 2
    MPEG-2 Program Stream Mux rate 6mbs per second
    Bit Rate Type: CBR
    Video Bit Rate 5.7mbs
    Audio Bit Rate 192kbs
    Audio Sample Rate 44.1Khz
    Interlacing: Upper Field first (why they want interlaced for web streaming is beyond me)
    GOP Structure: IBBP
    I-Frame distance 12
    Now everything above is fine except the audio encoding because even though I have set up a new setting from scratch I cant find anywhere to adjust the audio sample rate. The Inspector tells me the Audio encoder is set to:
    Format: MPEG
    Sample Rate: 48.000kHz
    Channels: 2
    Bits Per Sample: 16
    Anyone Know how or even if I can change these audio settings? The only adjustments I can find are the filters or the transport/program stream option. I have it set to program as specified by Bloomberg.
    Thanks in advance
    J

    The only setting that I could find in compressor that lets your change the bitrate to 44.1 is when you create a new dolby digital setting and then under the inspectors audio tab/Target System button, change the button to Generic AC-3. When done, you can change the Sample Rate to 44.1.
    Hope this helps?

  • Can I set an arbritrary sampling rate in Biobench (need 60/sec to sync to video)?

    Is there a way to set a sampling rate that is not in the drop-down menu in Biobench? Thanks!

    Hi George,
    BioBench comes with a set of predefined sampling rates. I encourage you to try using LabVIEW to trigger/sync your DAQ with video. The sample freq. in BB are std. for low freq. biomedical signals.
    Please let me know if you have any further questions.
    Regards,
    Morten Jensen
    National Instruments

  • Highest audio sampling rate in CS4?

    Hello,
    I apologize if this has already been asked, but I have been searching everywhere and I simply cannot find the answer to this.
    What is the highest audio sampling rate that can be utilized in Premiere Pro CS4? Can it import and export 192kHz 24-bit audio?
    Thanks in advance

    Hey Hacienda,
    I might not have the experience in audio work you have since I've only been doing this for the past 6 years or so.  But I've been a musician for far longer than that, and I've learned A LOT mostly from really smart people in the industry.  So, I'm not gonna lie to you and say that I've done extensive testing in this area because I simply do not have the equipment, nor the money to buy it (WAY too expensive).  But we do share the neophyte status when it comes to video editing :-P
    Anyways, the Nyquist Theorem is not a theory, which is what people are led to believe.  It is a theorem, meaning it's already mathematically proven.  It is proven that, as long as you follow the premise of capturing twice the highest frequency of the sound source, you'll get a perfect reproduction of it.  To capture more than that is a waste of bandwith specially because most people won't even hear above 18KHz, nor do they have the equipment to reproduce such frequencies.  Most consumer systems and audio gear, including those found in professional studios, go up to about 22KHz.  You need to spend BIG dolars for anything that goes beyond that.  So, who are we really making music for here?  The super rich?  Dolphins?
    Now, I know you're not just talking about higher frequencies, but the amount of samples needed to recronstruct a perfect copy of the original waveform.  OK, well, this is the kind of snake oil marketing BS I was talking about.  The biggest one being that 1bit DSD crap that Sony/Phillips is pushing.  Adding more samples to the recording will not make any difference on how faithfully you can reproduce a sound.  It'll just make the files bigger for no reason.  Again, the Nyquist Theorem already proves this.  This is FACT!  Here's a link I found interesting regarding these audio industry lies, maybe you will too: http://theaudiocritic.com/back_issues/The_Audio_Critic_26_r.pdf It starts on page 5, but the one pertaining this discussion is lie #3 on page 6. :-D
    Don't forget that modern converters already sample at much higher frequencies than the target sampling rate.  I believe my RME Fireface 400 samples at 5.6MHz, which is twice the amount of samples compared to DSD technology, before going back down to the target rate.  But, like I said, it does so for other reasons and NOT because it needs that many samples in order to faithfully reproduce a waveform.  Of more importance are the quality of the FIR (Finite Impulse Response) filter and the clock inside the converters.  These components are what make a converter high grade, among others.  The converter chips themselves are very inexpensive (in the tens of dolars) which why you hear some companies advertizing having the same converter chip as a ProTools HD rig (not the best example I know).
    By the way, I didn't say humans can only hear up to 20KHz.  I'm sure there are people who can hear above that.  My point was that the 20Hz - 20KHz range is what's generally accepted as an average for humans (which implies that there are people who can hear avobe/below that).  Also, the reason why modern-day pop records causes headaches and sound horrible is because of a totally different issue known as "The Loudness War" (I'm sure you know about it so I won't go into details).  However, I do agree with you as far as compressed audio goes.  Unfortunately, there's a reason for that and there's nothing we can do about it until the day Internet bandwith becomes more accessible and cheaper.  Eventually it'll get to the point where uncompressed audio can be streamed reliably through the net.  But, until then, we're stuck with MP3, AAC, DTS and other audio compression formats.  As far as digital media distribution goes, it's the future and companies are seeing that.  More and more people download music rather than buying CDs, so I do believe those numbers are accurate.  Just look at sales from iTunes and even games like Guitar Hero and Rock Band.  It's just a matter of time.
    Take care!

  • DV 16:9 but Only Exports 4:3 WHY? Also Audio Sample Rate Problem

    I'm quite new to Final Cut and have FC 6.01. I use PAL 25fps and a 16:9 SD DV Camcorder with FireWire SONY DV VTR Deck. I have two problems:
    1. When i capture my 16:9 DV footage the Logging Window shows only 4:3 with a distorted image in it. Though I have chosen the easy set up and told Final Cut that im editing Anamorphic 16:9 I also found that FC will only export 4:3. However, during the editing process i see 16:9 in the Browser Preview and Canvas Window.
    2.(Not sure if its related) I get the following message everytime after I capture individual clips or if i press the Escape key during a capture:
    "The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your captured preset matches the sample rate of your tape"
    Does any one else have this problem?
    Apple, as yet have not given me any answers.

    Danny Boy.. Thanks for your reply and I'll be happy if it is my fault and not FCP's. Actually i made an error in my post. It does indeed display correctly in DVDSP, it's iDVD it does not even when told to display it in 16:9. However, when i used the PAL DVD Anamorphic file preset, iDVD still couldn't display it. To get it working I had to tell Compressor specifically (in the additional settings) to encode 16:9 despite what the presets stated! No matter how one looks at this, this is confusing to say the least! If a preset says 16:9 then one should expect 16:9! Remember, Im using the display window of iDVD to show me the output.
    To detail my steps as hanumang has said, im doing the following:
    1. in FCP I encode to QuickTime Move
    2. Open iDVD & Create a Project
    3. 'Drag' The QT file into the menu
    4. Using iDVD Preview function, Preview the QT file
    5. ITS STILL 4:3
    now, the above was done with QT Conversion which as also set to encode 16:9 and still had the same result.
    Thnaks to you both.

  • Capturing-audio sample rate

    I have fce hd v 3.5. My camera is a sony dcr-trv11. I am trying to "capture now" but it looks like I am dropping frames. When i hit "esc" it stops capture of course, but I get a message that reads "the audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video ans audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape." Okay, so how do I do that? When I originally captured my footage with imovie I had no problems. I had trouble importing them to FCE so I scrapped them all and decided to start from scratch with FCE. I have 199.5 GB of free space.

    Most miniDV cameras can be set to record audio as 12-bit or 16-bit; and most of them come set to 12-bit as the default.
    Your preset (easy setup) in FCE has to match both the video & audio setup of your camera. Normally, you would select the DV-NTSC easy setup in FCE, which would give you a sequence that expects DV-NTSC video and 16-bit (aka 48KHz) audio. If your video was recorded as 12-bit (aka 32KHz) audio, but you captured into a 16-bit (48KHz) sequence in FCE, that would give you the mismatch.
    Check your camera - if it was set to 12 bit audio for the tape you are trying to capture, then in FCE you should select the DV-NTSC 32KHz easy setup for your sequence before you capture your tape.
    There are many different reasons you might be getting dropped frames - can you tell us more about your exact setup, esp. if you have an external HD connected to your system. Oh, and by the way, 512MB is the bare minimum to run FCE, you will find things much better overall if you upgrade to at least 1GB.

  • Correcting audio sample rate

    I keep getting this error: "The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
    I used a Sony 3CCD cam set at 48K, I set FCP to Easy set-up, I have FCP Studio, easy set up is on all formats, all rates, NTSC.
    I replay the clips and the audio seems fine, but I don't trust it with this error.
    Anyone have any ideas????

    Hi(Bonjour)!
    Make sure that your sequence settings is 48 kHz 16 bit for audio.
    Michel Boissonneault

  • Mismatching Audio Sample Rates Upon Capture

    I recently bought a cheap MiniDv JVC video camera, and I am having trouble capturing video and audio together in FCP 6.0. The capture seems fine, but when I finish an error pops up which reads: "The Audio Sample rate in your presets does not match the one on your source tape." As a result there is a delay between the video and audio tracks that creates huge amounts of extra work.
    My video camera captures sound in 12-bit format, and from what I understand that usually corresponds to a 32MHz sample rate. I can't find any 32 MHz presets in the Easy Set Ups or other menus, the system seems geared entirely towards 48 MHz sound. I've messed around with some different combinations of settings, but so far to no avail. Any help someone can give me will be much appreciated.

    You might want to duplicate the capture preset for DV/NTSC 48k and change the audio to 32k.
    Then try that.
    But I'd also change the JVC's audio settings to record in 48 while you're waiting. Should be able to do it... cheap or not.
    CaptM

  • MiniDV audio sample rate issue

    I cannot get the audio sample rate to match. I have captured miniDV footage (32mhz/12bit). In Sequence settings the audio options for bit are 8, 16, 24. My audio is out of sync!!!! What can I do? I have 2 hours of raw footage and can't proceed! Any help is VERY appreciated. thanks in advance!

    Hi again!
    Hum ... that´s not as simple as it could be!
    That way i´ll have to capture twice?!
    There must be another way of doing it , i don´t think Avid can do it and FCP don´t .
    As i told you i use both systems and i know they´re limitions (or i think i know!), but it´s strange because Avid Xpress DV 3.5 (from the age of stone ) do it in a blink ... ok ... found an FCP limitation!
    Thank you!
    If there´s another way ... please feel free to post it!
    (and is was supposed to "reply" a "miniDV audio sample rate issue.
    HBars

  • Audio Sample Rate Query

    Hi FCE users,
    I am about to start capturing 4 hrs of wedding video. I have a fair bit of experience on FCP but am new to FCE and its variations in functionality.
    When I ran a quick capture test, it warned me on completion that the audio sample rates were different. The video was shot in Hungary and I have no way of contacting the videographer, however I assume that it was recorded in 32khz as when I changed the capture preset to this, no warning message occurred. The DV cam I'm using most helpfully doesn't display a bit rate but given that no warning occurs after capture, I'm happy to go with the 32khz preset.
    Most of the articles posted on the net however state that the 'SEQUENCE PRESETS' as well as the 'Capture Presets' need to be changed. Almost all of it relates to FCP, as opposed to FC Express.
    The equivalent on FCE - 'Sequence Settings' doesn't seem to offer a 32khz option, and the Audio Rate shown in the Browser seems to be fixed to 48khz.
    My question is:
    Does the sequence setting variation matter? - Do I assume that given the scaled down functionality of FCE that it takes care of this automatically OR that 48khz is a fixed audio rate for sequences in FCE and all non 48khz audio clips needs to be rendered prior to output.
    No doubt I will be bringing music from CD's in to the project and sequence also, so your help would be greatly appreciated.
    I don't want to bring in 4 hours worth of footage and then have to recapture!
    Thanks for your help!
    Rich

    Thanks for your swift reply Tom.
    I've just re-reviewed the menus. I can display the 12/16 info on record, but it doesn't offer it as a playback display option. However... I've just recorded more footage into FCE and received no error message with the capture preset on 32 so can I be fairly confident that its 32?
    I've just figured out how to change the sequence format to 32 (it seems to be created by default with capture preset set to 32, wheras I was trying to alter an existing sequence).
    Rich

  • Audio Sample Rate Warning

    After I capture video with audio, I get a warning that basically says I've dropped audio frames because the Audio sample rate and tape rate aren't the same, but they are both(presets and camera) set at 48 kHz. Video is fine. Can anyone help?
    My DV camera is a Sony DCR - HC1000.
    Thanks,
    Maddie

    Welcome to the forum Maddie,
    First, check 'item properties' of your captured clips..you can do this in the browser columns or control-click the clip and select 'item properties' then format.
    If the clips properties are not exactly 48kHz, you can export them using QT, iTunes or FCP.
    Do the clips play in the timeline now? Do you see any colored bars either at the top edge of the audio clip or at the top of the timeline above these clips?
    Kevan

Maybe you are looking for

  • How to set the table input in Query template?

    Hi all. I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). 

  • XI with ABAP stack only ?

    Looking at some very annoying problems with the XI Java Stack and applications (stability, memory consumption), following question comes to mind: is it technically possible to run an XI system without the Java stack ? How much functionality do we hav

  • How to put a startup picture in a java program?

    Hi there, I'm extremely new in Java programming and have a very weak knowledge in C programming. I managed to download a Java source file from the internet which I need to use for my school's project. I was wondering would it be possible for me to pu

  • Stop download of movies in itunes

    When I was setting up iTunes in my new MacBook Air, I was moving music files from iTunes to the computer and it kept trying to download the 4 movies I have in my account.  I watch them still on my iPhone and iPad, but do not want them taking up space

  • PCI vs PCIe - compatible?

    Dumb question: I have a G5 - first generation dual 2 Ghz - that I'm getting rid of because I bought a Mac Pro. But the G5 has an ATTO U320 card and a Blackmagic Decklink Extreme card that aren't PCI express, they are older PCI cards. Will they not wo