Any way to set iCloud document sharing to view only as default?

When I share icloud docs I would prefer that they are view only, is there a setting to put this as default?

No. You can't pre-fill the Save As dialog. What you can do is offer the new
name in a prompt window just before the file is saved, or you can use a
script that automatically saves the file under the new name (this requires
the script to be installed on the local machine, not just to be embedded in
the PDF file).

Similar Messages

Question - any way to set a Page Item in a worksheet to default to All ?

Well, I seem to have run across an interesting situation here. I have a table worksheet with page items. I have noticed one thing while testing this new worksheet/workbook. If I pick a value for one of the page items (and with page items, it seems I can only pick one value at a time) and then save the worksheet, close the workbook, and then reopen the workbook and run the worksheet, Discoverer has retained the page item value as the value when I saved it, rather than defaulting back to <All>. So I quickly learned a new lesson with this darn Discoverer product - make sure all page items set to the <All> value before I save a worksheet that I am going to want to promote to Production.
Well, now I have run into a situation where based on the conditions I have to set in the workbook, I have a Page Item in the worksheet that today has only 1 value that pulls into the worksheet. When I do the drop down on that Page Item, it only shows the one value. It does not give me the ability to pick the <All> option. So I am unable to save the workbook with the <All> value today for that page item. There are other potential values for this Page Item that could show up in the future.
Now granted if this were to happen, the Viewer user could do the drop down on the page item at that time and pick the <All> value at that time. But alas, since they are not the owner of the workbook, they could only save as a new workbook, with themselves as the owner - cannot change the production workbook so it would be changed going forward. This also means the user has to realize that they are missing data and that the fixed page item value is the cause of that, which I am skeptical that they will be able to figure out. So I really want this page item value to default to <All> when the users open and run this worksheet.
So here is my question - does anyone know of a way to set the Page Item value to be <All> automatically when a worksheet is run?
I hope this makes some sense. Always a challenge to explain an issue well. It took me a bit to realize that when saving a worksheet/workbook, it was retaining the selected page item values when I performed the save. It is also very unusual to have a situation where a page item does not currently have multiple values. So this may be a situation that few people have run across.
John Dickey

Ah, there is a potential workaround, as I have finally figured out. The workaround does require that you have the ability to bring in multiple values for the page item from the worksheet run result set. If you have a situation, like I have, where today you only have one valid value, you will still have a problem.
The workaround is this. Figure out a way to get multiple values into the worksheet run result set. That way when you do the page item drop down list, you will see the <All> value in that list. Pick that value, refresh the worksheet, and save the workbook. Now reset your worksheet back to your desired conditions, where you end up with just one value in the worksheet result set, and refresh the worksheet. The <All> is still retained as the page item default and when you do the drop down list for the page item, you see two values in the list - your 1 valid value plus the <All> value. So once you get that <All> set as the page item default, then it will be retained. This explains how support originally tested (on an existing worksheet) and said they were able to see and pick the <All> value.
Since it should be rare for something to have just one valid value in a worksheet result set, and even rarer to have just one current valid value in Oracle, this workaround should take care of most of the situations where you might encounter this issue. I still will push for an enhancement request to have that <All> value show in the drop down list even when just one value in the worksheet result set.
John Dickey

I just got my daughter a new macbook pro. She currently shares my wires apple id for iTunes on her iTouch. I need to set up an email account for her. Is there any way to set up a new iCloud email account but still use my wires apple id for iTunes?

I just got my daughter a new macbook pro. She currently shares my wifes apple id for iTunes on her iTouch. I need to set up an email account for her. Is there any way to set up a new iCloud email account but still use my wifes apple id for iTunes?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?

My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?
It would be so much easier having seperate accounts but we have hundreds of her purchased songs on my account and she would need to be able to access these from her account. Possible?
Also, if we bought a song in future we would want to be able to both have access to it.
Alternatively, what is the easy way to sync two distinctly different contact lists to one iTunes account?
Thank you in advance.

FYI: iTunes account (used to make purchases) is not the same as iTunes library (iTunes on your computer with music, movies, etc.).
ecbclb wrote:
Will we have to create a seperate account for her, or can we all have the same one?
You can but you will not be able to limit what she syncs.
I would like to avoid 'checking' and 'unchecking' individual songs every time one of us tries to synch our ipods to the library.
I don't recommend using (only) the checkmarks to select what to sync.
Each of you can create your own playlists then sync only those playlists.
Then add/delete from your own playlists to change iPod content.
The only time I uncheck items is if I rarely/never want to sync them to anything, such as Christmas music or old audiobooks.
I suggest you each have your own computer login account. Then everyone has their own contacts, calendars, and everything else.
You and your husband can share an iTunes library and let your daughter have her own.

Is there any way to set up icloud with Windows XP?

Is there any way to set up icloud using a PC with windows XP?

Yes there is.
There are many threads on this forum discussing this issue already (it's good to search before asking the same quesiton again).
There is a simple hack to get iCloud control panel to work on Windows XP to give you synced access to Contacts, Calenders, Reminders and Bookmarks. It also can be used to set up your me.com mail. Photostream doesn't work.
I found a solution here, have written it up in clearer english and added details re IMAP support for me.com addresses here:
http://xlii.be/s/1ii
In summary:
You need:
Unpacking program e.g. 7-Zip or WinRar
Orca MSI editor
The iCloud setup hack for Windows XP:
Download iCloud Control Panel for Windows.
Open iCloudSetup.exe file with WinRar or 7-Zip and extract.
Navigate to and open the iCloud.msi or iCloud64.msi (for 64bit systems) with Orca.
In the left table select LaunchCondition. Then change in the right table “VersionNT> = 600” to “VersionNT> = 200” and Save.
Run modified iCloud.msi and install.
Run iCloud Control Panel, located in the Windows Control Panel, and set up as you want.
I've had reports that you need to keep the files extracted from the .exe file in the same directory during installaton of the .msi file.
Have fun!

Is there any way to set up my iPhone as an iCloud backup after I've already set it up as a new iPhone?

Is there any way to set up my iPhone as an iCloud backup after I've already set it up as a new iPhone?

If you mean you want to restore from an iCloud backup, go to Settings>General>Reset>Erase All Content and Settings, then go through the setup assistant again and when given the option choose to Restore from iCloud Backup (see http://support.apple.com/kb/HT1766).

Is there any way to recover deleted documents in pages?

Is there any way to recover deleted documents in pages, or off of icloud?

Youi can look in the Trash. If it hasn't been emptied, the file may still be there.
Jerry

Is there any way to block PDF files sharing from iPad to any another device or cloud? We need to have certain PDFs visible and readable only from iPad.

Is there any way to block PDF files sharing from iPad to any another device or cloud? We need to have certain PDFs visible and readable only from iPad.

There are "container" apps emerging for the iPad. Enough searching & I suspect there would be one for your needs.
All in one Application that emphasize security
Good Collaboration Suite Secure mobile app-to-app collaboration.
The Good Collaboration Suite includes Good for Enterprise, Good Share and Good Connect secure mobile apps, simplifying access to email, calendar, contacts, tasks, instant messaging, browsing and document sharing. These apps are built using Good’s next-gen containerization that includes secure data sharing between any Good secured app as well as app-level encryption independent of the device used."
http://www1.good.com/applications/

My power just went out for a few seconds- is there any way to restore the document I was working on?

My power just went out for a few seconds. Is there any way to restore my document? I had already had 2 hrs worth of work for an interview tomorrow and do not have time to start from scratch?

UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
Recovery Mode
http://support.apple.com/kb/HT4718
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
General purpose Mac troubleshooting guide:
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
You should have TimeMachine saving your work, YOU need to be doing Save As somewhere else as you work, you don't say what application and whether you have Lion 10.7 or later (10.8.4)
Can't say enough for the importance of using a UPS. Get one and plug your modem, router, computer into one and don't worry about data loss and lost modem or corruption or the effects to electronic devices.
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro

Is there any way to set default column widths in the Finder's Column view

When my Finder windows open in column view, all the columns are always VERY wide. I have to then spend time resizing them to a managable width. Is there any way to set default column widths in the Finder's Column view?
<Re-Titled By Host>

No, because you can't set a columns view default.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I forgot the password to a pages-document, is there any way to reset the document?

I forgot the password to a pages-document, is there any way to reset the document?
Thank You

No, Apple can't help. Just connect the iPod to your computer and restore via iTunes. If necessary, place the iPod in recovery mode. For that mode see:
http://support.apple.com/kb/HT1808

Any way to convert PDF document in to Tiff format with inbuilt IBR features

Is there any way to convert PDF document in to Tiff format with inbuilt IBR features?
In our Webcenter Portal app, we create the PDF document with the content of ADF pages and check it in UCM using RIDC api.
There will some batch job which will retrieve the documents from UCM and send them to client internal Document management system. The client / batch job will only process TIFF files. So we need a way to convert the PDF into TIFF. We are okie to have both PDF and TIFF stored in UCM.
When i have done research, i could only see components like PDFexport or TIFFConverter which only converts the other formats into PDF. But i am expecting a reverse conversion. Is it possible ? Thanks

949767 wrote:
Is there any way to convert PDF document in to Tiff format with inbuilt IBR features?
In our Webcenter Portal app, we create the PDF document with the content of ADF pages and check it in UCM using RIDC api.
There will some batch job which will retrieve the documents from UCM and send them to client internal Document management system. The client / batch job will only process TIFF files. So we need a way to convert the PDF into TIFF. We are okie to have both PDF and TIFF stored in UCM.
When i have done research, i could only see components like PDFexport or TIFFConverter which only converts the other formats into PDF. But i am expecting a reverse conversion. Is it possible ? ThanksYa actually I got a tool that could [convert pdf | http://www.allbestapp.com/products/pdf-converter.html] to other formats, including jpg and tiff. that may fit your need.
You could take a shot through the link above.
Edited by: user13548958 on 2012-8-23 上午10:49
Edited by: user13548958 on 2012-8-23 上午10:52

Is there any way to set a password so that txt messages only open when the password is entered

Is there any way to set a password so that txt messages only open when the password is entered?
Please help! Thanks for reading:)

Hello Damien,
There is an option to set a passcode for the entire iPhone. You can use the following steps to set this up:
You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
Once enabled, you will be prompted for the passcode whenever you:
Turn on or restart the device
Wake the device
Unlock the screen
Note: You can specify the amount of time the screen must be locked before requiring a passcode.
You can find the full article here:
iOS: Understanding passcodes
http://support.apple.com/kb/ht4113
Thank you for using Apple Support Communities.
Best,
Sheila M.

Is there any ways to retrieve i document i empty the thrash

is there any ways to retrieve i document i empty the thrash

"Data Rescue II"
VirtualLab™ Data Recovery
DriveSavers Data Recovery
http://www.stellarinfo.com
FileSalvage

Best Way To Set Up Screen Sharing Over The Internet

What is the best/simplest way to set up screen sharing over the internet so I can remotely control my Mac at home from my Mac at work? My Mac at work is running 10.5.6, my Mac at home is running 10.4.11.

simplest
Get both Macs up to Mac OS X (Leopard). Then use Apple's MobileMe Back-to-my-Mac service.
Or, use iChat screen sharing along with the iChat free 3rd party Chax add-on which allows selected iChat Buddies to auto-accept an iChat screen sharing request. Free AOL Instant Messaging accounts can be used as the iChat accounts.
If you do not want to upgrade all systems to Leopard...
Next would be using the free LogMeIn.com account, or similar service. This will work
The above avoid needing to figure out how you get through the home routers, and provide encrypted screen sharing sessions.
After that you need to arrange for router port forwarding. If you want secure connections, then you should arrange to port forward the SSH port 22, then use ssh tunnels for VNC based screen sharing connections. There are GUI based utilities that will help setting up SSH tunnels. Do some searches over at VersionTracker.com or MacUpdates.com

Any way to set iCloud document sharing to view only as default?

Similar Messages

Maybe you are looking for