Any way to set snooze time on the Alarm Clock

The default snooze time on the Alarm Clock is 10 minutes. Any way to set it to 5 minutes?

No, but there's and App for That.  Try Garage Bank for iPad in the App Store.

Similar Messages

  • HT1688 Is there any way to set password to protect the location service, to keep GPS open? so, the theft cannot turn it off so easy, because once the location service is turn off, all GPS track is useless...

    Is there any way to set password to protect the location service, to keep GPS open? so, the theft cannot turn it off so easy, because once the location service is turn off, all GPS track is useless...

    That is what Activation Lock of iOS 7 does
    In addition, it renders the iPhone totally useless to anyone who doesn't know your Apple ID and password.
    Allan

  • Is there any way to set a timer for particular playlist?

    i would like to listen to a sleep playslist everynight without getting up to turn it on. is there any way to set it in advance?

    this is not the problem. i know how to open iTunes when it starts up and to schedule the computer to shut down. what i want to is at 8 pm close all applications except iTunes, put the display to sleep and at 9 pm start playing a sleep playlist. i have been told many times not to look at the computer an hour before bed and i so i want to avoid having to look at it to start my go to sleep playlist.
    i have looked at a number of programs but i don’t see one that does this yet.

  • Any way to set up Time Capsule as wireless router WITHOUT Airport Utility?

    I'm Macless at the moment and I just had to reset my Time Capsule... now it's showing up as Apple Network blahblah and it's completely visible and unprotected.
    Tried the usual 192.168.0.1, .0.2, .1.0, .1.1, .1.2 without any luck. Any way to do this? Do I need to be plugged in via ethernet?
    Thanks.

    AirPort Utility is the only way to configure the Time Capsule.

  • Is there any way to run a timer on the presentation screen during two consecutive presentations?

    I administer exams that require running two consecutive presentations and interact with the person being tested. With each candidate we use two different presentations, so I can't just make only one presentation.  Is there a way to have a timer display on the presentation screen through both presentations? Each person only has thirty minutes to get thru both presentations. If one only takes ten minutes, then they have twenty for the final one. I'd like to get away from using egg timers.

    take a look at this thread, you can find some useful info about running old and some new games on Booklet there.

  • Is there any way to set input levels on the built in iPad mic?

    I have several recording apps the the level is too hot.  I have looked in the system settings and there is nothing there that I could see.  On my Mac I can adust imput levles from the audio part of System Preferences.  Is there anything like that on the iPad?

    No, but there's and App for That.  Try Garage Bank for iPad in the App Store.

  • How do I set and change my snooze time on my alarm clock?

    Help me figure this out please.

    You're not addressing Apple here. If you want them to know your thoughts on the matter, use the Feedback page:
    http://www.apple.com/feedback
    Best of luck.

  • Using the Motorola Atrix w/ the laptop dock, when I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up so pages open the right size?

    I'm using the Motorola Atrix smart phone with the Laptop Dock. When I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up the Firefox browser to open the web pages the right size in the first place?

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • Is there any way to set the SCCM system to use local time instead of UTC?

    We have ConfigMgr 2012 in our environment. We are in EST.
    Is there any way to set the SCCM system to use local time instead of UTC?
    When we try to deploy packages, if you don’t specify the time, it reverts to UTC which for us is off by 5 hours.

    Which times are you talking about? Deployment start times or deadlines? Those could be set to UTC *or* client local time.
    Torsten Meringer | http://www.mssccmfaq.de

  • Is there any way to set default column widths in the Finder's Column view

    When my Finder windows open in column view, all the columns are always VERY wide. I have to then spend time resizing them to a managable width. Is there any way to set default column widths in the Finder's Column view?
    <Re-Titled By Host>

    No, because you can't set a columns view default.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Is there any way to set a password so that txt messages only open when the password is entered

    Is there any way to set a password so that txt messages only open when the password is entered?
    Please help! Thanks for reading:)

    Hello Damien,
    There is an option to set a passcode for the entire iPhone.  You can use the following steps to set this up:
    You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
    Once enabled, you will be prompted for the passcode whenever you:
    Turn on or restart the device
    Wake the device
    Unlock the screen
    Note: You can specify the amount of time the screen must be locked before requiring a passcode.
    You can find the full article here:
    iOS: Understanding passcodes
    http://support.apple.com/kb/ht4113
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Is any way to set up the store or computer to download only the cc version not the HD when you buy a movie?

    Is any way to set up the store or computer to download only the cc version not the HD when you buy a movie?

    every time that I download a movie in I tunes it downloaded the two version CC and HD, so it takes a long time for the HD. how can I stop or only download the CC version?

  • Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

    Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
    Thanks!

    goldberry wrote:
    Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
    I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

  • My itunes account was disabled for some reason.  I changed password in iforgot and still didn't work.  I could log in but not make purchases from the store so I set up a new login/account .  Is there any way to move my music to the new account?

    My itunes account was disabled for some reason.  I changed password in iforgot and still didn't work.  I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2.  Is there any way to move my music to the new account?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Any way to play two clips at the same time one over the other? (transprent)

    Any way to play two clips at the same time one over the other? (transprent)

    Yes.
    See the information here for a variety of ways to do this:
    http://discussions.apple.com/thread.jspa?threadID=933500&tstart=50
    http://discussions.apple.com/thread.jspa?threadID=903151&tstart=0
    http://karsten.schluter.googlepages.com/jackiechancredit
    http://www.geethree.com/slick/V_04.html

Maybe you are looking for

  • Lync Reverse Proxy Alternatives

    When migrating from OCS 2007 to Lync 2010, we balked Microsoft’s recommendation to deploy Forefront Threat Management Gateway (or ISA) just to get the reverse proxy services.  TMG is way too expensive and complex for such a limited, simple use case.

  • Website is down and I can´t log into Business Catalysator

    I´m trying to get in touch with technical support for Business Catalysator, but I can´t get in touch, they just sent me the link to this forum. My collegue in charge is not availible today, and I really need some instant help. The page is down with t

  • How to use Remote listeners

    I've been using RMI a lot recently and have found a pretty slick way to deal with listeners via Remote calls and I figured I would share this information with everyone as it might help someone or someone may have a better idea how to do this. Anyway,

  • SQL Server Max Memory Settings

    Hi, I'd like to check if SQL Server will consume memory more than the configured MAX Memory settings? And if so when does SQL consume that and how much would it consume. Regards, Jay

  • OI includes and libraries

    Hi All, I am using OI libraries for one of my GUI application. I have lost the header files and libraries due to hard disk crash. Can anyone provide/suggest as to where I can get these header files and libraries. Below I have put a breif description