Any way to stop rotating the surround sou

hey all
im looking to buy one of those 3d head mounted displays with head tracking.
so if you turn around physically, you turn around in the game.
the problem is if you have physically turned 80 degrees, you are now facing the opposite direction to your 5. surround sound speaker setup.
is there any way of setting the audgy 2 zs so that it outputs surround sound BUT does not rotate to compensate for you turning in the game?
so wat i mean is...
in a game, u hear a sound behing you... so u turn to face it (but since you're using the head mounted display with head tracking, you have also physically turned round and are now facing the back speakers)
currently, the soundcard would assume you're sitting at ur desk and send the sound to the front speakers.
is there any way to prevent that?
cheers all!

The move of sound source is directly depending on the way the application you use is implemented. So it must be the application to have specific implementation to no rotating sound sources while you're moving your head.

Similar Messages

Is there any way I can rotate pdf's in Adobe Reader?

I want to use Adobe Reader to view drawings when out on site, but they often open in portrait when they should be landscape. Is there any way I can rotate the view?

Adobe Reader does not have a built in way to rotate the view, but iOS allows you to set the slider next to the volume control on your iPad to lock rotation of the device. You could set that to control rotation, and when you open a document whose pages are rotated, you could lock the device rotation, then rotate the deivce to view the page.
Dennis Griffin
Adobe

Is there any way of stopping ios7 from downloading after it starts? If not, is there a way to go back to the previous system?

Is there any way of stopping ios7 from downloading once it has started? If not, is there any way to go back to the previous program instead of ios7?

turn off wifi

When I watch slide show through my Apple TV version 6..2 the air play instruction box appears always on the screen and hides the photo. Is there any way to stop it.

When I watch slide show through my Apple TV version 6..2 the air play instruction box appears always on the screen and hides the photo. Is there any way to stop it.

Hi Sujatha vijay,
It sounds as if your Apple TV is in Conference Room Display mode. You will need to turn this off. See this article -
Apple TV (2nd and 3rd generation): Understanding AirPlay settings
http://support.apple.com/kb/HT5517
Thanks for using Apple Support Communities.
Best,
Brett L

Last time I synced with iTunes all apps (except the originals) and all the work I'd put in them got erased. Any way to stop that?

Last time I synced with iTunes all apps (except the originals) and all the work I'd put in them got erased. Any way to stop that?

Your apps didn't get erased. They're still there in your iTunes Library, you just didn't tell iTunes to sync all Apps when you synced. You have to either choose the specific apps you want to sync or say sync all apps.

Is there any way to stop my iPhone use data when i hit the data limit so i don't go over the data limit

is their any way to stop an iphone 4s from using data when i hit the 2gb limit on verizon wireless this way i dont have to pay the fee for extra data
thank you

Don't know of any way for it to happen automatically, but you can still use the phone and send/receive sms with cellular data turned off.

Is there any way to stop the delay between different sets of speakers when using airport express?

Is there any way to stop the delay between different sets of speakers when using airport express?

Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

Usual cause: printing at the wrong aspect ratio for the image - trying to print 5 x 3 in the shape of a 6 x 4 for instance.
Regards
TD

Any way to stop auto shared volumes from opening in finder when booting?

Leopard 10.5.8, but has been happening since at least 10.4.x...I have auto mounts setup in my user preferences, the auto mount fine, but the automatically open up too...makes it very annoying having to close all windows every time I boot the system...we have multiple Mac Pros running both Leopard and Snow Leopard...is there any way to stop the opening of the shares when I boot? maybe an applescript or something? thanks.

there are some fancy solutions to this using autofs or /etc/fstab but a less involved method might be by using applescript. open Applescript editor (it's in /Applications/Utilities) and paste the following in it
mount volume "afp://nas.ip.address/path-to-share"
add a line like that for each share you are mounting.
save the script as an application and add it to your login items. on the first try it will ask you to enter user name and password if your shares have any. enter those and check the box to save it in the keychain. it won't ask again. this will mount those shares without opening separate finder windows.

Any way to stop Pages (current) from creating Table of Contents when converting to ePub. My PDF conversion is perfect Thanks

Any way to stop Pages (current) from creating Table of Contents (in this case Chapter 1) when
coverting from Pages to ePub. This messes up my book. The PDF file created is perfect!
Thanks for any help. Jim

You might want to search/ask in the forum for Pages too
https://discussions.apple.com/community/iwork/pages

Is there any way to stop a process execution (all instances)

Hello,
I´d like to know if there is any way to stop a specific process for execution at the engine without need to undeploy it, since we don´t want to loose process instances when we need to start this process for execution latter on.
We have a PRD environment with a lot of processes from different departments (developed by different teams and external suppliers) and a feature for stop a specific process and isolate the environment could be very good to do root cause analysis when issues occurs at the environment.
Sometimes stop a specific process (or some of them) could help in issues investigation that causes the engine to malfunction (lot of audit enabled, some loop bad controlled, lot of concurrent access) but I could not see this option at the webconsole.
In the version 5.7 one EAR was created separatedly for each process deployed and this could be done stopping the EAR created for that process. Anyone know how to do this at version 6?
Thanks

Well the bad news is you are right, there really isn't any way to do this in versions after 5.7
Starting at 6.0 all projects are deployed under the 'engine ear'. So if you stop the engine, you stop all projects deployed.
I'm a little concerned that you are first seeing these issues in a 'PRD' environment, is this something that you could set up in a DEV, or UAT, or SIT, or any other environment (That is built similarly) to recreate the issues? - Then undeploy any of the other projects... and isolate the problem...
-Kevin

Is there any way to stop running apps from showing in dock

Is there any way to stop running applications from showing in the dock

MacUpdate.com for OnyX or TinkerTool, one of those has the ability to lock the Dock so no changes occur, basically giving you what you want.

Is there any way to stop an app from updating? I accidently hit update all, and have an app I don't want updated.

Is there any way to stop an app from updating? I accidently hit "update all" and have an app i don't want updated. Thanks

you can't reverse the process, once you accepted there is no other way, if you sync it to your itunes library in your computer it will automatically update the updated app as well.
What you can try though is delete the app from your iPad and try syncing it to your itunes library but if you set up iCloud it may update the app automatically

I have a 4g touch. I updated ibook in itunes and now, every time I sync, I get the message that the app won't run in os6. Is there any way I can revert the app in itunes so I have the latest version that will work with OS6?

I recently updated ibook in my Itunes. Now, every time I sync, I get the message that it won't update the ipod as ibook won't run in OS6. Is there any way I can revert the ibook app in itunes so it quits trying to install the current ibook app. I am trying to stop getting the warning message. I am also concerned if I ever have to reinstall the app.

Delete the app from the iTunes library on your computer and then transfer the version from iPod to computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

Is there any ways to stop Quicktime player from occupying audio hardware?

Hi, my PC system is Window XP Pro SP2, HP xw8400 Workstation w/ 2G Ram. And the PC has a Digidesign Pro Tools HD 1 audio system installed.
My problem is that after Quicktime player lauches, it will occupy the Pro Tools HD's hardware. And if I want to start Pro Tools software, "digidesign hardware is in use by another application." warning will occur and Pro Tools software will then quit. BTW, Digidesign's audio driver is not multi-clients compatible.
I have set Quicktime player's audio playback device to PC motherboard's audio device, and system's audio device is also motherboard's audio device, I even have checked the "use default device only" option. I can't understand why Quicktime player still occupies Digidesign's hardware, even it plays back audio through motherboard's audio device.
Though I can quite Quicktime player before lauching Pro Tools software, I still feel it's annoying and inconvenient, and want to know some ways to solve this problem.
Anyone can help? Thanks in advance. I have asked for help in Digidesign's offcial forum, no response.
BTW, the Quicktime player version on my system is 7.6.5, and each time Quicktime player launches, the sample rate led on the Digidesign's audio interface will flash, indicating that QT player is accessing Digidesign's hardware.
Message was edited by: compusic
Message was edited by: compusic

Victor.jacob wrote:
I have a Blue Ant Q2 Bluetooth headset. When it's paired, is there any way to stop all audio from streaming to it? I want to hear the iPad "ring" so I don't have to have the earpiece in my ear all day, or be able to play audio through the speakers instead of the earpiece. I feel like I'm missing something simple.
You are missing something simple but lets get it to stop as you want. Go to Settings/General/Bluetooth turn it off.

Any way to stop rotating the surround sou

Similar Messages

Maybe you are looking for