Any way to stretch the height of text?

Hi
Is there any way to stretch the height of text? I tried the distort tool, didn't seem to work.
best
elmer lang

elmerlang wrote:
…didn't seem to work. ..
"'Doesn't work' is no error description!" .... SCNR !!!
works like charm here:
Title selected
Distortion Tool selected
streeeeetched ...

Similar Messages

Is there any way to get the height/width of an image before importing it in the indesign document.

Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.

You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution.

Is there any way to prevent the copying of text from Presenter's Notes tab?

PowerPoint Notes Page text exposed on a Presenter Notes tab can be selected and copied from the Notes tab and then pasted into any text document. Is there any way to prevent the copying of text short of not providing notes text at all?

Hi Robingo,
Excel is strictly treated as a data source and Siena only imports the data in your tables, not the formatting.
If there is some business logic behind the formatting, you could mimic the same logic in Siena. For example, the font is bold or red if a value is in a certain range, the font is in italics if the data is for a specific customer, etc.
Thanks
Robin

Bcc: Is there any way to change the "undisclosed recipients" text ?

Bcc: Is there any way to change the "undisclosed recipients" text appearing on the message at destination when I used Bcc?...
Eudora offers the possibility to choose the text that appears when using Bcc.
Does Mail do the same?...
If yes, how?...
Thanks
sergio

Every message that I send with addresses ONLY in Bcc:, when is received by others, or when I receive it back from some yahoo group, has the reading: "undisclosed recipients"...which I can see either when I receive an answer from some individual or when I receive the messages from the group.
Of course, if I write any address in the "To:" space, what comes out is the address I type.
My question was something else: HOW to CHANGE what comes out.
In Eudora it is possible to have ANYTHING one wishes appearing INSTEAD of the "undisclosed recipients", it's enough to type a code inside the message once, and choose the text one wishes to appear.

Is there any way to set the height of choice list or list of values?

Hello Everyone,
(Jdeveloper: 11.1.2.1.0)
I recently created a page with some fields as choice lists and some as list of values. Somehow the choice list when opened it is not displaying data properly (I have 3 rows, it is showing only 2 rows and have to scroll to see third row) . I would like to see if there is any way to set this so that I can see all three rows or set the height of choice list as a fixed height?
Thanks,
Ravi Nuka.

Hi Manish,
sorry for the delay, here the code for the list binding from vo.xml
<ListBinding
    Name="LOV_SetOfBooks"
    ListVOName="NfSetOfBooksRVO1"
    ListRangeSize="-1"
    NullValueFlag="none"
    MRUCount="0"
    ComboRowCountHint="10">
    <AttrArray Name="AttrNames">
      <Item Value="SetOfBooks"/>
    </AttrArray>
    <AttrArray Name="ListAttrNames">
      <Item Value="SetOfBooksName"/>
    </AttrArray>
    <AttrArray Name="ListDisplayAttrNames">
      <Item Value="SetOfBooksName"/>
    </AttrArray>
    <DisplayCriteria/>
</ListBinding>
<ViewAttribute
    Name="SetOfBooks"
    PrecisionRule="true"
    EntityAttrName="SetOfBooks"
    EntityUsage="EdContractsEO"
    AliasName="SET_OF_BOOKS"
    LOVName="LOV_SetOfBooks">
    <Properties>
      <SchemaBasedProperties>
        <DISPLAYWIDTH
          Value="30"/>
        <CONTROLTYPE
          Value="combo_lov"/>
      </SchemaBasedProperties>
    </Properties>
</ViewAttribute>Thanks,
Ravi Nuka

Is there any way to change the default palette text in illustrator?

i was wondering if there is a way to change the text of file,edit,view etc.

No. You will see many posts about tinker tool ,but that wont change Adobe Apps fonts, only apple applications.

Is there any way to retain the formatting of text being imported from Excell as datasource?

My client has given me text formatted with italics, bold and colors. I have all the data for my app in an Excel spreadsheet. In Excel, the text formatting is preserved. However, when I import the data into my Siena app, all of the text formatting reverts
to whatever the format of the label control. Is there another type of control I can use to preserve the rich text formatting?

Hi Robingo,
Excel is strictly treated as a data source and Siena only imports the data in your tables, not the formatting.
If there is some business logic behind the formatting, you could mimic the same logic in Siena. For example, the font is bold or red if a value is in a certain range, the font is in italics if the data is for a specific customer, etc.
Thanks
Robin

A way to change the menu's texts ? And 10 band aud...

6110 Navigator.
Two questions:
Is a third party 10 band equaliser, or, beeter an app to read audio files i can install on it ?
I don't like the ergonomy of the original one.
The menus on my phone (French Language) are so badly translated than some menus means the opposite of what they are supposed to do (ex: "to active" instead of "activated"). And others are just nonsense. Is any way to edit the menu's texts ?
Even with a third party app ?
Thanks in advance.

LCG Jukebox from www.lonelycatgames.com

Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

Is there any way to change the default font for outgoing text-messages, in "Messages"?
I can change it for one conversation, but then it resets to the default, tiny font.
The preferences menu only lets me change the conversation font.
(OSX 10.10)

Hi,
As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
Changing the Font would involved editing the Balloon.transcript file.
10:34 pm Saturday; December 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there any way to change the font size of the text in the Finder Sidebar?

This may sound like a bit of a dorky question but here goes nothing...
I am rather near-sighted and in need of new glasses but I am stuck in a holding pattern until I can get a referral to see my eye doctor. Anyway... I have found myself using the Zoom features far more often and increasing the font size in the Finder for the Item Names & Info.
The problem that I am facing now, is that the font size of the text in the sidebar is FAR SMALLER than the font size of the text of the actual file names & info.
+*IS THERE ANY WAY TO INCREASE THE FONT SIZE OF THE TEXT IN THE SIDEBAR??*+
So far I have looked in:
*The Finder Preferences
*The Desktop Preference Pane
*The Appearance Preference Pane
*The Seeing Tab of the Universal Access Preference Pane
And to add to my frustration I have also searched the Mac OS X Help AND all of the posts in this thread (back to 1/1/09) that had the word "sidebar" mentioned in them!!
+*DOES ANYBODY HAVE ANY OTHER IDEAS?? OR IS THIS ONE AREA THAT I AM OUT OF LUCK BECAUSE APPLE DIDN'T FORESEE THIS ISSUE??*+
Usually, Apple is really very good about foreseeing any possible trouble (ESPECIALLY when it comes to the area of Accessibility for people w/ disabilities!!)
I do hope that SOMEBODY can help me on this one!!
Also, I noticed that the size of the text that is on the Toolbar is also the same ITSY BITSY font size as the text on the sidebar, but I am guessing that there is next to nothing that can be done about that!!
Thanks a Million!!
+~Kathryn A.+
P.S. Here is the link to a screenshot that I took that will illustrate my problem more clearly...
Icon View Screenshot: http://screencast.com/t/gzDONwN3

Hi! The only way I know of is changing the screen resolution. Tom

Is there any way to keep the flash from going off when you receive a text or other notification?

I have an iphone 4s. Is there any way to keep the flash from going off when you receive a text or other notification? I keep it next to my bed at night and keep thinking there is lightning when something comes thru. LOL

Go to Settings>General>Accessibility and turn LED Flas for Alerts to Off.

I hate white text on black background - is there any way to change the look of pse9?

I hate white text on black background - is there any way to change the look of pse9?

I agree and very disappointed with the look of this Photoshop elements 9 screen

Is there any way to convert the selected rows to text in javascript??

Hi All,
I have place some word file to indesign cs 5.5 it is almost in one table, i need to separate the text from the real tables, Is there any way to convert the selected rows to text in javascript??
If there is no way to make that, any one can help me to make a script to cut the selected rows and place it in privies pointer of the table to make it independent table and after that convert it to text ?

This insert the rows contents after the table instead of being before:
for (var r = app.selection.length - 1; r >= 0; r--) {
    for (var t = app.selection[r].rows.length - 1; t >= 0; t--) {
        for (var u = app.selection[r].rows[t].cells.length - 1; u >= 0; u--) {
            for (var c = app.selection[r].rows[t].cells[u].paragraphs.length - 1; c >= 0; c--) {
                app.selection[r].rows[t].cells[u].paragraphs[0].move (LocationOptions.AFTER, app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset));
                if (c != 0)
                    app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\r";
            if (u != 0) {
                app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\t";
            else {
                app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\r";
for (var r = 0; r < app.selection.length; r++) {
    for (var t = app.selection[r].rows.length - 1; t >= 0; t--) {
        app.selection[r].rows[t].remove ();

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Any way to get the old behavior of "Hyperdraw Other"

In Logic 4.7 one could type ^Command-O to bring up a dialog, then simply type in a controller number and RETURN. That's all you needed to do to hyperdraw any arbitrary controller.
In Logic 7 you type ^Command-O which brings up a long list. No text entry box. You are then forced to use your mouse to scroll waaaay down the list to the controller you want. To add insult to injury you are then forced to use the mouse again to click on the close box to close the window. Yes, this is one of those nifty new-fangled windows without a "CLOSE WINDOW" key command.
Is there any way to replicate the old behavior of Hyperdraw >Other?
I don't want to rant but it seems to me that the speedy interface of logic 4.7 has given way to uber-bloat in logic 7. I hope this isn't the general direction things are going.

Hi K,
⌘ W
Yes, it does close the floating window on my system.
Coming fresh off the transition from 4.7 the distinction is vivid. You may not remember
Probably not, since I made every upgrade along the way, though skipped a lot of V5's primetime.
In my opinion once you start adding up a bunch of "nowhere near as terrible"s and your forced to do them again and again day after day they add up to one big terrible.
Agreed - but some adaption is of course to be expected (at least, IMO). Some is for the better, some is for the worse. Overall, I find the workflow faster with 7 than 4 but again, my memory is not as vivid as yours.
Cheers,
J

Any way to stretch the height of text?

Similar Messages

Maybe you are looking for