Any Way to Un-Expand Appearance?

I expanded the appearance of a brush path intending for it to only be temporary, but accidentally saved it that way. When I reopened the file, obviously I couldn't undo "expand appearance." Is there any way to un-expand it and make it a path again?

tieba,
Unfortunately not.
Unless you can fall back on an earlier version, I am afraid you will have to recreate the original path. If you are lucky with a symmetric brush, you may be able to cut the object at the ends and create a 1 step blend between the bounding paths and expand the blend thus getting access to the central and hopefully original path, and then you may reapply the brush.

Similar Messages

Hello, i am wondering if there is any way i can expand my ipad memory y using an SD card,

Hello, i am wondering if there is any way i can expand my ipad memory by using an SD card, i would like to put some pics but mainly music onto it to free up alot of my memory space and even APPS if that is possible, i am aware u can use Camera Connection kits, to that my question would be can i also store music on there, i also am away u can get an external wifi hard drive but id like to steer away from that as it is a shared WIFI unit and im sure id upset alot of people if i was to take that option

dirtee_deedz wrote:
Last of my questions, will any wireless flash drive be compatible with my ipad or no??
That's a broad question - it's possible that other wireless flash drives may work, but it is doubtful that all of them will. I am mostly familiar with AirStash, and it has been around for a long time. There are also portable wireless hard disk drives such as the Seagate Wireless Plus or SSDs such as the Kingston Wi-Drive. You have plenty of options to consider.

Hello all, I'm dubbing my italian website in english. The "reproduce presentation" item in the photo album pages appears only in italian, because I have an italian 2008 version of the application. Is there any way to make it appear in english?

Hello all, I'm dubbing my italian iweb site in english. The "reproduce presentation" item in the photo album pages appears only in italian, because I have an italian 2008 version of the application. Is there any way to make it appear in english?
Thanks for your attention and appreciated answers

iWeb has no Italian version.
The language setting on your computer determines the language that is used.
Change the language settings on your computer or use this :
http://www.tj-hd.co.uk/en-gb/languageswitcher/

Is there a way to script "expand appearance"?

I have created a method to create line art roof shingles row-by-row. I think something like this is a good candidate for scripting, but I run into a dead-end quickly when trying to script this. Basically, I use "expand appearance" multiple times during the course of this process and I can't find any way to script that action. I have heard about using MenuIDs, but I can't find anything on how to discover what the MenuID for "expand appearance" is.
Anyhow, here is the tutorial. If anyone can give me some pointers on how to script this process, I would be very thankful.
I have also tried recording an action, but "expand appearance" doesn't get saved.

I used the recorder to record an action. The Expand Appearance step didn't record. I just now noticed you can add menu items to actions from the drop-down menu. Trying that. The next step is to add the tweak and roughen steps to the action.
I'm using Windows BTW and was going to script in javascript.

The default daily calendar settings in iCal is half hourly; is there any way to have this appear as 10 minutes instead?

iCal appears as half hourly setting in the daily view. Can I change this to 10 minute intervals, so I can book 6 appointment in 1 hour if I so wished?

iCal appears as half hourly setting in the daily view. Can I change this to 10 minute intervals, so I can book 6 appointment in 1 hour if I so wished?

Any way to customize LR appearance?

I don't see anywhere in the LR preferences where the user can customize the color scheme and/or font size. I am particularly interested in making the data on the thumbnails larger and darker. These old eyes have trouble with small fonts (yes, even w/ the glasses on).
Doesn't hurt to ask :-)
Thanks,
Pamela
Hoof Pix Sport Horse Photography

Pamela,
Mainly, you can't do (currently) what you're asking for. The font size on the grid thumbnails is slightly dependent on the thumbnail size set on the tool bar, but the gray text on some of the data can't be changed. I have the same problem, and I'd love to have all the various fonts and colours settable in the preferences. For a 1.0 release, an astonishing amount of functionality is in LR, but to make it a really _nice_, well-behaved program, the developers still have a lot of work to do. :)
Cheers,
Hal

Is there any way to join paths after expanding appearances?

I'm drawing very simple forms to send to a laser cutter and I need them to be symmetrical. I'm using the "transform" tool to mirror my drawing, then expanding the appearance at the end. But once I have 2 full paths, I can't get illustrator to join them. I've grouped them, ungrouped them, made a copy of the drawing, tried everything I can think of. I swear it actually used to do this so maybe my software is corrupted (I'm using CS4- yes, the dark ages!) so if I need to just move forward that's cool- but if there's an easy way to get this to work I might just stick with the old stuff since this is really all I use it for, and very infrequently. Thanks for any thoughts!

Jacob,
Thanks for the response! It's possible I'm misunderstanding the expand feature, but it seems that until I expand appearances and turn the "mirrored" path into a "real" path, there is no second half to join to, so I couldn't do it beforehand. I tried the suggestions that you and Monika made about trying the Unite/merge etc. in the pathfinder panel, but they didn't work. What's confusing me is that if I simply draw two scribbles with the pencil tool, it's two clicks to join the ends of those paths to make an enclosed form. I can't understand what it is about the lines made by expanding appearances that marks them as somehow different from plain old lines. They look the same, behave the same in all other ways but the software balks when I try to join the endpoints. I even tried clipping a little bit of the ends of the two paths I want to join, just to see if it would "reset" something about the lines, but that didn't work either. I'm attaching an image of one of the forms- neither the top points or the bottom ones are joined. Hope that clarifies what I'm trying to do- I drew the left half with the "copy" reflecting using the transform feature, then when i liked the way the whole thing looked I hit "expand appearances" to end up with two usable halves. I'm not at all attached to that method of getting the two halves; in fact it does work to turn the "transform" effect back off and simply use the reflect tool, but that's more cumbersome and it seems silly that just joining the endpoints can't work. Any other thoughts would be so appreciated!

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

Is there any way to expand both the OSX and Bootcamp partitions after imaging the drive to a larger HDD?

Hey all. I have been searching forums and racking my brain to find a way to fix an issue I am having with my Late 2011 13" MBP. SInce I wasn't able to find an answer, I figured it was time for reach out to the community.
I purchased a Late 2011 13" Core i5 MBP that had a bad HDD from a friend. I replaced the HDD with an old 100GB SATA drive I had lying around. My mistake was thinking that it was a 1TB drive. Regardless, I was able to reinstall Lion to the new HDD and get the machine up and running. Once that was working, I went ahead and upgraded to Mountain Lion with no issues, then I unstalled Boot Camp and Windows 8. Everything installed without a hitch and was working great. Right about that time I realized that I had almost no free hard drive space and discovered my error (the 100GB HDD).
I pulled the HDD and put in in my ASUS G74SX laptop along with a Seagate 750GB Hybrid Drive and used Clonezilla to do a hardware-to-hardware clone of the drive. When it was completed, I put the 750GB Hybrid drive in the MBP and it booted right up with no problems. I was also able to switch back and forth from my Boot Camp drive and everything appears to be working as it should.
The only problem I have is that both the OSX partition and the Boot Camp partition are still the same size as they were before I cloned the drive. Try as I might, I can't find any way to expand either one to use the additional 650GB of space that is sitting on the drive unused. Disk Utility won't allow me to expand the partitions unless the free space is contiguous with the drives.
Does anyone know of a utility that I can use to fix my problem? I really don't want to reload everything from scratch.
Thanks,
Scott

You need to combine the libraries on one computer. Otherwise you'll be constantly erasing your iTunes content as you switch computers. iPhone will only sync or manually manage iTunes content with ONE computer at a time.

How do I change the way the title/author appear and is there any way to remove pages on EPUBs?

Hi all--
I am having a really hard time--I am trying to transfer EPUBs from my Win 7 comp to my Nook Tablet. I bought a lot of books from several non-BN sites because they were lots cheaper and were also sold in bundles--but the site was messed up and sent the books in PDF form rather than EPUB. PDF files won't read like a regular book on my Nook Tablet, so my friend offered to convert them to EPUB for me.
Most of the books turned out fine, but some of them now have a few extra pages at the beginning before the cover image and the correct title and author are not displaying--it seems to instead show the filepath where the file was saved on m friend's computer (C:\My Computer/Documents and Settings...etc.)
So, what I would like to do is be able to edit the EPUB files so I can delete the extra pages at the beginning so the correct cover image will be displayed and to be able to change the file's data sp it will show (and be searchable by) the correct title and author.
I am new to all this, so I appreciate any help you can offer. Thank you SO much for your help!!
--Jamie
P.S. Having the title and author show up correctly so they are searchable and appear in the correct place on my Nook Tablet is the top priority--correct cover pages would be nice aesthitically, but it is not that important.
****ALSO--does anyone know of an app or anything for the Nook Tablet that would allow PDF files to be read just like an EPUB/B&N=purchased book? Currently when I open a PDF, it shows the page in TINY print--you can use pinching to zoom in, but then the file enlarges so it is bigger than the screen, making it very hard to read. I can't figure out any way to enlarge the text but still fits the page like an EPUB does, so I'm wondering if there's an app that would do that--it's hard because you can't try apps before you buy them and I can't teel if they will work from the descriptions.

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

I recently updated to 10.8.2 and now my notes from my iPhone no longer appear in my mail nor do my calendar appointments. Is there any way to change it so they will appear?

I recently updated to 10.8.2 and now my notes from my iphone no longer appear in my mail nor do my calender appointments. Is there any way to change it so they will appear?

If it has the same (bad) behavior on two different systems then there is a very good chance that the drive is toast.
BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
regards

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Both myself and my wife have 2 separate iTunes accounts, I subscribe to iTunes Match. Music purchased on my wife's account appear on our computers iTunes library but my iPad cannot access the music she has purchased. Is there any way to overcome this

Both myself and my wife have 2 separate iTunes accounts, I subscribe to iTunes Match. Music purchased on my wife's account appear on our computer iTunes library but my iPad cannot access the music she has purchased. Is there any way to overcome this

The only way to do what you want is to log into your wife's iTunes Store account on your iPad. Doing this will lock you out of your account for 90 days.

I deleted emails from VIPs and didn't realise they would be deleted from my Mailbox. VIPs does't appear in Mail on Time Machine. Is there any way I can restore the deleted emails?

I deleted emails from VIPs in Apple Mail and didn't realise they would be deleted from my Mailbox. I have tried to restore from Time Machine but VIPs doesn't appear. Is there any way I can retrieve the deleted emails? I also have bachups on an external hard drive.
I have OS X 10.9.2

You can't download pictures from iCloud by logging into icloud.com. If you deleted pictures from camera roll AND photo stream, the only possibility is preforming a restore from an iCloud backup, assuming the backup has the pictures in it. (Many users have been unable to restore and get back their pictures.)
If the restore doesn't have all the pictures, then they are gone.
In the future, use photo stream to sync photos from an iPhone to a computer, then copy the photos on the computer from the photo stream album into a permanent album. Photo stream pics stay there only for 30 days, and only up to 1000 photos are stored. Don't use photo stream as a storage medium, it's only for copying photos from one device to another. Always copy (either via USB cable or photo stream) to a computer and then move to an album.

I´m a frequent user of personalized tags on my contacts. When I update to iOS7.0.2, my tags don't appear on alphabetical order as they were on the other system. I already made a restoration of the system and it didn't work. Is there any way to fix them?

I´m a frequent user of personalized tags on my contacts. When I update to iOS7.0.2, my tags don’t appear on alphabetical order as they were on the other system. I already made a restoration of the system and it didn’t work. Is there any way to fix them?

I´m taking about the "CUSTOM LABELS"

Any Way to Un-Expand Appearance?

Similar Messages

Maybe you are looking for