Any way to undo archive log application?

While cloning the target from the source, we were supposed to restore till log sequence x and we restored it till x+1. Is there any way to undo an archive log application till sequence x. Our database version is 10.2.0.2

1) However, Is it possible to flashback the database to a point before the resetlogs in 10g?
If you meant that after doing flashback databse and resetlogs, can you do it for the point past the resetlogs than yes you can.See this.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9011.htm#SQLRF01801
2) Do we have any other options apart from flash back since it is disabled.
Not that which I can think of.If you don't have flashback database,the other option will be to manualy undo the changes.
Aman....

Similar Messages

Is there a way to apply archive logs, standby DB is opened with 'resetlogs'

Hi All,
I have setup a standby database (Oracle 10g SE). I applied hot backup and archive logs to the standby database till yesterday. I have opened the standby database using 'alter database open resetlogs;" and validated the application functionality using the standby database.
Now I want to regularly apply logs from the Primary database to the standby database, but today I have opened the standby database using 'alter database open resetlogs;"
Need assistance to know the way to apply archive logs, once the standby database is opened with 'resetlogs' option to keep it in sync with the Primary database.
Thanks
Kunal

Welcome to OTN,
I have setup a standby database (Oracle 10g SE). I applied hot backup and archive logs to the standby database till yesterday. I have opened the standby database using 'alter database open resetlogs;" and validated the application functionality using the standby database.Standby opened with *resetlogs* ? What you did? have you performed failover of standby database?
Now I want to regularly apply logs from the Primary database to the standby database, but today I have opened the standby database using 'alter database open resetlogs;"
Need assistance to know the way to apply archive logs, once the standby database is opened with 'resetlogs' option to keep it in sync with the Primary database.Have you enabled Flashback & created Restore point? If so you can do it.. If not rebuild standby again.
Check this scenario How To Open Physical Standby For Read Write Testing and Flashback [ID 805438.1]

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
Thanks!

goldberry wrote:
Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

The Game Center app is pre installed and cannot be removed from the device.
Best thing to do is move it to the last available screen.
Hold down the Game Center app until all the apps jiggle then sliide the Game Center app to the right from one screen to the next. This requires a bit of finesse, but it's doable.
Press the Home button one time to stop the apps from jiggling.
For the Apple ID issue, try resetting.
Tap Settings > General > Reset > Reset All Settings
Then try your Apple ID and password for the Game Center app.

I just restored my iphone4 in iTunes ( after not syncing it for about three months) and it wiped all my texts and contacts and I think restored it to three months ago. Any way of undoing this? Thanks!! this?

I just restored my iphone4 in iTunes ( after not syncing it for about three months) and it wiped all my texts and contacts and I think restored it to three months ago. It seems it erased all texts and recent contacts since three months. Any way of undoing this? thanks in advance, Greg

Only if you have a more recent backup with which to restore from - if you've only got the one from 3 months ago then you will be limited to what was on that.

Is there any way to download the Adobe Application Manager for Mac 10.5.8?

I just subscribed to the monthly inDesign plan and was unaware I had to upgrade my system. Is there any way to download the Adobe Application Manager for Mac 10.5.8?

LisaK78 wrote:
I am trying to upgrade to Snow Leopard but I cannot figure out how to do it online. Do I actually need to purchase the disc and install it that way? Is there no way to download the update?
See:
Software update, upgrade--what's the difference?
http://support.apple.com/kb/HT1444

HT201342 Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Thx Winston,
I can count the send item. But let me try to explain why did I ask this question.
I had a trouble in sending e-mails from icloud on 22/2 and when I saw in my send item there were no emails.
But the mesgs to whom I emailed received and out of which only few of them didn't got the email. So I wanted to know the log abt the outflow of the mesg with subject and the receipants email id and the list with attachment or not.
How and where will I get the information apart from send item and draft mesg and the outflow undelivered?
Regards
Sarfaraz

Is there any way to lock my messages application with a password or something?

is there any way to lock my messages application with a password or something?

http://www.apple.com/feedback/iphone.html

Is there any way to undo Time Machine formatting?

Within 20 minutes of becoming a proud iMac owner for the first time I think I have made a serious mistake
I have two external hard drives, a 1TB Seagate that I wanted to use as my Time Machine back-up drive, and a 500MB WD drive that I had various files on that i wanted to copy to my iMac.
I had both drives connected through USB and when I went through set-up I selected the Time Machine option for the Seagate drive. I certainly don't recall my WD drive being mentioned at any point in the process, however when I look at the WD drive it now shows as 'Time Machine Backups', as does my Seagate drive, so it appears both drives were re-formatted.
Is there any way to undo this or will I need to look at data recovery software?

It sounds like you got this prompt:
And clicked Use as Backup Disk. Then got this:

Any way to undo an accidental "clear all"?

is there any way to undo an accidental "clear all" in my messages or recover them???

If the messages were backed up restore them from iTunes.
Allan

Best way of deleting archive logs on standby when backup taken on primary

Hello,
I have a 11gr2 dataguard configuration without the broker.
main problem in my particular situation arises from my FRA size on primary much more than on standby (90Gb vs 30Gb) and in some situations I'm constrained with FRA space on standby.... I'm going to align the FRAs but in the mean time....
can anyone confirm that if I have configuration as in subject with maximum performance mode and I'm not using the broker I should consider a sort of "external" way for archive log deletion on the physical standby?
In fact I'm setting on primary
- retention policy = redundancy 1
- archivelog deletion = applied on standby (without using any "backed up...." option)
Considering the standby it seems from docs that:
- retention policy always wins over deletion policy (so no archive eligible for deletion is deleted if retention is not satisfied)
- I can set on standby archivelog deletion = applied on standby (without using any "backed up...." option)
But it is not clear to me the effect of this config in case this is a standby itself and without any other cascade standby databases
The manual says this has to be met:
1) The archived redo log files have been applied to the required standby databases.
---> what does this mean in case the db is a standby.. met or not met as I have no other cascade standby dependant on this one?
2) The logs are not needed by the BACKED UP ... TIMES TO DEVICE TYPE deletion policy. If the BACKED UP policy is not set, then this condition is always met.
---> I should be ok
So the last question for standby is
- what to set retention policy to?
I have not understood if I set it to "NONE", this means no retention at all or retention for ever....
sometimes I read that there is no policy; in other examples that files will be retained forever (because no file considered as obsolete).... or at least so I understood...
I would like to have a sort of policy on standby where the archive logs can be deleted as soon as they are applied during the continuous media recovery phase...
It seems I can't find a self contained set of configurations across the dataguard....
Thanks in advance.
Gianluca

I agree with you.... It is a temporary contingency....
I already stressed the fact that sizes between sites must be quite identical...
we are going towards a production dataguard, migrating from a windows config (without it) to a Linux based config....
but this contingency made me think about these considerations regarding policies and automatic dataguard operations
I also stressed on equal size grow capability for both sites file systems, also for data tablespaces, so that for example in case of high fragmentation we have to avoid a limit situation where
1) a file system full for DR datafiles causes abend of automatic media recovery
2) this generates FRA growth in DR because archive logs are shipped but not applied any more
3) FRA goes 100% in DR and primary cannot ship any more
4) archive logs cannot be automatically deleted on primary because not already shipped
5) FRA full on primary and DB hangs....
Thanks anyway for input

Archived log application to a cold backup fails with ora-00328

I am testing backup and recovery scenario as mentioned in Metalink Doc id:69468.1 where a cold backup of one production server is restored on a separate machine. Some activity, say a table creation in some schema and insertion of rows in it is followed by a few log switches. Next I moved just the archived logs ( newly generated) to the test machine and proceed as follow to recover but log application is failing as below,any help would be appreciated!
SQL> startup mount;
ORACLE instance started.
Total System Global Area 205520896 bytes
Fixed Size 1248116 bytes
Variable Size 71304332 bytes
Database Buffers 130023424 bytes
Redo Buffers 2945024 bytes
Database mounted.
SQL> recover database until cancel using backup controlfile;
ORA-00279: change 581754 generated at 12/21/2007 02:35:04 needed for thread 1
ORA-00289: suggestion :
C:\ORACLE\PRODUCT\10.2.0\ARCHIVE\ARC00001_0641874107.001
ORA-00280: change 581754 for thread 1 is in sequence #1
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00328: archived log ends at change 581535, need later change 581754
ORA-00334: archived log:
'C:\ORACLE\PRODUCT\10.2.0\ARCHIVE\ARC00001_0641874107.001'
SQL> recover database until cancel;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database until cancel using backup controlfile;
ORA-00279: change 581754 generated at 12/21/2007 02:35:04 needed for thread 1
ORA-00289: suggestion :
C:\ORACLE\PRODUCT\10.2.0\ARCHIVE\ARC00001_0641874107.001
ORA-00280: change 581754 for thread 1 is in sequence #1
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
C:\oracle\product\10.2.0\archive\ARC00001_0641874107.001
ORA-00328: archived log ends at change 581535, need later change 581754
ORA-00334: archived log:
'C:\ORACLE\PRODUCT\10.2.0\ARCHIVE\ARC00001_0641874107.001'
SQL> recover database using backup controlfile;
ORA-00279: change 581754 generated at 12/21/2007 02:35:04 needed for thread 1
ORA-00289: suggestion :
C:\ORACLE\PRODUCT\10.2.0\ARCHIVE\ARC00001_0641874107.001
ORA-00280: change 581754 for thread 1 is in sequence #1
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
C:\oracle\product\10.2.0\archive\ARC00001_0641874107.001
ORA-00328: archived log ends at change 581541, need later change 581754
ORA-00334: archived log:
'C:\ORACLE\PRODUCT\10.2.0\ARCHIVE\ARC00001_0641874107.001'
Please Help

The error displayed stated you are required to have an specific sequence:
ORA-00280: change 581754 for thread 1 is in sequence #1
Check the contents of the v$recover_file dynamic view and verify if you really have all required archivelog files.
~ Madrid

Is there any way of grouping calls logs from same person/number/contact in call record on iPhone5?

I've just moved from BBry to iPhone5, and must admit that I am pretty dissapointed with the device.
I cannot find the way to group call logs from the same person/nmber/contact in call records, so I ended up with having multiple records (sometimes 7-10) for calls to and from the same number. Any solution for this?
Also, I cannot find the way to insert multiple attachements to my e-mails. How to do it?
Another issue I have is that I am not able to use most of the apps via WiFi, won't load pages, refresh, etc. When switched to cellular network, works fine. How to solve it?
All in all, device that costs $800 should have at least those basic functions, rahter than just being pure teenagers' show off phone! Business phone - no way!

Anupam,
If you are using 11.5 just keep in mind that the JCO connection points to a single application server (based upon the SAP Server alias connection settings), but the traffic itself to make a BAPI request is effectively the same as any client user traffic. There will obviously be limitations on performance and throughput, with network and server constraints added to the number and size of the R/3 requests, but there is no magic formula to plug-in because of all of these variables.
If you are using 12.0 (or plan to migrate when it goes GA) then taking advantage of the JRA (java resource adapter) and the associated application server pooling that it offers on the NetWeaver side of things will greatly help you in the throughput capacity.
If you have put some of your xMII application into either test or productive use and are running into issues then I would highly recommend entering the specifics into the customer / partner support portal so that they can help you through any associated problems.
Regards,
Jeremy Good

IS there a way to view archive logs

Hi, is there a way to view the content of the archive logs which have the extension "arc".

Hi,
This link is useful for you:
http://www.oracle.com/technology/deploy/availability/htdocs/LogMinerOverview.htm
Cheers

Is there any way to forward/archive/access regular text messages if you have to erase your phone and re-set it as a new phone?

I have some major errors in my operating system and was told that I have to erase my phone and then set it up as a new phone. I have a lot of messages I'd like to be able to keep and have access to after the reset. Is there any way to copy/sore/archive them?

if you have a mac and have it set that way, they are archived on the mac.

Any way to undo archive log application?

Similar Messages

Maybe you are looking for