Any way to update all the articles at the same time?
Any way to update all the articles at the same time?
is one by one the only way to update?
I have 68 articles up to 800 mb !!!
Unfortunately, the team hasn't added an Update All feature. I believe this is planned for the February release.
If you have your folders and files set up properly with a sidecar.xml file, consider deleting and re-creating the folio.
Similar Messages
-
My itouch screen froze showing "plug to itunes" after trying to update to iOS6. It still can be turned on and off. But the screen froze showing that message. I perhaps need to restore it. But is there any ways to export all the pictures from it before restoring?
Only if y can get the iPod out of recovery mode with the program. Otherwise you will have to restore via iTunes which erases the iPod.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version. Without losing all my bookmarks and saved pass words?
Hello johngervais, the latest firefox version is 26.0 (today 4 Jan 2014).
note that [https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp Firefox no longer works with some versions of Windows XP], if you have '''xp with sp2 and above''' you can update to latest version, see : [http://www.mozilla.org/en-US/firefox/26.0/system-requirements/ Firefox 26 System Requirements]
if you are able to update to latest version then see : [https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36 Common questions after upgrading from Firefox 3.6]
see also : [https://support.mozilla.org/en-US/kb/firefox-just-updated-why-it-asking-me-update-again Firefox just updated - why is it asking me to update again?]
Don't worry you won't losing bookmarks and passwords after update firefox.
thank you -
Is there any way to edit all the transitions in a project at the same time?
I chose "insert with transition" when adding clips to my timeline, but the default is set for one second, which is longer than I'd like. I know how to change the duration of each transition one at a time, but is there any way to select all the transitions (there's about 90 of them) and adjust the duration for all of them at the same time?
That's my main question, but I also would like to change the default cross-dissolve transition to be 15 frames instead of 30 for future projects. Anybody know if I can do that? I know I can create a 15 frame cross-dissolve and make it a "favorite", but it seems it would just be easier to change the default one instead.
Thanks,
StephanieI know I can create a 15 frame cross-dissolve and make it a "favorite", but it >seems it would just be easier to change the default one instead.
That's your only choice using FCE.
Al -
Is there any way to put all the music FROM my iPod back onto my computer? My school tech person not only wiped out my iTunes, the wiped out my back-up hard drive.
Hello cgbuehling
You can, but only the purchases that were made from the iTunes Store. Other content that was imported from a CD or other sources will not transfer over.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Regards,
-Norm G. -
Forgot to save project before laptop shutdown. Is there any way to recover all the captured video?
Is there any way to recover all the video (slides?) captured by Captivate 5 if the project was not saved? Just after I clicked on shutdown to power off my laptop I realized I forgot to save and close my Captivate project and unfortunately windows shut down without any prompting to save anything. There are lots of files (.cpd) in the Adobe Captivate Cached Projects folder but no project file for 2+ hours worth of video snippets. Is there any way to recover those?
thanks!Hello,
I hope to have good news for you. Can you check this blog post, we got the tip from the Adobe dev. team and Kevin did write it out:
Cached projects can save you some cash
Lilybiri -
My laptop was stolen and i have a new one, is there any way to move all the picture folders to the new computer and not lose them? They stole my external harddrive too so unfortunately if i lose these, i have no way to get them back?
What randers4 said. HOWEVER, if the photos were taken with a higher resolution camera than the iPhone what you recover will not be as high a resolution as the originals.
-
I have just signed up for family sharing. Is there any way you can get the same app on two devices but not have to share it? My sons both want clash of clans but they don't want to be on the same village and they can't both be on app at the same time?
hi, the app is not "shared", it works as if you bought the app twice with different accounts, only you paid it once. they should have 2 different villages since they're on 2 different devices.
-
Can we use both INSERT and UPDATE at the same time in JDBC Receiver
Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,Hi ,
If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server. If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam -
s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is there a way to record at the same time analog and digital channels?If,yes can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition
stops by a trigger?.
Thank you for your interest in advances can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.PALE wrote:
>
> I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is
> there a way to record at the same time analog and digital
> channels?If,yes can I have timestamps for each sample?I mean,is there
> a notion of time information on this board?Finally,is there a way to
> know ,in the double buffer's case,the number of samples in the
> halfbuffer which is not full if the acquisition stops by a trigger?.
Start by looking around the examples that ship with LabVIEW (if you are
using LabVIEW).
Also look around zone.ni.com for general data acquisition information &
examples. A good site.
Mark -
ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help
Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe here:
Trouble installing iTunes or QuickTime for Windows
iOS: Device not recognized in iTunes for Windows
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Is there any way to see all the bookmarked pins at once in Map App?!
Hello!
I have been making a route for my next mountaineering trip using the red pins on the map app! i have like 20 bookmarks. I could see all the bookmarks at once and it was so nice. but after I searched another place all the bookmarks dissapeared. now i can see only one of the bookmarks at a time! is there any way to see all of them together again ?! please someone help I put so much affort to find the correct route...Richard,
Is there any way I can simply list everything at once?
The best workaround I'm aware of comes courtesy of BMan1854: Create a Smart Playlist that will Match the following rule: Date Added is after 01/01/2001 (or whatever the day before the day that you first started your iTunes Library is). That playlist will show your entire library.
Or is there a way so that when I add new podcasts it will get rid of the old ones automatically?
Have you gone to the iTunes Edit menu > Preferences > Podcasts tab and checked out the various options listed in the Keep drop-down menu. -
Occasionally hotmail will open just fine but I cannot access any of my listed e-mails or files. At the same time everything works just fine in Chrome. Eventually the problem on Mozilla sorts itself out somehow and I can then open e-mail through that browser again. I don't make any changes on my system to correct the problem.
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
Whether two session with for update at the same time will wait for another?
Will this scenario happen?
One session executes: select ... for update/select ... for update nowait
The other session also executes: select ... for update/select ... for update nowait
Two sessions happens at the same time unluckily. Whether they will all stand by because of "for update" or quit immediately because of "nowait"?
Thx a lot.HiddenName wrote:
This situation is called 'a deadlock'. Oracle will automaticaly detect a deadlock. One of the statements will fail with ORA-00060 deadlock detected;
No, it's not.
A deadlock is when sesson-A has a lock on something that session-B needs in order to continue, and at the same time, session-B has a lock on something that Session-A needs in order to continue. They BOTH have something the other needs.
In the OP's case, at least as he described it, it is simple serialization. The one with the lower scn will go, then the next.
PS.
Why don't you try? You can setup a small table with some records, open 2 sessions to the same database and for example issue UPDATE statements:
session 1: update where id=1
session 2: update where id=2
session 1: update where id=2 - this will hang waiting for session 2 to commit and free lock
session 2: update where id=1 - ORA-00060
You may also read about deadlocks in chapter on "Data Concurency and Consistency" of "Oracle Concepts'. -
Is there any way to make all the inputComponents readon-only in a page
Hi All,
Is there any way by which we can make all the inputComponents belong to a specific iterator as read-only..?
Depending on some condition I want to make all the editable components which belong to a particular iterator, in page to read-only. I can put an expression in the read-only property of all the inputFields
and make them read-only depending on a condition. But this is going to be difficult as we have a lot of pagefragments and Task-flows.
So I think I can do it programmatically. I can add this method as an method binding in the container jsff. So that it will do the job for all the pages [pages may be inside a region also ].
Can any one give a similar code segment to do this..?
Is this approach going to impact performance badly..?
Any comments...
ThanksHi Chacko
Have a look at [Advanced View object Techniqies|http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcadvvo.htm#sthref3138] at the bottom Example 38-32 Preventing Insert, Update, or Delete Based on Custom Properties
<pre>
Example 38-32 Preventing Insert, Update, or Delete Based on Custom Properties
public class CustomViewRowImpl extends ViewRowImpl {
public boolean isAttributeUpdateable(int index) {
if (hasEntities() &&
((isNewOrInitialized() && !isInsertAllowed()) ||
(isModifiedOrUnmodified() && !isUpdateAllowed()))) {
return false;
return super.isAttributeUpdateable(index);
protected void setAttributeInternal(int index, Object val) {
if (hasEntities()) {
if (isNewOrInitialized() && !isInsertAllowed())
throw new JboException("No inserts allowed in this view");
else if (isModifiedOrUnmodified() && !isUpdateAllowed())
throw new JboException("No updates allowed in this view");
super.setAttributeInternal(index, val);
public void remove() {
if (!hasEntities() || isDeleteAllowed() || isNewOrInitialized())
super.remove();
else
throw new JboException("Delete not allowed in this view");
protected void create(AttributeList nvp) {
if (isInsertAllowed()) {
super.create(nvp);
} else {
throw new JboException("Insert not allowed in this view");
// private helper methods omitted from this example
</pre>
Hope, this will help you :)
Regards,
JavaDeVeLoper
Maybe you are looking for
-
Did anybody know about the OMR(Optical mark reader) tools.
I have to read a image file using OMR(Optical mark reader).Did any third party tools for java r available in market? Plz help me....
-
Hi All, I need to perform an equivalent of the Essbase MaxL statement "alter user UserX remove from group GroupX" through the import utility in Shared Services, since the Essbase security is externalized to Shared Services. Can anyone help me on the
-
Piratage de mon mac et pilotage à distance, comment vérifier et que faire?
bonjour, quelqu'un a dû pirater hier mon mac book et pilote à distance. comment en être sûr et que faire? Je crois qu'on a glissé un cheval de Troie via un i-pod nano qu'on m'a demandé (à mon insu) de recharger via USB. Est-ce Possible? Je parcourais
-
No Real time Previews with color management on
Hi Everyone, I use Color management all the time for correctly interpreting YUV footage in CS3, when I try the same techniques in CS4 I cannot get a realtime preview until I turn Color management off ... is any one else experiencing this ? Thanks Nic
-
Hi, What is Process chain, and how to use and in which situation we will create process chain plz can anyone explain me. Thanks, Sheethal