Any way to use connection for Ethernet if wifi not available?

Going to place where there is only wired connection. Is there any way I can connect to Internet from my iPad?

I use a Virgin mobile MiFi which allows upto 5 wireless connections which is basically a Sprint data access for no contract $50.00 /month fee unlimited, lower prices for limited duration/packet charges.
A major decision when purchasing iPad mini WiFi-only vs Cell enable locked to AT&T (yes I know, but have an iPhone already with them).

Similar Messages

Is there any way to use a For Each Loop for each property of an User Defined Type?

Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
Jorge Barbi Martins ([email protected])

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Any way to use merge for mutliple tables w/ shared PK?

If you have multiple tables who share the same PK (or I should say the main table has a certain valye used as Primary Key and then multiple child tables use that PK as a foreign key), would merge be able to work for you?
in my case I have one source table, which is loaded by flat file and represents a flattened record of what would in my database be separated into multiple tables.
I need to update records from that source table where they exist (based on join of non-PK columns) and then insert where they do not exist. So I thought I could utilize the nifty merge command.
However I am quickly realizing this is not a standard use of merge which seems to be designed for going from one source table to one target tables which are roughly equivalent. But in my case I have one source table which has pieces going into table A, other pieces table B, etc... and all those tables share an ID.
So when I first merge into the main table I use a sequence to generate it's PK. But then the problem becomes, how do I then have this same PK used as the value for the FK in the inserts done by the following merge commands for this child tables?

trant wrote:
If you have multiple tables who share the same PK (or I should say the main table has a certain valye used as Primary Key and then multiple child tables use that PK as a foreign key), would merge be able to work for you?
in my case I have one source table, which is loaded by flat file and represents a flattened record of what would in my database be separated into multiple tables.
I need to update records from that source table where they exist (based on join of non-PK columns) and then insert where they do not exist. So I thought I could utilize the nifty merge command.
However I am quickly realizing this is not a standard use of merge which seems to be designed for going from one source table to one target tables which are roughly equivalent. But in my case I have one source table which has pieces going into table A, other pieces table B, etc... and all those tables share an ID.
So when I first merge into the main table I use a sequence to generate it's PK. But then the problem becomes, how do I then have this same PK used as the value for the FK in the inserts done by the following merge commands for this child tables?realize that everyone here speaks SQL
I could better understand what you have & what you desire if you post DDL for all tables
& then you explain what is desired using actual table & column names.
Simply put, I would not recognize any post SQL as being correct, since I do not understand the desired goal/results

Is there any way I can connect an ethernet cable to the air with an adapter?

I have a macbook air which of copurse does niot have an ethernet cable. However, I need to use one rather than wifi. Is there an adapter that would allow me to connect an ether net cable to the Air? I am assuming the answer is no, but thought I would try.
Ray

no there is one
http://store.apple.com/us/product/MC704ZM/A/apple-usb-ethernet-adapter

Any way to use the iPhone on a WiFi network that requires me to..

1. Enter both username and password
2. Download a specific digital certificate before connecting
Can the iPhone do this? All the WiFi networks on colleges and universities here in Norway use the same login and password with a specific digital certificate.

OK, so your old iTunes library was on your PC and now the library is on your Mac? Do I have that right? Your iPhone and iPad were auto syncing to the PC and now you connect them to your Mac and it wants to clear out the media?
This is important, do you have in your iTunes library on your new Mac, the media you want now? Or are you trying to move your media by copying what is on the iPhone/iPad to your iTunes?

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Mac OS X 10.6 Help: Sharing your Internet connection

Is there any way to use a aunetreceive for a track within GarageBand?

Is there any way to use a aunetreceive for a track within GarageBand?
I have an application, Soundboard, which sends audio via the aunetsend plugin. I'd like to manage the output of this application within Garageband as a track. Is there any possible way to do this?
Thanks

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

10.3 - any way to throttle connection attempts?

An elderly friend has a mac running 10.3 on an ADSL link. She's seeing many thousands of ssh login attempts per day, sufficient to eat significantly into her monthly download allowance (the isp charges for traffic, whether there is a successful connection or not). I'm wondering if there is any way to throttle connection attempts back? I.e. I know it is possible to set up iptables that way, but is there any front end for this, or does one have to build the iptables by hand?

Thanks Clea; I hadn't realised OSX didn't use iptables.
Yes, she does need to allow ssh connections (I use ssh to maintain her machine, from a distance of about 10,000 km - not always easy). Of course, this means that I can't risk anything that might disable the ssh connection, since I then wouldn't be able to recover it.
I need to explain that security isn't an issue - the ssh setup is secure, and no attempted breakins have succeeded (only one account is accessible by ssh, and that one has a very secure password). The problem is purely the bandwidth that is being used by the unsuccessful login attempts: I'd like to find a way to simply drop these illicit connection attempts at the firewall (which means they will cost just the 80B or so of the initial connection message) rather than, as now, refuse the ssh connection (which typically costs 2K-4K because of the handshaking that goes on). With 10K illicit connection attempts per day now becoming typical on this network, that's a very substantial bandwidth saving.
Changing the ssh port might do the job, but it looks like a fair amount of work. I'll try it on the weekend.

Any way to use cursor values inside other cursor by bulk collect?

hi,
Is there any way to use cursor get_tables value insdide loop get column if i am using bulk collect in both cursors?
I tried a lot but i am nt able to do it.kindly help...
create or replace procedure MULTIPLE_CURSORS_PROC is
v_owner varchar2(40);
v_table_name varchar2(40);
v_column_name varchar2(100);
cursor get_tables is
select distinct tbl.owner, tbl.table_name
from all_tables tbl
where tbl.owner = 'SYSTEM';
cursor get_columns is
select distinct col.column_name
from all_tab_columns col
where col.owner = v_owner
and col.table_name = v_table_name;
begin
open get_tables;
loop
fetch get_tables into v_owner, v_table_name;
open get_columns;
loop
fetch get_columns into v_column_name;
end loop;
close get_columns;
end loop;
close get_tables;
end ;

hi there
Refer this
CREATE OR REPLACE PROCEDURE MULTIPLE_CURSORS_PROC
IS
   TYPE scol IS VARRAY (10000) OF VARCHAR2 (32767);
   v_table_name    scol;
   v_column_name   scol;
   TYPE curtyp IS REF CURSOR;
   get_columns     curtyp;
   CURSOR get_tables
   IS
      SELECT   DISTINCT tbl.table_name
        FROM   all_tables tbl
       WHERE   tbl.owner = 'SYSTEM';
BEGIN
   OPEN get_tables;
   LOOP
      FETCH get_tables BULK COLLECT INTO   v_table_name;
      FOR indx IN v_table_name.FIRST .. v_table_name.LAST
      LOOP
         SELECT   DISTINCT col.column_name
           BULK   COLLECT
           INTO   v_column_name
           FROM   all_tab_columns col
          WHERE   col.table_name = v_table_name (indx);
         FOR ind IN v_column_name.FIRST .. v_column_name.LAST
         LOOP
            DBMS_OUTPUT.put_line (v_column_name (ind));
         END LOOP;
      END LOOP;
      EXIT WHEN get_tables%NOTFOUND;
   END LOOP;
   CLOSE get_tables;
END MULTIPLE_CURSORS_PROC;regards
Hitesh

Any way to use filter to exclude tables in navagation pane?

Is there any way to use filter to exclude a set of tables from the table list in the navagation pane? I have a number of tables (15+) starting with the same prefix eg. AB123 that I would like eliminate from the list. They sort right to the top and I always have to scroll down, and go through the show more dialog to see the entire list.
I am sure I'm missing something, but not sure what. Help Center has nothing to offer.
Thanks
Glenn

This has been mentioned on the forum before - basically the need for more elaborate ways to filter (multiple conditions as well as 'not like'). It is on our list for future consideration, meaning post-production.
-- Sharon
Message was edited by:
sbkenned

Any way to use a quick and dirty icon like cLabel in the quick tools toolbar?

I am a javascript cut-and-paster with ability to cobble things together.
In previous versions of Acrobat, I had tools that were added to the toolbar using the technique shown in this script:
app.addToolButton({cName: "MyFlattenButton",
   cLabel: "Flatten",
   cEnable: "event.rc = (app.doc != null);",
   cExec: "flattenPages();"
That would create a toolbar button with the "icon" that read "Flatten" which is all that I needed. I could click on it and it would flatten all pages in the document.
I used this to create several different tools, all with different names and cLabels.
This script still works in Acrobat XI (it adds the tool to the add-on tools list, and then I can add it from there to the quick tools toolbar). The cLabel names show up in the add-on tools list, but not in the quick tools toolbar. In the toolbar they all use the same generic icon (but they all work correctly).
From reading in this forum I see that there is a way to create a custom icon but it does not look easy. Is there any simple way to just have text appear as the icon as I used to do for earlier versions of Acrobat?
Thanks.

One further question...
I found a code snippet somewhere online that attempted to deal with this issue. That led me to this (failed) solution:
this.importIcon("myIconFlat", "/D/J/CAD Standards/Stamps/Acrobat tools/flatten.jpg", 0);
var flatIcon = util.iconStreamFromIcon(this.getIcon("myIconFlat"));
app.addToolButton({cName: "MyFlattenButton",
   cLabel: "Flatten",
   oIcon: flatIcon,
   cEnable: "event.rc = (app.doc != null);",
   cExec: "flattenPages();"
The problem there is that importIcon is not allowed from a folder-level javascript, apparently. Would there be any way to use the importIcon part of this from the console and then cut and paste some output into the rest of the script? Just looking for a way to get the icon into my script.

Is there any way I can connect my iPhone to my projector to demonstrate an app?

Is there any way I can connect my iPhone to my projector to demonstrate an app?

Yes, there are cables in the Apple Store that will send video to an external screen, but it depends on the app....3rd party apps may need to be written to allow video out...some mirror the iPhone screen and some only use the external - it depends on how the app works, etc.
Start by getting a compatible cable.

Is there any way to use a file transfer protocol to upload files to icloud?

Is there any way to use a file transfer protocol to upload files to icloud?

Unfortunately, no.
You will need a 3rd party web host to upload your websites to. Depending on the version of iWeb you are using you have a couple of publishing options:
iWeb ’09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like “www.YourDomain.com/sitename/Home.html )
iWeb ’08 you can publish your website to a local folder
Basically all Web Hosting companies are iWeb-compatible.
If you’re looking for a good hosting I would recommend IX Web Hosting I have been using them to host my own websites for several years now and that their customer support is awesome too.
http://jeffnitschke.com/IXWebHosting.html
http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
"I may receive some form of compensation from my recommendation or link."

Is there any way to use Internet Explorer on a Mac? I have one insurance company that I do business with that you must use internet explorer

Is there any way to use Internet Explorer on a Mac Book Pro? I have one company that I do business with that only uses Internet Explorer

Internet Explorer is not available for Mac.
But you can make Safari pretend to be Internet Explorer in some cases.
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop, move mouse down to "User Agent".
    Select Internet Explorer from popup on the rightside.
    After using Internet Explorer, revert back to Safari, doing the same routine.

Any way to use connection for Ethernet if wifi not available?

Similar Messages

Maybe you are looking for