Any way to use News Group Reader for Discussions?

After the last few days of slow forums and the loss of notifications of posts... just curious. Is there any way to view these forums with a news group reader like Entourage or Halime or any Apple product?
If not... it would be nice...

Jefferis,
Hopefully you will no longer need this as Apple Discussions performance has improved greatly, but I will point out that you can create RSS feeds from search queries.
Unfortunately there has never been enough requests for newsgroup access for us to invest it. We get about one request per year.
Kind regards,
Mark
Apple Discussions

Similar Messages

  • I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    Welcome to the Apple Community.
    Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
    Any responses you may receive may well be removed and would be wholly unreliable in any case.
    If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

  • Any way to open new browser window without using image maps?

    Is there any way to open new browser window without using image maps? My code works fine in Firefox, but not in IE. There are 2 problems in IE: 1st is that the thumbnail images move up within their own borders & 2nd that when you click on an image it does open up a new browser window, but also redirects to the index page (in this case it's just a placeholder index page - the new one I've called index_new.html for the time being).
    Here is the link:
    http://www.susieharperdesigns.com/gallery_beads.html
    Any help is greatly appreciated.

    Your missing a value on the HREF.  In your code you have this:
    <area shape="rect" coords="-24,-9,106,144" href=" " onclick="MM_openBrWindow('gallery_bead1.html','','width=255,height=360')" />
    </map></div>
    and it should be this:
    <area shape="rect" coords="-24,-9,106,144" href="javascript:void()" onclick="MM_openBrWindow('gallery_bead1.html','','width=255,height=360')" />
    </map></div>
    If you fix the code on all your beads, it should work.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Is there any way to use a aunetreceive for a track within GarageBand?

    Is there any way to use a aunetreceive for a track within GarageBand?
    I have an application, Soundboard, which sends audio via the aunetsend plugin. I'd like to manage the output of this application within Garageband as a track. Is there any possible way to do this?
    Thanks

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Is there any way to use a For Each Loop for each property of an User Defined Type?

    Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
    Jorge Barbi Martins ([email protected])

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

    Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

    Mac OS X 10.6 Help: Sharing your Internet connection

  • Is there any way to use embedded commands in text to create pauses when using text to speech in iOS 5? You can do it in OS X by typing [[slnc 2000]] to get a two-second pause.

    Is there any way to use embedded commands in text to create pauses when using text to speech in iOS 5? You can do it in OS X by typing [[slnc 2000]] to get a two-second pause.

    Thanks for the reply Russ.
    Yes, I've considered adding titles and/or generators in the FCPX storyline, but this creates a need to render the entire timeline. As I'm juggling library locations and hard drive spaces I just didn't want to add a new render that will occupy a lot of space. It's also a bit of visual clultter for me, so my goal is to find the best workflow for adding this stuff on or after export.

  • Any way to create a keyboard shortcut for keywords in Bridge CC?

    Just curious if there's any way to create a keyboard shortcut for "new keyword" and "new sub keyword" in Bridge CC?
    If not, that would be a welcome addition in any future Bridge update - being able to customize keyboard shortcuts or add your own the way you can in Premiere Pro CC.

    Steve,
    Not, as far as I know, directly, but the problem is with Aperture, not Keyboard Maestro.  Aperture has no command (afaik) for selecting the caption field of the Info Inspector.  Without a command, you will have to find another way to access it, or another way to accomplish what you want.
    You can specify the spot clicked by screen coordinates, so you cold use the Inspector HUD and the coordinates of the Caption field, as long as the Inspector HUD always pops up in the same location.
    Many dialog boxes allow the user to advance through the fields with the Tab key.  Unfortunately, the number of times you have to type "{Tab}" in order to get to a particular field depends on other interface elements (if the Control Bar is showing, add 2).  I don't know of a way to determine if the Control Bar is showing.
    You might find a work-around using a Metadata Preset and the Batch Change command.  Keyboard Maestro can easily pop up a dialog with a text field in which you can type what you want to go into Aperture's Caption field.
    The best thing to do is download the trial version and see if it meets your needs.  Keyboard Maestro is adept at creating macros based on keyboard input.  If the program does not provide keyboard equivalents, writing an effective macro becomes difficult.
    http://www.keyboardmaestro.com/main/
    The author provides exemplary documentation:
    http://wiki.keyboardmaestro.com/About_Keyboard_Maestro
    Lastly, for the use you cite, I simply show the Inspector if it's not showing (by typing "i"), change to the Info tab if it is not currently activated (by clicking, but note that opening the Inspector with the Info tab selected can be done with one command "View➞Inspector➞Info"), and then clicking in the Caption field, which is part of all of the Metadata Views I regularly use.
    HTH.  Perhaps one of our programming mavens will suggest something better.
    --Kirby.

  • Is there any way to use -useLegacyAOT option in FlashBuilder 4.6?

    I need to build my ipa with old version of Engine because i have some problems about loading images from outside. Since with Air 15 it is default engine, and i cannot quit Air 15 because of the iTunes specs. I cannot add -useLegacyAOT=yes to compiler options on Adobe Flash Builder 4.6 because it seems that it can be added at FB4.7.
    So is there any way to add this options when i am using FB4.6
    Thanks in advance.

    DeepakJ wrote:
    Hi,
    Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
    Is there any way to modify the SQL query.
    SQL
    select dept, loc, count(*)
    from dept
    group by dept, locOutput-1
    Dept      Loc       Count(*)
    10         AA        1
    10         BB        2
    10         CC        2
    20         AA        2
    20         BB        2Output-2
    Dept      Loc       Count(*)
    10         AA        1
    BB        2
    CC        2
    20         AA        2
    BB        2
    Yes, using the <tt>lag</tt> analytic function and specified ordering of the data:
    select
        nullif(d.deptno, lag(d.deptno) over (order by d.deptno, d.loc, e.mgr nulls first)) deptno
      , nullif(d.loc, lag(d.loc) over (order by d.deptno, d.loc, e.mgr nulls first)) loc
      , e.mgr
      , count(*) n
    from
        dept d
          join emp e
            on d.deptno = e.deptno
    group by
        d.deptno
      , d.loc
      , e.mgr
    order by
        d.deptno
      , d.loc
      , e.mgr nulls first;
    DEPTNO  LOC       MGR   N
        10  NEW YORK         1
                      7782   1
                      7839   1
        20  DALLAS    7566   2
                      7788   1
                      7839   1
        30  CHICAGO   7698   4
                      7839   1
        40  BOSTON    7698   2
                      7902   1

  • My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

    My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

    Hi cindy,
    If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
    Here's what I mean:
    If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
    However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
    You would need to authorize the computer for each of the new Apple IDs.
    Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
    So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
    The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
    Hope that helps,
    GB

  • Is there any way to create admin role only for one resource.

    Hi all,
    I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
    Is there any way to create admin role only for one resource?
    I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
    It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
    Please suggest,
    thanks

    The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

  • Is there any way to use Control Break in a SQL Query

    Hi,
    Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
    Is there any way to modify the SQL query.
    SQL
    select dept, loc, count(*)
      from dept
    group by dept, locOutput-1
      Dept      Loc       Count(*)
      10         AA        1
      10         BB        2
      10         CC        2
      20         AA        2
      20         BB        2Output-2
      Dept      Loc       Count(*)
      10         AA        1
                 BB        2
                 CC        2
      20         AA        2
                 BB        2Thanks,
    Deepak

    DeepakJ wrote:
    Hi,
    Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
    Is there any way to modify the SQL query.
    SQL
    select dept, loc, count(*)
    from dept
    group by dept, locOutput-1
    Dept      Loc       Count(*)
    10         AA        1
    10         BB        2
    10         CC        2
    20         AA        2
    20         BB        2Output-2
    Dept      Loc       Count(*)
    10         AA        1
    BB        2
    CC        2
    20         AA        2
    BB        2
    Yes, using the <tt>lag</tt> analytic function and specified ordering of the data:
    select
        nullif(d.deptno, lag(d.deptno) over (order by d.deptno, d.loc, e.mgr nulls first)) deptno
      , nullif(d.loc, lag(d.loc) over (order by d.deptno, d.loc, e.mgr nulls first)) loc
      , e.mgr
      , count(*) n
    from
        dept d
          join emp e
            on d.deptno = e.deptno
    group by
        d.deptno
      , d.loc
      , e.mgr
    order by
        d.deptno
      , d.loc
      , e.mgr nulls first;
    DEPTNO  LOC       MGR   N
        10  NEW YORK         1
                      7782   1
                      7839   1
        20  DALLAS    7566   2
                      7788   1
                      7839   1
        30  CHICAGO   7698   4
                      7839   1
        40  BOSTON    7698   2
                      7902   1

  • Any way to use a quick and dirty icon like cLabel in the quick tools toolbar?

    I am a javascript cut-and-paster with ability to cobble things together.
    In previous versions of Acrobat, I had tools that were added to the toolbar using the technique shown in this script:
    app.addToolButton({cName: "MyFlattenButton",
       cLabel: "Flatten",
       cEnable: "event.rc = (app.doc != null);",
       cExec: "flattenPages();"
    That would create a toolbar button with the "icon" that read "Flatten" which is all that I needed.  I could click on it and it would flatten all pages in the document.
    I used this to create several different tools, all with different names and cLabels.
    This script still works in Acrobat XI (it adds the tool to the add-on tools list, and then I can add it from there to the quick tools toolbar).  The cLabel names show up in the add-on tools list, but not in the quick tools toolbar.  In the toolbar they all use the same generic icon (but they all work correctly).
    From reading in this forum I see that there is a way to create a custom icon but it does not look easy.  Is there any simple way to just have text appear as the icon as I used to do for earlier versions of Acrobat?
    Thanks.

    One further question...
    I found a code snippet somewhere online that attempted to deal with this issue.  That led me to this (failed) solution:
    this.importIcon("myIconFlat", "/D/J/CAD Standards/Stamps/Acrobat tools/flatten.jpg", 0);
    var flatIcon = util.iconStreamFromIcon(this.getIcon("myIconFlat"));
    app.addToolButton({cName: "MyFlattenButton",
       cLabel: "Flatten",
       oIcon: flatIcon,
       cEnable: "event.rc = (app.doc != null);",
       cExec: "flattenPages();"
    The problem there is that importIcon is not allowed from a folder-level javascript, apparently.  Would there be any way to use the importIcon part of this from the console and then cut and paste some output into the rest of the script?  Just looking for a way to get the icon into my script.

  • Is there any way to display filenames or captions for photos?

    is there any way to display filenames or captions for photos?

    Thanks. There are so many it's very hard to see which one does what. Since I edit  on the MacBook Pro using Photoshop Elements, all I really need is a way of seeing the filenames, and secondarily re-arranging thumbnails on the iPad screen manually.

  • Is there any way to use a file transfer protocol to upload files to icloud?

    Is there any way to use a file transfer protocol to upload files to icloud?

    Unfortunately, no.
    You will need a 3rd party web host to upload your websites to. Depending on the version of iWeb you are using you have a couple of publishing options:
    iWeb ’09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like “www.YourDomain.com/sitename/Home.html )
    iWeb ’08 you can publish your website to a local folder
    Basically all Web Hosting companies are iWeb-compatible.
    If you’re looking for a good hosting I would recommend IX Web Hosting I have been using them to host my own websites for several years now and that their customer support is awesome too.
    http://jeffnitschke.com/IXWebHosting.html
    http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
    "I may receive some form of compensation from my recommendation or link."

Maybe you are looking for

  • Cannot send email to Smart Group from Address Book

    I created several Smart Groups in Address Book but I can't use any of them to send email. When I right-click the group name and choose Send Email, it opens my default email program (Thunderbird) and puts only the name of the Smart Group into the To:

  • Multiple Contacts with the Same Number

    https://discussions.apple.com/thread/1583335?start=0&tstart=0 I found that thread but I can't reply to it (it's been archived), and I want to know why Apple feels there is no need to make this distinction. People in that thread suggested it operates

  • Adding nodes to specific positions of JTree

    Hi guys, I have a JTree that basically represents a file explorer with all the folders and files in a drive. I want to automatically refresh the tree if there are any new files added to that drive. What my idea was to: 1. Set a timer to check the lis

  • Ref cursor question

    Hi, I have stored proc that takes pl/sql table as IN parameter and returns a ref cursor. Data from pl/sql table is separated into two table type objects ... oType1 and oType2 based on some condition. following works fine... If oType1.Count > 0 then  

  • .png files will not open Fireworks from Dreamweaver.

    Hi there, I wonder if anyone can help - I am a new to this forum, so please be gentle! I am running the new Adobe Creative Suite 3 Web Standard on a new 17" MacBook Pro with 2Gb memory. I have hit an odd snag when I am in Dreamweaver working on my an