Any westcoast Canada users out there?

I have a hard time setting up pop mail in mail 3.3, not matter what I do, I can only send but cannot receive email. I have talked to both my work and home isp, no luck with that. Is there anybody using Shaw or Telus can answer my question? Thanks Alex

Like I said, I'm using IMAP, so my settings won't help you if you are wanting to configure POP. They will only help you if you switch to IMAP.
It only takes a minute or two to visit Telus' customer website and switch to IMAP. Do you still want me to share my IMAP settings with you?

Similar Messages

Are there any Blender 3D users out there.... Node editor glitch

I work on a MacBook Pro (Santa Rosa 2.2) with OS X 10.4.11 and have noticed that the "previews" in the node editor have weird lines and visual glitches. See http://entplex.org/node_preview.png and http://entplex.org/node_preview2.png. Note the static in the viewer and comp nodes. This occurs with both 2.44 and 2.45. This occurs with ANY node setup I try and even after reseting user defaults in blender. I have even gone as far as trying to run blender from a clean install of os x on an external hard drive. Has anyone else noticed this or is there something wrong with my system? Can anyone confirm or deny this?

*looks like a graphics card issue.*
*try looking here: http://www.blendernation.com/2008/02/22/blender-problems-on-leopard-solved/*
*Also, that stretching comes from your (output) format ... usually.*
*I'd try moving your output to ntsc (720x486) and deselecting fields (if those are selected)*

Any former Avid users out there....

I am helping a another company gather footage from our library. However, they use Avid (PC version) and we run all Final Cut. Two days ago I gave them a hard drive with all the digitized footage as Quicktime movies using either an HDV codec (HDV 720p30 shot from a JVC GY-HD100) or DV/DVCPRO NTSC codec.
The producer and editor have both told me that they cannot open some of the files and are having problems bringing other files into Avid. So what is the native file format/codec for Avid? Should I give them avi files?
While I have not worked with Avid directly I assumed it was similar to FCP (or maybe FCP is similar to Avid depending on which side of the fence you're on). I figured you could ingest just about anything and while you may have to render it, it should fit on the same timeline.
As a small insight, I talked to the producer yesterday who said that some of the footage was in an odd size. He said it was bigger than the usual 720 by something (these are the producers words paraphrased). I told him it was high definition. He said well let me pass you over to the editor whose cutting the project. The editor gets on the phone and asks, "As part of your normal workflow do you guys normally mix SD and HD in the same project?" Apparently he'd never heard of doing such a thing.
I wasn't sure if this guy had just crawled out from under a rock and realized that much of the Western world was now getting more involved with HD...maybe he just watched the Super Bowl in High Definition. I don't know, but I told him that we do it all the time - upres SD to HD or downconverting HD to SD is a pretty common part of our workflow.
So I am trying to figure out how can I give the footage to them so they can easily ingest it (avi, OMF, Quicktime with a certain codec, etc). I am not getting paid to do their laundry so I am trying to make it as simple as possible to get this footage to them. Any ideas?

You might have an incompatibly formatted drive. Some of your files are accessible in that file structure, others are not. Seen it happen. No clue.
Or, of course, you could send them a tape or two, then let them recapture.
<
This is the best possible solution unless you are prepared to work on the least common denominator which is likely to be an extreme choice: the lossless and hugely prolific Animation codec. (There must be other inter-platform codecs, I've never used Avid, so I dunno)
You can get additional help by posting a similar question on an Avid forum. Try creativecow.net and try not to take the elitists personally over there. They think anything that isn't purple is a threat unto their livelihoods and are likely to be rather, umm, snippy. Not like us at all.
Suggest you couch it like this: "I had to give up my favorite and ultracool Avid to go to work at a shop that is all, get this, Final Cut. I used to be able to exchange my QT files with my old Avid Macintosh chums easily but some of my old Avid chums have been forced to switch from their Macs to PC versions (can you IMAGINE?) and they need media from me. I use these formats on FCP (list here). What's the no-brainer pathway for us to exchange media freely and openly since we're all brothers and sisters working together on the same creative team and want to be able to work together without any finger-pointing since none of our editing platform decisions were our own."
bogiesan

Any UK/European users out there?

Does anyone have any insight into the practicalities of iPad use between countries? In my case, I live in UK (and can buy an iPad here) ... but I also spend time in Italy, where I would like to use it to access the Internet and e-mail. How do I do that?
I'm trying to avoid paying the roaming charges, by having two accounts and two sim cards , so that , if possible I am charged the respective rates for whichever country I am in. Anyone know if this is feasible?

Brought my IPad 3G which was purchased in the USA to the UK and went to the Apple Store in Cambridge for help on changing from AT&T to a UK sim card provider. Their genius offered no help. Went to the O2 store and they had a mini sim card and account for the IPad however when the sim card was inserted it would not bring up the account set up portal View Account so there was no way to set up the account on my IPad. Fortunately the manager of the store had a IPad 3G which he purchased in the UK and he was able to set up my O2 sim card account on his IPad and then move it to my IPad. This round about worked and I was able to use 3G which is very spotty in the UK during my visit. However, there was NO View Account setting to cancel the the account and I had to go back to the store and have the same manager put the sim card into his IPad to cancel the account prior to leaving. This experience would negate that you can easily travel and use mini sim cards from other countries in your IPad. Is this a glitch with Apple software that does not allow you to open multiple sim card accounts? Regardless, it needs to be addressed and corrected by Apple as many people like myself purchased the 3G model believing the marketing that they could easily use it with multiple sim card accounts while traveling abroad. I appreciate any comments...especially from Apple.

Any IMAC Reason user out there (music heads)

I just purchased 20inch Imac 3weeks + bought Reasons 3.0..... It ask me to install the 3.0.5 for intel MACS.
which I did ......
Problem installing Reason ... The error message "can not locate Reason Audio engine".
My exec partner has a 17inch IMAC..its about 6mos old.. It installed smoothly
I'm not sure if maybe Intel/MAC has a conversion duo update that allow programs to install
or Do i need to disable something ? or a folder..
Please help
Thanks
I mac 20 inch Mac OS X (10.4.9) Reasons / Protools (MBOX2)

Propellehead has an article on that problem here, but not having an account with them (and not wishing to set one up), I can't read it and so be sure it will address your issue. Worth checking out, though.

Any iPhone Application Developers out there?

Hi All-
Any accepted iPhone Developers out there? I'm looking to partner with someone to create an application that would be a huge benefit for users of the iPhone. If accepted into the App Store, this app would be a great utility for all users. I'm not a developer and would love to find someone willing to work on this little idea.
Thanks
Dave

Jim Short wrote:
As others have expressed in this forum, I have a concern working at a defense company where cameras are not allowed. As cool as the iPhone is, I would not want to be fired for if Security discovers me with it!
I have read in other posts about people who have had the camera hardware removed for a fee, but this seems like a costly, extreme solution with the risk of breaking it and voiding the warranty.
If there are any iPhone application developers out there looking for something to do, it seems like it would be simple to develop a utility that would temporarily disable or enable the camera in a way that could be easily demonstrated to a security guard.
Are there any takers out there? Can this be done?
The camera cannot be turned off. Even if it could, the fact that it still has a lens isn;t going to stop security from stopping you.

I have an iMac 27" which is 4 years old and probably overdue for a clean-up. Is there any good reliable software out there that would help? Has anyone had any experience of 'Mackeeper'?

I have an iMac 27" which is 4 years old and probably overdue for a clean-up. Is there any good reliable software out there that would help?
Has anyone had any experience of 'Mackeeper'?

Check how many applications are starting when you log in, I found that if there was a lot of activity at login Finder did not display the icons on the desktop correctly, again like you it did not occur at every login, just occasionally.
For Safari have you tried resetting Safari, if that does not help you could disable plugins and extensions one at a time. You may find one of those is causing the problem.

My PC doesn't recognise my iPhone6, any trustworthy driver downloads out there?

My PC doesn't recognise my iPhone6, any trustworthy driver downloads out there?

Well, did you try on different USB ports ..? Once you connect your device in to PC, then unlock the device screen and see if device asks "trust this PC." or not.
As i said "try to use a different USB ports." Or, USB cable is the original one, right ?
If you run any antivirus softwares, disable it then. Besides, check the internet firewall enabled or not.
If iTunes does not recognize your device, then you do need to uninstall iTunes and then re-install it.
https://support.apple.com/en-us/HT204095

Any Drum & Bass producers out there?

Any Drum & Bass producers out there?
I'm trying to find the perfect bassline sound like the one bad company (drum & bass group) uses in "The Nine" and "4 Days". The basslines are basically full and warm with fuzzy modulation.
I've tried Atmosphere, Trilogy, NI Photone, and ES2-so far and there are some okay stuff in there but doesn't quite make the cut. Just wondering if there are any other virtual instruments I could check out or if there are any tutorials on how to program your own.

did u try the fabfilter twin(vitrual synth).if not u have to download it.and if u spend five minute on there web site u 'll find a demo made by PHOTEK (that convinct me to buy it)great synth,brand new.there is actually an offer till middle of january.the only bad point is :the demo's comming without any preset...
demo version(extremely easy to instal)
http://www.fabfilter.com/download/
PHOTEK demo(middle of the page,quicktime streaming)
http://www.fabfilter.com/products/twin.asp
if u like that try also the filter(volcano);)
2x2.7 Mac OS X (10.4.3) logic 7.1.1

Any Better EMail Program Out There for Macs?

I used Eudora as my email program for 10 years and loved it. Unfortunately, it became very buggy on the Snow Leopard operating system. Entire mail boxes got corrupted. So, I had to find a new mail program. I was told that Apple Mail was the best and have been struggling to have it meet my needs for the past few weeks.
Is there any other program available out there that is more like Eudora, but still supported with a new version for Snow Leopard - or at least an be run on this operating system?
Thanks!

IMHO, Mail is the best. It will take a lot of getting used to for someone migrating from Eudora, though. I used to use Eudora as well, but gave it up years ago in favor of Mail.
Thunderbird will have some features that Mail lacks, but in turn lacks a lot of the polish and some very basic features that Mail has. For example, my wife was trying just two days ago to send a message to a subset of a group defined in Thunderbird's address book, and after ten minutes of both of us trying to figure it out, we finally gave up and she used _pen and paper_ to note the addresses. Doing this would have been trivial in Mail. These sorts of little not-uncommon niggling issues would prevent me from ever using Thunderbird myself.
You could also try [MailSmith|http://www.mailsmith.org>, which was a pretty compelling mail client once upon a time, but which I haven't looked at in many years.

Any good workflow tutorials out there for those moving from iPhoto Aperture

Any good workflow tutorials out there for those moving from iPhoto to Aperture 3?
Especially those that deal with using a laptop and off-line storage of photos.
Cheers, Andrew.

There is no reason to not port a number from another provider (unless leaving a contract early and being charged the ETF) for if one does decide to switch back to their previous provider within the first 30 days after making the switch, the previous provider will take one back with welcome arms and the same phone number can be used this way.
Your way required getting a new phone number which can't be changed or potted after the fact for single line account.

OT - Ratio of Thunderbird users out there?

What do you suspect is the ratio of Thunderbird (email
client) users out
there? If I need to narrow it down, I'll say North America.
Rough guesstimate is fine..

On 01 Dec 2006 in macromedia.dreamweaver, R. Jay wrote:
> What do you suspect is the ratio of Thunderbird (email
client) users
> out there? If I need to narrow it down, I'll say North
America.
>
> Rough guesstimate is fine..
7%. I have 161 messages in my inbox dating back to 2 Oct
2006. Of the
161, 11 show "User-Agent: Thunderbird ..." in the headers.
(10 of
those were 1.5.0.7.) Of the remaining 150, 106 have an
X-Mailer
header, which breaks out like this:
7.0 for Windows sub 123 1
8.0 for Windows sub 6036 2
9.0 for Windows sub 5039 3
9.0 for Windows sub 5060 1
9.0 for Windows sub 5125 1
AOL WebMail 20836 2
AOL WebMail 22250 3
BigSender
http://CraigRichards.com/software
1
Juno 5.0.49 1
Listrak 1
Lotus Notes Release 6.5.5 November 30, 2005 2
MIME::Lite 2.117 (F2.6) 7
Microsoft CDO for Windows 2000 1
Microsoft Office Outlook 11 4
Microsoft Outlook Express 6.00.2800.1106 3
Microsoft Outlook Express 6.00.2900.2180 1
Microsoft Outlook Express 6.00.2900.2869 25
Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) 2
Microsoft Outlook, Build 10.0.3416 6
Novell GroupWise 5.5.5 3
Pegasus Mail for Windows (4.21c) 2
QUALCOMM Windows Eudora Version 7.0.1.0 21
Unknown (No Version) 1
Webmail Version 4.0 12
A lot of the rest are Hotmail. As always, YMMV.
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/email.php

Any 1st Gen iPod users out there? M8541

All this talk about shiny new iPods has got me all nostalgic over my lovely old 1st gen scroll wheel model (M8541). Alas the hard disk died on that a year ago and it's been gathering dust ever since.
I've been Googling trying to find others in the same predicament, and hopefully some details on how to obtain a new/refurbed hard disk and bring the old timer back to life. Alas, I've not got very far as yet, which either means my searching skills aren't up to much, or it's just way too difficult so no-one's succeeded.
What I'd really like is to find some kind of flash memory with the same ATA-5 interface used by the original disk, so I can have something a bit more durable in there. I'm sure this must be possible and am hoping there might be someone out there who's tried the same or knows enough to convince me I'm wasting my time.
I've found what looks like a viable replacement disk here :
http://www.evertek.com/viewpart.asp?auto=14710
Price is good too, though the part number is MK5002MAL-R where my original doesn't have the -R on the end, so not sure it's a drop-in replacement.
Help, anyone?
Firebook 1.67Ghz Mac OS X (10.4.7) 1st gen iPod and Nano

I have this model too. Is yours a 5 or 10 GB? Also, I you using it on Win or Mac? Mine is Mac but want to use it on Win.....is it possible to reformat it to work? I;ll see if my search skills can help ya find a new HD for yours.
Thanks
Windows XP

Any P45 Diamond overclockers out there?

Hello all, first post on this forum for me here.
Was wondering if there are any P45 Diamond users/overclockers around that have experience in using GTL values.
Thing is, im overclocking atm stable at 3.8 ghz with a q9450. (8x475)
I have tried many settings regarding the GTL. None really helped. The only settings that helped was upping de VTT to 1.30, and the vcore to 1.36.
Just that i dont like the fact that i have to push the volts that high. Reading around the web showed that GTL can let me use lower voltages.
Also i have tried to reach 4 GHz, wich i could run but with higher voltages only.
Dont worry about my cooling btw, i got a bigwater set from thermaltake, that also cools the NB.
Something else thats prolly kinda interesting to say, the 1.1 BIOS sucks when it comes to my system. I cant get anything stable above 3.2 GHz for some reason. I reverted back to 1.0 and let me go up to 3.8 again.
There is another problem with my DDR3 memory it seems, when it goes above 1450~ MHz respectively, then the system does not post at all. But running it on 1266 gives me no memory issues. (FSB:DRAM 3:4).
I'll make a post about this issue later in another section of the forum.
So to get back to the origin of this post.
Is there anybody out there that can help me with the GTL values?
Needless to say its about a 45nm quad cpu.
I'll list my specs :
MSI P45 Diamond
Q9450 @ 3.8 GHz, 8x 475 FSB, 1.36 vcore (1.34 under load), 1.30 vtt.
OCZ3G16001G 2GB DRR3 1600 @ 1266 MHz (3:4)
XFX GeForce 8800 GTX 768 @ 600 core/950 memory (factory default, its OC but i didnt do it)
Sound Blaster X-Fi (lovely card included with the board )
RAID 0 config thru the use of the ICH10 chip.
Thermaltake Bigwater water cooling in a Thermaltake Armor case.

Quote from: Learey on 30-July-08, 22:29:35
Hello all, first post on this forum for me here.
Was wondering if there are any P45 Diamond users/overclockers around that have experience in using GTL values.
Thing is, im overclocking atm stable at 3.8 ghz with a q9450. (8x475)
I have tried many settings regarding the GTL. None really helped. The only settings that helped was upping de VTT to 1.30, and the vcore to 1.36.
Just that i dont like the fact that i have to push the volts that high. Reading around the web showed that GTL can let me use lower voltages.
Also i have tried to reach 4 GHz, wich i could run but with higher voltages only.
Dont worry about my cooling btw, i got a bigwater set from thermaltake, that also cools the NB.
Something else thats prolly kinda interesting to say, the 1.1 BIOS sucks when it comes to my system. I cant get anything stable above 3.2 GHz for some reason. I reverted back to 1.0 and let me go up to 3.8 again.
There is another problem with my DDR3 memory it seems, when it goes above 1450~ MHz respectively, then the system does not post at all. But running it on 1266 gives me no memory issues. (FSB:DRAM 3:4).
I'll make a post about this issue later in another section of the forum.
So to get back to the origin of this post.
Is there anybody out there that can help me with the GTL values?
Needless to say its about a 45nm quad cpu.
I'll list my specs :
MSI P45 Diamond
Q9450 @ 3.8 GHz, 8x 475 FSB, 1.36 vcore (1.34 under load), 1.30 vtt.
OCZ3G16001G 2GB DRR3 1600 @ 1266 MHz (3:4)
XFX GeForce 8800 GTX 768 @ 600 core/950 memory (factory default, its OC but i didnt do it)
Sound Blaster X-Fi (lovely card included with the board )
RAID 0 config thru the use of the ICH10 chip.
Thermaltake Bigwater water cooling in a Thermaltake Armor case.
Aaron can you please help me with the oc of mine p45 diamond with E8400 wolfdale cpu.
I am no at 3.3ghz with all at automatic.
Can you contact me please on msn

Are there any web-based products out there for client project and interaction...

Dear Web Designers,
Is there any open source, free, php software packages out there (or web products - a doc com tool) that allows a web designer freelancer (like me) who has their own business to take in client requests or new project request descriptions and requests from anyone and allow me to respond back with an answer, a timeline, status on the project etc etc. (besides just a standard contact us form - is there any project managment tool for web designers that works well for that?)
Andrew

Sure. There are lots & lots of them. It depends on your coding skills, which scripts and databases your server supports, and how many bells & whistles you want.
osTicket ~
open source (free), requires PHP & MySql on your server
http://osticket.com/features.php
Zendesk ~
commercial help desk system. 30 Day free trial available.
http://www.zendesk.com/pricing
You'll find many others on Google
http://www.google.com/search?q=web+site+help+desk+system&ie=utf-8&oe=utf-8&aq=t&rls=org.mo zilla:en-US:official&client=firefox-a
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Any westcoast Canada users out there?

Similar Messages

Maybe you are looking for