Any widget / component available to support flow type model
Hi,
Anyone knows any widget / component available to support flow type model. For example... the flow should be shown in the below model, where '0' represent the node and lines represent the flow [$ used to fill the shapes in the forum to avoid formatting issue]...
$$$$$ *0---------0---------0*
$$$$ */* $$$$$$$$$$$$$$$$$$ \
*0----0---------0------------0-------0*
$$$$ \ $$$$$$$$$$$$$$$$$$ /
$$$$$ *0---------0---------0*
Edited by: user13419369 on Sep 13, 2012 10:30 AM
Have you using [url http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_train.html]af:train
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/index.jspx#%2Fcomponents%2Ftrain.jspx
-Arun
Similar Messages
-
360 panoramas in ibook authoring. Is there any widget already available?
I would like to publish a ibook with immersive panoramas. I know how to display them on the web with HTML5 but I have no idea how to do it in iBook author. Ihave done a search on the web but cannot find much. Does anyone have any suggestions on this topic?
This will allow you to create panorama and output to html5. You can then package as a widget and use in iBooks.
http://gardengnomesoftware.com/pano2vr.php
Cheers!
Jim -
Any idea about Travellers warranty support policy?
Apple support senior advisor mentioned about travellers policy for international warranty support but doesn't give clear idea. Any one have availed such support, any idea?
I don't know who this "senior advisor" might have been or what he or she might have been referring to, but Apple at this time has no program for international warranty for travellers; at least, nothing that they have announced. Whether they might be considering such a program I can't say, and I doubt that any person in Apple would be authorized to tell you about any unannounced program. I'd suggest that if you were indeed talking to an Apple employee, you call back to that "senior advisor" and get full details on this purported program.
As it stands, the warranty on an iPhone is valid only in the country in which the iPhone was officially sold with the exception of the EU which is treated as a single country for warranty purposes.
Regards. -
Software Component does not support selected Development Component Type...
Hi,
I have a problem, i want create a new project of Mobile Service Component, but, when i want select MyComponents [demo.sap.com], in the top appear:
"Software Component does not support selected Development Component Type. Required DCs are located in an SC that is not visible from the selected SC "
Why?
Thanks in advance,
Regards,Hi Victor,
the issue is that the archive pool in your NWDS is not set up properly. Could you check the configuration of the development configuration? I guess you are developing in Local Development, right? Please check in the "Component Browser" that the two Software Components "NWMCLIENT" and "XOCA" are present and contain some DCs inside them. If this is not true, than something went wrong with your setup of the IDE. The modifications of the default.confdef are most likely not right.
Please come back to me if you don´t know how to proceed.
Regards,
Stefan -
When attempting to check and send email from my Mac via iCloud, I keep getting the error "Authentication failed because Outlook doesn't support any of the available authentication methods." I have change just about everything I can see available, but continue to get this message.
I am able to send email via iCloud using my .Me and .Mac adresses, and that tells me that it is not able to store "sent emails" on iCluud and will store them loaclly on my computer. I can handle this, but whem going to iCloud Web page haave nothing withing the "sent" mailbox.
Using OS 10.7.2, and Outlook 2011 version 14.1.3
Thanks in advance......I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server. -
Upgraded my computer to 10.9.2 Mavericks and now my 2011 outlook gives the following error: "Authentication failed because Outlook doesn't support any of the available authentication methods." Anybody know how to fix it? Thank you.
I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server. -
Revision: 13366
Revision: 13366
Author: [email protected]
Date: 2010-01-07 22:15:50 -0800 (Thu, 07 Jan 2010)
Log Message:
Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts. BatikFontManager will remain a backup in the event that AFEFontManager is not found though BatikFontManager;s support is limited to TTF for legacy DefineFont3 fonts.
QE notes: Remember that bitmap comparisons could change slightly
Doc notes: N/A
Bugs: N/A
Reviewer: For Gaurav
Tests run: checkintests, QE had run local tests
Is noteworthy for integration: Yes
Modified Paths:
flex/sdk/trunk/frameworks/flex-config.xmlI got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42) -
Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html
-
Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
that is the message how do i correct this problemIt sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X -
"...does not support this type of alias."
I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
Thank you in advance,
LloydBarry,
I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
Thanks,
Lloyd -
How to configure PlugAccts that use both balance and flow type source accounts?
In this application I am maintaining, there is a plugAcct that is account type liability. The source accounts for this plug account are revenue, expense, asset, and liability (approx 30 accts). The data in the source accounts balances perfectly by entity. That is, the credits exactly equal the debits in the source accounts, so the plug account should net to zero at the base entity level (value dimension = elimination). However, there is a balance in the plug account at the base entity level (value dimension member = elimination). What is happening is that when eliminations are calculated they are using periodic values for the flow type accounts. The balance in the plugAcct is equal to the prior months YTD total. So only the current month activity is being eliminated. I changed the account type for the plugAcct to revenue (from liability) and tried again. This did not resolve the problem. There is no custom consolidation logic in this application. The scenario is configured for YTD numbers (it is an Actuals scenario). Balances are always loaded YTD. And yes it is fully consolidated.
Any ideas?Set up your mac.com account again on devices. Turn off Mail and other data syncing with this account on your wife's devices for data that you want to keep separate. Then set up a second ("secondary") iCloud account on your wife's devices to sync Mail.
If you already set up a separate iCloud account on your wife's devices, on her devices go to Settings>iCloud, tap Delete Account, then sign back in your your mac.com ID. Turn on the data you want to share with this account across all devices; don't turn Mail on. Then go to Settings>Mail,Contacts,Calendars>Add Account>iCloud and enter her separate iCloud credentials and turn Mail to On.
The only downside to this approach is that her email will be fetch, not push email. Push email is only supported in the main ("primary") account, not a secondary account.
The limitations to be aware of with secondary accounts are that only the primary account can be used for Photo Stream, Bookmarks, Documents, iCloud Backup and Find My Device. Also, push mail only works for the primary account; secondary account mail is fetch. -
FWTR056 Error assigning update type to flow type 1200, sign -
Hi
we have defined a monymarket product type 530 ("Repo") with Transaction Type 200 (Liablity) and 100 (Asset). This works fine.
Now, the current market situation requires negative interests for Transaction Type 200:
Example:
First Cashflow: +1M
Final Repayment: -1M
Interest: +Interest (Sign!)
So, we get the interest Cashflow at the end.
I have assigned the Condition 1200 used for TransactionType 100 also to ConditionType 200.
After using FTR_CREATE for Producttype=530 and TransactionType=200, I can correctly choose between the 2 Conditions 1200 and 1205.
But: after choosing 1200, the cashflow is shown negativ (althow I have assigned Direction "+" when assigning flowtype to update type 1200)
Also: when I try to save the deal, I get "FWTR056: Error assigning update type to flow type 1120, sign +, contract type 5"
Any ideas how to solve this or to define negative interests? It really should be an interest cashflow, not an "other flow".
Regards, CornelHere the Response from SAP (in german): negative Interests are not possible (or only by using a workaround..)
04.08.2011 - 16:53:16 CET - Antwort von SAP
Sehr geehrte Damen und Herren,
im Standard ist die Berechnung mit negativen Zinsen aus technischen
Gründen nicht möglich.
Leider kann die Funktionalität nicht im Rahmen des Supports erweitert
werden, somit muss ich Sie mit Hinweis 11 vertrösten.
Eventuell könnten Sie es mit einem Workaround probieren:
1. Temporär die entsprechenden Positiv-Beträge für Zinsen
nutzen, aber die Kontierungen umdrehen (das wäre aber umständlich
und würde für Zinskapitalisierung nicht gehen),
2. oder die Geschäft mit einer variablen Zinsenreferenz anlegen und
dann die Konditionen für die betroffenen Perioden mit einem
passenden Abschlag (Spread) erzeugen,
3. oder eben negative Zinsen als Null-Zinsen erzeugen und für diese
Perioden Bewegungen manuell anlegen (als Zusatzbewegungen).
Ich kann Ihnen hier leider keine positivere Antwort geben.
Mit freundlichen Grüßen,
XY
FIN Senior Support Consultant
AGS Primary Support, Business Suite & Technology
SAP AG -
How to open a standard SAP fact sheet or any UI component ?
Using a support user, I want to open a BYD standard Fact Sheet of interest.
My goal is to see how certain fields are filled. I thought about adding a BO extension, and then editting the screen, but am slightly stuck.
Is there a way of opening a standard BYD screen (fact sheet) or any UI component ?
Thanks ahead for any tips.Hi Tom,
you need a PTP (Port Type Package), and to configure the outport.
If you want to understand how to configure do:
1) Create a custom BO
2) Generate all the screens for the custom BO of type Object-Based Navigation
3) Open the OWL and see what happen when the user click EDIT (the QA screen is opened through the PTP)
4) Open the QA and see how the QA understand that it needs to be opened when the PTP receive the notification -
SPRO Define My Messages Widgets Define Widget Component Usage / Custom MyIncidents*
Hello everybody,
I am trying to add a custom component usage into
Tx: SPRO > Define My Messages Widgets > Define Widget > Component Usage
like this
Is there an howto somewhere available for this that I can use it in the configuration of the start page widgets "my own messages / incidents":
Kind regards
Update:
In the meanwhile I found that BSP component AIC_HOME is including componentusages named like the standard component usages given in the customizing table under "Define Widget". So I guess I have to enhance the component by my own componentusage with a similar functionality.
I don't know if anyone will ever respond of any of my posts one day but here is
Update 2:
I am stuck now at that Component Usage. When I try to delegate OP SINGLESELECTION to DYN_NAV and visa versa it does not show me an entry to select from.
Update 3:
Well, I first had to add the view within Runtime-Rep. editor > ViewSets > Ov.Page <add< like the standard view of the "MyMessage..."-kind. Now I have all possible selections. Was this the final solution? .... tbc ...
Update 4:
At least in the UI configuration tool i can save now permanently based on one component usage:
BUT the filter which should come along with the component usage does not work.
Last update due to success and problem solution:
Finally there is a need for enhancing the AIC_HOME Component-Controller @
WD_USAGE_INITIALIZE
Just modify the code like this:
CASE iv_usage->usage_name.
WHEN 'ZMyMessageWidgetITTicket'.
cl_ai_crm_mymsg=>set_active_switches( iv_usage ).
cl_ai_crm_mymsg=>set_defaults( iv_usage ). " Reported By My Organization
WHEN 'MyMessagesReportedByMyOrg'.
cl_ai_crm_mymsg=>set_active_switches( iv_usage ).
cl_ai_crm_mymsg=>set_defaults( iv_usage ). " Reported By My Organization
Now your custom component and all stuff around that should work with all the filters and extra drop down buttons, etc..
Nice to see that I started with a big question mark around the component usage (unfortunately described as "Define Widget") and on my way to the finishing line I found out that I had to make myself a hole new assignment block.
Hint:
If you stumble over this error:
Exception-Klasse
CX_BSP_WD_INCORRECT_IMPLEMENT
Fehlername
Programm
CL_BSP_WD_OVW_VIEWSET=========CP
Include
CL_BSP_WD_OVW_VIEWSET=========CM00A
ABAP-Klasse
CL_BSP_WD_OVW_VIEWSET
Methode
BIND_LAZY
Zeile
27
Then you have forgotten to edit BSPWDV_EHSET_ASG via sm30. There you connect your enhancement-set (which you use to enhance AIC_HOME) to the client.Solved by myself..
Used the set_changed_by_client method of the IF_WD_CONTROLLER. -
For the last month or so, every time I download anything I get an error message stating "........could not open ...... .dmg because it is either not a supported file type or because the file has been damaged...." I do not know what to do to fix this issue. Any ideas?
hmmm.... try this
basic troubleshooting:
Repair Disk Permissions http://support.apple.com/kb/PH5821
Repair Disk http://support.apple.com/kb/ht1782
reset ACLs http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
Maybe you are looking for
-
I have migrated from Application server 10.1.3.1 to 10.1.3.5 by applying patches. After that i have tried to deploy a application, I got this error Operation failed with error: [resonance:resonance] - Exception creating EntityManagerFactory using Per
-
I recently started having my networked HP Office Jet printer begin flashing lights and displaying error code 0x887df78e. It seems to be related to the use of ITunes. The only information from HP is to remove the print cartriges, keep unplugging the p
-
Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording
-
Hi, Is it possible can we have a List with multiple Object (CustomerVO, OrderVO and AddressVO) in a single List? If so how we will define the generics for that List? Please clarify. Thanks.
-
How to learn java script in indesign
Dear Sir, I am a template designer, I am interesting on Indesign scripting but I don't know basic knowledge in software languages. So Please help me which languages i should learn for indesign scripting. (some of them saying C language is must). Is c