Any working WebServices tutorial?

I tried Sun's app server and tutorial, but it just doesn't work!
I kept having a 405 error when accessing my web service.
Could anyone advice me on a link to working example?

I figure it out!

Similar Messages

  • Is run WS_MANUAL_WEBI_AFTER_IMPORT harmful for correct working webservices?

    Hi guru's,
    After implementing HRSP's recently we had the error "Virtual interface not found" when accessing the endpoint.
    Fortunately we found the solution in the discussion groups of SCN; running the report WS_MANUAL_WEBI_AFTER_IMPORT.
    For the near future we want to prevent this "Virtual interface not found" error by default running the report WS_MANUAL_WEBI_AFTER_IMPORT after any upgrade/update on the SAP system.
    The point is however, that we do not know whether running this report will damage a correct working webservice.
    Please respond if you know whether this report  will, or will not, damage correct working webservices.
    Thanks in advance!
    Ab

    PrPro will come to you. It has fewer "automations," and "big-button" solutions, than PowerDirector (and Magix and PrE), but with that comes power!
    It is the same with Encore vs the limited authoring capabilities of PowerDirector, Magix, Roxio and PrE. Again, more hand-work, but oh, so much more power!
    Can you tell that I am a control freak, and do not mind getting my hands dirty to access the power?
    There are a few things that Encore cannot do, that programs like Sonic Scenarist can do, but there are usually workarounds, either in the design, or in the implementation, that will get you "there," or close.
    I strongly recommend that any new user to Encore purchase and read Jeff Bellune's excellent book, The Focal Easy Guide to Adobe EncoreDVD 2.0, Focal Press. That book covers everything that Encore can do, with two current exceptions - Adobe Dynamic Link (CS4 version) and BD authoring. Both of those were added after the book and EncoreDVD 2.0, were released. However, the Help files cover both of those newer additions well.
    Along with the fundamentals of Encore, Jeff covers all sorts of tricks and tips for getting more out of Encore, than the DVD-specs. actually allow. Obviously, he cannot break those rules, though he CAN help you create the illusion that the rules HAVE been broken. The user will swear that they just saw things, that are impossible, based on the DVD-specs., which are very limiting. Hey, it IS "smoke and mirrors," but if the user is fooled, you have succeeded, right?
    Good luck, and when you get around to adding some "tricks" to your DVD-Videos, post back. I'd suggest a new thread, so that other users can benefit from the new title, and so that users know that this is a new question. You will find that there is not too much, that someone here has not done, one way, or another. Oh, there ARE some limitations, where there is no good way to "bend" those DVD-specs., but you'll be surprised at what one can "bend."
    Happy authoring,
    Hunt

  • Where to find example code referenced in Java WebServices Tutorial, v1.5_01

    Java WebServices Tutorial, v1.5_01 refenced a lot of code examples, which are supposed to be in <JWSDP_HOME>/docs/tutorial/examples.
    I have downloaded and installed "Java Web Services Developer Pack v1.5" and "Java WebServices Tutorial, v1.5_01" from http://java.sun.com/webservices/downloads/webservicespack.html
    But none of these downloads includes the code examples.
    Thanks for any hitns.

    Thanks.
    But you were talking about a different set of examples referenced in a different document. You can get these examples when you install downloaded file:jwsdp-1_5-windows-i586.exe
    The code examples I am looking for are referenced in:
    "Java WebServices Tutorial, v1.5_01"
    and this document can be downloaded at:
    http://java.sun.com/webservices/downloads/webservicespack.html

  • Sun J2ee webservice tutorial doubt

    Hi,
    I am trying to understand how the JAX RPC static stub client is built in Sun Webservices tutorial
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/JAXRPC3.html
    Here we have HelloIF and HelloImpl classes. Both these classes are in the
    package helloservice.
    package helloservice;
    public interface HelloIF extends Remote {
    }These have been built using
        asant build, asant create-war, asant deploy-war commands.Now the client HelloClient.java is in package staticstub.
    package staticstub;
    import javax.xml.rpc.Stub;
    public class HelloClient {
    public static void main(String[] args) {
    HelloIF hello = (HelloIF)stub;
    }}I wanted to know how does HelloClient compile WITHOUT importing package helloservice in which HelloIF has been declared.
    Isn't this against the basic java rules.
    Or is there a smart way ANT does.
    Can someone please explain or give me a plain javac command to compile the HelloClient.java
    regards
    Vasim

    Hello,
    Could you post a stack trace?
    Thanks,
    Bruce
    zbcong wrote:
    >
    hello
    i want to deploy the jax-rpc sample that come with the sun's tutorial(hello) and
    can works well in the tomcat into wls7,but the wls tell me that some files can't
    be found,then i add enough jar files under the jwsdp to the lib directory of the
    war package till the deployment success,but when i invoke it in the browser,the
    browser tell me "no jax-rpc context available",why?and the same package even can't
    be deployed in the jboss,the jboss always complain that the "class not found",but
    i am sure the classes is included in the lib jar files,why?who can help me?
    thank you

  • Very URGENT:am not able to log in to my account on installation of OSX lion...tried to resolve this issue by calling apple support centre ,but was left in vain...am not able to access my documents nor do any work...plz help me resolve this issue asap...

    am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...

    My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
    This is entirely a carrier issue.  If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
    i feel i need to change my brand
    This is a user-to-user tech support forum, not Apple.  No one here cares at all about your threats.
    NEVER post personal info in this public forum

  • Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work.  I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close."

    Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work.  I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close." Need solution now.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Will i lose any work i have done if i stop using elements 6 and use 4

    i have elements 4 but am trying out a trial version of 6 i have edited some photos and also tagged them if i dont buy 6 and my trial finishes what will happen to any work i have done when i start using 4 again? also is there any video help on using 4 and 6 online i do read the help but i still get confused as what to do i would prefer to see it actually happen thankyou

    >also is there any video help on using 4 and 6 online i do read the help but i still get confused as what to do i would prefer to see it actually happen thankyou.
    I suggest that you look at
    http://graphicssoft.about.com/od/pselements/Photoshop_Elements_Tutorials_and_User_Resource s.htm
    where Sue Chastain has written multiple tutorials with screen shots and instructions. Now they may not be video format, but they do have the screen shots to show you the actions.
    >if i dont buy 6 and my trial finishes what will happen to any work i have done when i start using 4 again?
    In general - any photos that you have imported from your camera and the edited photo files will remain on your hard drive. However, many/most of the changes you have made in the Organizer work space will be lost.
    You will need to import the photo files done in v6 again once you switch back to v4: if you originally imported from your camera in v6, you would now import from the hard drive location after going back to v4. If you saved in a Version Set in v6, that version set will not exist in v4 - so you will have separate thumbnails for the original and the edited photo.
    It may be possible to keep some of the newly applied tags because PSE does sometimes write Tags to the photo file itself. I think that the Write Tags to File command still exists in v6.
    Hopefully someone who has done this fallback will post detailed information.

  • Has anyone done any work with the "Form" Email Feature in 2008?

    Has anyone done any work with the "Form" Email Feature in 2008?
    2006.7
    Oracle 9i
    Websphere 5.11
    IE6 & IE7
    I have been testing the version 2008.2 and noticed the "Form" link in the email templates, has anyone used this or know what its for? 
    It seems like a useful feature, but I can not find any documentation on its use.
    Thank you
    Daniel

    Hi Daniel,
    The HTML widget we have incorporated into the application is an open source tool. It's name is FCKeditor. Here is the URL for the documentation site: http://docs.fckeditor.net/
    - Ed

  • Excel allows array arithmetic (e.g. sum(a1:a5* b1:b5) where the contents of the cells are the results of formulae.  Numbers only allows constants in the array cells. Right?  Any work-arounds?

    Excel allows array arithmetic (e.g. sum{(a1:a5* b1:b5)} where the contents of the cells are the results of formulae.  Numbers only allows constants in the array cells. Right?  Any work-arounds?

    CJPerry wrote:
    Any work-arounds?
    There is a very simple one : use libreOffice.
    Yvan KOENIG (VALLAURIS, France) dimanche 1 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : http://public.me.com/koenigyvan
    Please : Search for questions similar to your own before submitting them to the community
    For iWork's applications dedicated to iOS, go to :
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • My MBA keeps shutting off every 5 minutes. what is happening? I can't do any work done because of it. :(

    My MBA keeps shutting off every 5 minutes. what is happening? I can't do any work done because of it.

    Same problem for me, it happened after 3 weeks.
    I had to call Apple, althrough they couldn't solve the problem by phone.
    Genius bar were full so they sent me to a local store.
    Looks like it has something to do with the graphic card. It occured when I plugged my macbook to my iMac for screen the 1st time
    11 days later I'm still waiting to get my macbook back. Hope you can get it faster!
    Very disapointed with the support quality and product quality.

  • I cannot save any work in photoshop

    I cannot save any work in photoshop please help

    Nobody can tell you anything without proper system info or other technical details like where you are trying to save in what format, what documents you work on etc..
    Mylenium

  • Macbook pro not saving any work when on shutdown or restart.

    Macbook Pro 13'' early 2011.
    i5, 4GB and 320 GB
    OS: Mac OS X 10.7.3
    System Pref version: 11.0
    Everytime I shutdown or restart it does not save any of the system prefernecs and not any work done in terms of text, coding in Eclipse I mean nothing. No matter what you do when you start mac again it shows you the system as it was on Saturday.
    This is very bad because spacially you rellay on your mac to work.
    Regards,
    Anshul Meena

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy – do not type – the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • MQ + OpenLdap: Any working example of LDAP configuration?

    MQ + OpenLdap: Any working example of [LDAP configuration], [LDIF initial data] and [imobjmgr addTopicFactory/addTopic command] files ?
    I'm using Sun MQ3.5 + OpenLdap2.2.20 as jndi remote binding mechanism.
    I've unsuccessfuly tryed to add a Topic Factory!
    Running the command
         imqobjmgr -i add_ldap_topic_factory.poperties
    I get such an exception:
         javax.naming.OperationNotSupportedException:
         [LDAP: error code 53 - no global superior knowledge];
         remaining name 'cn=myTopicConnectionFactory'
    This is the test configuration adopted using rootdn user to write to LDAP repository:
    #slapd.conf
    include /usr/local/etc/openldap/schema/core.schema
    database     bdb
    suffix          "dc=imq,dc=com"
    rootdn          "cn=Manager,dc=imq,dc=com"
    rootpw          secret
    directory     /usr/local/etc/openldap/var/openldap-data
    index     objectClass     eq
    #test.ldif
    dn: dc=imq,dc=com
    objectClass: dcObject
    objectClass: organization
    dc: imq
    o: imq
    #add_ldap_topic_factory.poperties
    version=2.0
    cmdtype=add
    obj.type=tf
    obj.lookupName=cn=myTopicConnectionFactory
    obj.attrs.imqAddressList=mq://localhost:7676/jms
    objstore.attrs.java.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory
    objstore.attrs.java.naming.provider.url=ldap://localhost:389/o=imq
    objstore.attrs.java.naming.security.principal=cn=Manager,dc=imq,dc=com
    objstore.attrs.java.naming.security.credentials=secret
    objstore.attrs.java.naming.security.authentication=simple
    Thanks for any suggestion,
    Silvano

    Agreed.
    I've been wanting to test the steps and write a tech article on this
    and post it to somewhere on sunsolve.sun.com but have not had
    time yet.
    In any case, the instructions Ken-shi gave are below including
    the 3 files (etang.ldif objectstore.properties slapd.conf). Not sure
    how messy this posting can get due to size of files.
    I'd much rather point you to a sunsolve article but don't want
    to make you wait. When I do post the sunsolve article, this thread
    will be updated with a ptr to it.
    ===Begin instructions===
    Attached please see my working configuation files.
    1.Modify your OpenLdap configuration. (see slapd.conf)
    start OpenLdap: ./slapd
    2.Modify you initial data.( see etang.ldif)
    load initial data: ldapadd -x -D "cn=Manager,dc=etang,dc=com" -W -f
    etang.ldif
    3.ObjectStore properties ( see objectstore.properties )
    create your object store with "Administration" GUI on windows;
    while creating destinations or connection factories, be sure that the
    lookup names start with "cn=".
    ===End instructions===
    ===Begin etang.ldif===
    dn: dc=etang,dc=com
    objectClass: dcObject
    objectClass: organization
    dc: etang
    o: Etang Corporation
    description: The etang corporation
    dn: cn=Manager,dc=etang,dc=com
    objectClass: organizationalRole
    cn: Manager
    description: Directory Manager
    dn: o=IMQ,dc=etang,dc=com
    objectClass: organization
    o: IMQ
    dn: ou=imqusers,o=IMQ,dc=etang,dc=com
    objectClass: organizationalUnit
    ou: imqusers
    dn: cn=admin,ou=imqusers,o=IMQ,dc=etang,dc=com
    objectClass: person
    cn: admin
    sn: admin
    userPassword: admin
    dn: cn=guest,ou=imqusers,o=IMQ,dc=etang,dc=com
    objectClass: person
    cn: guest
    sn: guest
    userPassword: guest
    ===End etang.ldif===
    ===Begin objectstore.properties===
    java.naming.provider.url ldap://10.1.0.195:389/o=IMQ,dc=etang,dc=com
    java.naming.factory.initial com.sun.jndi.ldap.LdapCtxFactory
    java.naming.security.principal cn=admin,ou=imqusers,o=IMQ,dc=etang,dc=com
    java.naming.security.authentication simple
    java.naming.security.credentials admin
    ===End objectstore.properties===
    ===Begin slapd.conf===
    # See slapd.conf(5) for details on configuration options.
    # This file should NOT be world readable.
    include          /usr/local/openldap/etc/schema/core.schema
    include /usr/local/openldap/etc/schema/cosine.schema
    include /usr/local/openldap/etc/schema/inetorgperson.schema
    include /usr/local/openldap/etc/schema/dyngroup.schema
    include /usr/local/openldap/etc/schema/java.schema
    include /usr/local/openldap/etc/schema/nis.schema
    include /usr/local/openldap/etc/schema/misc.schema
    # Define global ACLs to disable default read access.
    # Do not enable referrals until AFTER you have a working directory
    # service AND an understanding of referrals.
    #referral     ldap://root.openldap.org
    pidfile          /usr/local/openldap/var/run/slapd.pid
    argsfile     /usr/local/openldap/var/run/slapd.args
    # Load dynamic backend modules:
    # modulepath     /usr/local/openldap/libexec
    # moduleload     back_bdb.la
    # moduleload     back_ldap.la
    # moduleload     back_ldbm.la
    # moduleload     back_passwd.la
    # moduleload     back_shell.la
    # Sample security restrictions
    #     Require integrity protection (prevent hijacking)
    #     Require 112-bit (3DES or better) encryption for updates
    #     Require 63-bit encryption for simple bind
    # security ssf=1 update_ssf=112 simple_bind=64
    # Sample access control policy:
    #     Root DSE: allow anyone to read it
    #     Subschema (sub)entry DSE: allow anyone to read it
    #     Other DSEs:
    #          Allow self write access
    #          Allow authenticated users read access
    #          Allow anonymous users to authenticate
    #     Directives needed to implement policy:
    # access to dn.base="" by * read
    # access to dn.base="cn=Subschema" by * read
    # access to *
    #     by self write
    #     by users read
    #     by anonymous auth
    # if no access controls are present, the default policy
    # allows anyone and everyone to read anything but restricts
    # updates to rootdn. (e.g., "access to * by * read")
    # rootdn can always read and write EVERYTHING!
    access to * by * write
    # ldbm database definitions
    database     bdb
    suffix          "dc=etang,dc=com"
    rootdn          "cn=Manager,dc=etang,dc=com"
    # Cleartext passwords, especially for the rootdn, should
    # be avoid. See slappasswd(8) and slapd.conf(5) for details.
    # Use of strong authentication encouraged.
    rootpw          secret
    # The database directory MUST exist prior to running slapd AND
    # should only be accessible by the slapd and slap tools.
    # Mode 700 recommended.
    directory     /usr/local/openldap/var/openldap-data
    # Indices to maintain
    index     objectClass     eq
    ===End slapd.conf===

  • HT1531 netflix requires intel based, but I have a power PC (old power book G-4) are there any work arounds?

    I have an older Power book G-4 with 1.67 GHz powerPC G-4
    mac osX 10.5.8
    but cant get Netflix to work as they require an Intel based  to work
    Are theere any work arounds for this, as this used to work but Netflix requires an Intel based system now
    Help me?

    See if this helps.

  • Is there any working flash player?

    Hello all,
    Excuse me, but I'm getting really irrtated now.
    My (multiple) problems with adobe flash player started in june 2012 after I made the stupid decision to update it. If I get any version to work properly again I certainly will not touch it for the rest of my life.....
    My previous threads:
    http://forums.adobe.com/message/4881107#4881107 (Flash Player 11.3.300.257 Firefox Plugin multiple problems on both XP and Vista)
    http://forums.adobe.com/message/4882513#4882513 (Still hardware volume button fail after update to 11.4.402.278)
    No, my problems with Firefox and flash player haven't been solved. So I think, ok I'll use IE9 to view youtube vids, well that that doesn't work either?!? 
    Here's the list of issues which I face now:
    1. I can't use a new flash player version in Firefox because of the hardware volume bug in flash player (see thread above), So I have to use an older one.
    2. In Firefox youtube constantly freezes. It's like the video file won't load further. I have to use escape or refresh or whatever to get it to work again.
    3. In IE9 I can't use the full screen feature, the screen is all messed up and the vid won't work properly (it's not the hardware acceleration thingy).
    So summarized I have a flash player problem for over half a year now on 2 laptops with 2 differfent windows versions with 2 different browsers. That makes 4 options. And none of those work? Both laptops are recently fresh installed, clean and do not have much software on them.
    Laptop 1:
    Windows XP fully up to date
    IE9 with latest flash player
    FF latest with flash player 11.2.202.233
    Laptop 2:
    Windows Vista fully up to date
    IE9 with latest flash player
    FF latest with flash player 11.2.202.233
    So my question: Is there any working flash player? If yes please tell me, because I need one pronto.
    I hope there's one technician out there who knows enough about it, because till now no one did...
    ThaPlayah
    OK, so it seems I've killed the IE9 full screen bug by disabling the HTML5 trial option. In my eyes it would be better to leave that option disabled by default, because HTML5 isn't even here yet. Otherwise let people know they can untick that option! Anyhow the rest of my Firefox problems still remain, and I do prefer Firefox (read totally dislike IE9)

    Hi ThaPlaya,
    I feel your pain. I am in charge of over 250 PCs and laptops. Flash Player stopped working for me after an update. I have been working on this issue non-stop since the middle of October, 2012. It's time-consuming, and even after applying the latest Flash update, it still doesn't work properly.
    I am beyond frustrated! I have people calling me left and right saying that they can't access content. I have been using this site https://www.mozilla.org/en-US/plugincheck/ to try and do a browser plug-in check while in IE an dFirefox. Even after I update all plug-ins, Flash still works about half the time.
    For instance, the principal of the middle and high school wanted to view an online magazine http://upfront.scholastic.com/issues/12_10_12, about 3 pages load on this site. The rest continue to say LOADING. When I right-click on a page and then left-click on ABOUT ADOBE 11.5.502.110, it seems I am using the most up-to-date version for IE and Firefox.
    Students are trying to access sumdog.com and stmath.com, both run using Flash. STMath is now working a bit better because I allowed some exceptions in our internet content filtering appliance, and in our firewall, sumdog still works half the time.
    If Adobe is going to update their browser plug-ins, they need to test and retest before giving the public access. This situation is causing me a ton of problems!
    Sorry to infiltrate your post...
    Dawn/Flower1964

Maybe you are looking for