Anybody else using Logic, Reason, and Waves SSL.... with this issue?

got a major problem.
i got a session where it's mostly Logic Audio Inst and Reason Rewired Inst (going to individual Audio Inst tracks).
when i apply the Waves SSL EQ to a Rewired Inst under Live Mode (for Rewire Behavior), it works fine. but after adding a few more inst and plugz, 1 of the 4 processor (indicated in System Performance) maxes out. which is kind of f'd up because the other processors are almost hitting rock bottom.
so i go and change from Live Mode to Playback Mode. this way, the processor doesn't overload. the processors look like they're distributed more properly this way, tho there's always one that spikes higher than others.
problem is, when i go to Playback Mode, i get this weird bug. it actually sounds like a bug. seriously. it goes "blip blip bleeep, blip etc etc etc".
and the blips don't come in at a constant rate, it's at a random rate. but it's constantly there... does that make sense? in a way it sounds like a short bursts of feedback. very annoying, cuz you can hear it, and you can even see it on the fader meter of the Reason Inst. doesn't happen to all Reason Inst channels, in most cases just one.
the obvious work-around is to use a different EQ (other than Waves, cuz it'll do the same for Channel EQ as well). but this is just a band-aid, not really solving the problem.
so the issues are:
-Waves SSL and Rewire doesn't behave nicely together under Playback Mode, and gets weird "blip" feedbacks
-Logic and Rewire doesn't behave nicely together under Live Mode, where it maxes out only 1 of the 4 processors.
this also happened back when i was using a G5 also, same Logic 7.2.3/Reason 3.0.5/Waves SSL 1.2.
anybody else encounter a similar problem? i can provide more info if necessary.
i even talked to Propellerheads, but they haven't gotten around to buy Waves SSL, so can't recreate the same problem despite of me sending them the session files....
PLEASE HELP!!!

i even talked to Propellerheads, but they haven't gotten around to
buy Waves SSL, so can't recreate the same problem despite of me
sending them the session files....
I'm sure they'll have an iLok to install the demo to. It won't behave any differently from the full version, as it's just a different license. Maybe they were just fobbing you off?
As a workaround until it's sorted, can you export all the audio from Reason as regular audio so you don't have to use Reason?

Similar Messages

  • No Sound from Logic 8- can anyone help with this issue?...

    Hi,
    I am relatively new to Logic and have an issue as I work my way through the getting started book.
    I have no sound when I play any type of track...
    I have gone through the Apple website's Logic common issues page and have no issues with laptop and program compatibility and I have correctly installed my audio interface which is also fully compatible with the laptop I have.
    The setup I have is:
    - Macbook Pro 1, 2 with Mac OS X version 10. 6. 7 running Logic 8.
    - a Focusrite Saffire audio interface.
    Can anyone help shed any light onto this why I have no sound returning at me when I click pay track?
    Thanks for the thoughts you share!

    Somewhere in the Everything wrote:
    This has solved the issue and helped my understanding of the program. I didn't realise selecting core audio interface was responsible for output audio also. Though it seems obvious now, I think I overlooked this on that point of the journey I was on... thank you Pancenter
    You're welcome.
    I don't know your setup and this may not work for you, see what you think.
    I tend to keep the internal built-in audio as the core audio device for all of the Mac sounds including DVD playback... iTunes....etc. 
    I reserve the pro/semi-pro audio interface for use only with the professional audio application. There's a couple of reasons for this... the Mac built-in audio actually works better for some things like DVD playback, also.. core audio volume will now affect the Focusrite's volume.. I'd rather not have the volume of the pro interface or the sample rate messed with. I need to load my projects and have them play exactly as I saved them.
    Also, keep reading the manuals... there's much to learn there. The manuals will help train your mind for further understanding as you progress.
    Any type of knowledge a person gains by working things out on their own (as you did)  will stick with you. Even though you didn't find the solution you put in effort.
    The answers are never the important part of learning, the work put in is the actual answer.
    When I teach audio related classes.... for example, learning how a compressor works. I have a student pick one compressor and learn it inside and out. Use it for voice, guitar, drums, bass, synths. Using one plug-in, in depth gives one perspective and the basic knowledge of how to use other compressors one will need in the future.
    pancenter- 

  • Does anybody else use "Nonbreaking Space (Fixed Width)" for this?

    Does anyone else do this?
    Does anybody else use "Nonbreaking Space (Fixed Width)" for this?
    I add special "white spaces" of an unchanging width:
    Is there an easier way to "automate" this?  The way I do it is horrible ...  horribly bad

    I don't think you can automate exactly that, but you might be able to get spacing you like better in general if you reduce the word spacing range and increase the letter spacing range in your justification settings.

  • Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, Photoshop CC won't read the card drivers and says I need to reinstall them and disabled 3D funtions as a result. Anyone else with this issue?

       Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
    "Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
       I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
    OS 10.7.5
    Mac Pro 1,1
    20gb ram
    ATI Radeon HD 5770 Graphics Card
    30" Apple Cinema HD display

    after going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support

  • I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser

    I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser

    There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
    If you have trouble following those instructions, see below.
    Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
    The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
              com.something.daemon.plist
    and
               com.something.helper.plist
    Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
    If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
    /Library/LaunchAgents
    In this folder, there may be a file named
              com.something.agent.plist
    where the string something is the same as before.
    If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
    Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
    The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
    Open this folder:
    /Library/Application Support
    If it has a subfolder named just
               something
    where something is the same string you saw before, drag that subfolder to the Trash and close the window.
    Don't delete the "Application Support" folder or anything else inside it.
    Finally, in this folder:
    /System/Library/Frameworks
    there may an item named exactly
                v.framework
    It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
    Don't delete the "Frameworks" folder or anything else inside it.
    If you didn't find the files or you're not sure about the identification, post what you found.
    If in doubt, or if you have no backups, change nothing at all.
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Iam using iphone 4s and Iphone 5s with same apple ID but my network is different and whenever Iam getting call in i5s and in my both handset same calls are coming. Please provide me solutions

    Iam using iphone 4s and Iphone 5s with same apple ID but my network is different and whenever Iam getting call in i5s and in my both handset same calls are coming. Please provide me solutions

    On both devices, go to Settings>Facetime and turn off cellular calls.
    ~Lyssa

  • Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both

    Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both. Want to give one to wife.do I need to open a new iTunes account for her?

    bashepard wrote:
    Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both.
    Yes, No problem at all.
    Want to give one to wife.do I need to open a new iTunes account for her?
    No - you can share the same iTunes account (my wife and I share the same account). But when you sync the iPads, just remember to select the correct content for her iPad and the correct content for your iPad.

  • I am using Logic Pro 8, I interface with a firepod, got a new firestudio project, but I can only access 10 tracks at a time to record enable, anyone?

    I know the two interfaces have synced, but I just can't seem to pull up more than 10 tracks in the input channel drop down. If any one has any idea , I would love to hear about it.

    CCTM, Hello my friend, I wanted to thank you for your support with this issue, Your screen shots, and the tricks and tips book I have helped me set up the aggregate device, I now have 20 inputs and 20 outputs as it should be.
    Thank you again, respectfully Eric King.
    P.S. As I work my way through the two Logic Pro 8 series books from apple, I am sure I will have more questions, hope to speak with you again. Have a wonderful day .

  • I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    Hello zukafu, 
    Welcome to the forums. 
    In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB03621
    Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
    Thank you
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ?

    My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.

    shahzadfromlahore wrote:
    Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
    Who set up the phone? Who's Apple ID was used to activate it?

  • My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

    My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.  
    Can not load the Organizer from the icon at the bottom of  Editor screen, from the icon on the MacBook Air dock (OS 10.10.2),  nor from the file in applications located with Finder.
    I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences.  I have searched on line for other options but not  found any. 
    Can you help me?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I'm trying to play a purchased DVD movie using a superdrive and apple tv with a projector - i just get a checkerboard pattern?  Help - 18 students are frustrated

    I'm trying to play a purchased DVD movie using a superdrive and apple tv with a projector - i just get a checkerboard pattern?  Help - 18 students are frustrated

    I'm afraid this is by design.
    You cannot Airplay Mirror a DVD using DVD Player - Apple block  screen mirroring of certain image data which might be protected.
    I've a funny feeling Airplay mirroring can potentially be interecpted and decoded so someone could potentially copy the video stream (which would be poorer than DVD anyway).
    Try VLC Player:
    VideoLAN - Official page for VLC media player, the Open Source ...

  • In Iphoto 11 all 7000 of my photos show the same thumbnail.  I rebuilt the thumbnail using ctr alt and opening iPhoto. This worked and rebuilt the thumbnails correctly. Then when I reopened iPhoto the problem came back? Help please?

    In Iphoto 11 all 7000 of my photos show the same thumbnail.  I rebuilt the thumbnail using ctr alt and opening iPhoto. This worked and rebuilt the thumbnails correctly. Then when I reopened iPhoto the problem came back? Help please?

    Where is your Library stored?

  • ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated with this subscription.

    Im trying to connect to my azure subscription via powershell on my machine but keep getting the following error when i run a command:
    ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated  with this subscription.
    The steps i have taken so far are:
    1. get settings file
    Get-AzurePublishSettingsFile
    2. Import settings file
    Import-AzurePublishSettingsFile -PublishSettingsFile "C:\Users\me\Downloads\credentials.publishsettings"
    3. I then run Get-Azuresubscription with the following output:
    SubscriptionId : 699385c3-b83a-44af-a651-bxxxxxxxxx
    SubscriptionName : Windows Azure MSDN - Visual Studio Premium
    Environment : AzureCloud
    SupportedModes : AzureServiceManagement
    DefaultAccount : 3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4
    Accounts : {3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4, 26B118D7F3C598FB8FE9CDC49AB5DE5E450C967C,
    03E1E1F0B8C7717F11FB58A14138C35524AB3F8D, 9A2E1FD267ECCC0E9B8C151BD931FC4824E89184...}
    IsDefault : True
    IsCurrent : True
    CurrentStorageAccountName :
    TenantId :
    I run Get-AzureAccount and get the following:
    Id Type Subscriptions Tenants
    3B68902B5170D5EC91BFCBE4CC27E2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    A8838F61C4
    26B118D7F3C598FB8FE9CDC49AB5DE Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    5E450C967C
    03E1E1F0B8C7717F11FB58A14138C3 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    5524AB3F8D
    9A2E1FD267ECCC0E9B8C151BD931FC Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    4824E89184
    85AD02CB8EB8AB20CF2C44FD9D19F2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    9B6BB2FCD2
    Finally, when i try to run Get-AzureSQLDatabaseServer, to list my databases, i get this error:
    WARNING: Client Session Id: '5911f288-7b02-4c94-bb9d-37b9ea5fc187-2015-01-13 11:47:54Z'
    WARNING: Client Request Id: '3e5f7ea9-092a-46fd-a6a6-6916b9161b77-2015-01-13 15:25:41Z'
    Get-AzureSqlDatabaseServer : ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated
    with this subscription.
    At line:2 char:1
    + Get-AzureSqlDatabaseServer
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [Get-AzureSqlDatabaseServer], CloudException
    + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Server.Cmdlet.GetAzureSqlDatabaseServer
    I would appreciate any help in figuring out what i am doing wrong here.
    Thanks,

    OK. That won't work in Azure Automation though, as mentioned above. OrgID (recommended) or cert-based auth will need to be used. PublishSettings file won't work.
    Correct, but the original question was:
    <Quote>
    Im trying to connect to my azure subscription
    via powershell on my machine 
    </Quote>
    I wanted to test automation script's core functionality without having to wait for the very very long time taken for an automation runbook
    to spin up, actually run and provide output (can often take 2+ minutes for a trivial script). Although i cant run Workbooks on my pc, i can run the core modules (view virtual machines, databases etc) to ensure my logic is sound.

  • After 10.10.3 update I can no longer right click. Anyone else with this issue?

    After updating to the latest software I am unable to right click on my magic mouse like before. Now I have to use control and click. Anyone else with this issue?

    Did you check the settings in Mouse preferences?
    Download and install the OS X Yosemite 10.10.3 Combo Update.

Maybe you are looking for

  • I need help... Not a huge Dreamweaver User

    I hope this makes sense! Bear with me... I'm not a big Dreamweaver user. I purchased custom Social Media Icons to put on my website in the footer. I thought I could possibly stumble my way through the code in Dreamweaver and do this myself. Any help

  • SCA project with webservices binding is failing in WLS 12.1.2.0

    While I am able to successfully  deploy a SCA project with an EJB binding in it, application is failing (deploying ok, but not recognized as an SCA app) if I include a webservices binding in it. Apparently SCAContainer is failing to locate a class fi

  • Sender's Complete Address in Mail's InBox

    Hello everyone - I have Mail 1.3.11 running with my OSX 10.3.9. Is there any way to have Mail display the senders' complete addresses (ie: [email protected]) in its InBox rather than just their short names (ie: Joe) before opening that mail? Many tim

  • Moving songs in my libary

    I have a lot of songs already on my computer from cds. I noticed when I added them some songs when into their own album by themselves when it is from the same cd. Is there anyway i can combine these songs onto one album then to have 10 different song

  • RFx Response - How to get answers from questions

    Hey, I would like to know how to get the answers from questions ( by IAPI or table where they are stored ) and if i can manipulate them. Thanks!