Anybody ever seen a black fiber between the front glass and the actual screen?

I seem to have one. It certainly won't come off with any method I know of it and seems to be between the top layer of glass and the screen itself. Brand new display from an authorized retailer.

I felt the way you do. It is not cheap and should be perfect. When I returned it to the Apple store they did not even look at it. They just gave me another one.

Similar Messages

My camera on snapchat works but only the front.. and my actual camera doesnt?

my camera on snapchat works but only the front.. and my actual camera doesnt?

Have you tried closing the Camera app via the multitasking bar and seeing if it works properley when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Camera app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How do reduce the space between the front panel and the display area

I am trying to reduce the space between the front panel and display area but i am not able to reduce the space

A picture would be very helpful in demonstrating what you are having trouble with.
Lacking that, I will guess.
VI Properties >>> Windows Size
lets you define the minimum size of a FP window.
Well that's my guess!
Did I win?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Monitor issue - dirt behind the front glass

I use a pair of LP2475w Monitors for photography. The monitors both have gotten very dirty on the inside between the front glass and the LCP panel. Is there an easy way to open this up to clean and if so how. Thanks

Dan, welcome to the forum.
Here is what it states in the Manual for the monitors:
Do not open the monitor cabinet or attempt to se
rvice this product yourself. Adjust only those
controls that are covered in the operating instru
ctions. If the monitor is not operating properly or
has been dropped or damaged, contact an author
ized HP dealer, reseller,
or service provider.
You will find this warning on P.11 of the manual in the link that I provided.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Is it possible to have the front panel on the iPad 2 replaced with a different color?

I have a WiFi-3G verizon 64GB BLACK iPad 2, when I bought it, black looked the best at the time. but now, it seems that white looks ALOT better and actually makes the screen look bigger . I was wondering if it was possible that if the front glass (not the LCD) can be replaced with a white one. As far as i can see, all of the connections and clips SHOULD clip into place just like the black panel. there should be no problem. the only problem i could see is that the apple store will refuse to install it because of some bullsh** reason. If that happens, i will buy the panel, then go to iFixit or something like that and see if they will take my money. So if anyone can shed some light on my situation, that would be GREAT. THANKS

my step mother got an ipad against my advice to wait for the new ones and she got a white one, and seeing how clean, pure, open and free the white one seemed compared to my black one, which (athough i polish habitually) look sad, dark, grimy and "trapped", i wanted to get the panel swapped. i thought i could maybe pull off an "oh crap i 'accidentaly' dropped my ipad and the screen broke" but that seemed utterly useless as they would just replace it with a black one.

Gap between plastic front panel and metal band

hello, i have noticed a gap between the front plastic and the metal band when taking the iphone off a case. theres a 1mm gap between the plastic and metal, and 3 small cracks along the edge of the plastic, 2 at the top and 1 at the right side. the gap is at the top of the phone from the power button to the edge. the front glass doesnt fit perfectly anymore because the top end of the plastic is raised whilst the rest is flat.
how do i get it repaired?
thx

This damage is to the front screen assembly. This is handled at Apple Store with perfect Replacement iPhone 4 exactly like yours for $149. Maybe much care, skill and very small, less than drop of super glue, will correct this.

Lync 2013 Enterprise load balancing on the front end and edge pool

Hi,
I am setting up a Lync 2013 Enterprise deployment consisting of a Front End pool (x2 FE servers) and an Edge pool (x2 Edge servers). I'm seeing some conflicting advice regarding load balancing using hardware or DNS for the front end and the edge.
On the front end I have 2 internal DNS records 'lyncfepool1.contoso.local' each of which map to one of the IPs of the FE servers. I've used my details to populate the Detailed Design Planner excel spreadsheet and am told that I require a HLB to load
balance my front end pool. I'm aware of the need to load balance HTTPS traffic internally (which will be done by TMG) however other traffic to the front end (SIP, etc) can be balanced by DNS only, and not require a HLB?
Can someone clarify the front end requirement?
Also - looking now at the edge pool - this site again have two edge servers in a pool. We are using a total of six private IP addresses, two per edge service (2 x av.contoso.com, 2 x sip.contoso.com and 2 x webcon.contoso.com). These will be
NAT'ed by the external firewall and directed to the respective external (DMZ) IP addresses on the Edge servers on port 443. I know this isn't true roundrobin due to the intelligence of the Lync client when connecting (in that the Lync client will connect
to one of the public IPs and if it can't connect, it will know to connect to the other service IP), however I want to clarify this set up, particularly the need to direct the external public IP traffic at the DMZ Edge IP specified in the topology builder.
I've attached a basic diagram of the external/DMZ/Edge side which hopefully helps with this question
Persevere, Persevere, Per..

That is because you will always need HLB for a front-end server since it hosts the Lync webservices which use HTTP/HTTPS traffic.
The description on the calculation tool also describes this correctly:
Supports Standard and Enterprise pools (up to 12 nodes), with pure device-based load balancing or a combination of DNS load balancing and device-based load balancing (for
Lync web services)
You can use either Hardware or DNS loadbalancing for SIP traffic only, but you will always need a HLB for the webservices. Both are applicable for the Front-End so you have either
full HLB for both SIP and HTTP(S) traffic
DNS LB for SIP traffic and HLB for HTTP(S) traffic
Hope this is more clear :-)
Lync Server MVP | MCITP Lync Server 2010 | If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.

How can you tell if you need to just replace the glass on an ipod 4g or the glass and the LCD screen?

i just broke my ipod touch 4g about a month ago and i think it is just the glass but i am not sure. It cracked and the glass started falling out of the top right corner and today, the white part started cracking. is this just part of the glass or is it part of the LCD screen? I want to figure this out because i dont want to order a repair kit with an LCD screen if i dont have to. thanks in advanced

On the 4G the outer glass and the LCD screen is one bonded unit.
iPod Touch Repair – iFixit

Last week I dropped my new iphone and smashed the front glass, I made an appointment at the Apple Store in Phila., and they treated me like royalty. The store replaced my phone with a brand new one as a one time courtesy, thank you Apple and your store i

Thank you Apple store in Philadelphia for your royal service! I dropped my new iphone and damaged the front glass, and it was replaced with a new phone as a one time courtesy. I am enamoured with their courtesy and kind service there. The trip to the Philadelphia store was a pleasing experience. A big thank you to all the fine rep's at that location....thank you!

Bee , you are so right that most people only post when things go wrong not right. Which made me think about the Apple Store in Charleston, SC. I have never had a bad experience and besides buying my iMac there (which was a really good experience as it took us several trips to decide and they were really helpful) I have had a number of 1:1's and I think one trip to the genius bar which resulted in a new mouse. Everyone I have dealt with there has been respectful and helpful. At least with those visits you do get a chance to provide feedback.
Nice to post these kinds of comments now and then too.
laverne's mom

IPhone 5 screen is flickering randomly, the phone freezes and the screen turns black.

I bought an iPhone 5 in New York last December. Now I live in Bogotá, Colombia and I can't find an authorized service center because they said that only if I bought it from a local carrier they attend the warranty.
My iPhone 5 screen is flickering randomly, the phone freezes and the screen turns black… The only way to make it work is to reboot with Home and Lock buttons pressed at the same time. But in the process most of the times it flickers again, and again, and again. I couldn't find a reason to identify what could be causing the issue. Also sometimes when it freezes, some group applications get ungrouped, causing a big mess.
I already tried to restore the phone, remove the SIM, delete all applications with no luck.
Any sugestion? Thanks!

Was this phone ever jalbroken?
If restoring as new, without using a backup, didn't help, there is certainly a hardware problem that only replacement can fix. Your warranty is void unless you return to the USA. Short of that, finding a local independent iPhone repair center would be your only option

Black bar along the right side and the bottom of the screen- DV5-1007ca

I have DV5 1007ca running Vista Home Premium 32-bit.My computer seems to suddenly think my monitor is a different size. I have a 3-inch black bar down the right side of the screen and about a 1/4 inch black bar along the bottom. My windows are still fully functional and completely fill the portion of the screen that is active. There is no loss of image, it's just framed by the black bars. If I do a Print screen and paste it into a document, the black bars are not there. It's as if the computer thinks the screen is a different physical size. This situation is present all the time, even when starting up. This is what I have done so far: -adjusted screen resolution settings = no change-rolled back my display drivers = no change-re-updated my display drivers = no change-rolled back my BIOS = no change-re-updated my BIOS = no change-System recovery = no change I searched posts here and elsewhere but the results were inconclusive. A couple of posters reported a virtually identical problem and were told they needed to replace either their screens or their graphics cards. Unfortunately, none of those posters ever reported back so it was unclear whether or not the issue was resolved. I doubt it is the screen since screen problem symptoms usually involve bits of screen not working and parts of the display being lost. My screen seems to be working fine, it just thinks it's smaller than it is. The graphics card is highly suspect. What's funny is that a little while ago, I started up my computer without changing anything and all was well for about a week and then it went back to the same old issue. Any helpful advice would be appreciated. This issue is driving me nuts!

I found a real solution that is hardware related. I was given a laptop with this exact same problem for free since my friend thought it wasn't worth paying to repair a 3 year old laptop, and was dead for almost a year (I think they manufactured these in 2008, but HP has almost no specs or info about them, specially ours; DV5T-1100) I have the solution to this problem, and is a solution not found almost anywhere using Google, and HP support doesn't want to tell you, simply don't know, or would make them look bad. I was able to fix it myself by using a rework station (basically a dedicated hot air gun) that I used to "reflow" the graphics chipset's connection to the board (keep reading, because this method may vary on result details). This simply means that I opened the laptop, removed the copper heatsink connected to the fan to expose both the micro-processor, and the faulty graphics chipset, and started cutting soda cans, or thick tin foil to cover the areas AROUND the graphics chipset, and leave the graphics chipset exposed so that the really hot air would concentrate only on TOP of the graphics chipset. Then, I put the device on 220 degress, with the tip of the gun 2 inches over the chipset, and circled the gun around heating that sucker for 5 minutes, then I did a 3 minute rest to cool off, and a final 5 minutes reheat again. Luckily enough it WORKED!, and it has been working for almost 10 months with heavy use. HOWEVER... doing a "reflow" like this on a micro component isn't reallt a proper fix. Sure you may get lucky, and I read of instances where the fix lasted for years, but also just months. This is because the problem is the old solder that connects each "ball" point under the chip to the motherboard may have a micro ultra tiny imperfections and misconnections on a few or many of the connected points cause by a long period of overheat of the chip due to both, a very bad heatsink, and heatflow of heat inside the laptop, and also (and usually) really bad maintenance on the user's part by having a really dirty and dusty vents, overuse, and blocking the ventilation exhaust of the laptop itself over time. A proper fix of this chip issue is another process called "reballing", where they actually properly overheat that particular chipset so much using IR heat, and an expensive machine, to "loosen" the solder of all connections and remove the chip itself to both, clean the old solder on the chip, and the old solder left on the motherboard, and actually REPLACE all solder with new lead solder. However, this process has to be very precise (hence the machine), and it maybe costly, and there's also the fact that MANY scammers out there either never really do a true reballing, ans just do a reflow to scam you, or don't have the experience to do a proper reball of the chip. So whose at fault here? Uneducated users that neglect learning how to properly maintain a laptop off its main enemies (dust and heat) no matter how good the hardware heatsinks may be, or is it poor hardware design by the manufacturer, where other brands or even other families of series off the same brand have actually better noticeable hardware design than these DV series that are so notorious to overheat easier than others out there? Well, I don't know, but I do know that you should be VERY careful having these laptops repaired and be scammed, because hey! Even so called "refurbished" or even so called "brand new" entire motherboard out there on Ebay are just bad reflow jobs with little to no warranty on them on purpose, to only last a few months on purpose. So, watch out, and THINK! before spending money on a beat up poor donkey.

Ipod nano 4th generation switches between the Apple logo and the menu

I have a 4th generation 8 g iPod Nano that probably has about 1 hour of use since my wife won it in a raffle over a year ago. When I went to recharge it yesterday, the only thing that happens is that the display, when connected to the computer, flips back and forth between the Apple logo and the menu screen. Whenever either one of them appears, it will disappear in a few seconds, then repeat the sequence. I have done a reset and restore,and installed the latest software version but the same thing happens over and over again. If the iPod is detached from the computer, ie, its power source, NOTHING happens on the display. It black and you can't get it to show anything. My theory was that the battery needed to be replaced even though it wasn't used much in the year since she got it. In fact. the absence of use and recharging it and discharging it may have lead to this problem in the first place. However, my one issue with that theory is that, when connected to a power source, like the computer, I would think I could get it to function normally, which I can't. I was able to get to the "service menu" which won't disappear when I move about different choices, as long as its connected to the computer. Again I can get nothing if its not connected to a power source.. does anyone think that this problem could be solved by replacing the battery or does it seem like that is only part of the problem? Thanks for any help and suggestions you may have to offer.
Geoff

Despite the Nano only being used for an hour or so, the battery needed to be replaced= problem solved!!

What is the difference between the iPod Touch and the iPod Touch MP3 ?

What is the difference between the iPod Touch and the iPod Touch MP3 ?

There is no iPod touch designated as the "iPod Touch MP3". If you've seen that listed somewhere, it's just a rather misleading title given by the dealer or web site, not an Apple product name.
Regards.

Difference between the subledger amount and the expense amount

Hi everybody
I am using PPAC Cost method to book OPM transactions to subledger, the subledger update process is generating RCA postings related to GL Expense cost components at average cost (Batch Certify subevent). This is resulting in a difference between the subledger amount and the expense amount. It is required to generate RCA postings based on allocated expense amount and not based on the average cost.
Did u face such problem before ? can anybody help me ?
Thank You and Best Regards

Hi
Mmd.
The difference between the subledger amount and the expense amount MUST be adjusted using Adjustment form
Navigation: Finanacial-->Cost Management--> Actual Costing-->Adjustment
where u can see the Actual Cost adjustments form and u can adjust the diff.
hope this is cleat to u.
Raj
HYD

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

Anybody ever seen a black fiber between the front glass and the actual screen?

Similar Messages

Maybe you are looking for