Anybody experiencing static when using Advanced Calling?

Since activating Advanced Calling, I hear static behind the callers voice, the caller says they can hear my clearly. So I went ahead an disabled Advanced Calling because of this.
Anyone else experiencing similar issues using Advanced Calling?

Yes, on one call today I could hear just the faintest static that I have never heard before.  The other calls I made since upgrading seem fine or it wasn't quiet enough to hear it. 

Similar Messages

  • I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions?

    I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions? Which wireless headphones work best with the apple TV?

    Ok so I've been doing more testing. It's all videos on the iTunes store. Anytime I try to download a podcast or stream it or anything it's super slow. To download an episode of Diggnation it tells me over 2 hours to download but the time keeps climbing and I just stop the transfer.
    Some people said it's an Open DNS thing? Maybe it is but it's not computer specific and I couldn't find a way to change the DNS settings in my Airport, only on each computer. I tried deleting PLists and restoring my Apple TV and restoring my Airport and nothing is working.
    I don't know if it an issue with me, my ISP or Apple. Anyone else experiencing this problem?

  • How to transfer range parameter from vb when using bapi calling

    Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

    Did you get the solution to your problem?  Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

  • Siri does not work when used for calling a contact function

    Siri does not work when used for calling a contact function

    Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
    If it continues try to restore it.

  • When is Advanced Calling going to be available on the Moto X 2nd Gen

    When is Advanced Calling going to be available?  The lack of simultaneous voice and data is getting irritating.

        zimmatore Great news! Advanced calling is already available for a wide variety of devices. The Moto X is expected to have the advanced calling feature with a future software update. Which software version is installed on the device?
    SheritaH_VZW
    Follow us on Twitter
    @VZWSupport

  • ASK : Skype Force Close when using Voice Call

    dear all
    how to fix skype force close when using voice call.?
    please help me.
    i have tried reinstall skype.
    thx before.

    From the top of my head, install Thinkpad Communications Utility
    and within it is an option called "Optimize my microphone for". Try
    switching it to "Normal use" instead "Only my voice". Also, in Windows
    Control Panel there should be an icon for "Realtek HD Sound Effect
    Manager". Fire it up and goto "Microphone" and try switching between
    the two options. Maybe that'll help too, but am not sure.
    T530: i7-3630QM, 4 GB DDR3-1600, NVS 5400M, 2x 500GB 7200RPM, 9-cell, HD+ 1600x900, Backlit US, WinXP Pro
    L430: i3-2370M, 4 GB DDR3-1600, HD 3000, 320GB 7200RPM, 6-cell, HD 1366 x 768, Win7 Home Premium 64-bit

  • File sharing setup causing static when using Itunes

    We have 2 ibook g4's, and use an airport express to play music on our creature speakers. It's worked great up till now. We setup file sharing on both laptops ... and ever since we only get static when we try playing music in itunes.
    You can hear the music, but it's very faint under the static
    Speakers work fine when used with our dvd player etc
    Have turned off file sharing with no change
    Rebooted both machines
    We both use the latest itunes & osx vers
    Any help would be greatly appreciated!!
    cheers
    FF
    ibook g4 Mac OS X (10.4.8)
    ibook g4   Mac OS X (10.4.8)  

    appears itunes is not the culprit, as I've used airtunes with other apps with the same result. will repost this under another category.

  • I am experiencing problems when using the calendar minimonth function which causes the operation to freeze up.

    I have, for a couple of months now, experienced a freeze up, and the firefox not responsive when using a date search box like when trying to pick a date for getting a hotel room or booking a rental car. I noticed that I had a message box that had been coming up telling me about unresponsive script detailing something like chrome/calendar/minimonth. I could not find that in my computer anywhere. It happens with ie as well. Any thoughts? This is driving me crazy.

    Klaus,
    Thanks although you didn't know the answer somebody out there did and I cannot believe how simple the issue was - assign a name to the computer through System Preferences>Sharing
    excellent result, it's really nice to stop banging my head against that brick wall
    Stuart Mcf

  • Skype keeps quitting when using Skype call to another computer while using

    This does not happen when using to pc's but when I use my Macbook Pro to call back home to my Desktop PC in Taiwan it never fails to disconnect after a few minutes of talk. Anyone else having these problems with Skype quitting when on a VOIP cal from computer to computer. My Skype is the latest verison.

    Hi there stylineexpat,
    I have the exact same issue here with my MBP & 10.5.x.. About 10.. 15 mins or less into the call my mbp drops the call..
    Interestingly enough, my MacPro running 10.4.11 NEVER drops a call to the same people and the same network. I mean .. never drops em.. I have been using Skype for roughly 3 years and haven't had issue until this machine and another MBP I had that was running 10.5 as well.
    I agree, It is a pain.
    I'll look to the Skype user forums too.
    Cheers, ML

  • Errors when using the Call statement for MS SQL Server

    I've tried executing a Stored Procedure using the Call method of Portal 2 Go. But it gets an internal error b/c of it. Any Ideas why and how to resolve?

    Hello,
    Which version of SAP BOBJ XI3.1 you are using?
    What I am aware is BEGIN_SQL was very well working for SQLServer2005 in case of ODBC connection.
    Can you try one thing for SQLServer2008 have a Native driver installed on your client machine and use ODBC connection rather than OLEDB connection.
    If that works fine, its good
    Otherwise you can raise a message for resolving this problem with the support team.
    Thanks,
    Vivek

  • Keypad blinks when used during call. Anyone know how to stop it?

    Like most phones, the screen goes dark and input is stopped when you hold the phone against your head when making a call. Take the phone away from your head, and it comes back on.
    With the Moto X, all this works, but when I'm dealing with an automated system, such as Verizon billing or support, when I go to press a key, the keypad blanks out, and the number isn't sent. It's like the phone thinks my hand is a head. It makes it almost impossible to "press 1 for English", and it's the biggest flaw I've found in the phone, other than absence of MHL.
    I note that our new Samsung Galaxy Note 3 doesn't have this problem, and you can turn off the display blanking feature in Display setup. Is there a configuration switch somewhere that helps with this problem on the Moto X?

        Cascode,
    That is a very good question. When you are trying to press a number on the key pad while a phone call is going on is your hand going over the sensors on the top of the phone? If it is, that could trigger the phone screen to shut itself off. Keep us posted.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • I am experiencing a memory leak when using ajax calls, only in Firefox 4.

    I have been developing an intranet application that uses jquery's ajax function to refresh certain parts of a page. I have tested this application in Firefox 4, IE9 and Chrome 11 on a Windows 7 64-bit machine.
    Only Firefox is seeing an increase in memory usage, leading me to believe there may be an issue with how Firefox is handling these types of calls.
    I have been investigating this issue for two solid days now and have come across solutions to similar issues for slightly different configurations, but none have solved the problem I am experiencing.
    The software and versions I have been using are:
    Windows 7 64-bit
    Firefox 4.0.1
    jQuery 1.6.1
    Any assistance or even a clarification that the issue exists would be helpful.

    The behaviour you describe is strange. Something to try: Open a refernce to the file one time before entering the loop, then inside the loop use that reference to do all the writing. Finally close the reference when the loop completes.If this doesn't work, post your code in 6.0 format and I'll be glad to look at it.Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Left speaker on MacBook Pro is static when using FaceTime?

    When I either receive or place a FaceTime call on my MacBook Pro, the left speaker cuts out audio and produces high static.  The right speaker is fine.  The receiving end can also hear the static feedback, but their two speakers work fine.  I have all my iOS devices setup to receive and place FaceTime calls (iPhone 5s, iPad, and MacBook Pro 15 inch late 2011).  If I place or receive the FaceTime calls on my iPhone or iPad, there is no problem. 
    I've tested the speakers, youtube, iTunes audio, streaming websites, netflix, etc... and all works fine on the MacBook Pro.  Just FaceTime.  I also went into system preferences and the speaker setup is correct (audio in and out - internal speakers).
    I've also restarted, reinstalled Yosemite...still FaceTime left speaker problem.
    I appreciate any troubleshooting advice and/or if others have experienced this problem.
    Thanks!

    Take it in for replacement.  In time, the annoyance will become intolerable.
    Ciao.

  • Vista dies when using Advanced Dock with Nvidia graphics card

    I installed a Nvidia Gefore 8600GT video card in my advanced docking station but when i dock my laptop it freezes and has to be hard booted off the dock in order to work again. Do I have to use the ATI X1300 card?

    The Advanced Dock only supports the ATI X1300 card and with XP. 
    with only these models of ThinkPads:
    The ThinkPad Advanced Dock (2503-10U) supports the 256MB ATI Radeon X1300 Dual-VGA or Dual-DVI, TV-out PCI-Express Graphics Adapter with the following ThinkPad system configurations:
    T60, T60p (type 1951, 1952, 1953, 1954, 2007, 2008, 2613, 2623) with Windows XP only
    T60, T60p Widescreen (type 6369, 6370, 6371, 6372, 6373, 6374, 8741, 8742, 8743, 8744, 8745) with Windows XP only
    Z61e, Z61p, Z61m (type 0672, 0673, 0674, 9450, 9451, 9452, 9453) with Windows XP only
    Z61t (type 9440, 9441, 9442, 9443, 9448) with Windows XP only

  • Serious audio static when using display or FireWire

    I've got a strange issue with my Core Duo Mini (1.66GHz). When plugged in to my stereo using an RCA Y-splitter from RadioShack, there is static bad enough to drown out all the audio. This happens with any combination of audio cables I use, but does not happen with other computers plugged into the same outlets, or with headphones or portable, self-powered speakers.
    So far I've survived using an AirPort Express, but decided that I've had enough of fiddling with audio delays in VLC when watching DVDs and tonight rewired everything. The buzz is still there.
    What I inadvertently discovered is that if I leave my display (Apple 21" Studio CRT) and two FireWire hard drives unplugged, the static disappears.
    I'm considering the purchase of a USB audio out device (such as the iMic), but would rather not spend more money on this.
    Thanks for any insights!
    Mac Mini Core Duo 1.66GHz   Mac OS X (10.4.7)   1GB RAM, 80GB internal HD, 160GB FireWire HD, 600GB FireWire HD, Alesis IO|2, Apple Studio 21" CRT,

    I've been having a similar problem where I'd get a low buzzing sound going to my self-powered speakers. After doing some research, I found that I'm just getting electrical interference from one of the devices in the chain. So the only solution for me was to get a Ground Loop Isolator which basically grounds the electrical interference in the wires before going to your stereo.
    http://www.xitel.com/product_gli.htm
    There are much cheaper versions at radioshack.com as well.
    I hope that helps.

Maybe you are looking for