Anybody found a way to flatten iweb pages??

take a look at my site...
www.shaineparr.com
each time a new page is opened up the images(which are the same on all the pages) have to load again.
does anyone know if there is a way to get iweb to look for images in one folder instead of each page having its own images to load? essentially to "flatten" the page?
i used to use dreamweaver and if you used the same image twice on a site it would only load the image once, sharing the same image between two pages. then when you open the next page the image is already cached and loads instantly.
in my opinion this looks much more professional.

HI Shaine,
Nice music
Another program I use called Contribute allows you to use an image on your computer or in your web space.
If your site is hosted on your .mac web space:
Try selecting your photo on the home page and go to Insert>choose>navigate to your idisk and then to the folder where the image is stored and choose that image. Do that for each additional page, making sure you choose the same image.
Another thought:
If you use iWeb and publish to a folder. Navigate to that folder and choose the same image of you each time to insert into each page.
or (this involves starting over from the Home page.)
duplicate the Home page, change your elements, etc. for the current page you are doing.
do this for each page.
I would think that it would be using the same image of you each time if done this way.
Message was edited by: lori_diloreto

Similar Messages

After installing Lion, iMovie09 no longer sees my Canon AVCHD. It finds photos. Anybody found a way to fix this?

After installing Lion, iMovie09 no longer sees my Canon AVCHD. It finds photos. Anybody found a way to fix this?

Is that with the camera directly connected or with the card in a card reader?
I haven't tried in a while, but I know it worked in Lion at some point. I did all my uploading with a card reader, so that may be the difference.

Is there a way to duplicate a page?

I was wondering if anybody has found a way to duplicate a page. For example, I have a photo page that I have tweeked a bit from the original template, and rather than make the same tweeks each time I add another photo page I would rather just duplicate the page and add new content. Any advice is appreciated, thanks.
If you want to look at the site for a better understanding check out http://www.j4creative.com
Thanks again

I think iWeb doesn't yet have this ability.

Is it possible to widen the page view when drafting iWeb pages?

I'm drafting web pages via iWeb and figured out how to make the page content wider (in page layout/content width), but would like to be able to have a view of the entire page while I'm rearranging the text and images on the webpage. I cannot figure out how to be able to view the page without having to scroll left and right. Is it possible to see what the finished product looks like in its entirety before and/or after publishing to iWeb???

iLyzzard wrote:
Seems like my iMac with a 21.5 monitor should do the job. The webpages look great online, but how can I widen my draft-view so I don't have to keep guessing as to alignment of my text and images? Please advise.
I'm not really understanding your question since the way things look in iWeb is pretty much the way they look online.
In what way do your iWeb pages not look like what you see online?
This is really a feature in iWeb (and one which costs iWeb excessive code if anything): to be able to provide a WYSIWYG canvas on which to build.

Is there a way to flatten pages in Acrobat XI

Is there a way to Flatten pages in Acrobat Standard XI. In Standard 9 I used a script called flatten.js and it worked fine. I read it will not work with XI. Any alternatives?

Gilad,
Thanks for the reply, but I still can't seem to get this to work. Let me expand on what I was doing previously and maybe you can tell me what I am doing wrong now. Previously in Adobe Pro X when we had documents that we needed to sent to a client, we ran the Flatten Form Fields and Comments action script. This worked wonderfully until we upgraded to XI, now it appears to be broken as we can still edit the text using the "Content Editing" option from Tools even though it was suppose to be Flattened.
I have tried many other options: Flatten Comments and Annontations action script, another JS script that I found for Flattening (but it was old from 2008), and also tried doing the Javascript Debugger method and using the this.flattenPages(); command which returneds undefined when I press Ctrl + Enter. All of these the result in that I can continue to edit the text after the script/command is ran.
Am I missing something on how to lock down the PDFs now in XI or maybe I have a setting wrong that is blocking Javascript? I am hoping I am just making a mistake somewhere and the origional functionality we used in X is not gone.
Thank you for your time regarding this matter.

Is there a way to open an iWeb page in 'new' window?

I'm trying to show a client how to run iWeb so he can tweak his own site on the road. He doesn't know html. I don't want to have to write out a complicated list of instructions for him.
Is there a way IN iWeb to have an iWeb page open as a 'new' window?
He's a songwriter ... wants visitors to be able to open a song and have it play while they continue to browse his site.
thanks
b

Ben:
When you create a text link to an file you can set it to open in another window by setting it up as an external page checking the appropriate checkbox in the Inspector/Link pane. . You would have to upload the file to the Music folder on the iDisk beforehand and then use the following URL:
http://homepage.mac.com/youraccount_name/.Music/FileName
Note the dot before Music in the URL. Don't forget it. See the link titled *"This sentence is linked to a jpg file."* in this demo page. It's linked to a photo but the principle is the same.
OT

Help! I reinstalled my Mac and erased my iWeb page in the program.Its published, is there any way to download the pages from Mobile Me?

Help! I reinstalled my Mac and erased my iWeb page in the program.Its published, is there any way to download the pages from Mobile Me?

To download your pages from MobileMe simply mount your iDisk.
Then navigate to the Web > Sites folder where the pages are.
You can't do anything with them however, since iWeb cannot import them. But it's nice to know that you can download them.
You need the domain.sites2 files, iWeb uses to store its assets. Perhaps you have a backup?
See this page for pictures and movies to learn how to use the domain file :
https://discussions.apple.com/thread/3862332?tstart=0

Has anybody found a fix to The document could not be printed and There were no pages selected to print error

Has anybody found a fix to "The document could not be printed" and "There were no pages selected to print" error?
I am using a Mac and I'm running the latest versions of OS X 10.6.8 and Adobe 11.0.10 but I'm unable to print. I need REAL HELP not a suggestion or a get around! and NO print as an image doesn't work, nor do I see that as a fix!
Please help!

Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working.

Is ther an "easy way" to rename my iweb pages?

Here is my dilema
I have a iweb site hosted on go daddy so I have to update via an FTP which as you know each time to re-publish to your folder it creates a new time stamp and MOST ftp clients then reupload the entire site...
Well I fould this prorgram called "webecho" thanks to James Steng
and I "finally" figured out that indeed it works just like updating to .mac change 1 image on 1 page >publish to folder> update and it only uploads that one image cool huh?
Here is the drawback you can't have any spaces in your page names so instead of a page called "About Me" you have to name it "AboutMe" (no space between "about & Me" which of course looks foolish in your navigation pane
So my question is this
Is ther an "easy way" to name your pages wihtout spaces ~BUT~ still have spaces in the navigation pane?
Thanks in advance!
and
Happy New Yerar to all the great folks in this group!
Jim

This gets very convoluted very quickly, but there actually is a way to eliminate spaces in your filenames and keep the spaces in the navigation menu...
There is another handy utility called "iWeb FTP Utility" that is available here:
http://www.brokenropesoftware.com/iWebFTPUtility
This is a command line tool that will strip out the spaces in your filenames AND alter the HTML references to these files to reflect the new "spaceless" names. There's no easier way of doing this.
So your workflow then becomes:
1. Design and "Publish to Folder" with iWeb
2. Run iWeb FTP utility against the published sitefolder
3. Upload to your server with WebEcho or similar FTP.
Since iWeb FTP Utility only changes the filenames and references after publishing, the navigation menu images never get touched and will still display the names with spaces!

Any way to turn an iWeb page into a Pages page?

I'm just finishing up an iWeb site and want to send the basic layout and images to a friend via a Pages project file. He doesn't know iWeb (and doesn't want to), but he is familiar with Pages.
Is there any way to convert an iWeb document to a Pages document, or even just one page? Everything is in 'pixels' in iWeb, and Pages doesn't seem to have a 'pixels' function. Otherwise I'd just create a similar background in Pages and copy everything over. Don't want to have to figure out conversions of pixels to inches, points, or picas.

Determine the width and height in pixels of your iWeb page.
Divide by 72 to get the width and height in inches,
To get centimeters, multiply the number in inches by 2,54.
Create a custom page size in Page setup in Pages (Or any application).
Use the numbers in inches or in centimeters.
Add a blank page in Pages.
Choose the newly created pagesize.
Set the zooming of Pages to 100%.
You now have a identical page size.
Then copy paste all objects from iWeb to Pages.
I do the reverse. I create a webpage in Pages and then copy/paste everything to iWeb.

Is there any way to delete a page listing on the top of the IWeb site. I created a page which has links to the other pages, so I don't need all of them listed on top...

Is there any way to delete a page listing on the top of the IWeb site. I created a page which has links to the other pages, so I don't need all of them listed on top...

Better ask in the iWeb forum.
Answer : inspector > first icon from the left > uncheck 'Display navigation menu'
For future reference, also look at the other icons.

Can you work on the same iweb page on 2 different computers?

hi, i usually work on my imac doing my iweb pages, i would like to work on a second ibook that is in the house. i've tried and tried but can't find a way for the ibook one to pick up the pages. it has the same .mac idisk folder as the other mac with the iweb backup but won't start up with the iweb pages, the iweb starts up blank asking for its first page.
is there a way?
thanks

Chuck thanks, I found I can do it from that post, all you need to do is copy the iweb main folder to a USB mini, then I replace the iWeb folder in the next machine... it works great, you just have to remember to update it when you leave one machine and add the update to the next.

How to publish an iCal calendar into an iWeb page?

I want to include an iCal calendar in an iWeb page. I know this should be VERY straightforward but can't figure it out. How do I accomplish this?
Brian

I'm having a problem getting the iCal to publish to iWeb, so that I can have a calendar on my website with rss feed for new dates. So I put in my mobile me account name, and I do have several calendars, but there's nothing that looks like I can specify which calendar. Please don't tell me that I have to use one calendar, because I don't want my personal with my court, my court with my work, my work with my kids etc. is there a way to maintain the "public" calendar. I'm confused.
Assuming this is doable, I did try the widget, but i keep getting an error message that page not found, we're sorry but we cannot find the ical you requested, its possible that it has been deleted or renamed.

When I send a link to my iweb page it doesn't open

If I want to send a link of my iweb page to someone, the way I do it is firstly open the page online, copy the link from the browsers address and then from mail I goto "add hyperlink" paste the link in and then send, all looks ok, but when the other person tries to open, the link will not.
I sent to myself to test and found that the link address once sent this way from mail, is different than the original. Where the original address would be %20 it is now %2520. The number 25 is placed in front of 20 numerous times through out the link and so of course the site won't open.
Would hugely appreciate any feedback,
thanks
torder

I decided to edit my post and add some more info but I guess I took too long. So here's an edited version:
Idea 1 - the simple method: Forget the "add hyperlink" part. Just paste the address into your email message by hand. It comes out as a hyperlink (though it does not appear so when you are crafting the message) and does not create the problem you are having.
Idea 2 - the prettier method: Use "add hyperlink" but do some editing first. When you paste the hyperlink into the box you must replace each "%20" with a space. The link will be displayed in your email message as you would like it to appear - with spaces instead of %20's - but the underlying link will have the %20's. I can't guarantee it will come out pretty with every email program and every preference setting someone might use but any good program should get it right.

Embedded simpleviewer gallery in iWeb page

I've been doing a lot of research looking up on different sites and I've come up with a battle plan. I want to embed a simpleviewer gallery into my iweb page. Right now, I have a gallery set to open up in a separate window, and it's working fine. I'd either like to hide the address bar or embed the simpleviewer gallery right into the page, so instead of just the gallery opening up in its own webpage, the new page would include the rest of my links, and images. I think that an html snippet is the way to go, but I don't know how to obtain all the proper html to make it work. Does anybody know how to get it? iWeb's help section for html snippets is ironically incredibly unhelpful.
Here's a link to the gallery as it is now.
http://web.mac.com/soncraig/Cami&_Stevesv/index.html
I guess I should mention that I've seen it done before, I'm not just making something up. Here's a link to an autoviewer gallery that I've seen, and it's embedded into the iWeb page.
http://www.rowan-cottage.co.uk/Site/Teacher.html

Okay, here's some code that you provided for a flash video.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="309" height="206" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab #version=8,0,0,0">
<param name="src" value="http://web.mac.com/wyodor/_Flash/anpplayer.swf?file=http://eclogite.geo. umass.edu/funstuff/flash/Mixotricha.flv&autoStart=true" />
<param name="autoplay" value="true" />
<param name="loop" value="false" />
<param name="controller" value="false" />
<param name="kioskmode" value="false" />
<param name="cache" value="true" />
<param name="scale" value="tofit" />
<object type="application/x-shockwave-flash" data="http://web.mac.com/wyodor/_Flash/anpplayer.swf?file=http://eclogite.geo.u mass.edu/funstuff/flash/Mixotricha.flv&autoStart=true" width="309" height="206">
<param name="autoplay" value="true" />
<param name="loop" value="false" />
<param name="controller" value="false" />
<param name="kioskmode" value="false" />
<param name="cache" value="true" />
<param name="scale" value="tofit" />
</object>
</object>
Here's a link to my gallery,
http://web.mac.com/soncraig/Cami&_Stevesv/index.html
and here's a link to the rough page that I made for it
http://web.mac.com/soncraig/CraigSalmond_Photography/About2.html
Exactly which parts do I need to edit? I have a basic understanding of html, but I don't know how to link the gallery files to my iWeb page. Also, the Simpleviewer code doesn't look anything like some people say it should. For example, http://www.rowan-cottage.co.uk/Site/SimpleViewer.html
Is this page not accurate? Is it dealing with an earlier version of Simpleviewer?

Anybody found a way to flatten iweb pages??

Similar Messages

Maybe you are looking for