ANYBODY GETTING ANY RESPONSE FROM THE MODERATORS?

Hopefully the subject line asks the question.
I see lots of users trying to help other users......BUT WHERE IS THE "OFFICIAL" HELP?

take on board what you say about Sky.
still have trouble after 18 months getting SkyGo onto Tab 2.
Their moderators limp along saying "it's on the roadmap, bla bla bla" but nothing after 18 months...Seriously!
I'm getting de ja vu.
I would at least expect some intervention or help or advice (practical please...not the call centres...not emailing bt care....don't get replies.
I wouldn't want this forum to be just a place to sound off...Expect some help from your peers but DEFINITELY NEED OFFICIAL HELP IN RESOLVING ISSUES
my message to them is....don't be as customer offensive as Sky.... BELIEVE IN BETTER

Similar Messages

Can't get any response from the Tuner - is it broken?

I'm happily chugging away through my new David Nahmani tutorials and I've discovered that I can get no response from the Tuner. The controls in the window appear to be working, but no line appears in the meter and flat lines appear in the center for pitch and octave. The channel strip indicates normal sound input and variation. I don't have any trouble recording (so far anyway). Is there anything I'm not aware of that could cause this?

Thanks for the reply, Rob. I'm just trying to tune a wind instrument through the built-in mic on my MacBook Pro, but I discovered the answer not too long after submitting the question. As I said, I'm trying to work through the Nahmani Logic Pro and Logic Express 8 book. I've been trying to be very meticulous about the installation and the setup for the tutorials, but I guess I inadvertently made settings changes that interfered with the Tuner, because choosing Logic Express > Preferences > Initialize All Except Key Commands allowed the Tuner to work the way I expected. I assumed the problem must have been bus related after I saw the Tuner respond to internal playback after modifying some bus settings, so I executed that command and all was well (uh, I should probably change that to "most was well", but at least the Tuner is working now). Thanks again.

Can't get any response from HttpsURLConnection

sorry, i've reformat the code here again
Deal frens,
Currently i'm doing a code to get a response from https link in my servlet. I don't know where the lack of my coding, but i don't get any response from the server when i execute my code. here is my code
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.net.ssl.*;
public class Servlet1 extends HttpServlet {
private static final String CONTENT_TYPE = "text/html";
//Initialize global variables
public void init() throws ServletException {
//Process the HTTP Get request
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
    response.setContentType(CONTENT_TYPE);
    PrintWriter out = response.getWriter();
    String authentURL = "https://server1.tst.cvs/servlet/RequestHandler?login=admin&pwd=admin&method=viewUser&username=00032a0183db";
    out.println("<html>");
    out.println("<head><title>Servlet1</title></head>");
    URL url = new URL(authentURL);
    HttpsURLConnection URLconn = (HttpsURLConnection) url.openConnection();
   // HttpsURLConnection conn = null;
    URLconn.setDoInput(true);
    URLconn.setDoOutput(true);
    URLconn.setRequestMethod("GET");
    URLconn.setUseCaches(false);
    OutputStream authOut = URLconn.getOutputStream();
    BufferedReader reader = new BufferedReader(new InputStreamReader(URLconn.getInputStream()));
    out.println("<body bgcolor=\"#ffffff\">");
    out.println("<p>The servlet has received a GET. This is the reply.</p>");
    out.println("output"+authOut);
    out.println("output2"+URLconn.getContent().toString());
    out.println("output3"+reader);
    out.println("</body></html>");
//Clean up resources
public void destroy() {
} the result suppose i get when i execute the script is..
userdata=234&uname=00032a0183db&concurrentlogins=1
i don't have any problem when i paste the link
https://server1.tst.cvs/servlet/RequestHandler?login=admin&pwd=admin&method=viewUser&username=00032a0183db
and i able to get the response
userdata=234&uname=00032a0183db&concurrentlogins=1
please..please help..what is wrong with my code

YOU DON'T READ ANYTHING IN YOUR CURRENT CODE !!!
If you use a BufferedReader, then read the input stream via readLine() method.
Default implementation of getContent() method is not generally usable for getting your desired "content". Experiment that.

On my Iphone 4, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. help?

On my Iphone 4s, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. A few days before that the speaker suddenly stopped working during a call. I also reset everything by connecting to itunes but no luck then. help?

Hey there xntricj,
It sounds like you are putting a password for your Apple ID that works without issue on your iPad into your iPhone but get a message saying that the password is incorrect. I recommend the steps from the article named:
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
After completing iOS 7 setup, go to Settings > iCloud.
Scroll down and tap Delete Account, then enter your previous Apple ID and password.
If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
Thank you for using Apple Support Communities.
All the very best,
Sterling

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

Windows 7 ffox 1.6.16 installed office 2010 intimated cannot open link outlook firefox default browser, firefox will not initiate at all. Have to restart to get any response from firefox which then works but it crashes again. No error message

Windows 7, firefox 1.6.16 just installed office 2010, sometimes cannot open a link in outlook and firefox is my default browser, and firefox will not initiate at all. Have to restart computer to get any response which then works but after a while it crashes again. Was this due to an update or office 2010 has a hidden setting somewhere? Why would firefox crash without any message? Intimated consuming

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

HT1551 Apple TV searches for date and time settings, then the screen goes completely black and I get no response from the remote. Any suggestions?

I've moved to Sweden from Canada, and when I plug my Apple TV in, I get the LED light and the Apple logo, followed by the Setting Date and Time message. After that, everything goes black and I can't make any selections. The LED lgiht is still on however.
Any help would be appreciated.

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

How to get a response from the support group ?

I`ve been trying to get help to actually download Adobe elements.
When I put in my details for purchase - the system says "system error". I phoned the support group and was told that the charge on my card had gone through and they were waiting for a response from me.
I queried "what response"and since then - nothing !
Not happy.... and this has now been going on two days and multiple entries to customer care....
I`m open to ideas - either I can download it, or cancel the transaction.

Many thanks - yes I tried that and I`m getting no response to any of the customer care queries I put in.
They took 5 hours to respond to the "chat" by which time I`d gone to do something else.
I`ll keep trying them.
Thanks for your help.

Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.) I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

Downloaded your operating manual. It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection). The picture on page13 seems to be the clearest I could find:
Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
Note, if that truly is a 3.5 mm stereo jack cables are very common. In your case it would just be a cable with a 3.5 mm jack on each end.
Update:
You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?). The manual is not clear on this (page 31). Sometimes it just comes down to pushing buttons.

It kept bugging me so I upgraded to ITunes 10.4.1. Now I can't get any sound from the internal speakers or my headphones. Any ideas?

I'm using a Macmini with Snow Leopard. Everything is up-to-date according to the software updates manager. Can I go back to the previous version? I work from home and have very noisy neighbors so my music allows me to stay focused. Thanks for any suggestions.

Two suggestions:
1. Check iTunes volume (the slider left of the progress bar). It's separate from the system volume.
2. Often, speaker problems can be resolved by resetting your computer's PRAM. This explains how: Resetting your Mac's PRAM and NVRAM, http://support.apple.com/kb/ht1379

I am trying to utilize the Saphir modview over TCP. I get a response from the processor, but i do not ge the data from the register %MW10

I am new to modbus. I do not understand why the data i receive back using the Saphir toolkit is not bringing the data back that i am looking for. Any suggestions?

I would email Olivier Jourdan about that - NI didn't write that toolkit.
Jesse Dennis
Design Engineer
Erdos Miller

TS1630 My iPhone 4 says the headphones are in when they are not. I am not getting any sound from the speaker. Nothing appears to be in the headphone jack. Any ideas anyone?

My iPhone 4S has no sound through the speaker generally, although the speakerphone does work. It is indicating that headphones are in, when they are not. Nothing appears to be in the headphone jack. Resetting the phone has not resolved the problem. any ideas what could be wrong?

This just happened to my brand new iPhone5. I tried turning all the way off and then on AND plugging and unplugging. Only to discover that simply connecting to the charger worked!!!
Very frustrating though!!

When will I get a response from the Customer Support Portal?

It's been nealy a whole month and nothing!!!!!! You state a 4 hour turnaround, this is clearly a lie. See the following:
https://www.adobe.com/cfusion/support/index.cfm?event=casedetail&id=0184875846&loc=en_gb

Besides checking the support status assuming you filed the case with your Apple ID, there is nothing more you can do. Nobody here knows that as nobody here works for Apple. We are users like you. Apple does not monitor this forum. You will have to contact Apple support for the information if you cannot get it the way I described.

HT4061 my phone is locked and is asking for a 4 digit code that I don't have. I cant get any info from the phone because it is locked. HELP

my phone is locked and is asking for a 4digit code. I have not idea what that would be. I have entered every thing I can thing of and nothing works. Please help.

If you are unable to remember your code you will need to restore the iPhone. Take a look at this link, http://support.apple.com/kb/HT1212

ANYBODY GETTING ANY RESPONSE FROM THE MODERATORS?

Similar Messages

Maybe you are looking for