Anybody got experience with Hitachi Deskstar 7K750?

Hi,
I'm finally about to get my iMac a bigger harddrive. I've been looking at Seagate's 750gb drive, but i read Anandtech's review of Hitachi's 7k1000 harddrive and as far as i understood they were quite positive about it. After looking into 7K1000 i noticed that they also have the 7K750, which is 750GB.
I was wondering if anybody knows or has any experiences with this 7K750 harddrive?
If anybody has insights or experiences of the other above mentioned harddrive i'd gladly hear from you. Which would you get and why?
Thanks for your help!
CC
iMac 20" Core 2 Duo 2.16 Ghz 2 Gb Ram ATI X1600 256MB Mac OS X (10.4.9)

When you have spamassassin of os x server already running it is simple to upgrade spamassassin. I never had any problems - tested on three tiger - mailservers.
Simply follow the instructions on http://svn.apache.org/repos/asf/spamassassin/branches/3.1/INSTALL and upgrade on 3.1.3 (it reports itself as 3.001003) using the terminal and the perl-helper-app MCPAN .
When doing this the first time you may respond to the questions asked, but you can also choose you are not ready for a manual configuration. This does not interfere with amavis, clamav or anything else.
Worst thing that could happen is that you need to install the most recent perl-libraries on which spamassassin is dependent on...

Similar Messages

Anyone got experience with LabView and JTAG ?

Anyone got experience with LabView and JTAG ?
Especially in system programming of Altera and FLASH

Yes, I've actually driven JTAG using DIO, but this was a project in itself.
I guess you're just wanting to get the job done! I'm currently evaluating
gear to do the same job myself, in addition to interconnect testing. I've
been looking at JTAG Technologies equipment. They do PCI/PXI cards and the
SW, with a LabVIEW interface.
They're at:
www.jtag.com
You'll need to be sitting down when you get their quote though - their development
system costs about the same as a decent car!
Cheers
-Sean.
[email protected] wrote:
>Anyone got experience with LabView and JTAG ? >Especially in system programming
of Altera and FLASH

Anyone got experience with Filemaker and Mac OSX v10.4 on a G5

I am in the transition period from PPC to Intel, and installation of Aperture. My main box is an Apple G5 DP running OSX 10.3.9 and I have the upgrade software to go to OS 10.4+ but have not yet installed it. I also have a recent Intel MacBook Pro running 10.4.9.
Problem I'm experiencing is not unusual. If I run the current OS I cant run Aperture in the G5. If I upgrade the OS I suspect I will 'leave behind' some of the other software I rely on.
My query is about one main piece of software I use - Filemaker Pro 5.5 which runs a database I created handling my analog image collection, client info, deliveries and invoices, accounts etc. It works cleanly and quickly and allows great flexiblity in preparing material for output.
I downloaded the trial of Filemaker Pro 9 and it didn't like my old database when I tried to import it into the Intel laptop, and many functions seemed to have gone awol in the conversion to the newer software.
I cant experiment with this in the G5 as Filemaker is a key management tool in my work and any complications I need to overcome will impact seriously on my work.
So my question is - anyone got any experience with Filemaker in G5's - if I go to OSX10.4 upwards on this non-Intel machine will Filemaker V5.5 still run? And if not, are there any ways around this - eg using Classic environment?

*"I go to OSX10.4 upwards on this non-Intel machine will Filemaker V5.5 still run?"*
Yes

Refurbished iMac...anybody have experience with quality level?

I am considering buying a new machine and buying a refurbished product to save a few bucks. Has anybody out there had experience with the level of quality on these machines? Thanks!

Welcome to the discussions!
While I do not have a refurbished iMac, my BlackBook is a refurb and has been performing very well since I bought it back at the end of June.
It came in the plain brown box, but everything arrived in flaweless condition and it even smelled new.
Since it comes with the same one year warranty that a new unit does and you still have the option to extend that to three years with AppleCare, they are a great deal.
Bmer has a friend that received a bend MacBook Pro (or maybe it was a PowerBook) that Apple promptly arranged for a repalcement, but that is the exception rather than the rule. By and large you will receive a unit that is every bit as good as a new one, but save money.
Another thing to mention is that some users report receiving upgrades at no additional charge. Apple advertises the base configuaration and then ships out that they have in stock. That may mean extra RAM or a larger hard drive, but do not count on it. For that reason, I sugest waiting to receive your MB before ordering any upgrades.

VigiMac, anybody any experience with it? Or other theft software?

Hi, does anybody have any experience with the VigiMac software. It reports it location to a server and you can use this if your MBP is stolen to catch the thief.
http://www.vigimac.com/

wjosten wrote:
I use this, free:
http://preyproject.com/
thanks

Anybody Got Experience Getting ASA to Work With Comcast IPv6?

I'd like to enable dual stack IP with my ISP, Comcast. Unfortunately, Comcast requires residential CPE equipment to support DHCPv6-PD, which the ASA doesn't do. On Comcast forums, others have posted that the workaround is to place a router supporting DHCPv6 between the cable modem and the ASA.
My question is, given that scenario, I assume the ASA can get the information it needs to configure its outside interface from the router's RA messages? I'm a newbie when it comes to IPv6, so I'd appreciate any help or pointers to information on setting up my ASA correctly for IPv6 behind a router.
Thanks very much!
Sent from Cisco Technical Support iPad App

#1 What is the brand and model of the router?
#2 What software firewall is on your computer?
#3 What is your OS and version?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

ANybody have experience with EVENT 20/20bas studio monitors?

I am looking at a mint condition pair of these monitors. I am wondering what anyone has to say about them. Worth seriously looking at? Best I can ascertain is these sell for around $900? They may be a year or two old, so the current model might be an upgrade from these. Any advice would be appreciated.

Unless you absolutely CANNOT do without monitors right now, if all you can spend is $500/pair, I'd wait.
It has been my experience that for $500, you can get a nice upgrade from monitoring on stereo speakers. And yes, there are some good deals in that range (the KRK RP5s aren't bad, neither are the Yorkville YSM1s).
BUT...
...you get SOOO much more from a $1000/pair set like the Dynaudio BM5A. The improvement in stereo imaging and sonic detail is really massive.
My opinion (for what it's worth) is that monitors are one of a very few areas in which you cannot afford to skimp. Microphones and preamps are two others. Converters? There's always going to be a better set coming out tomorrow. But a U47 into a Neve will always be a U47 into a Neve. Basically, if its analog, its based on physics, and you can't improve the laws of physics. A good mic, pre, or monitor will last you for 20 years or more.
So, if you NEED the monitors now, I'd recommend the KRK RP5 (or RP6 if you need a bigger woofer, but the RP5s sound nicer) or the Yorkville YSM1s.
Otherwise, save your pennies for something you can grow with .

Does anybody have experiences with a Samsung SSD 840 Evo for a MacBook Pro?

I heard that the Samsung SSDs 840 Basic and Pro have problems with MacBook Pros and die after a few weeks. I bought my MacBook Pro 13 in April 2011 and want to upgrade it with a SSD now.

Partitioning makes no sense. You have a drawer full of stuff. Split it into two smaller drawers and you have two smaller drawers full of stuff.
Decide what you can store on external storage - your iPhoto/Aperture/Lightroom libraries can all be stored on externals, as can your iTunes Libraries and so on. Do you need to carry 30 gigs of movies with you all the time? You can get portable drives the size of an iPhone these days.

Anybody have experience with Directv receivers and an airport express?

Specifically, I have 3 HR24-500's connected to the whole home DVR service. I want to connect them to the internet. I have an Airport Time Capsule as my router and I also have an airport express ready to go but cant seem to configure everything to work together. The airport express is working as it currently brings an internet connection to all of my other components via a 4 port switch but I cant seem to get the DVR to work. It shows its connected to the network but no internet. Im very frustrated. Please help.
Thank you in advance.

The Internet hook up should have been performed by the DirectTV installer. There is a specific procedure for this involving the Whole Home equipment.
It would probably be best to have a DirectTV installer hook this up for you, but the Direct TV help forums might be able to provide you with a step by step procedure.
http://forums.directv.com/
A note of caution...the Whole Home setup is not supported over a wireless connection. There's just not enough bandwidth available over a wireless connection to provide reliable high definition video performance. The DirectTV installer will not hook up the Internet connection unless it is hard wired back to your main router using an Ethernet or special Co-Ax connection.

Anybody had experience with Audigy2 PCMCIA + PCMCIA to PCI adapter?

I have been using my Audigy 2 ZS (PCMCIA) on a laptop as a media center for a looong time, but the laptop died and I'm using a cheap desktop for it.
The built-in soundcard lacks luster and I want to use my Audigy in it, but I'll be needing a PCI to PCMCIA adapter. Because the Audigy 2 ZS was so picky about the Cardbus adapter it was connected to, I want to know of other peoples' experiences on doing the same thing.
Has anyone else connected their Audigy 2 ZS - laptop into a desktop using a PCMCIA-to-PCI adapter? Which brand/model and how did it work out?
Thank you.

Sonnet seems to be the most Mac friendly and, as I recall, they answer customer questions very quickly. Try:
http://www.sonnettech.com/

Has anybody some experience with acquiris digitizers (placed in PXI)?

Hey guys,
I am using a Acquiris DC140 Digitizer in my PXI and I'm trying to control it via Matlab, but it does not work.
Error messages similar to the following example appear in any case of given m-file usage:
??? Undefined function or method 'AqDrvMex' for input
arguments of type 'char'.
Error in ==> Aq_getNbrInstruments at 10
[status nbrInstrument] =
AqDrvMex('Aq_getNbrInstruments');
I have no idea whatever is meant with AqDrvMex.
it must be some kind of .dll-file, but I find myself clueless where to get it from?
I wrote this to Agilent's support. I hope they can help me.
Nevertheless, it would be great to find some help here, either.
Thanks 4 reading

Hello foe,
i think it´s the best idea to contact Agilent because MathWorks also
write that the support for this devices is to contact Agilent.
You also can use this instrument under LabVIEW there are driver on the homepage.
best regards
best regards
Alexander Glasner
AE NIE

Anybody have experience with Flex in VMWare environment.

I have a flex 3 application that is in our users startup folder and loads (IE 10) when our computers log in to our network. The desktops exist in a VMWare view virtual environment. On startup the application fails to load, and in the address bar the path to the application is prepended with:
"res://ieframe.dll/acr_error.htm#"
At that point clicking the home button reloads the page and it show fine.
I realize this is likely a VMWare issue but was hoping someone in the Flex community might have a clue as to what might be causing this.

The Internet hook up should have been performed by the DirectTV installer. There is a specific procedure for this involving the Whole Home equipment.
It would probably be best to have a DirectTV installer hook this up for you, but the Direct TV help forums might be able to provide you with a step by step procedure.
http://forums.directv.com/
A note of caution...the Whole Home setup is not supported over a wireless connection. There's just not enough bandwidth available over a wireless connection to provide reliable high definition video performance. The DirectTV installer will not hook up the Internet connection unless it is hard wired back to your main router using an Ethernet or special Co-Ax connection.

Has anybody got ss with old platform

Having contacted BT to subscribe to Sky Sports, I have been told I need a new box as to have SS you need the new platform. Can I ask if any one has SS on the old platform and if you can mention if you are using black or silver box. Just curious as I don't believe all SS users have the new platform as yet (menu down the side) as I am being told.

dgates wrote:
Can I ask if any one has SS on the old platform and if you can mention if you are using black or silver box. Just curious as I don't believe all SS users have the new platform as yet (menu down the side) as I am being told.
I'm on the old platform and have ESPN with Sky Sports. Black box.
Silver boxes stopped working with Sky Sports about 8 months ago and so are now defunct for this purpose.
We will all shortly be upgraded to the new platform and so BT just want to kill two birds with one stone by upgrading you to both SS and the new platform.
You should not be charged for a new black box. If they say you will be (£40) this information is wrong and I suggest to anyone encountering this problem to contact the Mods who will get this issue looked into.
Contact BT Care Team.
Rank - Mostly Harmless.

Anybody made experiences with JMS Queue Receiver (QPAC)?

you find my question in this thread:
http://www.adobeforums.com/cgi-bin/webx/.3bc3bd03
regards, nico

Made progress on this issue... reade more hear:
http://www.adobeforums.com/cgi-bin/webx/.3bc3bd03

Does anybody have experience to work with jsapi in midlet?

Hi every body
I want to write a java midlet for mobile phone with ability of speech recogntion ,can I use jsapi2 ?
does anybody have experience with jspi in j2me?

Hello,
see the attached example I use for a PCI-7344.
You must just know that these AO have an offset: If you set "0" as input, you will perhaps have between -150..+150mV at the AO. This can be annoying depending what you do with it. However, this offset doesn't vary over the time.
In the attached VI, you can give this offset one time for ever.
Hope this help.
Attachments:
AO_Motion.vi ‏51 KB

Anybody got experience with Hitachi Deskstar 7K750?

Similar Messages

Maybe you are looking for