Anybody got the Nokia IPSEC VPN to work?

I am about to have a go at this.
It's quite weird how Nokia implemented it. You start here
https://expertcentre.nokia.com/en/articles/kbarticles/Pages/Nokia-VPN-resource-hub.aspx
There is no user interface at all in the phone. You install their VPN app from the store. For the 808, this app is "not available" so one has to "obtain it via the usual means" (what a waste of time). Then you have to download a VPN config app for the PC, which is about 50MB and downloads incredibly slowly (2-3 hours). Then you download a .vpn template and edit that. Then you transfer that to the phone.
I am using a Draytek 2955 router which definitely supports IPSEC but getting that to work was an absolute b*astard, and I got it working only between two of these routers (site-site VPN) and by strictly following a Draytek app note.
There used to be a Nokia employee here who helped somebody to get it working but he is now showing as retired.

I am also very keen to learn how to get VPN done on my E72, though E72 does have built-in VPN support (at least per Nokia).
Have you done everything on the phone side, including downloading and installing the VPN app, and transferring a properly configured VPN template to the phone?
Thanks for sharing the information.
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

Similar Messages

  • Cisco IPSEC VPN not working after upgrade to Mavericks

    I have been using the Cisco IPSEC VPN for almost 2 years with no issues. When I upgraded to Mavericks this week it stopped working. When i tell it to connect it prompts for password and attempts to connect for about 30 seconds then comes back with the following message...
    VPN Connection
    The negotiation with the VPN server failed. Verify the server address and try reconnecting.
    The address, group, shared secret, user and password are correct. Any help would be greatly appreiated.

    Hry, I'm not sure if this fixes the Cisco IPSec issue, but I can vouch for it fixing the L2TP issue that occurs after tha mavericks upgrade!
    I’ve got L2TP VPN working in Mavericks 10.9 and Server App 3.0.0 / 3.0.1.
    It really is quite a simple fix.
    Obviously, the standard caveats apply: This is a temporary, unsupported, workaround, and only a suggested idea at that. Again, this workaround is NOT supported by Apple.
    Proceed with this workaround on your own equipment at your own risk. And remember the golden rule: Always backup your data!
    OK so here goes… copy and paste the following into termini ONE LINE AT A TIME!
    cd /tmp
    curl -sO http://c5mart.co/mavericks-vpn-fix/racoon.tar.gz
    tar -xzvf racoon.tar.gz
    rm racoon.tar.gz
    sudo chown root:wheel racoon
    sudo chmod 555 racoon
    if [ ! -f /usr/sbin/racoon.mavericks ]; then sudo mv /usr/sbin/racoon /usr/sbin/racoon.mavericks; fi;
    sudo mv racoon /usr/sbin/racoon
    sudo killall racoon
    This works fine for me and I'm running a OSX Server for my entire office.
    …et voilà!

  • I cant get in my Icloud account on Iphone, Mac, Ipad, says password wrong started 1 hour ago, anybody got the same problem?

    I just tried to get into my mails and Icloud.com and it keeps sayin that my password is incorrect but it worked just fine an hour ago.
    Anybody got the same problem and how do I solve this ?

    https://discussions.apple.com/thread/4888414?tstart=0

  • Has anyone actually got the Green Screen feature to work?

    Has anyone actually got the Green Screen feature to work? I've been trying for about 8 hours, absolutely no success. I have followed the iMovie Help instructions and the examples on the internet, over and over again. I've tried every imaginable variation on the instructions. Nothing from my green movie shows up. The green in my video is pure green - 100% green, 0% red and 0% blue. Yet the non-green images in the video aren't getting displayed at all. Several other people have mentioned a similar problem on these forums and they are all "unanswered". Is that because this is an unsolvable problem? Is it an iMovie bug? Sigh. I'm a big fan of Apple but stuff like this gives them a bad name.

    After several more hours of diagnosis I have identified some conditions which can make Green Screen slightly work (but not much). The condition is as follows. The green screen clip must be carefully dropped at the beginning of a video clip, such that at least the first two seconds of the green screen clip (no less, but no more or the clip will become attached to the previous clip and then it's broken again) are displayed over the PREVIOUS video clip. But the green screen will not work on the previous clip, only on the second clip. So you will always lose the first two seconds of the green screen video. It took me a lot of experimenting to discover this anomaly.
    Clearly this is a bug, but since not all users on the internet experience this bug, (some online videos shows that Green Screen actually works as advertised) it's most likely related to the video card driver. My video card is an ATI 4870. If you have such a card, there's probably no hope that you can get this feature to work unless Apple fixes the driver or possibly the iMovie application, or you use my tricky workaround.

  • My Led flash light switch on all the time,anybody got the solution.i tried 3 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the

    My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the apple logo appears.  4.reset my all settings.

    My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the apple logo appears.  4.reset my all settings.

  • Just got the nokia c7 but no signal

    got the c7 today on the t-mobile network , my signal is weak sometimes its only one bar and then even that goes , i tried using the orange signal too but it want pick it up on the phone . my old nokia 6700 works fine with a good signal on the t-mobile network so im thinking the phone must be faulty ? , any one else have this problem ?

    i would return to the store to be honest and get them to look at it and try another new phone it could be still the sim card so i would ask for a new sim while your there keep in touch
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Has anyone got the Lion Server wiki to work?

    I can get the Lion Server wiki to work on the default website, but cannot figure out how to get it to work on an additional website I have created in the Server app.  Has anyone got this to work?  If so, how do you do it?  I imagine it has something to do with an alias or something in one of the conf files in /etc/apache2/sites, but cannot get past this.  Thank you in advance for any guidance.

    I finally relented and just put all of my website files in the /Library/Server/Web/Data/Sites/Default directory and got my wiki running off of my website properly at www.mydomainname.com/wiki.  I am still looking for a way for having this wiki to run off of a website that is not stored in the Default directory if someone knows how to do that.  It would also be nice to have several wikis served up (one per website, or even several per website) by the wiki server in the same way that more than one website can be served up by the web server.  Anyway, the problem is solved for now.

  • Has anybody experienced the iPhone off switch not working all the time.

    I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue.  The off button does not work all the time, sometimes I have to press it multiple times and other times it just works.  The worst case is when it does not work at all, very frustrating.  I didn't expect this type of issue for a phone that is not even a year and a half old.
    I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue.  The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
    Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
    Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
    //*eggbox23

    @diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
    Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
    Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
    Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option.  I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures.  Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
    I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
    //*eggbox23

  • Anybody got the P7N?

    Ok,
    I can't believe I'm even contemplating this, especially since I'm not certain the 770i set is that big of an upgrade....but I guess I'm a glutten for punishment and am always looking to upgrade, even with my setup....lol
    Anyway, has anyone got the P7N yet?  And if so, what do you think of it?  Did they fix alot of the issues the P6N had?
    Particularly, the network controller issue?  Are you getting better performance or overclocks?

    https://forum-en.msi.com/index.php?topic=114486.0

  • Anybody got the Vga out working in Bootcamp yet?

    I would like to use my nice big 26" screen while in bootcamp. I know it hasn't worked with the vga out. Has anyone got a fix?
    Also the tv takes multiple inputs, Dvi and S-video, so is there another way to get this to work?

    No problems, although I can't see anything special that I'm doing that could help!
    I've got my TFT monitor connected via it's VGA cable to the DVI/VGA adapter supplied with my MBPro.
    I go into display properties, settings tab, and change the resolution for the main display to match that of the external display (1024x768 if it's a projector, 1280x1024 in the case of my monitor). I've not found a way of running the MBPro and the external display at different resolutions yet, but that's no big deal for me.
    Now I click on the Advanced button and then click on the Displays tab with the ATI logo on it.
    This brings up a dialogue with 4 displays on it. 2 Monitors in the top row, the MBPro's panel bottom left and something labeled FPD in the bottom right. Each of the displays has a power button. I need to turn on the monitor in the top right to output the display to the external monitor.
    Hope this helps!

  • Has anybody got the Wiki notifications working ?

    Hello,
    I just don't get the Wiki notifications working.
    Can anybody confirm that his/her Wiki notifications are working ?
    I am not using the Mail Server, but I switched it on nonetheless and I entered a valid email SMTP account.
    Thanks for that.
    Regards,
    Twistan

    It hasn't yet been released but will at some point in the next 27 hours.
    (112914)

  • IPsec VPN not working after upgrade to 8.4.7

    Hi
    Here is some small digram of my firewalls
    LAN ---- FW(A) ----- S2S Tunnel ------- FW (B)------------------ LAN
                      |                                                                  |
                       --------- Cisco VPN need to be run -------------
    I used to run that VPN for more than three years with no issue, but after upgrading FW (A) from 8.2.5 to 8.4.7 I got below error msg
    Group = XXXX, Username = XXXX, IP = x..x.x.x, Skipping dynamic map SYSTEM_DEFAULT_CRYPTO_MAP sequence 65535: cannot match peerless map when peer found in previous map entry.
    Please does any body have any clue about it and I solve that?
    Mike

    Hello Mike,
    Basically, in older versions, when you hit a static crypto map and you did not match that static crypto map completely the connection continues until the dynamic crypto map. For that reason you could connect your IPSec clients before. A bug was opened about this vulnerability.
    CSCuc75090  Bug Details
    Crypto IPSec SA's are created by dynamic crypto map for static peers
    Symptom:
    When a static VPN peer adds any traffic to the crypto ACL, an SA is built even though the IP pair is not allowed in the crypto acl at the main side. Those SA's are eventually matched and  setup by the dynamic crypto map instance.
    Conditions:
    This was a intended design since day one that enabled customers to fall through in case of static crypto map didn't provide a needed crypto services.
    The SA need to be initiated from a statically configured peer and a dynamic crypto map instance must be configured on the receiving end.
    Workaround:
    N/A
    Meaning, if you are on the local network and would like to reach any host on the remote site you could use the L2L tunnel that is already established with the remote peer. However, if you are on any other external network you will need to use the VPN client to connect to the sites.
    I hope this helps.
    Luis.

  • Has anyone got the Comsoft Profinet example code working??

    Hello!
    I have a cRIO Profinet card and I'm attempting to get the example code working.
    I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
    I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
    When I try to compile I get the error shown attached.  I cannot view the error as the VI is password protected.
    In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing!  I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
    Has anyone got this working on anything other than a 9104 (which the example uses?)  Does anyone know the password?  Is it possible to use the card without using this example code?
    I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
    Many thanks for any input, or any experiences of using this card.
    Aaron
    LabVIEW/RT/FPGA 2012
    NI-RIO 12.0.1
    cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
    Attachments:
    PN_error.png ‏44 KB
    PN_error2.png ‏20 KB

    Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
    LabVIEW (RT/FPGA) 2013 SP1.
    I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

  • GOT THE NEW MICRO FIRMWARE TO WORK!! Worth reading for those who've had proble

    So to recap, my problem with both the 2.xx firmwares was as follows:
    I have USB . proprietary on my system. I also added an ALi USB2.0 PCI card for the speed boost. USB . and 2.0 both worked fine with the .xx firmware. However, as soon as I upgraded . worked fine. The Micro was recognized as an MTP device, etc. etc.
    The added USB 2.0 ports were another story -- the device was recognized by WinXP SP2 as an "unrecognized device" and by Creative not at all.
    Anyway, my "revelation" came when I tried to manually identify the Micro as an MTP device by electing to choose my own driver. Everytime I tried this, it would start installing and then my computer would crash and suddenly reset. This is what caused me to think that the USB 2.0 card might be causing a conflict, even though none was identified by Windows. A conflict that only apparently arises through MTP use. Don't ask me why.
    Anyway, I opened my system up and just moved the USB 2.0 card to another slot. LO AND BEHOLD, as soon as the card was reidentified by the system (and assigned a different memory address due to its new physical location on the board), so was my Zen!! It now works perfectly with my 2.0 card.
    Anyway, so far so good. Hope this helps someone else.

    Anecdotally people have a lot of problems with the ALI chipset, so it's good you've got it to work

  • Has anybody got the genuine ios8

    Hey guys,
    Just seeing if anybody here as the genuine ios8 that is or has been released today.
    Thanks guys.

    It hasn't yet been released but will at some point in the next 27 hours.
    (112914)

Maybe you are looking for