Anybody has a LabVIEW 6 driver for Agilent 8510C?

Hello. I have LabVIEW version 6 and I am trying to talk to an Agilent 8510C network analyser. I seem to be able to communicate with the instrument only for sweep, number of points, etc, but I cannot transfer any data from the 8510 to the PC (to export data to Excel). I tried saving data to memory, and using the "outpdata, outpfrmt, outpraw" commands to transfer numbers to PC with no luck.
The NI site has only labVIEW 7 and 8 driver versions, so I am stuck. Has anybody developed anything for L.6? Any help much appreciated

Give this a try. In the future, if you need other drivers, it would help if you would attach the driver from NI's site. It's pretty simple to do a save for previous version assuming someone still has older versions of LabVIEW still installed. A lot of us do so it just makes it easier to do the down conversion if you attach the file you need converted.
Attachments:
hp8510_6.zip ‏1163 KB

Similar Messages

  • Has anybody got a labview driver for Lecroy 9410 ?

    Has anybody got a labview driver for Lecroy 9410 ?

    Unfortunately I was unable to find a driver for this instrument either. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
    http://zone.ni.com/idnet/other.htm
    We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://zone.ni.com/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would sugges
    t contacting one of the Alliance members at:
    http://www.ni.com/alliance
    If you have any further queries, please let me know

  • Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

    I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
    Does anyone have one?
    Thanks,
    Avner

    Hello,
    It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
    Thank you,
    JLS
    Best,
    JLS
    Sixclear

  • Looking for Labview driver for Agilent 4294A (HP)

    Help!
    I've been browsing the driver database looking for the Labview GPIB driver
    for Agilent(formerly HP) 4294A Gain-Phase Analyzer.
    Does anyone know where I can get it?

    Hello all,
    NI is interested in developing LabVIEW and CVI drivers for the Agilent 4294A. I have been trying to obtain one of these units on loan from Agilent for the past couple of years with no success. If anyone can spare their 4294A for the duration of driver development or can influence Agilent to loan a 4294A, NI will write certified CVI and LabVIEW drivers for it.
    Jason Hobbs
    Instrument Drivers

  • Labview driver for agilent 8164A tunable laser

    I'm working on a project that involves setting up our Agilent 8164A lightwave measurement system in labview. I cannot locate the driver software on the NI website. Please let me know where I can download the driver for this equipment. Thanks.

    Actually we don't have a driver for that instrument in our website, so that means that we also don't have it in the CD. So you may want to check the Agilent's website, or as a matter of surprise, I found in our database one document that was talking about some past issue and it involved the 8166 instrument, so the author attached the driver for this instrument so we can reproduce what he found out, so I'm attaching this file here which is the file the previous Sr. mention, "hp816x", I installed it in my computer and run it and it is an Agilent made driver, so you can use this one or try to contact the Agilent people. Also you may request a LabVIEW driver been made for this instrument, please see the details at: O
    ther Driver's Resources from our download site.
    Good luck!
    Nestor Sanchez
    Applications Engineer
    National Instruments
    Nestor
    National Instruments
    Attachments:
    816x.exe ‏2875 KB

  • Does anybody have a LabView driver for an OPOTEK tunable laser?

    I am looking for an already complied and working driver for the OPOTEK Vibrant tunable laser.

    Yes, thank you, i looked into that.  I seem to be having
    difficulty contacting them by phone and email however.  I figured
    i would try NI and see if anybody has already made a compiled VI.

  • Does anybody has a CDN491 driver for CVI?

    Looking for a friendly interface to this board.

    Yes, thank you, i looked into that.  I seem to be having
    difficulty contacting them by phone and email however.  I figured
    i would try NI and see if anybody has already made a compiled VI.

  • Anyone has an instrument driver for Agilent E8364 50GHz PNA

    Does anyone have a working instrument driver for the E8364 50GHz PNA? I am currently tryin to use the agpna instrument driver downloaded from NI but i am having errors. The PNA balks that the "query is unterminated" and then the VI times out. Please let me know if you have a working instrument driver.

    Is this the driver you are downloading?
    If so,
    - Are you running the Getting Started VI to test communication?
    - Did the ID query pass?
    - Make sure you have VISA 2.6 or later installed.
    - Try running NI-spy with with the Log to File option enabled and post the spy capture.
    NI Spy Tutorial

  • Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

    I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

    Hi,
    There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
    Multi-Environment Certified IVI Instrument Driver
    Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
    The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
    Try LabVIEW 7.1 FREE Online
    If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
    -John M

  • Is there any LabVIEW driver for the Agilent 53147A counter/power meter?

    I am trying to find a LabVIEW driver for the Agilent 53147A counter/power meter, but I cannot find it. Is there any?

    NI does not have a driver and a quick check with Agilent shows that they don't have a driver either.
    You can go to http://www.ni.com/devzone/idnet/ and request a driver. You will also find links on how to create your own driver. Your other option is to use the Instrument I/O Assistant.
    p.s. In the future, you should use the Instrument control board for posting questions. this board is for NI counter/timer products.

  • Does anybody already developed or knows where can I find a LabVIEW driver for a CETA 800 equipment?

    Ronaldo Schwarz
    Selco Sistemas Eletronicos Ltda

    Ronaldo,
    I just did a search of the web (and of NI resources), and I could not find any helpful pages offering information on LabVIEW drivers for this CETA 800 equipment.
    The only suggestion I have is that perhaps the manufacturer of the device may have a driver, or may perhaps know of someone who does provide one.
    I hope you are able to find a LabVIEW driver for this instrument. If you end up having to write one of your own, you can visit www.ni.com/idnet to find several resources on writing your own instrument drivers.
    Have a pleasant day.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

    where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
    if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
    http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
    so i could modify and use the driver

    Hello,
    It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
    Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • RS232 Labview driver for SR830 lockin Amplifier

    Hi,
    I want to install Labview driver for Stanford Research SR830 lockin amplifier for RS232 port. NI has drivers for GPIB but I could not find any for RS 232 comm port.
    Please let me know how can I find driver for RS232 port.
    Regards,
    Nitin

    Dear Jason S,
    I also want to communicate with sr 830 with the RS232 interface. You said I had to rewrite the whole thing. What does that really mean? Rewrite the driver? If so, what language will it be?
    JasonS' wrote:
    Hello Nitshu-
    As you mentioned, this driver only supports GPIB, and not RS-232.  This driver was originally created in 1994, so it was not created using VISA.  This means that to convert this driver you would need to essentially rewrite the entire thing.  There are not currently any plans to update this driver to support RS-232, but you could easily communicate with it by adding a GPIB Interface to your system.
    Let us know if you have any specific questions we can help answer.
    Jason S.
    Applications Engineer
    National Instruments
    Thank you for answering my question

  • LabVIEW drivers for Agilent Noise Source 346B and Signal Generator E8257C-520

    Could anyone please tell me where to find LabVIEW drivers for Agilent Noise Source 346B and Agilent Signal Generator E8257C-520. I did not find them on NI's web site. Thank you!

    To my knowledge, the Agilent 346B Noise Source is not a programmatically controllable instrument and therefore we can't create an instrument driver. I suppose it is possible to be controlled through an instrument (like the PSG) but I don't see any documentation on this.
    As for the E8257C, we are insterested in providing a LabVIEW driver for this instrument series. Let me know if you are interested in assisting our development effort by loaning us the instrument.
    Jason Hobbs
    Instrument Drivers

  • Labview drivers for agilent e4432b ,can`t find way to control multitone ???

    labview drivers for agilent e4432b ,can`t find way to control multitone ???How to deal with it
    Solved!
    Go to Solution.

    Hello Brownheart,
    Drivers for box instruments are not meant to cover all applications of an instruments use, only the most common uses. Regardless of discussing whether multitone is a common use for this instrument, a cursory examination of the available functions in the driver does not reveal this functionality.
    What you will have to do is create your own config VI using the information from the programming manual of the device. Not ideal, but at least the provided NI driver gives you a starting point from which to add this functionality.
    Regards,
    Dan King

Maybe you are looking for

  • Copying music b/w 2 iPods on 1 Computer

    I would like to copy music from my iPod to another iPod on a different computer using a different iTunes account. When I hook up my iPod on the other computer, I can see my music, however, I can't just click and drag the music to the other iPod when

  • I'm looking for an app to catalog contacts I am making.

    I'm looking for an app to catalog contacts I am making. I would like to snap a picture of a product or idea and then log it into an app to which I could add notes about that product as well as be able to attach contact information for this product or

  • Microsoft Word vs. Pages..?

    I'm in need of some feedback of Apple user experience in using Word vs. Pages? I was used to AppleWorks until it was discontinued and been trying to use Word as many people (PC/MAC users) use it as a standard word processing program. But I'm not real

  • Why does movies and videos keep pausing and playing in mozilla 4

    it does this in window 7 mozilla firefox 4 but doesn't do it in internet exployer 9 quite as bad.

  • Retrieve 7 bit mail

    my code is a very normal retrieve mail from the sample demo from javamail 1.4.... i have trouble to retrieve 7 bit mail... pls provide me a solution..... Message from yahoo.com. Unable to deliver message to the following address(es). <jafdcassdsdfhjs