Anybody has any problems with installing and printing with canon lbp6650dn?

hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!

Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus

Similar Messages

  • Loaded 3.6.3 on Mac with 10.5.8 - no longer get printer recognition. Pinter is there with metwork and prints with Windows XPPro

    using mac10.5.8, since loading 3.6.3 can no longer access printer. Even without ff running. Pinter is a network unit that works with Windows fine. Can't even reload printer driver.
    == This happened ==
    Every time Firefox opened
    == First time FF 3.6.3 loaded

    It may tell me that you are seeing the "popular" complaint about the intermittent MM behavior.  Do google searches for "skipping magic mouse" or similar wording and you will get lots of hits.
    One suggestion which some have claimed works is to stick a little ball of aluminum foil between the batteries and their contacts.  The theory behind this is that not all batteries are created equal in the sense that the positive contact is slightly higher in some makes and not the others and that the ones with a shorter contact actually break contact due to the battery moving slightly in its compartment.  So the al foil is to take up the gap.
    I personally cannot say this theory is valid one way or another.  I use rechargeable Sanyo Eneloops and they seem ok. 

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Just bought the new i phone 4s, set up my apple id, verified with email. I can sign into it on the computer no problem but cannot get to it through iphone. Unable to download apps or music. let me know if anybody has any solutions, thanks

    Just bought the new i phone 4s, set up my apple id, verified with email. I can sign into it on the computer no problem but cannot get to it through iphone. Unable to download apps or music. let me know if anybody has any solutions, thanks

    If you have an old ID in Settings>iCloud as a result of updating to iOS 7, to change it you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change (you should need to verify the old account).  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

  • [Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?

    Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
    I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option.  Any recommendations?
    Any info is greatly appreciated.

    Quote from: dannol48 on 23-June-05, 02:25:47
    The RS480M2-IL haa a CnQ option in Bios. 
    Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
    Danno
    Hello Danno ^^¿''
    Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed)  with the 3DMARK  2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
    Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
    thanks and enjoy the time 
    PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya..

  • Severe problem with installing and starting Audio-DVD Pla

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

  • I am having problem with trying to install the printer with wireless connection​.i have windows 7

    the blue light on top of the printer blinks very fast and intermitenly.  i cannot install the printer with wireless.  I tried with the CD that came with the printer but the green install bar just stops and freezes.  I have a 4 month old Dell laptop.  Printer just purchased from HP is Laser Jet Professional P1102w.

    Are there any third party firewalls installed (e.g. Kaspersky, Norton, BitDefender, etc.)?  It sounds like something is blocking the software and third party firewalls have been known to block communication with the printer.
    How far in the installation process do you get (what options are you able to get to)?
    Is the USB cable connected at the start of the installation?  
    Do you receive any errors at all?  If so, what are they?
    Have you tried using Smart Install?  Smart Install works by connecting the USB cable to the computer.  By default, you should get a prompt to run a file.  Running this file starts the Smart Install process.  
    This video is a good guide to Smart Install.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Will AIR has any problems in the future with Android?

    Will AIR has any problems in the future with Android?
    If we are experienced in flash, is it better to do the mobile work with AIR or HTML5?
    But we are doing flash only so that we may face problems if we faced any bugs, is it expected to have any bugs or complexities, we can do flash with AS3 and we will depend on flash in publishing

    Do you mean you dropped the iPad Air?  Is it working properly?  Is the screen damaged?
    If it is working properly and has no signs of damage, it is probably ok.

  • HT5676 my macpro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help!! and what does internal error got to do with installing a printer?

    my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

    my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

  • Just installed update10.6.8 on my imac restarted and opened safari i have little snitch, it said xdefender wants to connect with apple, i let it. but after think has a malware been installed and update rooted it out? kindly advise

    ust installed update10.6.8 on my imac restarted and opened safari i have little snitch, it said xdefender wants to connect with apple, i let it. but after i thought has a malware been installed and  os update rooted it out? kindly advise

    i have this sorted, a misunderstanding it was not xdefender trying to connect with apple it was XProtect Updater from apple.
    jcher

  • I have used fire fox for a long time but have nothing but problems loading web sites..i think the time has come to uninstall firefox and go with internet explore..im tired of wasting my time trying to load web pages.

    Question
    i have used fire fox for a long time but have nothing but problems loading web sites..i think the time has come to uninstall firefox and go with internet explore..im tired of wasting my time trying to load web pages.

    does not solve problem..guess i'll have to get rid of firefox..never had problen before but to much hassle loading web sites.

  • Issues with connection and Printer

    Hi guys,
    I have two issues going on, but one of them is not related to security but I want to through out there to see if anybody can answer it or suggest me an appropriate thread.
    First question:
    Can anybody tell me how set up a printer in ECC 6.0, Please tell me step by step. It’s related with iw32 and printing. Please explain over all I never setup printer through SAP.
    My another question is more of a Basis question since I can’t find a basis thread I’m posting here, 
    The developer trying to connect to courion but some how the Courion connector did not work so we added sap_all, sap_new to the courion ID but it worked once and then it’s not working again.
    I was wondering if anybody has any idea about this.  Please give me some thought or recommendation.  (Courion is some other software)
    Thank you so much for any help in advance

    Replacing your wireless router now try.
    http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

    iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
    It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
    Thanks in advance for feedback
    Best regards,
    Marco

    Hello Jeff,
    Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone.  I would be concerned too if the audio on my iPhone was not working unless using speaker phone.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speaker
    http://support.apple.com/kb/TS1630
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How do we have 2 Apple ID on one iMac

    2 of us us one iMac How do we set up 2 iCloud accts

  • Creating a new application in E-BS

    Hello, Not sure, if OAF forum is the right one to ask this question, but as we have been customizing EBS only using OAF, asking it here. Are there any guidelines in deciding whether to create a new application or not during EBS customization. I mean,

  • Looking for a MFC, printer/scanner

    I am looking for an all in one printer scanner. I need both the printer and the scanner to work in arch linux, and I don't want to spend a week making it happen. I would prefer something that supports ethernet and both features work over the network

  • How to unlock my ipod screen

    How do you unlock the ipod touch screen

  • Start menu not working raises its head again

    anybody else with this issue? Ive tried all the previous fixes... app event log is full of this too. Activation of application Microsoft.Cortana_8wekyb3d8bbwe!CortanaUI failed with error: The application cannot be started. Try reinstalling the applic