Anybody have problems restoring Iphone 4 for verizon after replacing the LCD

anybody have problems restoring Iphone 4 for verizon after replacing the LCD

i didnt replace the screen on my verizon iphone, but i have had several problems in the past with restoring, however they are always easily solved for me by plugging into another computer and restoring from there once its restored off that computer you can then plug back into your computer and put your info back on.
also remember to copy the ipsw from your iphone software updates folder onto a flash drive and onto the computer you are using to update to save yourself form downloading the ipsw on that computer (if it is not already on that computer). then just do an option restore by holding option key when you hit restore and select the ipsw you want to restore to.
hope this helps

Similar Messages

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    Ask your question in an iPAD forum.
    This is the OS X Mountain Lion forum.

  • How do I authorise my Imac for Itunes after replacing the hard drive?

    Dear All,
    Apologies, but I am new to forums and understand that the issue of "Authorisation" of Itunes purchases and rentals has been done to death!  However, I have tried everything and have exhausted normal research on the Net, there doesnt seem to be standard sollution to my problem.   I have replaced the Hard Drive in my Imac 2008 with an SSD which makes the Imac very fast and effcient and completely clean of the usual trash in an old computer. So before renting my first movie, I did the following:..................................
    Formatted the hard drive and downloaded and upgraded to OSX to 10.5.8 (the latest I can go on this Imac (I think) Intel 3.06Ghz 2 core and 4GB SSDRAM) 
    Upgraded Itunes to the latest available
    Upgraded Quicktime to the latest available.   
    I rented a film which will not play and initially I got the "not authorised on this computer" message which kept repeating despite saying it was "waiting"
    So I did the usual apple support search and tried the following:..................................
    I checked that my apple User ID and password where up to date and that I was purchasing on the right ID
    Tried the standard.....Itunes/Store/Authorise this computer  -  tried unauthorising and then re-authorising No luck
    I tried deleting the  (/Users/Shared/SC info) file  No luck
    I tried the Terminal based solution  "sumo chmod -R 777 /Shared/Users" fix It didnt work either
    I don't get the authorisation warning any more but just get a black screen with a grey horizontal stripe across the middle
    I would be very grateful if somene could give me another sollution to try............................
    Thank you very much,
    Sfithy

    Double & triple check that you installed the hard drive correctly. 

  • Laptop G62 white screen after replacing the lcd cable to the board

    Hello
    i have replace de cable that goes from lcd tp the board and now i get a white display ...
    what could be wrong when i was moving the hinge before i was loosing the screen but now it's only white and external screen don't display anything
    Thanks

    There
    http://www.ebay.ca/itm/360904670472?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
    the funny thing is i just replace de cable ....
    Thanks

  • I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "manage local device storage usage." How?

    I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download.  There is not enough available local storage to download these items.  You can manage your local device storage usage in Settings."
    How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone?  Why is it telling me there is not enough local space?

    Hi RileyAvaCadenRiver,
    If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
    Apple: iTunes 11.1.1
    http://support.apple.com/kb/DL1614
    Regards,
    - Brenden

  • HT1414 I have the iPhone 4s. I have tried restoring my phone and cleaning out the ports, but I still cannot hear music or my videos playing. This happened after I did the last update on my phone. Is there anything else I can do? This is really irritating.

    I have the 4s. I have recently restored my settings and cleaned out the ports. I still cannot hear my audio for music or videos. My volume on the side of the phone does not work either. Everything workds in the setting menu. It is not a speaker issue because the ringtone works when people are calling and I can listen to the different ringtones as well. My notifications and text message audio does not work. My phone does not say that it is on a dock. When I try listening to music, the volume adjustment appears, but it is gray and unusable. Everything works when headphones are in plugged in and when it is on the dock. This started with the last iPhone update. What else can I do... this is becoming very frustrating.

    Hi shanny202.
    Really strange problem you have there. I have a few questions though.
    Please try again and try to make the phone as a new without restoringen with you iCloud-data or backup-data from iTunes. Maybe it is something wrong with the data (strange).
    Anyway, i think you should call Apple Support or visit an Apple Store, don't forgot to make a Genius Bar reservation.
    You locate the nearest Apple Store here: http://www.apple.com/retail/storelist/
    And here is Apples phone numbers around the world for support: http://support.apple.com/kb/HE57

  • I recently updated my iphone 4s for verizon. Its the newest update..anyways it ran through the processs of updating and then told me to plug it into my computer. I did and the only option i got was to restore my iphone

    I recently updated my iphone 4s for verizon. Its the newest update..anyways it ran through the processs of updating and then told me to plug it into my computer. I did and the only option i got was to restore my iphone. I did and on my iphone the bar loaded to about 75% and stopped. My computer came up with an error. It said it was unavailable to restore this is iphone and unknown error occured. I tried using a different cord different usb slot checked my computer software updated my itunes but the same effect happened. I am getting very worried that my iphone is going to go in the trash soon. Can anyone help with annoying problem.

    Hello the_problematic_iphone
    Check out the article below if you are not able to restore your iPhone.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I have just restored my ipod touch after being disabled.  Now it is asking for pasword, can I cancel this so I don't have to use a password?

    I have just restored my ipod touch after being disabled. Now it is asking for the passcode?  I still cant remember the passcode.  How do I go past this?

    You'll have connect in recovery mode and set it up "as new ipod" http://support.apple.com/kb/HT1808
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
    If the issue continues after updating and restoring your device, refer to this document.
    copied from http://support.apple.com/kb/HT1212

  • I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now?

    I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now? It worked fine before...

    natalieduffy wrote:
    it says 'your iphone could not be activated because the activation server cannot be reached'
    Typically this indicates a device that has been hacked to be unlocked or jailbroken.
    If that is the case, no support can be provided here.

  • HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

    I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

    Hi melvin victor,
    Welcome to the Support Communities!
    The information below may help you troubleshoot your iPhone battery issue:
    iPhone Battery and Power - Apple Support
    http://www.apple.com/support/iphone/repair/battery-power/
    Battery & power
    Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
    I hope this information helps ....
    - Judy

  • My iPhone 5 has numerous problems and I want to take it to an apple store to get a replacement but it is under my dads name... Does he have to be there for me to replace it?

    Hi guys
    I recently just bought a new iPhone 5 and it is already having some problems like not receiving messages when it has told me I've received one, the side button is getting really stiff and hard to change to silent and it always goes into SOS only mode...
    I want to go to the apple store and get a replacement but it is under my dads name.. Does he have to be there for me to replace it?? Thanks

    I'd suggest you call the Apple Store and ask to make sure. They may insist on your father being present since the iPhone was purchased by him, but quite probably they won't care. They usually don't check ownership of the iPhone since many are purchased as gifts or sold to someone else.
    Regards.

  • I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Alguine can help solve the problem. thanks

    I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks

    Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
    You should comply

  • We have been having a problem with newsletters for a client. The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!

    We have been having a problem with newsletters for a client.
    The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
    This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.

    Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones

  • Anybody have problems updating from Leopard 10.5.8 to Snow Leopard 10.6.3, or can I expect an easy update?

    Anybody have problems updating from Leopard 10.5.8 to Snow Leopard 10.6.3, or can I expect an easy update?

    rrk224 wrote:
    Anybody have problems updating from Leopard 10.5.8 to Snow Leopard 10.6.3, or can I expect an easy update?
    You shouldn't have too much trouble provided you have a relatively clean system.
    You should backup your personal users folders off the machine to a regular storage drive (not TimeMachine) and disconnect.
    10.6 upgrade strips out the 10.5 PPC code your not using and offers faster video drivers and some neat features like Exposé and Spaces which is highly productive as you can have 4-16 desktops visible at once and move stuff around between them (10.7 ripped that out)
    10.6 is the fastest OS X version Apple has made, 10.5 is universal (more code and older video drivers) and 10.7 is slower than 10.6 in tests on the same hardware.
    Your 10.5 install disk should be working, (check it first) stick it in and reboot holding the c key down, you should be able to boot from the disk. Apple isn't offering replacement 10.5 disks anymore so it needs to work in case you want to downgrade from 10.6.
    You can learn how to make copies of your 10.5 disk online. I would do so.
    You might decide to Carbon Copy Cloner (free/donations) your present 10.5 system to a blank external powered drive, you then can hold the option key and boot from it, erase and reverse clone back to your internal drive if you wish.
    10.6 will run all your 10.5 software (some may need a update) as it has Rosetta, a compatibility system for 10.5 code. 10.7 does not, it will not run your present Rosetta/10.5 software at all, you will have to buy all new versions. Also older hardware likely won't work neither, like printers, scanners and all-in-ones etc as their drivers either won't get a update or they won't make one to force a premature hardware turnover.
    If your upgrading your older 10.5 machine to 10.7, I'd advise against it, there isn't as much software ready for 10.7 (like 10.6) because it's forcing developers to rewrite their PPC based code
    10.7 is slower and more glitchs than 10.6, more depressing gray all over and strange UI changes.
    Also 10.8 is due out this summer and may not run on older hardware, so it's looking like you will be best off with 10.6.8 and leaving it at that to get the most software choice/performance and leave 10.8 for a new hardware/software purchase.
    If your going to 10.7 anyway, then check this database to make sure the software your going to have to buy is ready or not. IMO, Lion for you and your older machine is a wasted effort and better the new software on a new hardware purchase.
    http://roaringapps.com/apps:table
    I must admit though I throughly hate OS X Lion, as do a lot of other people,  it's only because it's quality is absolutely terrible and unbecoming of Apple, likely why Mountain Lion 10.8 is being released this summer a year in advance and only a year after Lion. However my opinion about Lion's poor quality isn't relfected in my advice to you. For you it's more of a older hardware/have to buy all new software type deal which a newer machine with 10.8 and promises to be better/more refined OS than 10.7.
    So in other words, upgrade to 10.6.8 and stay there, save your pennies for a new machine Early 2013, by then 10.8 would have several months and a lot of software/bugs worked out for it.

Maybe you are looking for