Anybody have tried to install 10g Application Server in Red Hat 9 ?

I have tried to install 10G Application Server in RED HAT 9, but it say that it need some rpm, I have install 10G Database and it work fine, bo 10As dont let me.
¿Anybody can help me?
Thanks in Advanced.

We have applied Patch# p4505133_10105_LINUX.zip for this. Check 390623.1 out.

Similar Messages

  • Error installing Application server on Red Hat 8

    I am trying to install Application Server but I cant because I get an error message saying the following:
    "Error in invoking target install of makefile /opt/oracle/product/ora9ias/sqlplus/lib/ins_sqlplus.mk"
    Can anyone explain to me what does this mean and how can fix it and move on with the installation? Please help!!!!!!!

    Hi,
    Im installing Oracle 9i DS and i got a few errors so i done what was told and linked my libXm.so.2.1 to libXm.so.3.0.1 .
    then i ran make -f ins_reports.mk install and i got these errors????
    /u01/apps/oracle9iDS//lib//libror90.so: the use of `tempnam' is dangerous, better use `mkstemp'
    /u01/apps/oracle9iDS//lib//libobx90.so: the use of `mktemp' is dangerous, better use `mkstemp'
    /u01/apps/oracle9iDS//lib//libca90.so: the use of `tmpnam' is dangerous, better use `mkstemp'
    /usr/bin/ld: warning: libobx90.so.0, needed by /u01/apps/oracle9iDS//lib//librw90.so, not found (try using -rpath or -rpath-link)
    /usr/bin/ld: warning: libnn90.so.0, needed by /u01/apps/oracle9iDS//lib//librw90.so, not found (try using -rpath or -rpath-link)
    /usr/bin/ld: warning: librws90.so.0, needed by /u01/apps/oracle9iDS//lib//librw90.so, not found (try using -rpath or -rpath-link)
    /usr/bin/ld: warning: libde90.so.0, needed by /u01/apps/oracle9iDS//lib//librw90.so, not found (try using -rpath or -rpath-link)
    /u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `vgttef'
    /u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `vgtlit'
    /u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `deupwdlete'
    /u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `rosuisSBind'
    /u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `snnlslmai'
    /u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `uiwnra'
    /u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `vgdudo'
    collect2: ld returned 1 exit status
    make: *** [rwclient] Error 1
    Can someone please explain why this is happening.
    Thanks alot.
    Jamil.

  • Install Oracle Application Server 10g(10.1.2) on Linux (AS 4.0)

    Hi all,
    I am trying to install Oracle Application Server Form and Report Services on Linux (Application Server 4.0).
    Following the user manual (B19314-02 ), but I don't know how to download and update Red Hat Enterprise Linux AS release 4 (Update 1) and requirement packages as: glibc-2.3.4-2.9
    glibc-common-2.3.4-2.9
    binutils-2.15.92.0.2-13
    compat-libstdc++-296-2.96-132.7.2
    gcc-3.4.3-22.1
    gcc-c++-3.4.3-22.1
    libstdc++-3.4.3-22.1
    libstdc++-devel-3.4.3-22.1
    openmotif21-2.1.30-11.RHEL4.4
    pdksh-5.2.14-30
    setarch-1.6-1
    make-3.80-5
    gnome-libs-1.4.1.2.90-44.1
    sysstat-5.0.5-1
    compat-db-4.1.25-9
    control-center-2.8.0-12
    xscreensaver-4.18-5.rhel4.2
    Please show me!
    Thanks.

    Hi all,
    I tried to download requirement packages:
    glibc-common-2.3.4-2.9
    binutils-2.15.92.0.2-13
    compat-libstdc++-296-2.96-132.7.2
    gcc-3.4.3-22.1
    gcc-c++-3.4.3-22.1
    libstdc++-3.4.3-22.1
    libstdc++-devel-3.4.3-22.1
    openmotif21-2.1.30-11.RHEL4.4
    pdksh-5.2.14-30
    setarch-1.6-1
    make-3.80-5
    gnome-libs-1.4.1.2.90-44.1
    sysstat-5.0.5-1
    compat-db-4.1.25-9
    control-center-2.8.0-12
    xscreensaver-4.18-5.rhel4.2
    from ftp://ftp.redhat.com/pub/redhat/linux/enterprise/4/en/os/i386/SRPMS/
    But when I installed packages, it was not successfull:
    # rpm -Uvh gcc-3.4.3-22.1.src.rpm
    warning: gcc-3.4.3-22.1.src.rpm: V3 DSA signature: NOKEY, key ID db42a60e
    1:gcc ########################################### [100%]
    # rpm -q gcc-3.4.3-22.1.srcpackage gcc-3.4.3-22.1.src is not installed
    Please help me!

  • 10g application server install on windows server 2003

    already installed on my pc oralce 9i database and oralce 6i
    now I m installing 10g application server on windows server 2003 but geeting error, when I click on setup button
    Error:
    checking swap space : 1488mb Available, 1535 mb required . Failed
    please guide me

    got it ... increased virtual memroy size 1550...

  • Does 10g application server 10.1.2.0.2 work for 9i database?

    I have installed 9i database on UNIX. then I am trying to install 10 application server 10.1.2.0.2. But somehow it force me to install a complete 10g database, which is undesireable for me. So I just wonder whether 10g application server can work for 9i database? If it works, how to install 10g app server with 9i database?

    Hi,
    The 10g database installed by the 10.1.2.0.2 application server is used by it as a metadata repository for configuration and also as an LDAP server for the Oracle Internet Directory.
    What components of the application server do you need? If all you want is Forms and Reports services, there is a standalone version that does not install the 10g infrastructure database.
    HTH,
    Jim

  • How to deploy dicoverer repport to 10g Application server

    We just installed 10g Application server, but we don't know how to deploy discoverer reports th it? Please help.

    Yes I am trying to accomplish the same thing. We created a 10g Apps Server but only loaded the Forms and Reports Services. We have a license for Discoverer 904 and install software for client desktops, but would like to use the Apps Server version.
    Can I integrate DiscovererAS into my existing server without haveing to install the complete EE ???? ANd for that matter, if I do have to go that route, how do I uninstall the "Bare bones" FormsReportsServices10g ??? I'm a complete newbie so please bear with me... thanks

  • 10g Application Server installation

    Hi Gurus,
    I have a server with Sunsolaris Operating system and planning to install 10g App Server.
    I have a x-windows on it.
    My question is, can i install 10g Application server like windows installation ? or still i have to follow the
    sunsolaris installation instructions ?
    Thanks in advance.

    Defineitely follow the Solaris specfic instructions. There are patches, packages and kernel parameters that must be configured properly on Solaris, before installing 10gAS. The OUI portion though is the same as on Windows, it's the pre- and post- that is different.

  • Installing Oracle Application Server 10.1.3.1 - failed to start opmnctl

    I received the following error when trying to install Oracle Application Server 10.1.3.1 on Linux Redhat 5.2:
    failed to start a managed process after maximum retry limit
    Log: /as/10.1.3.1/OracleAS_1/opmn/logs//HTTP_Server~1.log
    In the HTTP_Server~1.log:
    Start Process
    /as/10.1.3.1/OracleAS_1/Apache/bin/apachectl startssl: execing httpd
    Please help! Thanks in advance.

    hi,
    First check the log files why http is not starting up thro opmnctl cmd.
    In order to change the port..
    Take the back up of Original httpd.conf file and opmn.xml
    and then in $ORACLE_HOME/Apache/Apache/conf/httpd.conf file
    you will get parameter "port" and "listen"..so enter the desired port no
    Regards
    Fabian

  • Install Oracle Application Server 10.1.3 on OpenSuse 10 SP2

    Hi,
    I am trying to install Oracle Application Server 10.1.3 on OPENSUSE 10 SP2 and the install is failing when trying to start HTTP Server.
    OAS 10.1.3 has been installed on another OPENSUSE 10 SP2 however this was done by a previous colleague that has now left the company.
    Has someone installed OAS 10.1.3 on opensuse 10 sp2??

    Hi Andes,
    I got the same problem as yours. Please post your oraparam.ini for me to copy. Thanks a lot.
    andrew.

  • Oracle 10g application server

    Dear All,
    we have implemented the oracle 10g application server 10.1.2.0.2 now we pland to apply patch 3.
    can you guys guide me how to apply patch.
    i am familiar with oracle database from 9i to 11g , and RAC also but not with application server.
    please guide me.
    thanks in advance.

    Hi Sherkhan
    It isn't that difficult but you will need to read its documentation a little bit and should be familiar with the OAS architecture, so that you would know which components are used and where, so that you could upgrade them.
    For latest patches and patch sets for OAS 10g R2, check the following article on MOS/Metalink.
    Oracle Application Server 10g Release 2 (10.1.2) Support Status and Alerts ID 329361.1
    you should start by reading the readme of Patch 5983622 which is Patch Set 3. if you are logged on to Metalink, then access this link:
    direct link to the patchset 3;
    http://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622
    particularly, the first 5 sections. they
    a useful discussion: (probably)
    Re: Patching OID/ DB Upgrade Patch Set 10.1.0.5 before OAS Patch Set 2 or 3
    hope that helps!
    AMN

  • Errors when installing SGD 4.5 on Red Hat Enterprise 5

    I have a customer installing SGD 4.5 on Red Hat Enterprise 5 and is getting the following errors:
    /opt/tarantella/bin/tarantella: /opt/tarantella/bin/bin/ttahostname: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
    The customer has indicated that they do not have a lib directory?
    Any ideas would be greatly appreciated !
    Thanks
    Jeff Holland

    Hi.
    Never tried under RH5 but, to me, it's pretty strange the customer does not have a /lib folder.
    Are you in the position to check if their RH5 system is correctly configured (ie, not screwed up)?
    Is that a 32bit or 64bit edition?
    Could you manually "inspect" the /lib folder to see if there's some contents on it?
    Last, under which user account is the customer installing SSGD? Is it operating as root user?
    As per the Web site, RH5 is a supported platform so you shouldn't have any problems.
    Cheers,
    Rob

  • Install Oracle8.1.7 on Red Hat Linux 9

    I tried to install Oracle8.1.7 on Red Hat Linux 9 and got error message:
    Unable to initialize threads: cannot find class java/lang/Thread
    Could not create Java VM
    My env variables:
    THREAD_FLAG=native
    LANG=en_US.UTF-8
    CLASSPATH=/usr/local/jre/lib/rt.jar:/usr/jdk118/jdk118_v3/lib/classes.zip
    DISPLAY=:0.0
    Please help.

    I did export LD_ASSUME_KERNEL=2.4.1. Now the installation starts and I get
    [oracle@localhost Disk1]$ ./runInstaller
    Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
    and then get back to the $prompt after some time and the welcome screen never comes up.
    Whats wrong?

  • Anybody installed Oracle 10g application server on windows 2008 (64 bit) se

    Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.
    which version of OAS we should use?l. we are using dell server .
    regds
    santosh
    Edited by: user5429538 on Feb 24, 2010 2:59 AM

    Hi Santosh,
    Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.I dont think any version of Oracle Application Server is certified for windows 2008 yes.
    But, u can Install Oracle Application Server 10g Release 2 (10.1.2.0.2) on windows 2003 (64 bit) server
    Please refer below links for download and to check certification:
    http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
    http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
    http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html
    Hope helps
    Regards,
    X A H E E R

  • Installed Oracle Application Server 10g and Dev. Suite 10g to self practice

    Hello,
    I have Installed Oracle Application Server 10g and Developer Suite 10g on Windows XP 32.bit to practice Developer suite specially Forms and reports. Server has created the database by default.
    My questions are:
    1. Can i use default database for practice?
    2. Which Configuration Assistants mainly i need to configure in this regard?
    3. Do i need to install anything else?
    I am newbie to Oracle trying to self learning.
    Any help will b appreciated.
    With regards,
    MOHAMMED AJAZ.

    hi
    open the following pdf it will help u too.
    http://students.heinz.cmu.edu/docs/Oracle_10g_R2_Installation.pdf
    Can i use default database for practice?
    Did u install oracle database? if not then it will be better please install.
    sarah

  • Installing Oracle Application Server 10g 10.1.2.0.2  on RHEL 5.3

    Dear All,
    My Linux version is RedHat 5.3
    I want to Install oracle 10g Application Server on it please help me out to do so.
    Please help me,thanks in advance.
    Please provide me with the documentation link to install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
    Thanks and Regards
    Monoj Das

    install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
    Said that OAS 10.1.2.0.2 is desupported, you have to apply patch 10.1.2.3 to be fully certified on OEL/RHEL 5.
    See MOS doc. ID 564174.1 Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

Maybe you are looking for

  • Thoughts on Stream-to-Disk Application and Memory Fragmentation

    I've been working on a LabVIEW 8.2 app on Windows NT that performs high-speed streaming to disk of data acquired by PXI modules.  I'm running with the PXI-8186 controller with 1GB of RAM, and a Seagate 5400.2 120GB HD.  My current implementation crea

  • Organizing photos from an external drive.

    I am currently organizing my iphoto library vers 6.0.6 (322) and want to start on the stuff on my ext drive. Does anyone know a way to put files from the ext drive into albums without actually importing them onto your computer hard drive?

  • How to see how much data is used by computers on a network

    Hi, (I already asked this, but posted it in the wrong place... apologies) How can I tell the amount of data that some computer has downloaded from the Internet (via my airport extreme (new model))? I have an ADSL connection with a limit on the amount

  • Can't Save Custom Columns in Effects Tab?

    In the now archived thread at <http://discussions.apple.com/thread.jspa?messageID=5264320&#5264320> Jerry Hoffman and D. Gilmore describe how to right-click on a column in the Browser (other than the Name column) and then choose the Save Column Layou

  • Out of memory when render

    Hi When I 'render movie' I get the out of memory message. Is there a render folder in livetype i can empty? Not having much luck finding it Niel