Anybody having any trouble with hotmail on your iphone?

Up until yesterday, hotmail was working fine on my iphone4s. After that i cant delete any messages or refresh the screen. I can select messages, but i cant delete them. Anybody have any answers? By the way, hotmail is working fine on my ipad.
Thanks!

If you have two-step verification turned on, you are going to have to use a mobile password as shown in Hotmail's setup instructions, or turn it off altogether.

Similar Messages

I'm not having any trouble with the iPhone, but the iPad is a different story. It pairs

I'm not having any trouble with the iPhone, but the iPad is a different story. It pairs & syncs but hardly any sound or volume comes out of the Bose. Yes, the volume is turned up, it is synced & paired, but almost a whisper comes out. Anyone have any ideas? I assume it's the iPad since the phone works fine.... Help!

Thanks. We went to Best Buy, where we bought our phones and altho we thought we were "seeding" the ear buds far enough, we were not. There's that extra little "click" and they were in! So, they work well enough for our old ears. But, thanks for your input!

Iphone 3Gs won't update i get an error message that says i am not connected to the internet. i HAVE TRIED ALL THE RECOMENDED TROUBLESHOOTING. ITUNES UPDATE WAS SUCCESSFUL AND I AM NOT HAVING ANY TROUBLE WITH THE ITUNES STORE. SO IT DOESN'T MAKE ANY SENSE

When I go to sync my iphone 3gs itunes alerts me that an update is available. I check to download an update. I then receive an error message stating that I am not connected to the internet. I am 100% positive that I am connected and before this download I was instructed to update itunes which I did without any problems and restarted my computer. I have tried all of the troubleshooting suggestions. I have no problem syncing or using the itunes store. I just can't get the update. I also have no problems with my iphone connecting to a wireless internet connection. Please Help!!!!!!

http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357

Anybody having intermittent trouble with Godaddy webmail site?

About every other time I log in to the webmail account I have with Godaddy, the site is frozen, incomplete download, curser will not work, can only log back out. All other websites work properly. Firefox is the only browser I have been using up till now. Does Firefox not support the STMP webmail accounts very well?

i think everyone is over thinking this question i have.... i create a movie in final cut, i notice final cut uses .mov file extensions. my godaddy web site i use, its a pre made template site i use, i have created a page that allowys me to insert video, when i insert the video to the designated area its says godaddy does not allow .mov only uses mpeg,avi,wmv,mpg my question is when creating a project in final cut and it gives you a .mov extension and you need it to be mpeg,avi,wmv,mpg so that it can play on something requiring that, what would you recommend? the site only allowys the file to be 30mb so whatever compression i use, it needs to be able to make the file size to that...h.264 with one pass gets the file size right but again i am understanding the compression aspect but not the file type. i have inserted several files with mpeg extensions that were not created in final cut and they all work fine. I am not getting the web site to recognize the . mov. if you got the prompt can not use .mov must be mpeg,avi,wmv,mpg what would you do.... i have my project in final cut so you can walk me through it as if you had a open project in final cut. i assume it should go step 1. export to: ? and then adjust the different settings ? i noticed that final cut has some mpeg options, and i tried them but it didnt make the files small enough 30mb. is this a matter of converting my file to one that will work or am i needing to export it in a specific manner. Again i have successfully got multiple videos to work that have mpeg extension that were not created in final cut.

Anybody having any luck with raid and x2 on neo2?

Just wondering. I cant get it to work without hanging before the installing devices in windows. tried 1b0(had raid then just disappeared),1b3(has raid but hangs before installing devices and thats after i have to to go into f11 to make it use my array) and 1b4 same thing . Only thing left for me to try is try the 5.10 drivers
So how you get raid to work?

Your signature reads " WD raptor 74gb SATA". Are you using one of them?

Having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas?

having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas? have tried resetting cleaning earphone dock and still not working

Same here, I get no sound from videos, text messages. This happens for a while, then it works again then it doesn't work. When I go to settings, my "change with buttons" is on but buttons don't work. I have restored it but there is no change. Here is a picture of my screen when i try to change volume.

Does anybody have any experience with keyloggers and a good program to detect one on your mac? I think I may have one.

So yesterday I found out that my email address password had been changed. I don't remember doing this, but it is possible I changed it a while back and considering I keep my email constantly logged in. But at the same time, two of my apps were trying to access their "store". I play a game called League of Legends, which has an online store, and it randomly came up with the message "Could not connect to Maestro" (credit card). Then, Itunes (which I rarely use) came up with "sorry, we could not continue with your purchase". I think it's very strange that all of this happened at the same time, but hopefully it's a case of a forgotten password and two games bugging/crashing. I scanned my entire computer with iantivirus and it hasn't found anything, but I've heard keyloggers can be a bit hard to detect. Does anybody have any experience with keyloggers and if so, what program did you use to detect and destroy it?

If you think that a keylogger has been installed the only safe thing you can do is erase your drive and reinstall.
I don't think that is the case however.

I'm having big trouble with my new mainboard: Part II

Hi
I haven't got any more replies to my post "I'm having big trouble with my new mainboard" by Krelian 2003.09.13 at 05:25. Please help! I've been struggling with this for a LONG time. And now my computer won't boot at all! Sometimes the LED's in front of the computer lights up for half a second, and nothing more happens. The only sign of life is the green light in the LAN jack. It happened after I took the ide cable for my harddrive in and out of the mainboard. This is insane, how can that suddeny happen :O ?! I was asked by wonkanoby to post max amps for my PSU, I did, and I really need to know if I maybe need a new PSU, since he asked that. Can a new PSU solve all the problems mentioned in my previous posts? Everything was fine except that I couldn't get into Windows, before i tried another harddrive on my computer. How can that complicate things so much? I have tried going barebone, and taking out the cmos battery and setting the jumpers JBAT1, J10 and J11. I have also tried every suggestion I got. Please help! I really need to get this fixed!
-Krelian

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

TS3276 I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

[Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?

Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option. Any recommendations?
Any info is greatly appreciated.

Quote from: dannol48 on 23-June-05, 02:25:47
The RS480M2-IL haa a CnQ option in Bios.
Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
Danno
Hello Danno ^^¿''
Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed) with the 3DMARK 2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
thanks and enjoy the time
PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya..

I'm having a trouble with my iPhone iMessage.

I'm having a trouble with my iPhone iMessage.
I cannot send any pictures through iMessage only to my friend who's using iPhone4s.
iMessage without a picture goes well.
When I used iPhone5, everything worked fine.
But after I change my phone from 5 to iPhone5s, it's not working well.
please help me.
(sending pictures to friends using iPhone5&5s is working fine. It just not works with that friend(who is using 4s) only.)

Try this on the iPhone 5s go into settings turn iMessage off wait about 60 secs then turn it back on...under iMessage you will see it say waiting for activation...when it changes it will give a message that says iMessage can be sent blah blah blah...after you see that you will see an option that says send and receive ...click that...it should bring you yo a page that say you can be reached by iMessage at you should see you phone number with a check mark..it will be light grey...don't worry about signing into you Apple ID... You only need to do that if you are connecting you iPhone to another device (Mac, iPad, iPod touch) to receive the same iMessages on both...after that go back to the first message settings page again and at the bottom you will see mms messaging turn that off then back on....after that's done..tap you home key and send a test message
If it still doesn't work follow this http://support.apple.com/kb/ts2755

Ive got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?

i ve got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?

Often a Restart and a Reset will resolve these issues...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On...

I just bought a Macbook Air. I also have an external harddrive for which to transfer and save all my existing music from my PC. Will I have any troubles with iTunes recognizing where my music is located if I keep it on the external harddrive?

I just bought a Macbook Air. I also have an external harddrive for which to transfer and save all my existing music from my PC. Will I have any troubles with iTunes recognizing where my music is located if I keep it on the external harddrive and not save it on the computer's harddrive?

Just be sure to Follow the steps here to transfer your iTunes to an External Drive...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751

Any trouble with Mavericks installation?

Any trouble with Mavericks installation?

I too have upgraded four of my Macs to Mavericks and had no problems at all with any of them. One of the flaws of discussion groups is that one gets a skewed idea of the number of problems that users have because it is human nature to complain about something, whilst the majority of users who don't have a problem seldom bother to remark on this fact!
I, like most of the successful upgraders here, always follow a simple routine that involves firstly backing up, then (if upgrading multiple Macs) creating a bootable drive with the updater on, using Disk Utility or similar to repair permissions before upgrading the OS. I never use the Mac when upgrading and close all the programs and disconnect all external drives, save for the one with the updater on.
Following this routine means that I have never had a problem with an update since OS 7.5 on any of my 16 odd Macs. Of course, smugness always comes before a fall...!

Anybody have any experience with JPad Pro ?

I have just now downloaded JPad Pro version 5.0 from the web site www.modelworks.com
Does anybody have any experience with JPad Pro? I would appreciate if people who have worked using JPad pro give me thier opinions about it.
Thanks.
Vijay

I have never used it...I find jEdit to be valuable to me...mainly for the syntax highlighting..
My first 2 yrs' coding was spent with "notepad" and or "vi" (text editors) and command line javac...
I am of two minds as to whether to recommend this approach for everyone...I feel closer to the code I write in a notepad...but often times I missed things like "boolian" instead of "boolean" ... things that syntax highlighting assist you with... and unclosed brackets...which when you use an editor like jEdit (or I imagine jPad pro) you can catch easier, due to the auto-indentation.. Searching for these bugs teaches you little other than to be careful while typing :-)
I still run "javac" from the command line ... I think jEdit has a way for me to call it from the GUI..but I've never used it.
If it feels right to you..it is not wrong...the only thing I will NEVER use is a code-writing abomination... some people (even advanced users, and I will not say that they are pansies) use them.. In anything but expert hands, they are catastrophically dangerous.
The risk for code-writing IDEs is that you didn't write it, and there is an extra (un-needeed) level of abstraction from the code, one more level of complexity, that is a blockade to truly understanding the code and improving/maintaining it....

Anybody having any trouble with hotmail on your iphone?

Similar Messages

Maybe you are looking for