Anybody Know How To Change My Podcast Title Artwork?
I just need to know which file I need to replace. I have a new logo and would like to display it as my podcast photo.
moontroll wrote:
I too am hoping to find out how to get in to the xml file to change some things on my podcast feed to iTunes store. "Upgrading" to iWeb 08 renamed my webpages (changed spaces from "%20" to "_") so the old subscription feed no longer works. None of my subscribers can get the new episodes anymore. I think I need to add a "new url" command to the xml file, but don't know how to access it in iWeb. If anybody can help, please post!
iWeb doesn't give you access to the code of your pages. So the only way to do it (that I know of, someone else jump in here if I'm wrong!) is once you've loaded up your site to the server, you need to access the files that you published. Go into the folder that has all your podcast files in it. One of them will be called rss.xml. You need to open this in a text editor and make your changes and save them. Unfortunately I think that iWeb will overwrite this the next time you publish your site, and you'll have to go through this process each time. I don't know why iWeb doesn't let you access the code, I guess it's meant to be easier this way but it really isn't. Good luck, let us know how it goes.
Similar Messages
-
Hi does anybody know how to change the language of interface in demo version illustrator CC
Hi does anybody know how to change the language of interface in demo version illustrator CC ?
It doesn't help. I will try to download again illustrator
Отправлено из мобильной Почты Mail.Ru
Понедельник, 9 марта 2015 г., 18:36 +0300 от Mylenium <[email protected]>:
Hi does anybody know how to change the language of interface in demo version illustrator CC created by Mylenium in Downloading, Installing, Setting Up - View the full discussion -
Do anybody know how to change a PNG file from 1760 width by 1369 height to 800 x 600?
Do anybody know how to change a PNG file from 1760 width by 1369 height to 800 x 600?
Crop to 4x3 aspect ratio, then resize to 800x600
-
I have some updates due on some Apps I have downloaded but when I try to update I get a message saying that my account is not in the UK store so must switch to Ireland before purchasing. Does anybody know how you change stores? I did not do this deliberately!
Yup! Here:
http://support.apple.com/kb/HT1311 -
When I clicked on a link, it opens into a new window. I would prefer that it opens as a new tab. Does anybody know how to change this?
ThanksTools > Options > Tabs: [X] "Open new windows in a new tab instead"
You can look at the browser.link.open_newwindow prefs on the about:config page if you want to divert all JavaScript window.open() calls to a new tab.
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)
* http://kb.mozillazine.org/browser.link.open_newwindow (3) -
Does anybody know how to change the title of your podcast on iTunes and the description of it?
I was working on my feed site and when the podcast popped up on iTunes I realized that I put the wrong info and title on it. Anybody know?
You change the title and descriptions by entering the changed versions in wherever you originally entered the items in whatever system you are using to create your feed, then re-publish the feed; it will take the iTunes Store a couple of days or so to catch up.
However, if the method you are using to create your feed is one of those which uses the title of the podcast as part of the URL, and this changes if you change the title, then if you change the URL as a result the iTunes Store will lose contact with it and fail to update in future: so be careful about this. -
Does anyone know how I can change original e-mail / user ID on the iPad II itself? On the website, I can use new email/user ID and password; but NOT on the iPad!? Thanks for any assistance.
Hi,
In order to fix the problem regarding Adobe ID you can follow the steps as suggested below.
1) Open Adobe Digital Editions and connect your Reader
Press the keys Ctrl + Shift + E on your keyboard.
Now a Deauthorize screen will come up asking you to deauthorize your Reader.
Follow the screen instructions and unauthorize the Reader.
Now Press the keys Ctrl + Shift + D on your keyboard.
Now a Deauthorize screen will come up asking you to deauthorize your Computer.
Follow the screen instructions and unauthorize the computer.
Click Start>>Run and Type "Regedit" without quotes in the box
A window will open with name Registry Editor
Search for ADEPT in given location.
HKEY_CURRENT_USER>Software>Adobe>Adept
Delete the full folder
Now open Digital Editions and it will ask you to authorize enter your New Adobe ID and password.
Now connect your Reader and it will again ask you to authorize enter your Adobe ID and password.
Please Note : Your Adobe ID and password which you are entering while authorizing your Reader should match with the ID which you are using with Adobe Digital Editions.
Now for your second problem that your Reader is not getting recognized by your computer I would suggest you to contact sony support in order to fix it. They might have some firmware update for your Reader.
I hope this will help you!!!
Regards
Rizwan -
Anybody know how to change your MSDN account phone number?
The phone number used when my MSDN account was established is no long a valid (non-working) number. I want to start using the MSDN Azure benefit but to activate it requires it to send you a text or get a call at the phone number on you account. I've
search all over my profile and can change my email address, time zone, country, language, yada, yada, yada, but nowhere have I found a way to change the phone number.
Does anyone know where to go or how to change the MSDN account phone number?
Eternally grateful,
Frustrated in Phoenix
Pretty sure what you're looking for F-I-Ph is at https://account.microsoft.com. I see a "phones" tab on my version of that page.
Thanks,
Mike
MSDN and TechNet Subscriptions Support
Did Microsoft call you out of the blue about your computer?
No, they didn't. -
Does anybody know how to change a backup password when original is unknown?
I recently upgraded from a 3Gs to a 4, and i backed up my 3Gs but its password encrypted and i never set up a password, how do i go about changing the encryption password when i dont know the original password?
If the part you can see is enlarged, double-tap with THREE fingers. Then go to Accessibility Settings and turn off Zoom.
-
Can anybody help? Thx
System Preferences: Trackpad has the switch you need.
Having said that I've already got used to the change since this morning's install! -
How to Change Applet Windows Title in EBS 11.5.10.2?
Dear All, would like to check How do I change the Applet Form Windows Title in EBS 11.5.10.2?
Thanks.Hi,
Anybody know how to change the wording in the red rectangle part ?Check my previous reply, it answers your question (login to System Administrator responsibility and navigate to Profile > System, search for the profile name, and change it at the Site level).
Regards,
Hussein -
Know how to change the outline shape of a tooltip?
Hi All,
I was wondering if anybody knows how to change the shape of a tooltip popup box?
I've implemented my own UI delegate for ToolTipUI and overridden the paint( Graphics g, JComponent c ) method which I thought would have allowed me to completely control the rendering of the tooltip, box and all. But what I discovered was that even when I did nothing inside this method, the rectangular popup window was still appearing (I stepped through the code, and the correct instance of UI was being used, not the one that may have been defined by UIManager.set( "ToolTipUI", "foo.Bar" )) After a little more investigation, I ended up in ToolTipManager.showTipWindow() which eventually calls
PopupFactory popupFactory = PopupFactory.getSharedInstance();
tipWindow = popupFactory.getPopup(insideComponent, tip, location.x, location.y);
tipWindow.show();To try to overcome this, as a test I extended JButton with the following constructor:
public TestButton() {
super();
setUI( new MyCustomUI() );
ToolTipManager.sharedInstance().unregisterComponent( this );
}but this didn't solve the problem either. Has anybody got any ideas on this?
Cheers,
Paul.Try this.
regards,
Stas
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.awt.geom.*;
public class Test {
JScrollPane scroll;
JPanel p=new JPanel(new BorderLayout());
Robot robot=new Robot();
public Test() throws Exception {
final JFrame frame=new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.getContentPane().add(p);
JButton b=new JButton("Test balloon!");
b.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
TransparentFrame frame1=new TransparentFrame();
int x=frame.getX()-100;
if (x<0) x=0;
int y=frame.getY()-100;
if (y<0) y=0;
frame1.setBounds(x,y,100,100);
frame1.createBalloon();
frame1.setVisible(true);
frame.getContentPane().add(b);
frame.setBounds(200,200,120,50);
frame.show();
public static void main(String[] args) throws Exception {
new Test();
class TransparentFrame extends JWindow {
Robot robot;
BufferedImage screenImg;
Rectangle screenRect;
MyPanel contentPanel=new MyPanel();
boolean userActivate=false;
Area Balloon;
public TransparentFrame() {
super();
createScreenImage();
contentPanel.Balloon=Balloon;
this.setContentPane(contentPanel);
this.addComponentListener(new ComponentAdapter() {
public void componentHidden(ComponentEvent e) {}
public void componentMoved(ComponentEvent e) {
resetUnderImg();
repaint();
public void componentResized(ComponentEvent e) {
resetUnderImg();
repaint();
public void componentShown(ComponentEvent e) {}
this.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
public void windowClosed(WindowEvent e) {
public void windowOpened(WindowEvent e) {
public void windowIconified(WindowEvent e) {
public void windowDeiconified(WindowEvent e) {
public void windowActivated(WindowEvent e) {
public void windowDeactivated(WindowEvent e) {
Balloon=null;
protected void createScreenImage() {
try {
if (robot==null)
robot=new Robot();
catch (AWTException ex) {
ex.printStackTrace();
Dimension screenSize=Toolkit.getDefaultToolkit().getScreenSize();
screenRect=new Rectangle(0,0,screenSize.width,screenSize.height);
screenImg=robot.createScreenCapture(screenRect);
public void createBalloon() {
Rectangle bounds=new Rectangle(0,0,getWidth(),getHeight());
Balloon=new Area(new Rectangle(bounds));
System.err.println(Balloon.getBounds());
RoundRectangle2D content=new RoundRectangle2D.Double(0,0,getWidth(),getHeight()/3,20,20);
Polygon polygon=new Polygon(new int[] {20,getWidth()/2,getWidth()},new int[] {getHeight()/3,getHeight()/3,getHeight()},3);
Area a=new Area(new Rectangle(bounds));
a.subtract(new Area(content));
a.subtract(new Area(polygon));
Balloon.subtract(a);
contentPanel.Balloon=Balloon;
public void resetUnderImg() {
if (robot!=null && screenImg!=null) {
Rectangle frameRect=getBounds();
int x=frameRect.x;
contentPanel.paintX=0;
contentPanel.paintY=0;
if (x<0) {
contentPanel.paintX=-x;
x=0;
int y=frameRect.y;
if (y<0) {
contentPanel.paintY=-y;
y=0;
int w=frameRect.width;
if (x+w>screenImg.getWidth())
w=screenImg.getWidth()-x;
int h=frameRect.height;
if (y+h>screenImg.getHeight())
h=screenImg.getHeight()-y;
contentPanel.underFrameImg=screenImg.getSubimage(x,y,w,h);
class MyPanel extends JPanel {
BufferedImage underFrameImg;
Area Balloon;
int paintX=0;
int paintY=0;
public MyPanel() {
super();
setOpaque(true);
public void paint(Graphics g) {
super.paint(g);
protected void paintComponent(Graphics g) {
super.paintComponent(g);
g.drawImage(underFrameImg,paintX,paintY,null);
if (Balloon!=null) {
g.setColor(Color.yellow);
((Graphics2D)g).fill(Balloon);
g.setColor(Color.red);
g.drawString("Balloon test!",10,20);
} -
How to change the Window Title on a per build spec basis?
I would like to be able to make 4 "build specificiations" against the same Startup-VI and be able to have the Window Title different in each of the output executables. I know how to change the Window Title for the VI itself, but for some reason, I don't see the ability to override this information in Source File Settings --> Customize VI Properties dialog of the build specification. Is there perhaps a way to do this programattically with VI server? Perhaps there is a way I can define a unique symbol on each of the build specs and then do a case statement in code to determine which title to display based on the symbol that was defined?
Thanks,You can use the appropriately named Window Title property. In your project you can define conditional disable symbols (right-click on the project node and select Properties) and then use a conditional disable structure in your code. However, these symbols apply to the entire project, not to a specific executable. Thus, a better route would be to use the executable name (also accessible via a property), if possible, or some other distinction between the executables. What makes the executables different?
-
Anybody know how to make Epson iPrint work on ios6? Epson told me to use AirPrint, which stinks because you cannot change printer settings.
Epson needs an update to their app to support ios6. I'm sure they will in time.
Try deleting it and re download it. If that doesn't work, it's what I said above. :( -
Does anybody know how to get a scroll bar for a long list of podcasts when selcting some for sync? Thanks
Hi lbadek
I can help with this please send us an email using the contact the mods link in my proifle and we will investigated from there.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
Maybe you are looking for
-
Live!Cam Voice: video but no sound
I've installed the Live!Cam Voice, updated the driver too but I cannot get it to work. I does record the video, but there's no sound. I've checked the sound settings both on the Live!Cam and windows. The Live!Cam settings are set to record using Live
-
Hi, We can't open webi documents on BO XI 3.0. We have the following error message : com.businessobjects.wp.om.OMReportElementContainer (Error: INF) But we can open deski documents through infoview. Any ideas ?
-
Hi, I need to create a business system called ERT which is a sap R/3 system. As we are using XI 3.0, please do provide the steps. Moreover, once we create the technical and business system, how do we actually test it without running an scenario. Rega
-
RPC fails through 881 Point to point Tunnel for VEEAM
Hi I have inherited 2 881's We are setting up a Veeam server to Replicate a Hyper-V host. When I try and add the remote hyper-v server through the P2P VPN VEEAM comes back with an error. "Unable to connect via WMI". WMI is enabled on the target serve
-