Anybody know how to make the upgrade kit remote work with Vi

I have a X-Fi extreme music & an upgrade kit.{ remote & receiver} The remote will allow me to select music tracks under the the entertainment center, but will not control the volume. I can push +-or - volume all day long, but it always says 00% and dosn't change in intensity. Any Ideas?

Hi
I take it you have used the youp-pax software? If not, then do so. Install revision 2. I did this and my remote is fully working once more.
Must admit I am a little annoyed creative did not provide a link to youp-pax for people wanting to update their drivers. They could have said it was use at your own risk etc, but instead I had to waste two weeks fiddling with vista until I discovered it.
/rant off

Similar Messages

  • Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

    Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

    In YAMAHA01v96i:
    Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
    Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
    Save again the scene overwriting the old one.
    in LOGIC
    Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
    That's more or less it.
    It worked for me...so far

  • Anybody knows how to make the Garmin GPSMAP 62s with the Apple computer MAC Mountain Lion OS X

    Does anybody know how to communicate the iMac with the GPS62s from Garmin? The Plugin from Garmin cannot be open by iMac.

    The Communicator plugin for web browsers ?
    if so, describe happens when you attempt to install it.

  • Does ANYBODY know how to get a Bluebird Mic to work with GarageBand?

    I bought this really expensive Blue Bluebird condenser mic and I'd REALLY like to get it to work with GarageBand. I have a cable that converts from low impedance to high impedance, then some adapters to plug the cable into my iMic, which then connects via a USB port. I know that's a lot of connectors, but it's the only way I can think of to turn the Bluebird mic into a USB mic. Can anybody help me with this? PLEASE??

    that looks, uh, complicated.
    none of it should be any more so than your current setup. if you went the interface route it would be Mic to interface interface to computer (USB or FireWire). if you went the analogue console route it would be the same, but into the iMic or Line-n on the computer
    so I would need a female to male mic cable
    standard mic cable, it's how they usually come.
    Also, do you recommend the external Phantom Power supply, or a new interface?
    that reaches more toward opinion, and also why i mentioned never using a separate power supply. you have to weigh cost vs quality (basically, what you expect from your final project).
    if it's just for kicks, and your iMic's quality satisfies you, $20 for a power supply seems cost effective. if you're looking to reach the quality of recordings you hear on the radio, a better interface would be the right choice now since you'd wind up there eventually.
    the in-between is the analogue console. having a mixer between the mic and the iMic definitely gives you more control since you can boost or attenuate the signal going to the iMic.
    so the 3 choices you have would be: Power Supply-least quality, least control. Analogue Console-same quality, much more control. more expensive interface-possibly the best quality recording as well as good control.
    since you picked a very good mic, i'd suggest looking toward a good interface like the FireBox (great Mic PREs for the expensive mic)
    hope that helps

  • How to Make the Win7 Enterprise ISO work with Boot Camp?

    Hey...
    So I've acquired a new MBA. I didn't really want to considering all the issues out there (of which so far the volume fluctuation issues applies to me as well), but on Friday I need to bring some kind of laptop with me on a trip to record a song for a wedding next month. And for that, to make it worse, I need Winblows.
    So I got the Windows 7 Enterprise evaluation ISO. I let Boot Camp modify it and write it to a USB stick.
    But when I boot into the thing, I never get to actually install Windows, because I get "Install Windows": "Windows Setup encountered an internal error while loading or searching for an unattend answer file."
    What to do??!?!!

    Hmmm... That's strange!
    Seems there are some differences between DVDs for Windows 7 that the Apple tool doesn't know how to handle?
    The image I used to install with was the "7600.16385.090713-1255_x64fre_client_en-us_OEM_Ultimate-GRMCULXFREO_EN_DVD.iso " one — I believe I downloaded this from Microsoft at some point when they had it up for developer trials or something?
    The MD5 sum of that image is dad9f7a0b4d5d928a6a67ba6cd896350. You can check yours in Terminal by writing "md5 <path to your image file>".
    Perhaps if yours is different, you can find that other image online somewhere.
    HTH

  • How to make the Access Gate SDK work with Web Gate

    When we want control the display of one area in one page, we can define this area as one resource then control the access of it. But when the user has been authenticated in the application, how can we get the user session and then call Access Gate SDK to check if the user is authorized? The following is one utility class to archive it.
    * $Id: CreateUserAction.java,v 1.1 2005/10/11 23:19:34 jason Exp $
    * $Revision: 1.1 $
    * $Date: 2005/10/11 23:19:34 $
    * Copyright (C) 1972 - 2005, Oracle Co. All Rights Reserved
    * The program(s) herein may be used and/or copied only with
    * the written permission of Oracle Co. or in accordance with
    * the terms and conditions stipulated in the agreement/contract
    * under which the program(s) have been supplied.
    package oblix.view;
    import com.oblix.access.ObAccessException;
    import com.oblix.access.ObConfig;
    import com.oblix.access.ObResourceRequest;
    import com.oblix.access.ObUserSession;
    import javax.servlet.http.Cookie;
    import javax.servlet.http.HttpServletRequest;
    * @author zhoujian
    public class OblixUtil {
    private static String ObSSOCookie = "ObSSOCookie";
    private OblixUtil() {
    * Check if the user is Authorized
    * @param request
    * @param rescourceUrl
    * @return
    public static boolean isAuthorized(HttpServletRequest request,
    String rescourceUrl) {
    return isAuthorized(request, "http", rescourceUrl, "GET");
    * Check if the user is Authorized
    * @param request
    * @param resourceType
    * @param rescourceUrl
    * @param resourceMethod
    * @return
    private static boolean isAuthorized(HttpServletRequest request,
    String resourceType, String rescourceUrl, String resourceMethod) {
    try {
    ObConfig.initialize();
    ObResourceRequest resource = new ObResourceRequest(resourceType,
    rescourceUrl, resourceMethod);
    ObUserSession session = getObUserSession(request);
    return session.isAuthorized(resource);
    } catch (ObAccessException oe) {
    oe.printStackTrace();
    ObConfig.shutdown();
    return false;
    * Get the Oblix user session from the request.
    * @param request
    * @return
    * @throws ObAccessException
    private static ObUserSession getObUserSession(HttpServletRequest request)
    throws ObAccessException {
    String token = getCookieValueByName(request.getCookies(), ObSSOCookie);
    if (token != null) {
    return new ObUserSession(token);
    return null;
    private static String getCookieValueByName(Cookie[] cookies, String name) {
    for (int i = 0; i < cookies.length; i++) {
    if (cookies[i].getName().equalsIgnoreCase(name)) {
    return cookies[i].getValue();
    return null;
    }

    Couple of options. You seem have to taken the Access Gate based approach. I will throw this in any way and you can make a call which one you want to use.
    If its a web application you can control authorization based on Resource by defining policy in the Access Manager.
    You mentioned aout display of one area in one page. That should be driven off of User attribute or custom logic. If it is driven off of User attribute then you can return header variable and you can check in the code as opposed to writing custom access gate.
    Now if you do want to write custom access gate when the resource is already protected by a Web gate,
    you can get the ObSSOCookie from the users browser session.
    You can pass the URL to the IsAuthorized method and call.
    Now here you have to install the Access Server SDK on the server, create custom access gate and then write the code and deploy it on that server.
    THanks
    Ram

  • How to make the rating/flagging feature work with impromptu slideshow?

    I have LR 5.2 and when I review newly imported images with an impromptu slideshow to rate and flag the image in the slideshow, the relevant "flag as pick" or "set as rejected" notification shows on the screen but at the end of the slideshow only the first image is picked or rejected and the rest remain unchanged.
    I have tried the fix that adobe published for 5.0 - changing the ui.dll but that fix prevents LR5.2 from loading alltogether.
    Any suggestions please?

    FurryHerbington wrote:
    I have tried the fix that adobe published for 5.0 - changing the ui.dll but that fix prevents LR5.2 from loading alltogether.
    the ui.dll is for 5.0 only, not compatible with 5.2, and since the fix was incorporated in 5.2, ui.dll is no longer needed.
    Unfortunately, I can't help with the pick flags - they sorta work on my copy, but slideshow has been so problematic for me for so long that I just don't use it. In the tests I just did for you to check the pick flags - first test: the pick flags did not work correctly (behavior as you stated), the rest of the tests the pick flags worked properly, but something else didn't. e.g. which monitor was used changed between tests, and the manual slideshow became automatic at full speed. In all tests the color/tone are off.
    Lr's impromptu slideshow is useless for me - made worse over time, not better.
    Sorry I've not been more help, but that's all I got...
    PS - I use ShowBiz for in-Lr slideshows - has not all the bells/whistles, but at least it works, and it's full-screen (in Lr5) too, which I like.
    Cheers,
    Rob

  • I just upgraded my iPad to ios6. Now my Epson iPrint crashes all the time. I called Epson and they had no answer...said to use AirPrint instead. But AirPrint stinks because you cannot change printer settings. Anybody know how to make iPrint work on ios6?

    Anybody know how to make Epson iPrint work on ios6? Epson told me to use AirPrint, which stinks because you cannot change printer settings.

    Epson needs an update to their app to support ios6. I'm sure they will in time.
    Try deleting it and re download it. If that doesn't work, it's what I said above. :(

  • Does anybody know how to get the license for Adobe LiveCycle if i dont have the installation disk?

    Hi,
    I no longer have the installation disk for Adobe LiveCycle and i need to install it onto a different PC due to upgrading hardware etc... Does anybody know how to recover the licence for the version of Adobe LiveCycle we have? Can it be found in the registry or anything?
    Thanks.

    Sorry, but Apple does not provide technical support via email, so they have no published email addresses. You will need to find a way to call them. Or make an appointment with the Genius Bar at an Apple Store, if there are any near you, and have them follow up.
    Regards.

  • Hello guys..does anybody know how to install and use adobe master collection with the new lion?   I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...   I am a new mac users and I'd like t

    Hello guys..does anybody know how to install and use adobe master collection with the new lion?
    I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
    I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

    Lab79 wrote:
    Are you on Apple's payroll?
    well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
    good luck with apple dude..
    Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
    And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
    <The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
    Great suggestion. You should go with that one, but good luck getting a refund.
    Bye

  • Anybody know how to fix the audio while watching movies on first generation apple tv?

    Anybody know how to fix the audio while watching movies on first generation apple tv? On my apple tv, I can hear audio for music, music videos, youtube, internet radio and even movie previews! But..... when I pay for the rental download of a movie there is no audio - just visuals. I am connecting with hdmi. When I connect an apple tv 2nd generation to the same amp and tv, using same hdmi and even same power lead and same settings then there is no problem! Anybody know how I can get audio to work for movies for this?

    that makes sense and good point but no don't think so. Where would I check that setting? I had same problem on my next gerneration apple tv (black model) but when I switched off the dolby then I could hear movie. In this case that does not work for the first generation (white) apple TV I have whether dolby is on or off. I have never been able to watch a movie using it.

  • HT201270 MORNING COMMUNITY, anyone know how to make the i4s forget a network - when the device won't give you that option?

    MORNING COMMUNITY, anyone know how to make the i4s forget a network - when the device won't give you that option?

    if you dont have the options to forget network you can reset your network settings, but than the device forget all networks
    settings > general > reset > reset network settings

  • Installed Yosemite and now lost apps and also my App Store does not open. Does anybody know how to fix the problem?

    Some weeks ago, I installed OS X Yosemite, as shown on my App Store, that was a "System Update available for my IMac 2009". Followed all the steps, normally and installed it as I did many other times ago (with the Maverick, Mountain Lion, OS X).
    Just after the installation, I noticed that every single folder or program that depends on "Apple", stopped working.
    Examples: Office package opens normally, so as Firefox. But, IPhoto, ITunes, Safari and App Store itself do not.
    That is causing me fear, because even trying to reinstall Yosemite or return to the one I had before, using App Store became impossible. Even the "Apple Icon" on the top left corner does not work. I click, it flashes, just IF it was ready to open, but nothing happens, seams that have something stopping the "loading process" of the softwares.
    Does anybody know how to fix the problem, please?
    Thanks in advance. Regards.

    Thanks for your attention.
    I Tried before, but the Mac App Store was not responding either, and worse, after 5 years, There is no free phone support
    I ended up solving it by reinstaling the Yosemite pressing "comand + R"
    thanks anyway
    Regards

  • Hi  does anybody know how to change the language of interface in demo version illustrator CC

    Hi  does anybody know how to change the language of interface in demo version illustrator CC ?

    It doesn't help. I will try to download again illustrator
    Отправлено из мобильной Почты Mail.Ru
    Понедельник, 9 марта 2015 г., 18:36 +0300 от Mylenium  <[email protected]>:
    Hi  does anybody know how to change the language of interface in demo version illustrator CC created by  Mylenium in  Downloading, Installing, Setting Up -  View the full discussion

  • Does Anybody Know how to make Safari 3 Faster?

    Does Anybody Know how to make Safari 3 a little bit faster for WIndows?

    Come on does anybody know plzz?

Maybe you are looking for