Anybody know how to return the old software of my...

I used to update the software of my E65 phone. It was in Italian language. The phone software update was finish but I found out that the language was change to English. I checked my phone setting but there was no Italian language there. Can i possibly change or return it as it was before? Or is there other way to return the old software in my mobile phone?

You cannot return to a previous version of firmware but I do believe that you can load a language pack for the phone. Perhaps have a look in the communicators forum and see if there is any help on doing that. If all else fails you can take the phone to a Nokia Service Center and ask them to do it for you.
/discussions/board?board.id=communicators
Knowledge should be your Advisor when you need help.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

Similar Messages

Installed Yosemite and now lost apps and also my App Store does not open. Does anybody know how to fix the problem?

Some weeks ago, I installed OS X Yosemite, as shown on my App Store, that was a "System Update available for my IMac 2009". Followed all the steps, normally and installed it as I did many other times ago (with the Maverick, Mountain Lion, OS X).
Just after the installation, I noticed that every single folder or program that depends on "Apple", stopped working.
Examples: Office package opens normally, so as Firefox. But, IPhoto, ITunes, Safari and App Store itself do not.
That is causing me fear, because even trying to reinstall Yosemite or return to the one I had before, using App Store became impossible. Even the "Apple Icon" on the top left corner does not work. I click, it flashes, just IF it was ready to open, but nothing happens, seams that have something stopping the "loading process" of the softwares.
Does anybody know how to fix the problem, please?
Thanks in advance. Regards.

Thanks for your attention.
I Tried before, but the Mac App Store was not responding either, and worse, after 5 years, There is no free phone support
I ended up solving it by reinstaling the Yosemite pressing "comand + R"
thanks anyway
Regards

Can't back up my Iphone5 to my macbook pro, it tells me it may be corrupted, also I don't know how to delete the old backup to redo it

Can't back up my Iphone5 to my macbook pro, it tells me it may be corrupted, also I don't know how to delete the old backup to redo it

Hi Caveman337,
Welcome to the Support Communities! The resource below will explain how to delete an old iTunes backup. Before you do this, I would suggest creating an iCloud backup of your iPhone.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
http://support.apple.com/en-us/HT203977
Back up using iCloud
If you're using iCloud, it can automatically back up your content. Use these steps to turn on iCloud Backup:
Tap Settings > iCloud > Backup. If you're using iOS 7 or earlier, tap Settings > iCloud > Storage & Backup.
Tap iCloud Backup to turn it on.
Tap Back Up Now.
After you turn on iCloud Backup, iCloud will back up your content automatically. You can return to this screen to see when the last back up happened.
Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
http://support.apple.com/en-us/ht4946
Where your backups are stored
The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
Delete a backup
If you want to delete a backup created by iTunes:
Open iTunes Preferences:
Mac: Choose iTunes > Preferences.
Windows: Choose Edit > Preferences. Learn how to turn on menus in Windows 7 and 8.
Click Devices. (The iOS device doesn't need to be connected.)
iTunes will show the phone number, International Mobile Equipment Identity (IMEI) number, and serial number of the backed up iPhone when you position your mouse pointer over a backup. (Only the serial number will be shown for iPad and iPod touch). You can use this to find the backup you want to delete.
Select the backup you want to remove.
Click Delete Backup.
When prompted, confirm that you want to remove the selected backup by clicking Delete Backup.
Click OK to close the iTunes Preferences Window.
Backups that have a date and time stamp in the backup name are copies of backups created by restoring the iOS device. The date and time in the left column are when the restore-from-backup occurred. The date and time in the right column are the last synced date; this shows how current the data is.
I hope this information helps ....
- Judy

Hi does anybody know how to change the language of interface in demo version illustrator CC

Hi does anybody know how to change the language of interface in demo version illustrator CC ?

It doesn't help. I will try to download again illustrator
Отправлено из мобильной Почты Mail.Ru
Понедельник, 9 марта 2015 г., 18:36 +0300 от Mylenium <[email protected]>:
Hi does anybody know how to change the language of interface in demo version illustrator CC created by Mylenium in Downloading, Installing, Setting Up - View the full discussion

Anybody know how to fix the audio while watching movies on first generation apple tv?

Anybody know how to fix the audio while watching movies on first generation apple tv? On my apple tv, I can hear audio for music, music videos, youtube, internet radio and even movie previews! But..... when I pay for the rental download of a movie there is no audio - just visuals. I am connecting with hdmi. When I connect an apple tv 2nd generation to the same amp and tv, using same hdmi and even same power lead and same settings then there is no problem! Anybody know how I can get audio to work for movies for this?

that makes sense and good point but no don't think so. Where would I check that setting? I had same problem on my next gerneration apple tv (black model) but when I switched off the dolby then I could hear movie. In this case that does not work for the first generation (white) apple TV I have whether dolby is on or off. I have never been able to watch a movie using it.

Hi there,I was using MacPro with older snow leopard just now i install OS X LION,before install i backup all deta to time machines about 70GB,now when i connect i dont know how can backup the old deta to OS X LION,but it just backup the recent deta to tim

Hi there,
I was using MacPro with older snow leopard just now i install OS X LION,before install i backup all deta to time machines about 70GB,now when i connect i dont know how can backup the old deta to OS X LION,but it just backup the recent deta to time machine,pls guide me how i can backup my old deta to my computer??
Will be much appreciated !!
Thanks.

>Step 1. Backup existing data using time machine.
Time Machine is nice, but you have very little in terms of ability to verify that your data is all backed up. I find Time Machine is better for the occasional recovery of previously written data at specific times. A good backup solution that survives an erase and install (there is no clean install in Mac OS X), is a clone, and preferably TWO clones. See my FAQ*:
http://www.macmaps.com/backup.html
Time Machine can work as good as a clone, and in fact I once had to rely on it because my hard drive died. Thankfully it did recover everything. But I had my clone just in case it didn't work. Now I feel more comfortable since clones allow you to boot themselves, and thus prove all the important system information got saved, and not just the user data.
Clones are also easier to import with the migration assistant.

Does anybody know how to get the license for Adobe LiveCycle if i dont have the installation disk?

Hi,
I no longer have the installation disk for Adobe LiveCycle and i need to install it onto a different PC due to upgrading hardware etc... Does anybody know how to recover the licence for the version of Adobe LiveCycle we have? Can it be found in the registry or anything?
Thanks.

Sorry, but Apple does not provide technical support via email, so they have no published email addresses. You will need to find a way to call them. Or make an appointment with the Genius Bar at an Apple Store, if there are any near you, and have them follow up.
Regards.

Anybody knows how to make the Garmin GPSMAP 62s with the Apple computer MAC Mountain Lion OS X

Does anybody know how to communicate the iMac with the GPS62s from Garmin? The Plugin from Garmin cannot be open by iMac.

The Communicator plugin for web browsers ?
if so, describe happens when you attempt to install it.

Anybody know how to get the clock working properly!

:x The stupid dumb blankety blank clock won't stabilize. Every time I reboot it changes. A petty little problem, but I bet somebody knows how to fix it.
In rc.conf I have hardwareclock set to "localtime" and timezone set to EST. In kde if I open Adjust Date & Time it's set to utc? Should I change rc.conf to UTC?? I just tried to adjust the clock and it would'nt
adjust at all. Anybody know how to fix this? -- Thanks - Larry
I changed timezone to America/NewYork, instead of EST, they're both listed in usr/share/zoneinfo, and then left the fields in the Adjust Date & Time blank. It seems to be working, but what is the correct method?

I have come to love htpd from freshmeat. Instead of accessing a timeserver it uses any old website. My clock is 3 seconds out on boot and it adjusts for that immediately then it checks every 12 hours. That may not suit everybody and those people would probably choose adjtime which calculates a slew rate and then brings your clock into synch with whatever atomic timeserver you nominate. However htpd is simple and it works. I use my ISP port 80.

I just watched a Netflix movie using my iPad 2. Now I need to know how to return the movie using my iPad 2 and deleting the movie from my queue?

I just watched a movie using my iPad 2. Now I need to know how to return and delete the movie from my Netflix queue and account using the iPad 2?

Perhaps this question would be better answered here:
http://www.netflix.com/Help

Does anybody know how many seconds the Cross Fade is on an iPod Nano 4/5th Generation?

In Settings > Playback > Audio Crossfade - when you turn this to 'On' does anyone know how many seconds the crossfade is for?
I can't find anything online, it's not in the iPod manual and no-one at my local Apple Store knows!

It depends on how long the song(s) is.
For example: I listen to On My Level by Wiz Khalifa and the song last for 4:35 so at the last 6-3 seconds it will crossfade to the next song and you'll missout of the first few seconds of the next song.
Message was edited by: keeferaf

Does anybody know how to change the title of your podcast on iTunes and the description of it?

I was working on my feed site and when the podcast popped up on iTunes I realized that I put the wrong info and title on it. Anybody know?

You change the title and descriptions by entering the changed versions in wherever you originally entered the items in whatever system you are using to create your feed, then re-publish the feed; it will take the iTunes Store a couple of days or so to catch up.
However, if the method you are using to create your feed is one of those which uses the title of the podcast as part of the URL, and this changes if you change the title, then if you change the URL as a result the iTunes Store will lose contact with it and fail to update in future: so be careful about this.

Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

Hi,
I have two ISE-3315 Appliances in production network.
I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
And then I would like to know how to keep the license files and Certificate during the Upgrade.
Please help me to answer my questions.
Thanks
CSCO11872447

The Cisco Identity Services Engine (ISE) provides distributed deployment of runtime services with centralized configuration and management. Multiple nodes can be deployed together in a distributed fashion to support failover.
If you register a secondary Monitoring ISE node, it is recommended that you first back up the primary Monitoring ISE node and then restore the data to the new secondary Monitoring ISE node. This ensures that the history of the primary Monitoring ISE node is in sync with the new secondary node as new changes are replicated.
Please Check the below configuration guide for Secondary ISE- Nodes.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

Does anybody know how to export the events log from a IPS 4260 ?

My company has a Cisco IPS 4260 and we used to get the log from the Cisco Security Manager but since July the software failed and now (December) I need to get / export the log from July to December that I think it is saved into the IPS. Is it possible? Does anybody know the command to see the saved log or the commands or procedure to export the log into a TFTP or FTP ?
I'll really appreciate your help, thanks.

No; That cannot be done. Only through a SDEE server.
Events are stored on a hard drive that the IPS has, if it has not been reloaded they should be there with no issues.
Get the application "IME". If I am not mistaken, you would be able to see those events there and I think there is a way to export them from there.
Mike Rojas

Does anybody know how to modify the driver for the Tektronix 370A curve tracer so that it will work with the 370B?

I am trying to control a Tektronix 370B curve tracer using LabView via a GPIB interface. However, there are no drivers available for download for the 370B. There is one available for the 370A, but it is not compatible with the 370B and I have been unable to figure out how to modify it to make it work with the 370B. Does anyone know how to modify this driver, or know of an existing driver that works with the 370B? Thanks!

Hi S _Bracht,
Yeah, unfortunately, the Tektronix 370B does not currently have an instrument driver and the driver for the 370A is not supported by National Instruments (it is just posted on our website as a courtesy) - so I am afraid that there is not really any more information on the differences that might exist between the two available from National Instruments. As an alternative, you can always develop your own driver using the VISA and 488.2 drivers + a copy of the user manual for the Tektronix 370B. Otherwise, you may consider speaking with Tektronix or getting ahold of a User Manual for the 370A and comparing some of the settings - there are likely some differences in your configuration options at the very least. Or, if someone out there has tackled this before and shares their knowledge...
Good luck!
Regards,
Anna M.
National Instruments

Anybody know how to return the old software of my...

Similar Messages

Maybe you are looking for