Anybody know if there's a way to find out when you last backed up your icloud?

Trying to decide if I should restore from iTunes or iCloud...any way to find out which back up was more recent?

Go to Setting>iCloud>Storage & Backup. The date/time of the most recent backup is listed at the bottom under Back Up Now.

Similar Messages

Does anyone know if there's any way to find out what files in my Library

Does anyone know if there's any way to find out what files in my Library I can delete? I just cleaned off my HD onto a media drive as a back up so all my movies documents and photos are gone but my Library seems to be a huge space hog eating sixty gigs of space and I do have alot of apps but they don't take up a third of that space... Any ideas how I can figure out what is wasting all this space? I had Spring Cleaning once but found it to be rather confusing as to what was essential to the OS and what not...
Thanks,
Matt

Get free OmniDisk Sweeper. I can't imagine how you could have sixty GB in that folder. My entire ~Library isn't even 1GB. Are you sure you're not talking about your entire Home folder?
Can you post a screenshot of the contents of that folder.
Check again. Are you sure you moved all the Movies etc. out? Could have left duplicates of everything behind when you did this.
Message was edited by: WZZZ

Hello i lost my iPhone like 12 days agoi already check in iclouds but appears offline i want to know if there is another way to find it thank you !!!

please help

stepheniefromhouston wrote:
What I need to know is there any other way how to track that iphone using the serial number? I always have a passcode for 1 minute on it, so I am sure it was locked when I lost it. I hope someone can give me a valuable answer. Thanks!
Technically, the phone CAN be tracked using the "serial" number, but no one will do that for you. If your phone is offline, there's no way of reaching it. Most likely, it's already been restored and either put up for sale on eBay, or is being used by the theives themselves.
Sorry, but there's nothing else you can do other than report it to your carrier, the police, and change all your passwords to any account that might have been in use on the phone.

Does anybody know if there is a way to import 2 movie files in logic....

Does anybody know if there is a way to import 2 movie files in logic....I am getting 2 files in an hour and i need to figure out how 2 combine 2 mov. files into logic to put them together in dvd...i am doing a score.....thanx

As far as I am aware no the only work around is that you create 2 quick time movies import them into one session of imovie then export as a quick time file which yu would then import into Logic hope this helps

I downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.

i downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.

The face detection used in the camera jut isnt for me.
Try a different camera app. Camera Plus is a good one and there are many others.

Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?

Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?

Many thanks Deggie! I think my iPad has a big problem because is not possible to restore it....I downloaded the most upgraded version of iOS but when I try to restore an error message occurs (4005)......

Is there an easy way to find out if a user has a message in their voicemail.

Is there an easy way to find out if a user has a message in their voicemail from the
UNITY subscriber page? Or anywhere I can look to see if they do. I don't have access to the exchange servers. We are currently running UNITY 5.0(1). thanks

The only way you'll be able to do that is to login to Outlook Web Access, or possibly setup an IMAP client to that user's mailbox or have TAC run the DohPropTest in attach mode to return the contents of the user's inbox. If the first two don't work, I'd go with the latter and let TAC help you verify if there are any messages in the inbox that are unread.
Hope that helps,
Brad

HT204396 I forgot my restriction pass code anybody knows if there is another way to turn restrictions off

I forgot my ipad restriction pass code now I can't turn it off or delete or install any new software updates if anybody can help me know if there is another way to turn that feature off?

There is no way. You must restore the device as new. You can only restore a backup you made prior to when you put the restriction code in place.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Dba_jobs - any way to find out when a job was first submitted?

Hello Experts.
I am trying to find out when a couple of jobs I have found via dba_jobs were first submitted.
Is there a table / view to check for this?
10.2.0.5.0
Linux RHEL 6.

869150 wrote:
Hello Experts.
I am trying to find out when a couple of jobs I have found via dba_jobs were first submitted.
It depends.
DBMS_LOGMNR could provides desired details.
Is there a table / view to check for this?NO.
>
10.2.0.5.0
Linux RHEL 6.

Anybody know if there is a way to ....

Output sms text messages to an email or other text document? I doubt there is a way to do this via Apple software, but maybe someone knows of a little 3rd party app or widget that can accomplish this?
Thanks!

Not exactly, though the program Syphone will extract them from the backup file.

Is there any other way to find out if your Mac has a virus?

I think antivirus software is the only thing that can tell if you've got trojans and harmful files on your computer, and lists them down. But I want to find out if my Mac has viruses without downloading AV software.

There's no one single method that can be used, as different malware can install in different places. You have to know what you're looking for. The folks who make AV software know what they're looking for, so that's the best option.
However, why do you have this concern? Do you have a reason to believe your Mac is infected? If so, what is it? If not, you can probably relax (though that's far from a guarantee).
For more information on this topic, see my Mac Malware Guide.

Is there no way to find out when Cabinet 80 in E14...

Hello!
About three years ago BT sent out leaflets to all locals at E14 9FP to register their interest in Fibre-optic upgrade for our area. So we all filled them in and where happy to wait. Now POPLAR Exchange has been Fibre enabled for a long time and most Poplar area cabinets have been upgraded (including my other property at E14 6BH that now has Infinity installed). I live in heavy populated area E14 9FP Baltimore Wharf and our Cabinet 80 is still not upgraded. When I e-mailed Openreach about this they sent me a generic copy pasted e-mail that stated lines for their FAQ page that I read before even sending them e-mail in first place and obviously FAQ didn't have any answers for my area because it is generic for ALL UK LOCATIONS. Basicaly they ignored us and did not provide any answers. Also their e-mail said that they will not reply again.
So I'm writing here to try and get some answers to what is actually happening? Is Cabinet 80 under review? Is BT waiting for permission from council? Is it even in plans to upgrade it at all?
We as a community what a solid answer. Even if it is a "No upgrade for you" answer. Then at least we can make peace with it and explore other options(mobile or sottilite internet providers, etc.)
Thank you for your time!
I hope to hear from BT support on this topic soon.
P.S. I also checked at www.btwholesale.com with their Broadband Availability checker and there is no information regarding any plans or dates. Just saying... in case someone whanted to advise me to check there. I tried ALL options available online and over the phone. NO ONE could help me get to the bottom of this.
Solved!
Go to Solution.

This is a BT residential customer to customer forum.
The placing and commissioning of cabinets is done by Openreach and is outwith the control of the ISPs. There are many reasons why a cabinet is not upgraded and the only people who will be able to answer that question is Openreach.
I am surprised that they did not give you more information when you emailed them, unless of course at that time they may not have known what if any problems they may have with upgrading your cabinet.
Email Openreach on [email protected] giving them your cabinet number, exchange,telephone number and address and they should be able to reply with the up to date information. They can take a couple of weeks to reply.
If you as a community don't get an answer from Openreach you may wish to ask your MP about it as this often helps get answers if not necessarily cabinets upgraded.

Is there an easy way to find out if the GPIB/ENET adapter is connected to the computer?

I'm using Component Works for Visual Basic and have no problem with my software on computers with PCMCIA GPIB adapters. The GPIB driver seems to know if the adapter is in the computer or not.
When my software is used on a computer where the GPIB/ENET adapter is not powered on, the software seems to lock up but eventually comes back with an error. Since there doesn't seem to be an easy way to determine if an adapter is present my code just assumes it's there, which doesn't work with the GPIB/ENET GPIB dll. Is there any way I can look for the board before querying for instuments on the bus?

Hello David,
One possible solution would be to ping the ENET box. If you know the IP of the box, a simple ping should immediatly let you know the status of the box.
Best Regards,
Aaron K.
Application Engineer
National Instruments

HT4757 Is there a way to find out when a raw file type will be supported?

I have a Fuji X-Pro1. It hit the market in January/Febrary 2012. It's RAF file is different than the X100 which is supported.
Also- I like to use NITF 2.1. Is there any committment for this format?
Is there a forecast or product roadmap for digital imagery sensors from the different camera makers or does it take inquiries from forums like this to attract product marketing attention?
For those not familiar - The National Imagery Transmission Format (NITF) is a principal standard format for digital imagery, metadata and imagery-related products for the United States, International Standards Organization (ISO), American National Standards Institute (ISO/ANSI) and North Atlantic Treaty Organization (NATO) (STANAG-4545).
The X-Trans sensor of the Fuji, the Foveon sensor of the Sigma, 3-CCD cameras, and a few others do not use the standard 2x2 Bayer (1976) filter on the sensor. And I haven't decomposed the X-Pro1 file set to see how closely it follows the ISO 12234-2, better known as TIFF/EP.
I don't know if this or other collateral RPC metadata are evaluated items by the Apple product managers. This impedance being a possible source of resistance to support new radiometric sensor data profiles and sensor models.

You might want to submit feedback to Apple since we are all users here just like you - that might be the best way to let Apple know.
http://www.apple.com/feedback/

Is there an easy way to find out your Bind Variables?

There are times I get called on a Production Performance problem a little too late. The only way I can trace what happened is by running Statspack reports for an hour or two earlier. But the Top sql comes with bind variables. And without knowing the actual data value it is difficult for us to guess if that is the problematic sql. Is there an way we can find the value for these Bind variables back in time?

What Oracle version are you on?
In Oracle 10g, V$SQL_BIND_CATPURE view provides what you want. But keep in mind that bind capturing in not happening on the fly. When the SQL statement is compiled(hard parse), the bind value is captured. And after Oracle periodically updates the bind value.
If AWR is enabled which is default, you have DBA_HIST_SQLBIND view which provides historical snapshots for V$SQL_BIND_CAPTURE. This may be helpful for you.
Not in Oracle 10g, it's beyond my knowledge. :)

Anybody know if there's a way to find out when you last backed up your icloud?

Similar Messages

Maybe you are looking for