Anybody know the internal implemention of streaming channel in BlazeDS

Client(localhost:4963) -> Server(localhost:8400)
Server half close the connection between localhost:4963 and localhost:8400.
Client(localhost:4964) -> Server(localhost:8400)
Server pushs the message to client via the channel between localhost:4963 and
localhost:8400.
The above flow is from the sample(Publish/Subscribe Messaging (Data Push Use Case).
My question is how to store the channel(4963 <- 8400) after half-closing it? Which code to handle it in the code base?
Thank you

Not really sure what you mean by "half-closing" and the question you're asking. Can you clarify?

Similar Messages

  • Anybody know the maximum channel, concurrent connection limit

    Anybody know the maximum channel that can be set and the maximum concurrent connection that listener can support for WebSphere 6.0 Solaris.
    One more question, please correct if I'm wrong; in order to set above value, I have to modify qm.ini as below:
    TCP:
    Port=1414
    KeepAlive=YES
    ListenerBacklog=800 --------> for maximum concurrent connection that listener supports
    Channels:
    MaxChannels=1000 ----------> for maximum channel for QManager
    MaxActiveChannels=1000
    Every suggestions would be appreciated.

    Not really sure what you mean by "half-closing" and the question you're asking. Can you clarify?

  • Does anybody know the terminal instruction to remove the shadow from screen grab images

    Does anybody know the terminal instruction to remove the shadow from screen grab images?
    I saw it somewhere on some site ages ago
    (I like to align images together and take another screen grab without the darn shadow and without opening another app)

    I found this:
    defaults write com.apple.screencapture disable-shadow -bool true && killall SystemUIServer
    but this soesn't seem to work
    and this
    To get rid of the shadow and only capture the window, enter this line of code in Terminal:
    defaults write com.apple.screencapture disable-shadow -bool true
    Then to implement the change, enter:
    killall SystemUIServer
    To revert the modification and restore shadows, enter:
    defaults write com.apple.screencapture disable-shadow -bool false
    doesn't work either in Mountain Lion

  • Macbook Air failed wifi connection - Does anybody know the solution?

    Macbook Air has been connecting to Wi-Fi network without issue for almost 2 years.
    Haven't been able to find a solution to 'failed Wi-Fi connection' so far.
    Wi-Fi is turned on but is not connected to a network.
    Wi-Fi Settings Failed.
    Have tried trashing:
    Library/Preferences/SystemConfiguration/com.apple.network.eapolclient.configurat ion.plist
    Library/Preferences/SystemConfiguration/com.apple.network.identification.plist
    Networkintefaces.plist
    And restart, but no change.
    Mac OS X Version 10.7.5
    1.6GHz Intel Core i5
    Does anybody know the solution?

    Had restarted the router a few times to no avail.
    Checked out the vendor's website, but wasn't able to find anything of use, -it was limited options wise.
    Nothing in the OS X recommendations for Wi-Fi settings jumped out me.
    I wasn't able to experiment with the band/channel settings.
    I ended up buying a USB/Ethernet adaptor so I could at least have access to the net (5 days ago), -which didn't change the Wi-Fi issue...
    However, after a couple of days without use, I've woken the machine and noticed the Wi-Fi signal at full strength. The network is detected and connected!
    Problem solved ...But how?

  • Does anybody know the error code 11 while updating to ios 4.3.3.? thx

    does anybody know the error code 11 while updating to ios 4.3.3. on an ipad1? thx

    but my hard drive is still lot of spaces...still keep on trying to update...

  • Is there anybody know the meaning of Condition control in pricing?

    Hi everybody,
    When I create  a sales order in CRM,and the system will call IPC for pricing calculation,
    Object "pricingcondition" is one of the parameters,in which there is a field named "m_control",it's condition control.
    As far as I know,it has some potential values,such as "A","B",and "C".Is there anybody knows the meanning of them?
    Thanks.
    Edited by: Jerry cui on May 20, 2010 8:20 AM

    hi,
    This field Indicates whether the prices or values in a condition are fixed or whether they have been changed and, if so, in what way. For example the indicator shows, for example, if the prices generated by a condition have been changed manually during processing.
    A     Adjust for quantity variance
    B     Free
    C     Changed manually
    D     Fixed
    E     Condition value and basis fixed
    F     Condition value fixed (billed items)
    G     Condition basis fixed
    H     Condition value fixed (cost price)
    This field is same as the R/3 field KONV-KSTEU.
    Thanks and Regards
    shanto aloor

  • Does anybody know the exact date when iOS 6 will be released?

    Does anybody know the exact date when iOS 6 will be released? I know it will be coming out in the Fall, but I was wondering if anybody knew the exact date.

    no one but apple knows for sure, and I'm willing to bet at this point in time all they have is a target date (if the software package was done it'd be released)
    Bear in mind also, the first 48-72 hours after the software's release it's often quite challenging to get the update or it takes a lot of time because you're one of millions that are trying to get on the servers. So release date and available/accessible date can be separated by a bit.

  • Is there anybody knows the designed logic in report RHAUTUPD_NEW?

    Hi, expertes,we met a problem has somthing with SAP standard report RHAUTUPD_NEW,
    is there anybody knows the designed auhtorization profile delete/add logic?
    Thanks in advance.
    Jerry.

    I don't understand the problem. Please post the complete screenshot. And possibly the outline view.

  • My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

    My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

    I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project.  Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels.  I resampled the stills and everything was fine again.  Hope this might help.

  • I want to talk to an actual person anybody know the number?

    I want to talk to an actual person anybody know the number?

    Here is one for activation problems, etc.
    http://www.adobe.com/support/download-install/supportinfo/
    Can we help you here in the forum?

  • Anybody know the name of the little rubber plug designed to keep light leak from entering eyepiece

    anybody know the name of the little rubber plug designed to keep light leak from entering eyepiece. It is usually found attached to the strap supplied with EOS cameras. The larger eyepiece can be removed and the smaller rubber plug is inserted into the view hole. During long exposures, it prevents light from leaking in via the eyepiece area

    Uh, clever name. lol. I've attempted to order one various times fromB&H and always end up with the standard eyepiece. Talked with customer service but they didn't seem to know what I was talking about. I wish canon would make an eyepiece with an open closed switch. I would buy that. Thanks for your help Scotty

  • Does anybody know the app cleaner

    does anybody know the app cleaner???
    is it good?? my macbook is getting very slow

    I doubt that AppCleaner is going to speed up your Mac - unless you're short on hard drive space. Some companies have uninstall instructions or even apps on their websites for uninstalling their software. Use these instructions/apps if at all possible.
    I've used AppCleaner a couple of times just to get rid of as much auxiliary junk as I can... but my use of it is limited only to those apps which I know haven't made any system modifications.
    Be warned - without instructions/apps for uninstalling is the best method of uninstalling applications. Use AppCleaner only as a last resort.
    See thomas_r's -> How to uninstall software.
    Good luck,
    Clinton

  • Hi! Anybody knows the meaning of the "ornament" feature in Logic software?

    Hi! Anybody knows the meaning of the "ornament" feature in Logic software?

    They're a bit odd....
    An ornament is just a visual frame in the Environment, that does nothing except, well...be there.
    I've seen some people use them in complex Environment setups to act as a border for a group of buttons for example, so it acts like one of those little plastic boxes that you puts knobs and switches onto, to make them look better.
    That's about it.

  • Anybody know the estimate downtime for upgrade 10TB data 9i DB  to 10gr2

    Anybody know the estimate downtime for upgrade 10TB data 9i DB to 10gr2

    Depend of the choosing method.
    Depend if you move database, or if you stay on same server box.
    Depend of processor you have.
    In fact, the size of database is not directly implied during upgrade, that would be more regarding number of objects.
    If I said you one hour, that won't be a big help. Manual upgrade may be very quick, but estimate time is not an easy task. Test on your test server and estimate for your production.
    Nicolas.

  • Question: Anybody know the relationship between raw temp & rgb temp?

    I am trying to normalize relative  temperature adjustments for proper application to both raw files and rgb  (e.g. tiff/jpeg).
    Presently I divide the raw temperature offset by 100 to keep from over correcting tiff/jpegs. This  works sub-optimally. - Anybody know a better formula?
    for example, at present I have: delta raw temp / 100 = delta jpeg temp. Thus if I would apply 500 degrees warmth to a raw, it would translate to 5 units of warmth to a jpeg, which is usually a little light handed, but not always - depending on starting point. Any of you geniuses know an actual formular or equation to translate incremental raw temp to incremental rgb temp?
    It doesn't have to be exact - any improvement over the simple (starting-point independent) proportionality (ratio) would help.
    Thanks in  advance,
    Rob

    Jeff Schewe wrote:
    ...you don't understand...
    You caught me way out on a limb here .
    Jeff Schewe wrote:
     That's why there's a ZERO at the middle on a non-raw file because the white balance is already set by whatever color space it's in. The white balance of such an image WOULD NOT be a true Kelvin adjustment but a warming and cooling adjustment.
    Admittedly my understanding is limited. Does this mean its impossible to express a warming/cooling adjustment amount in Kelvin (for one of these non-raw files I mean)?
    Thanks Jeff,
    Rob

Maybe you are looking for

  • Get First day of a week

    Hi all, I have a question about using a presentation variable in a sql filter.Actually i have a presentation variable which return number of week per year ,the issue is that i want to have the firste day of the week selected in way to use it in the s

  • GENERIC_CODELET_GENERAL getting in jcaps 6 while building oracle otd

    getting the following error while oralce otd building. in jcaps 6..any inputs please... com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)      at com.stc.oracle.codegen.

  • Iphone 4S cannot power on and always be in recover mode when connecting itunes

    Hi, My iphone 4S recently doesn't work. It always shows apple logs and cannot power on. Even though I hard reset it, it still cannot power on. It is strange that when I connect it with iTunes, iTunes always says iPhone is in restore mode.then iPhone

  • Graduated method in financial statement version

    Hi, Can anyone explain me what is graduated total method in financial statement version creation in simple words. Thanks Mona

  • Calling crystal reports through JSP

    Hello everyone, Could any one forward me the url where I can find information and sample examples regarding calling of crystal reports XI through jsp? Waiting for reply.