Anybody tried Geil DDR3 and X48C

ntel duo core 8400@3Ghz (9x333)
2gb DDR3 1333 Patriot at 1.63v 9-9-9-24 PDC32G1333ELK
X48C Platinum bios version 7.2
PC Power&Cooling 750 Silencer PSU
MSI 8800GT nx88000gt 512mb 660/950
Samsun F1 750gb HD SATAII
Sound Blaster XFI Gamer sound
Viewsonic VG2230 22" LCD monitor
WinXP SP2 32bit
I was looking at getting some Geil ddr3 modules and had two questions. The modules I'm looking at are the PC3 12800 1600MHz 8-8-8 http://www.geil.com.tw/products/showSpec/id/138
1) Has anybody tried Geil ddr3 with this mobo and if so, did you have any problems with the combination of these products.
2) Do the timings need to be altered for getting a 4gb (2x2gb) set?

Quote from: rlb9682
I Just bought some Patriot DDR3 1333 memory 1.5v 9-9-9-24 Model# PDC32G133ELK
That looks like a real DDR3-1333
( http://www.patriotmemory.org/products/detailp.jsp?prodline=5&catid=13&prodgroupid=71&id=697&type=1 )
However, most of the Patriot DDR3-1333 are overvoltaged DDR3-1066.
Try to test their stability at 7-7-7-21 and 1.7V
good luck

Similar Messages

I am trying to reinstall Itune and it wont install because my computer says it has a virus. Anybody had this happen and what did you do?

I am trying to reinstall itunes and it won't install because my computer says it has a virus. Anybody had this problem and what did you do?

See the further information area of Troubleshooting issues with iTunes for Windows updates for direct download links. Try again.
tt2

Some of the apps previously downloaded have now become blank - white box instead of picture. Name of app still appears. Have tried hard reboot and sync to make sure everything is up to date. Anybody ever had this? How can I fix?

Some of the apps previously downloaded have now become blank - white box instead of picture. Name of app still appears. Have tried hard reboot and sync to make sure everything is up to date. Anybody ever had this? How can I fix?

One more thing to try. Double click on the home button. Scroll in that bottom line of icons (swipe finger to left) to the app that are all white. Hold your finger on the app until the - sign appears. Tap it to close the app. Hopefully it will then show up correctly. (As they say about chicken soup curing a cold, "can't hurt")

Has anybody tried creating and validating a XML doc with XML Schema?

Hi,
Has anybody tried creating and validating a XML doc with XML Schema?

With XMLBeans, an XML document may be created from and validated with an XML schema.

I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem

I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem?

Did you go through all the options?
Also this:
Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again.

I am unable to update my apps on my iPad and iPod and it says my Apple ID has been disabled,I've tried signing out and signing back in but it still comes up with it can anybody help?

Someone help me my iPad and iPod are saying my Apple ID has been disabled and I've tried signing out and signing back in but it won't work..anyone help?

Apple ID: "This Apple ID has been disabled for security reasons" alert appears
http://support.apple.com/kb/ts2446
Contact Apple Support
https://expresslane.apple.com/GetproductgroupList.action
 Cheers, Tom

Mini DVI to DVI + DVI to video out - anybody tried this on Macbook white?

Hi there,
reading the posts in the forum it seems quite clear that the mini DVI to video adapter is not compatible with the new Macbook white (early 09).
Has anybody tried to use a mini DVI to DVI and a DVI to video adapter together? In theory this combination should work but it is possible that Apple has done something to make this combination not working.
If that is not possibl, has anybody got any other ideas on how to connect a Macbook to a standard tv with the 3 RCA pins (yellow for video and red and white for audio)?
Thanks a lot
Mike

No, Mini DVI to DVI and then DVI to Video won't work either. But this will work used in conjunction with a Mini DVI to VGA Adapter:
http://tinyurl.com/5qxjqm

I am trying to update and restore a backup of an iPad. I ended up in an infinite loop of restoring and re-setting up the iPad. Help???? Suggestions?

This iPad had iOS 4.3.3 and I wanted to update it to the most recent software, 7.1. The first thing I did was I backed it up to my computer so I would be able to restore all of the photos and data after I had updated. At first, I tryed just clicking Update. It kept failing with error 9006. Then, I tryed the Restore and Update. This timed out even though it seemed to be moving alone just fine. The last thing I tried was to wipe the iPad and then update it. This worked. When it came up on my computer, it asked if I wanted to restore from a backup. I said yes and selected the backup that I made. It said Restoring. Afterwards, it took me through the normal process that you would go through to set up a new iPad. at the end of the setup, it asked if I would like to set it up as a new iPad, or restore from a backup. ???????? I tried to restore from backup and it started and endless loop of restoring and setting up, and restoring again. I eventually selected to set up as a new iPad. I cannot firgure out how to get the pictures back onto the iPad from the backup if the restore won't work. I was wondering if it is possible to find the picture files on my computer??? Does anybody have any suggestions or ran into the same problem???
FYI: I was a bit disapointed to learn that the online support chat now costs $20

Restore from iTune Backup
1. Settings>General>Reset>Erase all content and settings
2. You will be asked twice if you want to erase iPad
3. Slide to set up
4. Select Language
5. Select Country
6. (a) Use Location Service (b) Don't use Location Service
7. Choose Wi-Fi Network
8. Enter Wi-Fi password
9. (a) Setup as new (b) Restore from iCloud Backup (c) Restore from iTune Backup
10. Select "Restore from iTune Backup"
11. You will be instructed to connect to iTune (computer)
On computer
12. Two options offered
13. (a) Set up as new iPad (b) Restore from backup (a list of backup will be shown)
14. Select Restore from backup and select the backup
15. Continue
16. Restoring iPad from backup
17. The settings for iPad restored

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

Has anybody tried the Day-Timer iPhone App - Syncs. Calendar + Todo list?

I have had my iPhone 3Gs calender sync. break several times,
and honestly none of them seem to be my "fault". I stumbled across this app. and for $6 I'd take the cowards way out rather than try to fix my current broken sync. problem with iTunes. Has anybody tried this?
http://www.daytimer.com/iphoneapps/
Frankly the demo. seems pretty clever:
http://www.youtube.com/watch?v=s7FDiy5PsfU
I have not connection with Day-Timer company... other than being a potential customer

Vlingo doesn't consume all the app memory space itself... it can be used by a number of factors, including the browser cache.
Your unintall of Vlingo also caused a reboot of the device in which all the free memory space was cleared, from routine use of the BB device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Trying to load and install gnome

I have tried to load and install gnome for thge past three(3) days with no success. If this is what Arch linux is all about then its lost on me. Anybody want to change my mind?

this is an example of how not to ask a question.. first. if you want to leave go ahead, no one is holding you back.. second obviously, trying to "load and install gnome for the past three(3) days with no success" is not what archlinux is about.. having said that..
you need to install xorg
http://wiki.archlinux.org/index.php/Xorg
and the you need to install gnome
http://wiki.archlinux.org/index.php/Gnome
next you add a login screen or configure your .xinitrc
i can only tell you this as you provide no useful information or say _specifically_ what your problem is

Has anybody tried to install RAC on Zones as nodes ?

Hi guys,
Could anyone share his experiences about installing Oracle RAC
on Solaris zones located on single physical machine ?
I created 2 sparse root zones , presented the same raw devices for ocr and votedisk to them and try to install clusterware,
but during clusterware initialization there is an error
OCROSD[1]utsz:3: ioctl DKIOCGAPART failed. errno 48
Does anybody tried similar configuration ?

I have not tried this since it is explicitly unsupported by oracle.
Bjoern

Anybody tried weblogic server 9.0 or 9.1 ?

anybody tried weblogic server 9.0 or 9.1 ?
whats are the differences you have seen in them ...i know the link that gives the whats new in ? for each version that bea comes up with, please do not refer me to that link ...can anyone tell me your expereinces with the newer version ?
I thank in advance to anyone coming with +VE replies for this post.
Sarvotham

Hello,
Admin/boot credentials are specified when you are creating a new domain, not while installation. Create a new domain, it prompt for user credential, remember them. Then start the server and try to log on to admin console using that credentials.
http://e-docs.bea.com/platform/docs90/confgwiz/intro.html#1065242
Regards,
Kuldeep Singh.

Cannot start my mac, tried resetting pram and smu, I cannot even boot up from SL disc anymore. any other suggestions

Firstly apologies for any spelling or typos but I'm typing from my iPod touch!
My initial problem was that my mac kept crashing soon after start up on 10.6.7. After installing the is back to 10.6 it seemed to be work ok but not great. After updating to 10.6.7 the problem came back so once again I reverted back to 10.6. Then 10.6.8 was released not long ago so I gave it a try... Same issue.
Now I want to revert back to 10.6 but it's not letting get past the grey screen with the apple logo with the spinning thing underneath. I have tried resettin smu and pram but I get nowhere. Booting from my snow leopard disk to revert no longer works. So where do I go from here???
Please help somebody.
Thanks,
Carl

So as it stands my iMac has the Snow Leopard disc inside as the startup disc. As a result it is now not allowing me to boot up in safe mode and perform smu or pram resets. It goes straight to the grey screen with the Apple logo with the spinning thing underneath.
It just keeps spinning and spinning i thought i'd persevere and leave it and see what happens. TWICE i've left it hanging for 2 hours (while i popped out) and came back with the same grey screen.
This is now worrying me because as a worse case scenario i cannot even remove all my data before trashing it (or throwing it out of the window which seems like the more attractive option right now).
If anybody out there has any more suggestions please please put a post on here.
Many thanks in advance,
Carl.
PS. Why wouldn't it even attempt to start for the snow leopard disc? I can understand that it can't boot from the system but surely booting up from the DVD should always work???

TS3694 trying to restore and update my iphone 3g but it keeps saying the iphone cannot be restored error code 1015 can anyone help?

i am trying to restore and update my iphone 3g which i have just brought but it keeps saying iphone cannot be restored error code 1015 can anybody help please?

This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Anybody tried Geil DDR3 and X48C

Similar Messages

Maybe you are looking for