Anybody using a Citrix or VMware solution for all Oracle 11i clients/users?

Hi,
We are seeing a fair amount of browser issues in 11i so we are thinking of purchasing Citrix or Vmware and just have all users of Oracle go through this system instead of the browsers on their PC's. Does anybody do this now, and what are the advantages and disadvantages?
The real chance we will do this is only about 50% - We recently eliminated Jinitiator and went to JRE, which is somewhat better, but at the same time the JRE is being updated fast and furious (e.g 1.6.0_22 came out yesterday, 21 did not have a long shelf life).

Pl post details of EBS version.
>
We are seeing a fair amount of browser issues in 11i ...
>
Pl detail what these issues are. How would using Citrix eliminate or reduce these issues ?
Oracle recommends that automatic JRE updates be disabled.
Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite 11i (Doc ID 290807.1)
http://blogs.oracle.com/stevenChan/2010/07/warning_e-business_suite_issues_with_sun_jre_160_21.html
http://blogs.oracle.com/stevenChan/2010/08/jre_6u21-b08_for_ebs.html
HTH
Srini

Similar Messages

I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new. If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.

Found a solution for all issues!

Hi all, I just wanted to post my solution for all my problems with my nokia e63 (maling issues, crash issues, browsing issues, etc), yes, there is a simple way to solve them all and I took it, I just got a Blackberry and now everything runs smooth!! YES!, there is light at the end of the tunel, jajajajajaja I'm so happy to finally get over this nightmare, hope you all find your way out of Nokia's blackhole! Good luck

I was able to locate an example that somewhat applies to your application:
https://decibel.ni.com/content/docs/DOC-11632
I simply modified the code to allow for CI and CO tasks, similar to your VI, and it worked fine. I've attatched the modified code below. However, I was unable to run your code without receiving the error you were seeing. Even after I made the VIs identical (leading up to the Start Task VI), I saw different bahavior. The VI that you are working on may have been corrupt. This modified example should be a good starting point.
Applications Engineer
National Instruments
Attachments:
9401NibbleConfig.vi ‏29 KB

Is there a way to create a "common desktop" for all RD/TS 2012 users? (Office 2010 icons on the dekstop, for example.)

Hello! Just like the title, is there a way to create a "common desktop" for all RD/TS 2012 users?
I know how to do this using regular W7 workstations and 2008 Servers, but the "Default" folder under the USERS directory is gone and I'm not sure how to get the icons there in Windows 8, let alone Server 2012 Remote Desktop.
I've installed Office 2010 on the 2012 server, but every end user that logs in has to manually type in "Word," "Excel." "PowerPoint." etc from the metro interface, then right-click each icon to add the shortcut to the desktop.
Given the... uh.. unfamiliarity of our endusers around the computer, this really isn't the best option. What I'd like is them to log on and have all the Office icons ready and availible for them.
Any ideas?
Matthew J. Fazio

Hi,
You can edit the local GPP and create a desktop shortcut for all users.
Reference:
Customize the default local user profile in windows Server 2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/3f178a0e-128e-4f4f-870a-90c8bbf1afeb/customize-the-default-local-user-profile-in-windows-server-2012?forum=winserver8gen
Also, you can use CopyProfile to customize the Default User Profile.
Customize the Default User Profile by Using CopyProfile
http://technet.microsoft.com/en-us/library/hh825135.aspx
Best Regards.
Jeremy Wu
TechNet Community Support

I have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

i have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

Hi Tyler199869,
If you are having issues making or receiving calls after updating your iPhone, you may find the following article helpful:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Regards,
- Brenden

Ecc6, after i've changed all the passwords for all oracle users, then how

ECC6, after i've changed all the passwords for all oracle users, now sap can't connect to oracle , then, How can i config the sap to make sure it can boot normal?
If our database is sqlserver, i've changed the database password for all database users, then, How can i config the sap?
Thanks!

My db is oracle , the oracle host name is dbserver.
The sap ap server only install the SAP. SAP host name is apserver.
Just now i've altered all the password of the oracle database db user account, Include the account "sys".
(I must alter the password.)
Now the SAP service in the host "apserver" can't boot.
Could you teach me how can i config the "apserver" to make the SAP normal boot ?
Thanks!
Best regards!

Best coverflow and missing feature alternative solutions for all platforms.

Personally for me coverflow was a important feature. Not JUST a feature but what really defined iTunes as BEING iTunes.
I would have actually loved if apple instead of removing it expanded on it and made it faster,better,stronger. With things like back label support so on and so forth.
I'd like the communities thoughts on some of the best alternatives for the missing coverflow & other features currently left out of iTunes 11 on both Mac and Windows.
Also, If there is a way to link(link up) any of those to iTunes 11 for track and volume control. Ideally for not just sending but also receiving track and volume input.
And whats the absolute BEST solution for each platform. I understand running iTunes 10.7 or 11 sandboxed or on another machine may also be an option.
So.. lets look at things like resource usage Vs usability...
For me CAD (CD Art Display) has always been helpful especially combined with raindrop even tho it doesn't have flow options for the most part on 99% of themes. It still makes my library pop.
Looks like there are 3 options for Mac
Steel Sky (SteelSkies)
Everplay
CoverStream
Its worth noting Everplay has Last.FM support. Not sure if that can be integrated into iTunes 11 somehow.
For windows the only thing i could find remotely like coverflow is a widget called XDeskCover
To mods:
Please stop deleting my posts. If you want to take the time to completely remove a feature from a program atleast let us explore some alternatives so we can continue actually using apple products.

another method suggested in these forums in the post "session manager stopped working with firefox 3" by Charles Anderson works for me and allows me to use my little X.
go to options -> General tab
under startup/when firefox starts -> change to something other than "show my windows and tabs from last time".
I've had this on show my homepage previous and it got changed somewhere and I think it was from an update or addon which is why a few others are having the same issue.

HT5621 I have several apple devices, three are mine and the other ones belong to my little children. I use the same ID and password for all the devices. Is this a good idea? Do I need to change the apples ID?

I use the same apple ID for all my devices, 2 iphones, 2 itouch, 1 macbook pro, 2 ipads. Becuse I have small children, can I change that and still, have control, and don´t need to buy the same things serveral times.

It is something I would avoid if possible. I would want to educate my children to think possessively and therefore of security. Yes, I know you are all family but at the end of the day you wouldn't want your children to be blaming each other for any problems that arise. Well, that's how I see it, for what it is worth.

Powershell 4.0 How to use Add-Printer to add printer for all users (machine)

Is there a way I can use Powershell 4.0 Add-Printer cmdlet to add a printer for all users (machine)? I tried from an admin account but it only adds a printer for the currently logged on user.
thanks.

Adding a printer for all users requires having access to their profiles (and registry hive for user) to save the mapped printer information. Your best bet is to either use Group Policy Preferences or write a user logon script that ones when they log in and
maps the printer if not already mapped.
Group Policy Preferences Example
I wrote an article a while back that shows how to use a GPO logon script to map a printer. It doesn't use V4, but the process would be the same as far as a GPO goes.
http://learn-powershell.net/2012/11/15/use-powershell-logon-script-to-update-printer-mappings/
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

Upload using eCATT to change fax number for all existing Vendors

Dear All,
Using eCATT upload, i need to change the Fax number format for all existing vendors. How to do this?
I havent used eCATT before, please guide me in this regard
Thanks
RS
Edited by: Ramapuram Saravanan on Feb 8, 2009 6:13 AM

Hi Luis,
Use tcode XK99 for vendor mass change, select the Fax no field. You have to take note that this changes will be only 1 fax number for all vendors.
Else you have to use BAPI for mass change.
regards,
maia

Possible solution for all you that have skipping songs, & scratchy sound

Hi All,
After upgrading to 7.02, I was extremely annoyed with the performance. But here's what I found and did. In a nutshell, you uninstall the new version and install a 6.05 version or earlier. I'll include some links to what I found and hopefully it'll help. Here's the first link and it describes what you need to do. Scroll down to the post by marlowe5 posted 10-08-2006, 8:06 A.M. and I also included the exact wording from the post below the link.
http://www.oldapps.com/forum/archive/index.php/t-228.html
This is the exact wording:
Thanks for the advise in this post... after installing iTunes 7, and then 7.01, my computer was running really slow, iTunes was skiping and garbling and acting terribly... so I really needed to go back to 6.05.
For all of you that need to do the same it's pretty easy:
I downloaded the 6.05 install file from from oldapps, uninstalled 7.01 and then re-installed 6.05. When I ran iTunes it did give me the error message that the library file was created in a new version and couldn't open, but I then deleted the 'itunes library.itl' file (in My Music > iTunes folder) and then replaced it with the backup that was automatically created when I installed 7.01 (in My Music > iTunes > Previous iTunes Libraries). iTunes then started up fine with all my music and playlists. And all the skipping and CPU bogging is better now.
Library file note:
With the library file, when you update iTunes it also updates the library file, which won't work with older versions. So you need to replace this file or create a new one. I would recommend copying/backing up the new library file to a different location to be safe instead of just deleting it. You'll see above where to find the new library file and prior ones. When I made these changes I did two things to be safe, 1) I moved the new "iTunes library.itl" to a backup location instead of deleting it 2) I moved my most recent old library file from(My Music > iTunes > Previous iTunes Libraries) to (My Music > iTunes folder)and renamed it to "iTunes library.itl". It was previously "iTunes library 2006-1-18.itl." Before renaming it, iTunes didn't find the library so renaming it worked. Your file name will most likely have a different date so don't look for the exact file I mentioned. Plus it's probably a good idea to make a copy or back up this library file too.
If you don't have any previous library files, you may need to create a new one. I don't have the info but I believe the link to the post should have that info.
After reading through the post and other info, the only thing that it appears might be lost are playlists that have been created since the upgrade. I don't believe any music should be lost but that's why it's safer to backup the new library just in case. I did not lose any music.
Also, here's a link to where I found old versions of iTunes:
http://www.filehippo.com/download_itunes/?1249
Hopefully this helps and good luck. I'm back to normal now.
Dell Dimension 4550 Windows XP
Dell Dimension 4550 Windows XP
Dell Dimension 4550 Windows XP

Soccerteen,
Make sure you try all the other remedies mentioned in other posts. If this didn't work for you then try below. I consider it a last ditch effort since it's going back to a previous version, which unfortunately works much better than 7.0x for me.
Remove & backup your current library file to a different file/location to be safe. Once you do that, uninstall 7.02, and then install 6.05 or any 6 version. Once 6.0x is installed and you've opened it, you'll need to create a new library file. If you've removed the library file from (My Music > iTunes folder)it should load up with a blank slate. What you to do from this point is create a new library file. Read the oldapps link, the post from "Admin" dated 9-30-2006 5:30 PM should help. Most likely all of your music will be under one main file but you might have to add individual folders one at a time depending on how much music you have. Since I didn't have to go this route, I'm not sure if it's the best route but after reading multiple post, this was the most common suggestion. Worst case scenario, you can always reload 7.02 an reinsert the backup library file, which will put you back where you started.
Hope that works for you and good luck!

Solution for installing oracle 9i successfully on win XP

I have found this method to be reliable in installing oracle 9i on win XP without giving any problems.Try it out and let me know if it helped you all too.
1. De-install Oracle 9i and any other Oracle products.
2. Clean out your registry, removing all references to any Oracle product.
3. Delete all Oracle folders, including the inventory folder in C:\Program Files.
4. If installing from a CD, wait until the splash screen appears then cancel the installation. Find AUTORUN.EXE on the AUTORUN folder of the installation CD. Right click on it, select PROPERTIES, then click the COMPATIBILITY tab. Check "Run this program in compatibility mode for:", then select "Windows NT 4.0 (Service Pack 5)" from the drop down list. Click OK. Do the same for SETUP.EXE.
5. Double click AUTORUN

Hi
I download Oracle
Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition
for Windows XP 2003/Windows Server 2003 (64-bit)
And try to install it on XP.
I installed it according to your explanation.
I installed from a CD and wait until the splash screen appears then cancel the installation. Find AUTORUN.EXE on the AUTORUN folder of the installation CD. Right click on it, select PROPERTIES, then click the COMPATIBILITY tab. Check "Run this program in compatibility mode for:", then select "Windows NT 4.0 (Service Pack 5)" from the drop down list. Click OK. Do the same for SETUP.EXE.
I Double click AUTORUN, click “install/deinstall products”, A message came out “ unable to start oracle installer: Please verify path for the file D:\install\win64\setup.exe”. I went to the directory D:\install\win64, Double click setup. A message came out “D:\install\win64\setup.exe is not a valid Win32 application”.
Can you help me ?

Getting DDL for all oracle objects

I am working to get the DDL for all the oracle objects within my schema.
Some how I got the DDL but I can't got the comments associated with the oracle tables.
Shall I know what I am missing in using dbms_package I am currently using ..?
Below is the sql I am using to get DDL
SELECT dbms_metadata.get_ddl(replace(OBJECT_TYPE, ' ', '_'), OBJECT_NAME,OWNER)
FROM DBA_OBJECTS
WHERE OBJECT_TYPE in ('SEQUENCE',
'PROCEDURE',
--'DATABASE LINK',
'PACKAGE',
'PACKAGE BODY',
'MATERIALIZED VIEW',
'TABLE',
'INDEX',
'VIEW',
'FUNCTION')
AND
OWNER = 'Schema_1';
Can I know what needs to be changed to above sql to get comments on oracle tables along with their DDL.
Any advise is highly appreciated.
Thanks
JP

>
I am still MISSING ';' after every sql and comments.
>
You only get what you ask for. If you want modifications you have to set the proper transform parameters.
See DBMS_METADATA in the PL/SQL Packages and Types doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_metada.htm
See SET_TRANSFORM_PARAM and SET_REMAP_PARAM Procedures and table 74-22 that list the parameters you can use
Here are some examples from Java code that I use depending on flags that have been set
-- set the transforms back to the defaults
        String defaultTransform   = "BEGIN DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'DEFAULT'); END;";
-- do not include referential constraints
        String ref_constraints    = "BEGIN DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'REF_CONSTRAINTS', false); END;";
-- do not include constraints
        String constraints        = "BEGIN DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'CONSTRAINTS', false); END;";
-- do not include the schema prefix
        String noschema           = "BEGIN DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'EMIT_SCHEMA', false); END;";
-- make it look pretty
        String pretty             = "BEGIN DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'PRETTY', true); END;";
-- don't include the physical properties
        String physicalProperties = "BEGIN DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'PHYSICAL_PROPERTIES', false); END;";
-- don't include the segment attributes
        String segmentAttributes = "BEGIN DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SEGMENT_ATTRIBUTES', false); END;";
-- include a sql terminator for each statement
        String sqlterminator      = "BEGIN DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SQLTERMINATOR', true); END;";The last one is what you are looking for.

Setting the Default Homepage for all current and new users but leave it user modifiable.

I am in the process of creating our new Windows Deployment Image based on Windows 7. Previously I was able to use the browserconfig.properties file in the Firefox main program files directory to change the default homepage for all new profiles while still allowing the user of any given profile to change their homepage. I have not yet found any equivilent in FireFox 4. Any help would be appreciated. Thanks.

> The locations of the files are different and none of them show up under
> the new user, but do show up for existing users.
Enable logging for GPP files to see what's happening:
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Is anybody use LR with Photoshop Elements 6 for Mac ?

I've just bought Photoshop Elements 6 for Mac on a PM G5 (OS 10.5.2). PSE works but LR don't find it as external editor. I have done what is the Knowledge Base, I've deleted all adobe products (and all related files in /Library an home/Library) and reinstall only PSE 6 and LR 1.3.1 .
In KB, they tell that LR uses a com.adobe.Photoshop.Elements.plist but PSE 6 creates a com.adobe.PhotoshopElements.plist (without a dot between Photoshop and Elements). I've tried to duplicates this file but that does not work.
I don't understand why LR does not provide a way to specify where Photoshop (or Elements) is. I don't know what to do now.

For some reason Adobe decided to change the bundle name for the PSE6 application from com.adobe.photoshop.elements to com.adobe.PhotoshopElements. This change is also reflected in the Preferences file names.
Lightroom (1.3.1 and 1.4) seem to use the MacOS core services to find PSE - but use the com.adobe.photoshop.elements (and com.adobe.photoshop for full PS) bundle names.
The immediate fix, if you're handy with a hex editor, is to go into the Lightroom application bundle, find the file AgEditExternally.lua and patch the string "com.adobe.photoshop.elements" in the file so it becomes "com.adobe.PhotoshopElements" (remember a null terminator and make a copy of the file first!).
If that's Greek to you then either live with it and wait for an official fix or set up Elements 6 as the 'Additional External Editor'.

Anybody using a Citrix or VMware solution for all Oracle 11i clients/users?

Similar Messages

Maybe you are looking for