Anybody using an iMac? Noise?

Is anybody using the 27" new iMac? What's your experience with noise? Can it be used in a recording environment??
g.

Yeah, why can't you? You should be able to as long as the flashdrive has Plug-n-Play (which all flashdrives should have) and it supports Mac.

Similar Messages

My internal drive is NOT showing up in the event library in Final Cut X. I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8

My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
I am also getting error message "The operation couldn’t be completed. Cannot allocate memory" when attempting to create a new "event". Any ideas?
If I had a application disk, I would unistall and reinstall FCPX. I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
Thanks

Well it did NOT work. Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
ANY ideas . . . . Anybody . . . . APPLE?

Can I use my iMac as a Gamecube or PS2 monitor?

Total newbie here, and I am loving my new iMac!
I wonder if there's any way (with a special cable or adapter) to connect a video game console to my iMac monitor? My GameCube connects to my regular TV with regular RCA cables (yellow, red, white for audio/video). It would be really nice to somehow use the iMac as a monitor for this.
Any ideas or insight are much appreciated!

Hi, have you tried this? I looked at the FAQ in elgato and it says:
"The analog inputs of EyeTV Hybrid have a delay of only few milliseconds, allowing for excellent live gameplay."
So I think there's still a problem of latency...and it also says that:
"An inexhaustive list of supported consoles would be:
Dreamcast
Gamecube
N64
PlayStation
PlayStation 2
PlayStation 3 (not all games)
Saturn
Wii (not all games - Virtual Console might be an issue)
Xbox
Xbox 360 (not all games)
All of the above have composite and S-Video output. Component, HDMI, DVI, VGA and other outputs cannot be used with EyeTV Hybrid.
The digital ATSC or DVB-T inputs cannot be used to play video games. Use the analog inputs (composite, S-Video, analog RF) instead."
http://faq.elgato.com/index.php/faq/more/443/
I'm also trying to look for a way to plug my bro's Wii and PS2 to my iMac...so if anybody who tried one that's really great, I'd be really really appreciate it..:)
iMac G5 Mac OS X (10.4.9)
iMac G5 Mac OS X (10.4.9)

Digigami MegaPEG.X Pro, anybody used it?

I'm interested in a very good MPEG 2 conversion, anybody used Digigami MegaPEG.X Pro? I know its compatible with FCP, but no more...
Thanks

I think I will go for BITVICE or look for a facility with dedicated hardware
(if price is affordable), compressor is ok, but spending so much time editing
and color correcting etc (even if its plain DV and for hobby) I want a better result in terms of quality
Thanks again
iMac g5 1,8 Mac OS X (10.3.7)

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

HT204053 I use my iMac to help a friend with an IPAD and a different Apple ID to transfer their existing cps to iTunes on their iPad. How can I do this without the content being merged into my own Apple ID Account

I have an IMac which is my main computer and two IPads and an Ipod Nano.
Obviously we use these in sync as an when required via Itunes.
I have recommended a friend to have an IPAD2 and she wishes to load some of her existing cds into her Itunes Account.
If I wish to do this with my own, it is simple as we simply use the Imac which transfers content into Itunes.
However, my friend does not have a separate computer so I wish to load her CD's into Itunes and then sync to her Ipad without interfering with my own library and using her Apple ID.
How can I achieve this?

" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

My wife and I share the same iTunes account. How can I setup a separate account for her iPhone using my iMac?

My wife and I share the same iTunes account. How do I setup a separate account for her? Can I do it using my iMac?
Thanks

Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone

How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.

The following has instructions: OS X Mavericks: Share your Internet connection

How do I use my IMac as a second moniter for my Macbook Pro?

Okay, So I would like to use my IMac as a monitor for my mbp. The IMac is a 2010 model and the Macbook is 2012 (Not the retina).
I'm a music producer and I'm sick of having to switch devices so I just want to keep all my stuff on the macbook but the screens way too small.
What I want to do is use the mbp screen with the mixer section of logic as well as use the IMac as a second moniter with the arrange screen.
Is it possible to do this with an ethernet cable?
if so
How do I do it?
Oh and a question on the side, Is mavericks worth the download?
Thanks!!

You can use the iMac as an external display for your MacBook Pro, always that you have got a 27-inch iMac. See > http://support.apple.com/kb/PH11302
You have to purchase a Mini DisplayPort cable (Ethernet won't work, as this is not designed as a video cable to connect Macs), and then, press Command and F2 keys on the iMac.
If you have got a 21'5-inch iMac, you can use an application like ScreenRecycler, which uses your network to use the iMac as an external screen

How do I use my iMac(late 2009) as a monitor for my MBP(2012) or my MBP(late 2010) without software?

I currently have a late 2009 iMac, a 2012 MBP, a mid 2010 MBP and a MinDisplay Port (MDP) male to male cable. I am trying to either use the iMac a second monitor for one of the MBPs or mirror the display.
The iMac has a MDP port and is running OS X 10.7.5 (Lion)
The MBP 2010 has a MDP port and is running OS X 10.8.4 (Mountain Lion)
The MBP 2012 has a Thunderbolt port and is running OS X 10.9 (Maverics)
When I connect the 2010 MBP to the iMac with the MDP cable the screen of the iMac goes black and the MBP flashes blue. I have been looking for a solution and I have tried:
Rebooting them in the order of: connecting the cable, turing on the MBP, then turing on the iMac
Whilst they are on simply plugging the cable between the two
Connecting them with the cable while they are on, then pressing cmd-f1 on the MBP
Connecting them with the cable while they are on, then pressing cmd-f1 on the iMac
Pressing cmd-f2 on the iMac, whilst there are connected, only toggles a black screen on the iMac
Pressing cmd-f2 on the MBP doesn't do anything
Every time I connect the MBP 2012 to the iMac with the MDP cable, the MBP screen goes black and the computor screen becomes unresponsive but the screen stays on and I have to reboot the MBP.
I will really appreciate anyone who has any information on this topic.
Thanks

If the iMac is a 21-inch model, not without using a product such as ScreenRecycler over a network.
If the iMac is a 27-inch model, click here for information.
(127021)

How do I delete an associated device in iTunes) namely my iphone 6 (8.1) I am using an imac with Yosemeti

How do I delete an associated device in iTunes) namely my iphone 6 (8.1) I am using an imac with Yosemeti

Howdy nzh50,
It sounds like you have a device associated in iTunes with your Apple ID that you would like to remove from your account. This article should help you out there:
iTunes Store: Associating a device or computer to your Apple ID
Removing an associated device or computer from an Apple ID
To remove a device or computer from your Apple ID:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Click the Remove button next to the device name you would like to unassociate.
Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
Thank you for using Apple Support Communities.
Take care,
Sterling

Can i use a hdmi to mini display port cable to use my iMac as external monitor for a windows laptop?

Does anyone know if a hdmi to mini display port cable can be used to link a windows laptop with an 27 inch iMac to use the iMac as an external monitor. Or are there other options to connect my DELL latitude 6430?

Is the 3.5mm-to-optical cable any better than using a standard 3.5mm? I don't know too much about this stuff. My thought process was that if the source of the connection is a 3.5mm jack, does it make a difference using a cable that starts as a 3.5 and converts to optical?
Chances are excellent that if your receiver is less than 20 years old it has an optical input, this is a digital signal which will sound MUCH MUCH better than using an analog 3.5MM to 3.5MM connection. I recommend using the cable suggested or one with the same connections but of a different length if your needs warrant it.

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

HT3492 What do I need to do to use the iMac as a monitor from my HP laptop? I have my HP connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

What do I need to do to use the iMac as a monitor form my HP laptop? I have my laptop connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

vga may not be a compatible port
https://discussions.apple.com/thread/2246912?start=0&tstart=0
more hits
https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=use+imac+as+m onitor+for+pc&oq=use+imac+as+mon&gs_l=igoogle.3.0.0l10.2417776.2420497.0.2421354 .15.11.0.2.2.0.316.1723.0j4j3j1.8.0...0.0...1ac.-OkFwmTKBg0

Can I use my iMac as a 'display' for my MacBook Pro?

Hi all, I am really hoping someone can help me here.
I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
Any suggestions would be really appreciated.
Thanks!

The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
Cheers
Rod

Anybody using an iMac? Noise?

Similar Messages

Maybe you are looking for