AnyChart 6 (HTML Support) and APEX?

Hi,
I would like to know if there are any pans on Orace side to support AnyChart 6 (HTML5 support) in future version of APEX? Flash graphs are very nice, but they are Flash based and show pretty bad performance, even if in APEX 4.0 they perform much better than in earier versions.
Since Flash is on the way to dissapear, it woud be nice to know what is to be expected of the reporting support in APEX. TIA.
Tamas

Hi Patrick and Roel,
Thank you for the SoD.
I know that no dates are enclosed and it makes no sense to ask for one, but could you please tell, how will the release cycle of APEX is going to be? With APEX 3.x it was very infrequent, with APEX 4.x it seems to change but still very hard to calculate. On the other hand it would be good to know, wether we should start to use AnyChart 6 and later migrate to the new APEX version that is comming with HTML5 support or we should better wait, because it is comming soon (i.e. in 1-2 months)?
Regards,
Tamas

Similar Messages

Authentication support for Apex 4.1 and 3.2.1.00.1 on Active Direct 2008 R2

Hi,
We are about to upgrade our domain controllers to Windows Server 2008 R2 from Windows Server 2003.
We have 2 Apex production applications running on:
Apex 4.1 and Apex 3.2.1.00.11., both of which authenticate users against the domain. Can anyone confirm whether upgrading our Domain Controllers to WINDOWS SERVER 2008 R2 is supported or likely to require changes? Neither application points to a specific DC for authentication, they simply point to the domain top level.
Thanks,
Andy

That's a shared drive. And it must be allowed because our current production APEX applications have been linking (and still do) to files for several years now. Only my fresh install of APEX 4.1 doesn't link.

HTML 5 and CSS 3 Support In Dreamweaver CS5

I cannot find any information on this web site about whether and how Dreamweaver CS5 supports HTML 5 and CSS 3. There are lots of other fancy high-end whiz-bang technologies highlighted in CS5, but without support for HTML 5 and CSS 3, Adobe has left a great big hole in the middle of the new Dreamweaver. If I'm going to have to code these by hand, then there's little incentive for me to upgrade from CS4. Adobe may, by this oversight, intend to extend the useful life of Flash, but if this is so it's penny wise and pound foolish. There is much to like about Flash - and much to dislike about how it works on the user side. Leaving these problems unresolved hurts Flash, and leaving HTML 5 and CSS 3 support out of Dreamweaver hurts Dreamweaver. In other words, this is a lose-lose strategy.

Hi Scott
Sorry for the delay in replying, but I turn my internet connection off when working, otherwise I have found I tend to do more research than work.
Media-Queries:
I had viewed the video on the possible implementation of media-queries when it was first released, and in most respects the implementation is as I would expect, but it would be helpful if it was, (in a future development of the use) possible to show a list of 'common' smartphone/handheld devices, (makes/models) within the dreamweaver interface that would be usable with the screen size being used, (possibly as an import from the 'device central' device list as a drop-down list). My reason for asking for this feature is primarily as a time saving feature for the css layouts via media-queries as it would then show the targeted/usable devices in a list, and possibly alleviate the requirement of developing layouts that are not really required.
Video:
At the moment I am using the video feature as you have indicated where possible, and am doing so with the use of IECC's for IE as a fall-back for that browser. I have tried targeting versions if Firefox and Safari that support the video element by testing for it with JavaScript, but I have found this unreliable, possibly when the standard is finalized this may be the better method.
SVG:
I personally have decided to go with svg in preference to canvas. I have seen a few 'wow' factor demo's produced using canvas but as they use cross-compiled java to javascript code they are in reality showing nothing that has not been done before, (If we had 4Ghz processors with multi-core in 1999 similar trial graphics in vml would have worked just as good then, showing my age here!).
My current work-flow with svg is - Inkscape - Modify the code by hand/preview in a browser - copy/past the code into dreamweaver.
The current in-line implementation of svg's in the IE9 preview is where I see the main future of the svg implementations, as this makes using svg's for graphic elements and basic animations much more viable/easier for the average designer/developer, and lets not forget that as it is a vector it is ideal for resizeable background images in fluid/liquid layouts.
I should say here, that I will for the foreseeable future use flash/swf's for more complex animations, as these are still much better quality than anything that can be achieved with svg or canvas.
I would like to see the possibility of using Fireworks for the creation of svg's, and a work flow similar to that available between fireworks and dreamweaver at the moment.
Cache manifest and database:
As you have rightly grouped these two together, (and I cannot really envision a situation that they would not be used so) the situation with these is for me, (when trying to create the code for use) the necessity of 'remembering' what I must include in the cache and the transfer of the data for the database.
Both are probably better explained with a typical scenario -
A new research/development firm has developed the technology and parts to upgrade an autos internal combustion engine to an hydrogen powered engine. However the products list is specific to the motor manufacturers engine type, and to make matters worse the sales department also wishes an off-line version of the demos and parts list to be available to its sales team and customers, (o/k, maybe this is not a typical scenario, but it does demonstrate the usage).
When developing the 'custom' html 5' enabled page I would require the cache manifest to include all necessary javascript/images/videos that would be required for the particular auto manufacturer to be available off-line, and compiling the list must be done at present by hand making it subject to possible errors.
As for the database, (manufacturer specific) this must also be available off-line and updateable by the sales person and customer, as they are not always on-line and no hard-copys of material will be produced, (except when printed by the mechanic).
My solution for me regarding the cache manifest would possibly be a dialogue in dreamweaver that would show all resources associated with the auto manufacturers model type used in the html site. I have used namespaces, (or some form of identifier) for general and model specific javascript, and a model identifying code for images and videos. The dialogue would then allow me to filter the resources required using the namespaces and identifier and include them in the list as required, possibly in much the same way that items are moved from a general list to a more specific list when creating the 'favourites' toolbar in dreamweaver.
The database is on first appearance much simpler, as I would simply download the database using the motor_id as a filter, (yes Scott, you can see where I am going with this ) for those who cannot this would be wrong. You have correctly seen the problem with doing this, but I will explain for those who have not. The sales person and the customer would not see any of the images or videos that have references stored in the database, as these are just references and not the actual images/videos, yes one could use 'BLOB' for storing the items but this is not in my experience a reliable method. What is required is some form of method that would also download these items and place them into the required file position for off-line viewing, (which is what the cache manifest would do).
So I would also require the possibility to add dynamically to the cache manifest from an sql database at the same time as the 'save for off-line' option is generated, (I have experimented with doing this in a similar manner that xml is created from an sql database).
That's it for the html 5.
Accessibility:
For checking I use the firefox accessibility extension and total validator extension first, then the WAVE evaluation tool.
But for Dreamweaver I would like to see the inclusion of the ARIA options as standard, especially when developing 'rich-internet-applications' particularly the aria-live and role options. I often find it interesting in discussions about html 5 where it is seen by many as a 'new' mark-up' language for the web, but rarely seen in the context of helping in accessibility when used correctly. Even the html 5 spec contains a section on using the new mark-up as part of accessibility and how the ARIA roles should be applied, (see - http://www.whatwg.org/specs/web-apps/current-work/multipage/content-models.html#annotation s-for-assistive-technology-products-%28aria%29).
The inclusion of an extra live-view option in dreamweaver that render the page in 'screen reader' mode would also be a possible accessibility checking help. This could be done by simply turning off the background-images 'on-mass' and rendering any items as they would be seen by a screen reader. As most screen readers do now parse JavaScript and css, it would illustrate the problems of using such techniques as light-boxes without using the aria-live role to tell users that the light-box in now the focus of the page.
For anyone who has stayed with this post, my sincere thanks, and any comments on the content would be welcome.
Paula Z

SilverLight and HTML support with Localization and RTL with SAP Crystal Rep

Hi ,
Can you please provide the fallowing information ,
1)     Silverlight:-
a)     Does SAP Crystal Reports support , building reports with Silverlight?
b)     Does SAP Crystal Reports has   Silverlight Designer and Viewer support the fallowing list of languages:-
Arabic
Czech
Danish
Dutch
English
Estonian
Finish
French
German
Greek
Hungarian
Italian
Latvian
Norwegian
Polish
Portuguese
Rumanian
Russian
Spanish
Swedish
Turkish
Ukraine
China
c)     Does this support RTL format ?
2)     HTML:-
a)     Is there any support of Designer and Viewer to create HTML reports?
b)     If there is a support of creating HTML reports , is there any support for above listed languages?
c)     How about RTL support in case of that?.
Thanks,
Prasanna

Hi ,
Thanks for providing the information , need more infomation towards creating HTML reports. I didnt understand the fallowing answer
Is there any support of Designer and Viewer to create HTML reports?
- Yes. Export to HTML 3.2 and 4
What i mean about support of Designer and Viewer to create HTML reports is , using SAP crystal reports tools , i must be able to design a HTML report and use the report in WebPages .
I mostly think this can be achieved and supported , however i need some kind of acknowledgement at this point of time.
**Also my concentartion is more on getting information on Supporting Localization for the listed languages.If you suggest some blog or forum link which demonstrates on Localization , i would appreciate , if you add infortmation on that like , lif the approach you are suggesting is generic to accept any type of language with RTL(Right To Left format) support**
Thanks.

JEditorPane and more html support?

Does anyone know if Sun is planning on expanding the html support of the JEditorPane?

Recently there was a postin the JavaHelp interest mailing list saying that the Swing team is looking into probably enhancing the text and html package for Java version 1.5...

Anychart 5 integration kit for APEX

Hello,
Just wanted to write a quick post to tell everybody we released the Anychart 5 integration kit for APEX a couple of days ago.
I know a lot of you already tried to integrate a later version of Anychart, the kit (which is free - but you need an Anychart 5 license) should make this more easy for you.
You can find more information about the kit at http://dgielis.blogspot.com/2008/11/anychart-5-integration-kit-for-apex.html or see the examples at http://anychart.apex-evangelists.com
Hope you all like it.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

Hello Chris,
I'll try to do that in the next days or early next week. I'm creating another example of such a map.
In the meantime you can have a look here: http://anychart.apex-evangelists.com/pls/apex/f?p=454:13:0
Look at the region source. You basically create a 2D Column chart and change the select like I did:
select null link, REGION label, SALES "{n:Sales;tr:t1}"
from STATE_SALESFor the region source you can change it to the new Anychart 5:
<anychart>
    <charts>
        <chart plot_type="Map" use_anychart3_data_model="true" use_sets_colors="false">
<thresholds>
                        <threshold name="T1" palette="P1" range_count="3" type="EqualSteps"
                                        auto_value="{%Value}"/>
                </thresholds>
                <palettes>
                  <palette name="P1">
                    <item color="#E06232" />
                    <item color="#E0D231" />
                    <item color="#6CAC32" />
                  </palette>
                </palettes>
            <data_plot_settings>
                <map_series source="states.amap">
                    <defined_map_region>
                        <label_settings enabled="true">
                            <format><![CDATA[{%Name}]]></format>
                            <background enabled="false"/>
                            <font size="9" color="#292929"/>
                        </label_settings>
                        <tooltip_settings enabled="true">
                            <format><![CDATA[{%REGION_NAME} ({%Name}) - ${%Value}
{numDecimals:0}]]></format>
                        </tooltip_settings>
                    </defined_map_region>
                    <grid>
                        <parallels enabled="false"/>
                        <meridians enabled="false"/>
                        <background enabled="false"/>
                    </grid>
                </map_series>
            </data_plot_settings>
            <chart_settings>
                <title>
                    <text>USA Sales Map</text>
                </title>
            </chart_settings>
    #DATA#
        </chart>
    </charts>
</anychart>Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

HTML Editors and Greek Language

Hi all,
When using the HTML Editor the value that is stored in the database
is
&Delta &epsilon &nu &upsilon &pi ά&rho &chi &epsilon &iota&alpha &pi ό&theta &epsilon &mu &alpha (Deleted ; in the end of each character so that I can show you what I mean).
instead of Δεν υπάρχει απόθεμα
This doesn't happen when I use text item or text area.
Can I do something about it?
APEX version 3.1.0.00.32
Thanks in advance

Peggy,
FrontPage 97 / 98 have both worked really well for us, however we
discovered a slight hitch with 98 where the Editor would gobble up
<?FORTE ..> tags inside the SELECT OPTION tag, but you can work around
that one, apart from this FP98 is a great HTML editor. I also thought
HotMetal was a good fit.These observations come out of evaluating about
5-6 leading HTML editors.
Some recommended steps in the process:
1) Create a prototype by laying out all the HTML using an Editor. Figure
out all the navigation within your web. More recent features seen in
HTML editors such as JavaScript generation and DHTML / CSS support are
really difficult to work out on your own, let the advanced Editors do as
much dirty work for you as poss.
2) Once the prototype is finalized, for all the pages requiring any
dynamic content generation, figure out all the Tag Handlers you will
need. Change the HTML Content by inserting the FORTE tags as required,
code the corresponding Handlers.
3) Figure out the relation between page requests and the security
requirements for your pages, design the Session properties and data
tracing across requests using the Session object.
4) Do refer to all the Tech Notes on the Forte web site for known
issues.
As for the Java applets frontend, we have used Java - IIOP - Forte since
early beta through every Forte release (3.0.X) and it works fine with
WebEnterprise and release 30f2.
- Sameer
From: Peggy Lynn Adrian <[email protected]>
Date: Wed, 07 Jan 1998 15:19:58 -0500
Subject: WebEnterprise - HTML Editors and Java
I'd like to know any opinions on HTML editors and their use with
WebEnterprise. Have any of you done
evaluations to determine the best editor to use with the Forte
product? Also,
do you have experience using
a Java applet as the front-end to a Forte service object? In this
instance,
are you able to do so with Forte 30f2 and
WebSDK?
Thanks,
Peggy Adrian
Eli Lilly and Company

Firefox 3.5 and Apex 3.2 on Windows 2003 Server 32-Bit using Oracle 9.2.0.8

I can't seem to use firefox at all. IE works like a champ, but I get nothing from firefox, just the web page with an iconless login which doesn't do anything when I try to log in.

Interesting. I've been using APEX 3.2 with Firefox 3.5 for several months now without any issues and I know several other developers doing the same. Can you test it from another client machine to see if it's something with the PC or the install of Firefox? You might also try [a href="http://portableapps.com/apps/internet/firefox_portable"]Firefox 3.5 Portable[a], as it will basically give you a clean, fresh install of 3.5 without uninstalling your current 3.5. Just make sure you close all instances of Firefox before you start up the portable one.
On a totally unrelated note, just wanted to make sure you know the 9.2 is no longer a supported database (unless you pay for extended support) and the upcoming 4.0 release of APEX will not work with 9.2 at all.
Tyler Muth
http://tylermuth.wordpress.com

How do I create an Lightroom HTML Gallery and preserve the - in the file name?

How do I create an Lightroom HTML Gallery and preserve the - in the file name?
The hyphen (-) is more search engine friendly, so I label all my photos using hyphens (-) to separate the keywords in the file name
Here's a sample file name - it's for the "Guess Where Berkeley" flickr site
guess-where-berkeley-serkes-xx-s-curve.jpg
I created a Lightroom HTML Gallery and posted it to the following link.
http://www.berkeleyhomes.com/tests/lightroom/lightroom-test-1/
Though it looksl like the HML gallery shows the original file name in the web page, it looks like Adobe Lightroom modified each photo's file name by changing the - (hyphen) to an underscore (_)
Originally
guess-where-berkeley-serkes-xx-s-curve.jpg
After Adobe created the HTML photo gallery the name became
guess_where_berkeley_serkes_xx_s_curve.jpg
Is there any way to preserve the – rather than the _ character
Thank you!
Ira Serkes

InDesign's interactive PDF support is a small subset of what you can do in Acrobat Profesional.
I think you probably want to create a button (or change an existing button) in Acrobat Pro that causes Acrobat to close the document -- that should be analagous to "exitting the CD." I assume your autorun file is opening the PDF in Adobe Reader? You have not included it and are not specific, so it is tough to say.
I believe in Acrobat Javascript you can close the document with this.closeDoc(). You'll probaly need to ask on the Acrobat forums (possiby Acrobat Scripting) for more detail.

Every time I click to update an application I get a window "Download Error" it gives me the option to "Contact customer support" and a link "Reload Applications"

Every time I click to update an application I get a window "Download Error" it gives me the option to "Contact customer support" and a link "Reload Applications"

Sal Sabaj, Would ask you to follow the suggestions mentioned under the below article and check if that helps.
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Let us know in case you still get that issue.
Regards
~ Arpit Kapoor

Highlighted info in html editor and sending it in an email

Is there a way to take everything that is highlighted in the html editor and send in an email?
Either in the body of the default email client or as attachment in apex.mail or email client?
Thanks.

Hello,
Maybe this link can help you: http://javascript.internet.com/page-details/highlighted-text.html
I've been looking at the FCK Editor (which is what APEX is using) Javascript API's but didn't find a solution that quick, but my guess it's somewhere in there too.
Nevertheless the above link provides you with something that works as well.
Hope you like it.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

CR Reports 2008: Space Between HTML Attribute and Value Causes Attribute To Be Ignored

I have a field in a report with its Text interpretation set to "HTML Text". When content is rendered in that field that was sourced from a Microsoft Word document, some of the attributes seem to be ignored by Crystal.
For example, I have observed with "style" attributes that if there is a space between the attribute and the value, e.g. "FONT-FAMILY: SimSun" then Crystal will not render the Asian characters, replacing them with squares. However, if I manually remove the space so that the attribute appears as "FONT-FAMILY:SimSun", then the characters properly render as expected. I have observed the same issue with at least one other attribute as well, "FONT-SIZE".
This html does render properly in various browsers, so it seems to be an issue with Crystal Reports. Can you provide me with information about this and if there is a fix for it in subsequent versions. The version I tested with is 2008 - 12.5.0.1190.
Thanks for any assistance that you can provide.

hi Ethan,
here are the list of supported html tags in text interpretation...font family is indeed a supported tag.
does the html appear properly in the designer?...you mentioned various browsers and am wondering if you mean the crystal web viewers?
if the issue is in your cr designer, you may wish to patch it to the latest level.
also, ensure that you do not have any unsupported tags in your html that may be causing an issue.
-jamie
html
body
div (causes a paragraph break)
tr (causes only a paragraph break; does not preserve column structure of a table)
span
font
p (causes a paragraph break)
br (causes a paragraph break)
h1 (causes a paragraph break, makes the font bold & twice default size)
h2 (causes a paragraph break, makes the font bold & 1.5 times default size)
h3 (causes a paragraph break, makes the font bold & 9/8 default size)
h4 (causes a paragraph break, makes the font bold)
h5 (causes a paragraph break, makes the font bold & 5/6 default size)
h6 (causes a paragraph break, makes the font bold & 5/8 default size)
center
big (increases font size by 2 points)
small (decreases font size by 2 points if it's 8 points or larger)
b
i
s
strike
u
The supported HTML attributes are:
align
face
size
color
style
font-family
font-size
font-style
font-weight
In Crystal Reports 2008 Service Pack 2 and above, the following additional HTML tags and attributes have been added to the supported list:
The supported HTML tags are:
ul ( bulleted list )
ol ( ordered list )
li ( tag defining a list item used for both list type: ul and ol. )
Important Note: The bullet will not show up as a regular size bullet, but as a small dot.
The supported HTML attributes are:
strong ( bold )

Question on passing value to an HTML page and dynamic links

Hi,
I just started using Oracle APEX and have the following questions:
1) I try to pass an order number from a report page to a blank HTML page that is supposed to be a shipping label. I cannot have the HTML page resolve the placeholder within HTML code to actual order number. I have tried %P2_ORDER_ID%, #P2_ORDER_ID# or &P2_ORDER_ID. Any suggestions?
2) I have a column with link in a report page and I want the link to go to different pages based on the value of that column. How should I do that?
Thanks!
Mike.

Hi All,
Im still trying to think about this the right way.
If I add a servlet to the C2 project and use HTTP post from the HTML page and have the 2 variables in the servlet, could I then either set the variables on the session bean in order to make them available to my searchResults.jsp bean methods?
Regards
Jim

Problem in generating HTML tables in apex

Hi friends,
I coulnt able to generate an email in the HTML table format with a background color since im receiving only in a plain text manner.
The below is the coding only based on HTML in which i can able to view it in the HTML tables and this is it
<html>
<head><title>Report 1</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<base href="http://erpdev01.ti.com:7777/pls/apex/" />
<style type="text/css">
table.apex_ir_html_export {
background-color:#F2F2F5;
border-width:1px 1px 0px 1px;
border-color:#C9CBD3;
border-style:solid;
table.apex_ir_html_export td {
color:#000000;
font-family:Tahoma,Arial,Helvetica,Geneva,sans-serif;
font-size:9pt;
background-color:#EAEFF5;
padding:8px;
background-color:#F2F2F5;
border-color:#ffffff #ffffff #cccccc #ffffff;
border-style:solid solid solid solid;
border-width:1px 0px 1px 0px;
table.apex_ir_html_export th {
font-family:Tahoma,Arial,Helvetica,Geneva,sans-serif;
font-size:9pt;
padding:8px;
background-color:#CFE0F1;
border-color:#ffffff #ffffff #cccccc #ffffff;
border-style:solid solid solid none;
border-width:1px 0px 1px 0px;
white-space:nowrap;
</style>
</head>
<style type="text/css">
body{font-family: Arial, Helvetica, sans-serif;
                    font-size:10pt;
                    margin:30px;
                    background-color:#ffffff;}
span.sig{font-style:italic;
font-weight:bold;
color:#811919;}
</style>
</head>
<body>
<table border="0" cellpadding="0" cellspacing="0" class="apex_ir_html_export">
<thead><tr><th id=></th><th id=></th></tr></thead>
<tr>
<td>Employee Number</td>
<td>:P36_EMPLOYEE_NUMBER</td>
</tr>
<td>Reason</td>
<td>:P36_REASON</td>
</tr>
<td>Position Title</td>
<td>:P36_POSITION_TITLE</td>
</tr>
<td>Qualification Displayed</td>
<td>:P36_QUALIFICATION_DISPLAYED</td>
</tr>
<td>Qualification Title</td>
<td>:P36_QUALIFICATION_TITLE</td>
</tr>
<td>Mobile Number</td>
<td>:P36_MOBILE_NUMBER</td>
</tr>
<td>Desk Number</td>
<td>:P36_DESK_NUMBER</td>
</tr>
<td>Fax Number</td>
<td>:P36_FAX_NUMBER</td>
</tr>
<td>Email Address</td>
<td>:P36_EMAIL</td>
</tr>
<td>Effective Date</td>
<td>:P36_EFFECTIVE_DATE</td>
</tr>
<td>Location</td>
<td>:P36_LOCATION</td>
</tr>
<td>Type-I</td>
<td>:P36_TYPE1</td>
</tr>
<td>Type-II</td>
<td>:P36_TYPE2</td>
</tr>
<td>Status</td>
<td>:P36_STATUS</td>
</tr>
</table>
</body>
</html>
kindly ignore div class="jive-quote" and div
as it is generated by the forum software in the above coding. The above is working perfectly as i can able to see it in the table manner with a background color.
The same thing it needs to work on in apex while clicking the button, the html table with contents has to be send as an email when an button is pressed, i tried with the below coding, but i couldnt able to see the HTML table with a background color, it is showing in the plain text only. it is not showng html table with a background color in it. This is the coding.
DECLARE
l_mail_id NUMBER;
l_body VARCHAR2(4000);
l_body_html VARCHAR2(4000);
BEGIN
l_body_html := '<html>'||
' <head><title>Report 1</title>'||
'<meta http-equiv="Content-Type" content="text/html; charset=utf-8">'||
'<base href="http://erpdev01.ti.com:7777/pls/apex/" />'||
'<style type="text/css">'||
'table.apex_ir_html_export {'||
'background-color:#F2F2F5;'||
'border-width:1px 1px 0px 1px;'||
'border-color:#C9CBD3;border-style:solid;}'||
'table.apex_ir_html_export td {'||
'color:#000000;'||
'font-family:Tahoma,Arial,Helvetica,Geneva,sans-serif;'||
'font-size:9pt;'||
'background-color:#EAEFF5;'||
'padding:8px;'||
'background-color:#F2F2F5;'||
'border-color:#ffffff #ffffff #cccccc #ffffff;'||
'border-style:solid solid solid solid;'||
'border-width:1px 0px 1px 0px;'||
'}'||
'table.apex_ir_html_export th {'||
'font-family:Tahoma,Arial,Helvetica,Geneva,sans-serif;'||
'font-size:9pt;'||
'padding:8px;'||
'background-color:#CFE0F1;'||
'border-color:#ffffff #ffffff #cccccc #ffffff;'||
'border-style:solid solid solid none;'||
'border-width:1px 0px 1px 0px;'||
'white-space:nowrap;'||
'}'||
'</style>'||
'</head>'||
'<style type="text/css">'||
'body{font-family: Arial, Helvetica, sans-serif;'||
                    'font-size:10pt;'||
                    'margin:30px;'||
                    'background-color:#ffffff;}'||
'span.sig{font-style:italic;'||
'font-weight:bold;'||
'color:#811919;}'||
'</style>'||
'</head>'||
'<body>'||utl_tcp.crlf;
l_body_html :=
'<table border="0" cellpadding="0" cellspacing="0" class="apex_ir_html_export">'||
'<thead><tr><th id=></th><th id=></th></tr></thead>'||
'<tr><td>Employee Number</td><td>'||:P36_EMPLOYEE_NUMBER||'</td></tr>'||
'<tr><td>Reason</td><td>'||:P36_Reason||'</td></tr>'||
'<td>Position Title</td><td>'||:P36_POSITION_TITLE||'</td></tr>'||
'<td>Qualification Displayed</td><td>'||:P36_QUALIFICATION_DISPLAYED||'</td></tr>'||
'<td>Qualification Title</td><td>'||:P36_QUALIFICATION_TITLE||'</td></tr>'||
'<td>Mobile Number</td><td>'||:P36_MOBILE_NUMBER||'</td></tr>'||
'<td>Desk Number</td><td>'||:P36_DESK_NUMBER||'</td></tr>'||
'<td>Fax Number</td><td>'||:P36_FAX_NUMBER||'</td></tr>'||
'<td>Email Address</td><td>'||:P36_EMAIL||'</td></tr>'||
'<td>Effective Date</td><td>'||:P36_EFFECTIVE_DATE||'</td></tr>'||
'<td>Location</td><td>'||:P36_LOCATION||'</td></tr>'||
'<td>Type-I</td><td>'||:P36_TYPE1||'</td></tr>'||
'<td>Type-II</td><td>'||:P36_TYPE2||'</td></tr>'||
'<td>Status</td><td>'||:P36_STATUS||'</td></tr></table>'||utl_tcp.crlf;
l_body_html := l_body_html ||'<p>Thank you for your interest in the <strong>APEX MAIL</strong></p>'||utl_tcp.crlf;
l_body_html := l_body_html ||' Sincerely,
'||utl_tcp.crlf;
l_body_html := l_body_html ||' <span class="sig">The APEX Dev Team</span>
'||utl_tcp.crlf;
l_body := 'Request for an Salary Certificate Request'||utl_tcp.crlf;
l_mail_id := apex_mail.send(
p_to => '<[email protected]>',
p_bcc => '<[email protected]>',
p_from => :P36_EMAIL,
p_body => l_body,
p_body_html => l_body_html,
p_subj => 'Salary Certificate Request With Request No' ||:P36_DIS_REQ_ID
apex_mail.push_queue();
END;
kindly ignore div class="jive-quote" and div in the above codings too.
Why it is not generating in a table via email, what is the issue.
Thanks
Saro.
Edited by: Saro on May 17, 2011 12:50 PM

Hello Saro,
first of all: the html code you are generating is not valid html. There is no closing body and html tag. Ther eis one closing head tag to much. In your table many opening row tags are missing.
second: have a closer look at what you are doing with your variable l_body_html. At first, you add your styles to it and then you overwrite it with your table instead of adding it.
Regards,
Dirk

Images in HTML forms and/or reports

Hi,
Apologies if a stupid question, but can you display a combination of data and image content in Portal HTML forms and/or reports? If so, how?
This question assumes that the image in question is browser-supported (e.g. gif file), and the link to it is in the same database table as the data being reported (as a bfile data type).
Alternatively, what if the image was actually directly stored in the database table as a BLOB data type?
Help!
Cheers, Jeff

Hi Sharmila,
Thanks for the info!
Would this also work if the image wasn't a blob, but instead just stored on the filesystem (as a gif file), with the reference to it stored in the database as a bfile datatype?
Thanks once again, Jeff
Hi,
You can build portal forms to upload images. You can use blob columns here. You can also have images in a report. This will be the SQL to query data from tables having intermedia data.
Select a.empno,a.ename,a.mgr,a.sal,
portal30.wwv_user_utilities.get_intermedia('EMP','EMP_AUDIO','AUDIO',a.rowid)
the_audio, b.dname,b.loc,
portal30.wwv_user_utilities.get_intermedia('DEPT','DEPT_PICTURE','IMAGE',b.rowid) the_picture
from emp a, dept b
where a.deptno = b.deptno
The table should have the ordimage column type.
Thanks,
Sharmila

AnyChart 6 (HTML Support) and APEX?

Similar Messages

Maybe you are looking for