Anyconnect 2.4.012 with Windows 8

Has anyone had any luck getting the anyconnect client ver 2.4.012 to work inside of Windows 8. I have tried the registry hack that renames the adapter name, tried running as Administrator and compatability settings. Nothing works. Evertime I run it it says the Client driver has encountere an error followed by Unable to establish VPN. Oh yeah I also tried to install the certificate after the message asked for it. Although I never had to do that in Windows 7. Still nothing. Anyone have any ideas?
Thanks

Never mind. The registry hack that has you rename the Display adapter worked. You have to name it "
Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64" exactly as is appears. Nevermind the fact it is a 32 bit client. Go figure.

Similar Messages

Anyconnect fails to connect with a message that it tried to set a specific MTU but it was already enabled with a different MTU - (SOLVED)

Cisco Anyconnect 3.1.05160 fails to setup the VPN tunnel, it prompts with this message:
"The VPN client driver encountered an error. Please restart your computer or device, then try again."
Authentication and everything seems to go through but it won't work.
The computer is a brand new HP with Windows 7. I have treid first with some later 2.x Anyconnect with same result.
The follow entries are printed in the event log:
Level Date and Time Source Event ID Task Category
Error 2014-05-10 16:19:28 acvpnagent 2009 None Termination reason code 13:
Unable to start VA, setup shared queue, or VA gave up on shared queue.
Error 2014-05-10 16:19:28 acvpnagent 2 Engineering Debug Details Function: CVpnMgr::main
File: .\VpnMgr.cpp
Line: 1847
Invoked Function: IHostMgr::enableHostMgr
Return Code: -23592949 (0xFE98000B)
Description: HOSTMGR_ERROR_ALREADY_ENABLED_WITH_DIFFERENT_MTU:An attempt was made to enable the tunnel's network interface with a specific MTU but it was already enabled with a different MTU.

This was caused by the good old HP mess-up-your-computer services.
Disable the service "HP Device Locking / Auditing" and the VPN will be able to connect.

Cisco ACS 5.4 + Anyconnect 3.1 NAM with 802.1x, problem with changing ACS Radius user password

Dear all,
Presently, we are testing 802.1x using Cisco ACS 5.4 and Cisco Anyconnect v3.1 as 802.1x supplicant. We have created predefined NAM profiles (with Cisco Profile Editor) and applied as default in on our test machine. We are using PEAP (MsCHAPv2) and ACS local user credentials for authenticating process. We have noticed that, when we try to authenticate the network with predefined profile (network profile has Administrator Network privileges) and Windows user on test machine has no Admin privileges we are not able to change ACS user password (checked "Change password on next login" in the ACS user profile). In the Monitoring and Report View we get Failure Reason "24203 User need to change password" but no popup window apears in Anyconnect. When we change Windows local user privileges to Admin or create Anyconnect network profile localy (privileges User Network) then, we are able to finish the process.
Have you ever been facing the problem described above. Is it Anyconnect bug? How can we fix it?
Best regards,
Piotr

If this happens with all machines then if a microsoft guy can look the app logs/privileges. It seems the app is requesting privilege that it is not authorized to and that's why the propmt window fails to appear. If we know what that privilege is we can probably fix it. If that privilege is not even required for smooth work Cisco need probably to fix this behavior.
I am sorry if I am not able to help but I am not using the anyconnect for production.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

Connection attempt failed. Please try again. Cisco AnyConnect Secure Mobility Client on Windows XP SP3 -

When trying to connect with Cisco AnyConnect Secure Mobility Client on Windows XP SP3 getting the following error:
Function: CTransportWinHttp::SendRequest
File: .\CTransportWinHttp.cpp
Line: 1170
Invoked Function: HttpSendRequest
Return Code: 806 (0x00000326)
Description: WINDOWS_ERROR_CODE
Function: CTransportWinHttp::SendRequest
File: .\CTransportWinHttp.cpp
Line: 1178
Invoked Function: CTransportWinHttp::handleRequestError
Return Code: -30015479 (0xFE360009)
Description: CTRANSPORT_ERROR_UNEXPECTED
and finally I get the following message:
Function: ConnectMgr::processIfcData
File: .\ConnectMgr.cpp
Line: 2763
Invoked Function: ConnectMgr::processIfcData
Return Code: -30015443 (0xFE36002D)
Description: CTRANSPORT_ERROR_CONN_UNKNOWN
Connection attempt failed. Please try again.
Any ideas, thanks,
Ashok.

Hi Harry,
I only wish I were more up to speed on all of the security technology. I will contact the network administrator and pass your request to him. I will let you know the results (probably later today).
Here is a little background on this issue (optional reading). All clients worked fine up until around the end of September 2013. Then, a rash of Windows updates came along. Around Sept. 20th, I noticed I could no longer connect using the VPN. So, I uninstalled (Mobility Client) but was not able to re-install as the https://site was not longer able to be reached. I got the standard Microsoft 'Diagnose Connection Problems'. So I manually installed the 'Mobility Client' but only get errors. However, I'm only guessing at the 'AnyConnectProfile.xml'. I may have the settings all wrong. Don't know.
We also noticed that all of our Windows 7 clients work fine. None of the Windows XP clients work any longer. I figured it was 'time to upgrade' all of our Windows XP clients.
Regards,
Stan

AnyConnect Client (3.1.02040) - Windows 8 won't shut down

I've noticed and issue with Windows 8 and AnyConnect Client version 3.1.02040. I've tried various things to try to resolve this issue but have hit a brick wall. Whenever, I run AnyConnect on my Windows 8 PC and then shut it down for the day, the PC won't turn off. I've ensured my AnyConnect client is disconnected and then quit the application and even killed the VPN service.
Has anyone else seen this issue??? Any resolution???

I also have the same problem. There is a few things that I have noticed...
1. If you disable the Network List Service and the Network Location awareness Services and reboot, this problem does not occure. However, when you disable these services, you are no longer able to manager you network connections.
2. There are many errors that appear in the cisco anyconnect secure mobility client event log
System
Provider
[ Name]
acvpnagent
EventID
2
[ Qualifiers]
9216
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-02-28T20:36:21.000000000Z
EventRecordID
942
Channel
Cisco AnyConnect Secure Mobility Client
Computer
PC2578.swgao.int
Security
EventData
Function: CThread::invokeRun File: .\Utility\Thread.cpp Line: 435 Invoked Function: IRunnable::Run Return Code: -32112629 (0xFE16000B) Description: BROWSERPROXY_ERROR_NO_PROXY_FILE
Provider
[ Name]
acvpnagent
EventID
2
[ Qualifiers]
9216
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-02-28T20:36:21.000000000Z
EventRecordID
940
Channel
Cisco AnyConnect Secure Mobility Client
Computer
PC2578.swgao.int
Security
EventData
Function: CVirtualAdapter::IsVAEnabled File: .\WindowsVirtualAdapter.cpp Line: 2685 Invoked Function: CVirtualAdapter::IsVAEnabled Return Code: -33554423 (0xFE000009) Description: GLOBAL_ERROR_UNEXPECTED Unexpected VA status bits, 25174019
System
Provider
[ Name]
acvpnagent
EventID
2
[ Qualifiers]
9216
Level
3
Task
1
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-02-28T20:36:21.000000000Z
EventRecordID
936
Channel
Cisco AnyConnect Secure Mobility Client
Computer
PC2578.swgao.int
Security
EventData
Function: CVAMgr::cleanupAddress File: .\VAMgr.cpp Line: 2449 Invoked Function: CNetshDeleteAddress::Run Return Code: -31064051 (0xFE26000D) Description: NETSHCOMMAND_ERROR_PARSE_FAILED
I'm not sure what anyconnect is doing, but it appear when disconnecting something is prevting it from resetting all of the network settings.

Syncing iphone with windows 7 contacts - error message outlook.pst not foun

I have set set up ITunes to sync my Iphone GS with Windows Contacts. When I sync I get an error message :
The file c:\Program Files\Common Files\System\Mapi\1033\Outlook.pst could not be found
Sometimes the error message comes up 2 or 3 times.
Secondly, my Iphone is syncing with something because an old version of my windows address book is now on my iphone. Of course if I add a new contact to Windows Contacts, it does not appear on my iphone.
I dont have Outlook installed on my PC. It was removed, but I guess I do have an old outlook.pst file from my old times with Windows XP.
So how does Itunes manage the sync and how can I stop it syncing with my old address book and use Windows Contacts? I have tried resetting my sync history but it did not work.
I am running Windows7 (upgrade from Vista).

I am also having issues with syncing my Iphone 3GS with the latest version on Itunes. I have for a long while now been doing just great. My contacts, phone numbers, emails have all synced very nicely, no problems. As soon as I downloaded the new Itunes 9.1 I can no longer sync contacts, and calendars, as usual.
I tried several things that were suggested to me in the troubleshooting but nothing has helped. It usually tells me that my computer is not set up for syncing, and after arranging that it still doesn't work. As well, it says it cannot find the requested services.
Please help.
I am running windows 7, and have been for a while, it's not windows 7, it's the new Itunes upgrade.

IPod Classic - ok with Windows, not with iTunes

Hi,
I have a Classic 160GO iPod.
Suddenly this problem appeared :
- no music or pictures were recognized by my iPod, but the disk space was used for "Other"
- this iPod is not known with iTunes
- This iPod is known as a removable hard disk, via Windows 7 (Main computer), Windows XP (secondary computer), a linux thing (a friend computer).
1. I already checked this iPod with the diagnostics mode (see https://discussions.apple.com/message/19048752#19048752)
result is :
- reallocs : 0
- Pending sectors : 32
My understanding is that my iPod hard disk is ok and valid.
2. I followed most of the recommended way to repaird the iPod as per Support (8 out of 10)
NOthing is working.
I confirm I have installed the latest version of iTunes.
3. I read the following page : https://discussions.apple.com/message/19158071#19158071 to find the relevant firmware.
But the iPod Classic 160GO is not in the list.
My questions
--> Do you have an idea to solve my problem ?
--> What could happend i I format my iPod with windows ? It would be only a hard disk after, wouldn't it ?
--> I f I format, is there a solution to re-install the iPod software (= firmware ?)
Thank you for your help.

The iPod hardisk is looks new from the Reallocs and ON Hours, but, it is rebooting more to get the correct spin for data verification, causing tImeouts, so the Pending Sector will increase.
There maybe something, near the iPod environment, that is causing the drive to fail, and overheat, if it has not already been damaged, or maybe it is just one Hardisk, that slipped through poor quality control.
You can bring the Retract, Realloc and pending number low, by doing low level format, see this article, but your problem of Hardisk rebooting to find a good cluster, wont go away
Just my thoughts.
Magnets are the primary cause of hardisk crashes, I would also suspect, using your handphone, while it is near the iPod would also be bad, see the YouTube video on hardboiled eggs using handphone.

Does a 7th generation ipod nano work with windows 8?

we bought a new HP laptop with Windows 8 and are having difficulties wtih our 7th generation Ipod nano's not being recognized by the computer. Is Windows 8 compatible with the Ipod nano 7th generation?

Hello LCREW,
The article linked below provides some useful troubleshooting steps that can help get your iPod to appear in iTunes.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Cheers,
Allen

Does the Ipod Nano work with Windows XP SP1???

I studied the system requirements for the ipod nano and there was written, that I need a WinXP with SP2 for it.
Because I use Sound-Software that only works with Windows XP SP1 I have to keep this system, and I now would like to know if that works. Could anyone answer this question??

Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

IPod Nano Video with Windows Movie Maker

I found this page by Apple that explains how to use video from the 5G iPod Nano, http://support.apple.com/kb/HT3837
But, I cannot find Windows Movie Maker V2.5, and V2.1 with Windows XP will not import the video from the iPod Nano. Anybody have any ideas on how to solve this? (Besides buying a Mac...)
Also, Windows Media Player 11 will not play the video created with the 5G iPod Nano either.
Message was edited by: trubol

You can use the AVS Video Editing software to import MPEG-4 Movie files in the same way you'd import .avi files into Windows Movie Maker. Also, the AVS Video Editor will allow you to import iTunes .mp4 audio files and incorporate them into your soundtrack. If you still want to use Windows Movie Maker for your video editing you can also use video conversion software from the same company, i.e. AVS Video Converter 6, to convert from MPEG-4 into .avi or .wmv format. I've found converting to .wmv to be considerably slower than converting to .avi though. Here's a link to the AVS video software offerings below. BTW, the AVS Video Editor can be used for free, while there's a charge for the Converter.
* As always, exercise caution when using Shareware. So far my own experience has been good.
http://www.avs4you.com/AVS-Video-Editor.aspx?type=GoogleAdWordsSearch&gclid=CMKa 0-yPqp8CFQ975QodU24Y1Q

Ipod sync issues with Windows 7

I just purchased a new computer with the Windows 7 operating softeware and now I cannot sync my Ipod Touch (3rd generation) but I do not experience this issue with my old computer with Windows Vista. When I need to update my Ipod I have to connect it to my old computer. Help. I do not want to pay Apple for support when I see countless post about this issue.

Diane Wordsmith wrote:
Are you set to manually manage on both computers? If not, an auto sync on one of them will erase the iPod and place that computer's library on it.
No that wouldn't be it. The manual vs. Auto sync setting is stored on the iPod, not on iTunes. So if you take a manually managed iPod and plug it into an iTunes it has never connected to before, the new iTunes will still recognize the iPod as manually managed and not do anything bad to it (in theory).
Patrick

Recognizing an iPod with Windows Vista

I have a new computer that came with Windows Vista. I have not been able to get iTunes to operate correctly for Windows Vista to recognize the USB connection to my iPod. Anyone have a patch or downloadable software suggestion to resolve this?

groans
I finally figured I had nothing to lose--I'd just downloaded a new version of Real Player, which supposedly will work with iPods and Windows Me--and I let my computer format the iPod, hoping that would let it work with Windows again. Apparently not. Now it won't turn on--it's giving me the folder-and-exclamation-point icon. Resetting it didn't help, and I can't restore it because I can't install the software to my computer in the first place.
I suppose the only thing to do is borrow a friend's computer or something.

Error 2356 with windows vista 64bit

I have had Itunes and Quicktime working fine but suddenly quicktime was nt working giving me an end program error when i need to play anything so i decided to reinstall Itunes and Quicktime but it started to even give me an error uninstalling them but i managed to manually uninstall them and delete even the reg files but when i try to installl any of them now its gives me an 2356 error
Please advise?

Unfortunately, I tried every solution on the page (including restoring) and it still doesn't work. I thought the problem was because of a bad video file that iTunes warned me to delete, but that doesn't work at all.
There has to be an issue with Vista. The iPod worked just fine on my Dell with Windows XP. As soon as I switched computers, it stopped working. What issues does iPod have with Vista?

Ipod touch with windows vista

Hi,Im looking into geting the ipod touch,but I have read that the ipod touch does not work well with windows vista. I know the new itunes 7.5 just came out. Has that version fixed the problems with the ipod? Also what are the problems the ipod touch is haveing with vista. I have windows vista 32 bit OS. Thank you very much for your help.

Hey, yeah I have major problems syncing to Vista. The album artwork is assigned to the wrong songs or sometimes a chunk of the picture is not in the right place, some of my songs stop half way through the song then the iPod skips to the next song on the list. My movies periodically decide to crash and the only way to get past these spots is to skip ahead (which is very difficult on the iPod touch especially when the movie is long cause you dont want to miss too much) but yeah just letting you know that there ARE some issues with it not saying that yours will do the same but it might.

Error ~69 with Windows Vista?

I just purchased a new Gateway with Windows Vista to replace my Dell with XP. Ever since I purchased my Gateway, I am unable to sync any iTunes purchases or material imported from CDs to my iPod 30GB. I keep receiving the ~69 message "Unable to sync to iPod. An unknown error occurred. (~69)." Following this error, the iPod only seems to sync the songs that I've recently played on my iPod when it's been disconnected from my computer.
Is this a problem with my iPod, Vista, or some combination of the two? I do not see any songs that should be causing a problem, and my entire library synced with no problems on the Dell XP machine.

Unfortunately, I tried every solution on the page (including restoring) and it still doesn't work. I thought the problem was because of a bad video file that iTunes warned me to delete, but that doesn't work at all.
There has to be an issue with Vista. The iPod worked just fine on my Dell with Windows XP. As soon as I switched computers, it stopped working. What issues does iPod have with Vista?

Anyconnect 2.4.012 with Windows 8

Similar Messages

Maybe you are looking for