[Anyconnect 3.0] "The VPN client driver has encountered an error"

Hi,
A computer get the following error when trying to connect: "The VPN client driver has encountered an error."
In setupapi.log, we got this error:
#-147 Loading class installer module for "Cisco AnyConnect VPN Virtual Miniport Adapter for Windows".
#E358 An unsigned or incorrectly signed file "C:\WINDOWS\system32\NetCfgx.dll" for driver "Cisco AnyConnect VPN Virtual Miniport Adapter for Windows" blocked (server install). Error 0x800b0100: No signature was present in the subject.
#E161 Processing of call to class installer failed. Error 0x800b0100:
No signature was present in the subject.
I already tried those solutions :
- install this fix http://support.microsoft.com/kb/822798
- repair catalog system http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00809b4754.shtml#asdqw
Do you know a solution?
Thanks for your help,
Patrick

Kashish,
The user who got this problem solved it by replacing C:\WINDOWS\system32\NetCfgx.dll by another NetCfgx.dll file.
He downloaded it from Internet (users don't fear )) but I would advice you to pick one from another computer...
I think that his computer was corrupted...
HTH
Patrick

Similar Messages

AnyConnect Secure Mobility Client v3.1.04066 "The VPN client driver encountered an error"

Hello, I am a software engineer and have been trying to connect to my client's VPN using the AnyConnect Secure Mobility Client (version 3.1.04066) and keep receiving the error "The VPN client driver encountered an error. Please try again or restart your system."
I am on a Windows 7 system with an intel i7-2670QM cpu. My computer model is an HP Pavilion dv7.
I have tried uninstalling the software, re-installing it. I've tried restarting my system multiple times through the process. I've checked the registry and made sure the name was setup correctly. I have checked and made sure that the correct services are not enabled. I have also tried what was suggested on the support page and checked the integrity of catroot2 as well as renaming it and regenerating the folder. None of these have been able to fix my problem.
For information, this is the message history when I try to connect:
[12/8/2014 8:55:49 AM] Ready to connect.
[12/8/2014 9:27:19 AM] Contacting vpn.[hostaddressremoved].com.
[12/8/2014 9:27:22 AM] Please enter your username and password.
[12/8/2014 9:27:29 AM] User credentials entered.
[12/8/2014 9:27:30 AM] Please respond to banner.
[12/8/2014 9:27:31 AM] User accepted banner.
[12/8/2014 9:27:31 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Checking for profile updates...
[12/8/2014 9:27:32 AM] Checking for product updates...
[12/8/2014 9:27:32 AM] Checking for customization updates...
[12/8/2014 9:27:32 AM] Performing any required updates...
[12/8/2014 9:27:32 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Establishing VPN - Initiating connection...
[12/8/2014 9:27:33 AM] Establishing VPN - Examining system...
[12/8/2014 9:27:33 AM] Establishing VPN - Activating VPN adapter...
[12/8/2014 9:27:33 AM] Establishing VPN - Attempting to repair VPN adapter...
[12/8/2014 9:27:33 AM] Disconnect in progress, please wait...
[12/8/2014 9:28:22 AM] Connection attempt has failed.
[12/8/2014 9:28:24 AM] Ready to connect.
I have tried every kind of search I can think of to find any other solutions to try, and I cannot find anything else. Does anyone have any other recommendations of what to try in order to be able to connect to my client?
-TheJayDude

Yes, I am sorry to say that several people have seen the same issue. It seems like the issue is specific to Yosemite and Anyconnect. My very technical staff and I have tried many things. The default route is missing and the file /var/run/resolv.conf is also missing which means that both the route and DNS server are messed up. We re-added the default route manually which allows us to ping the servers and even access them via the IP address
Run the command below before starting the VPN to get the default route
netstat -nr | grep default
Then run the following to re-add the default route.
route add default xxx.xxx.xxx.xxx
BUT there is no way that I can find to fix the DNS entry.
We tried re-adding the DNS entries in the /var/run/resolv.conf and then restarting the DNS service
$ sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
Password:
$ sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
BUT THIS DOES NOT WORK!
If anyone can help us solve the DNS issue, at least we have a work-around for our technical people until Cisco and/or Apple can resolve it.
Here is a link to the same issue at Cisco.
https://supportforums.cisco.com/discussion/12334071/cisco-anyconnect-secure-mobi lity-client-os-x-yosemite-vpn-not-working-if-mac

Anyconnect 3.1.0.1065 "the client agent has encountered an error"

Hi there.
I trying to resolve a problem with VPN connection. We use ASA 5540, anyconnect ver. 3.1.0.1065 which works fine for almost every workstations. But some of them after successful authentication crash with error attached below:
"the client agent has encountered an error"
Operation system is Win 7 64bit. Has anybody sow sth like that?
thanks.

Hi Ad,
Could you please disable any FW / AV and try?
How did you install 3.1? Did you upgrade it from a previous version?
What if you uninstall it and install it again?
What does the DART bundle reveal?
Thanks.
Portu.
Please rate any helpful posts

The SkillSoft Course Player has encountered an error while communicating wi

HI Friends ,
I am getting following error while launching a SCORM Course from Learner sel service :
Error ::
===
The SkillSoft Course Player has encountered an error while communicating with the Learning Management System. As a result, your session will now be closed.
=================================================================================================..
Please do let me know how we can resolve this issue ..
Thanks in advance ..
Regards
Vicky

Hi Lee ,
Thanks for your response .
1. yes the courses are scormn courses . I generated PIF files through installer.exe given by the vendor and imported to the LO.and then created offering and class. So when employee lanunches the course for learner self service i am getting this error
2.Even i have done borwser compabilty test.please the below output :
SkillSoft Browser Capabilities Check.
Your browser results have been saved to our server and can be accessed for the next 30 days using this URL.
http://browser.skillport.com/bh/results.asp?resultsid=%7BFE8831C3%2D74EA%2D475D%2DAF1D%2D8B4D70CE609B%7D
User Details.
Your e-mail [email protected]
IP Address 168.187.81.162
Approximate Connection Speed 68,109 kbps
Date and Time of Test 19 Apr 2011 02:08:59
Proxy Via 1.1 webwasher (Webwasher 6.8.7.9396), 1.1 j5k-tec-69 (jaguar/3.0-11)
Combined Technical Specifications (20110114) This test checks compatibility for a combined specification of SkillSoft Course Player, Simulation Player and SkillPort
Test Operating System
Result Pass
Your Computer Microsoft Windows XP
Test Browser Type
Result Pass
Your Computer Internet Explorer
Test Browser Version
Result Pass
Your Computer 7.0
Test Adobe Flash
Result Pass
Your Computer 10.0.22.87
Test Java Environment
Result Pass
Your Computer Sun Microsystems Inc.
Version 6.0 Update 18 (1.6.0_18)
Test PopUp Blocker
Result Pass
Your Computer No PopUp Blocker Detected.
Access a SkillSoft Support Representative in a one to one chat environment using our Live Help.
http://support.skillsoft.com/livehelp/browsertest.asp?resultsid=%7BFE8831C3%2D74EA%2D475D%2DAF1D%2D8B4D70CE609B%7D&customerid=%7B293C989F%2DAA78%2D4D7E%2DA66C%2D0E2BDC6CBC07%7D&[email protected]
The SkillSoft Online Customer Support Portal is a gateway to the latest technical support and how to information. Users can search technical support articles, view a list of FAQs or submit requests to SkillSoft Customer Service Representatives through an intuitive, easy to use Web form.
http://onlinesupport.skillsoft.com
..please do let me know how i can resolve this issue
Regards
Vicky

The Internal Concurrent Manager has encountered an error.

Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 06-JUN-2012 00:51:22 -
Shutting down Internal Concurrent Manager : 06-JUN-2012 00:51:22
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The PPD_0606@PPD internal concurrent manager has terminated with status 1 - giving up.
Edited by: sahil jain on Jun 6, 2012 10:10 PM

Hi;
1. What is EBS version?
2. Did you check:
Concurrent Managers Will Only Start on One Node in PCP/RAC Environment [ID 264296.1]
Concurrent Processing - The Concurrent Manager Fails to Start on GSM Enabled Due to DBMS_LOCK.Request ResultCall Failed to Establish ICM [ID 245563.1]
Regard
Helios

I'm getting the "spooler subsystem app has encountered and error" message

Greetings. I have one XP machine wired to a router, and one Win7 Laptop connected wirelessly. I install the printer driver for the Deskjet D2530 on the XP machine, and I can print. Then I install the printer driver for the Deskjet D2530 on the laptop, and go to "add Printer". I see the printer on the network, try add it, and the installation completes. Then when I attempt to print, the error message comes up on the XP machine.
The next step was to try the "hp print and scan tool'. I ran it on the XP machine and NFF; on the Win7 laptop, it said there was a driver conflict and that I should uninstall the printer driver software, and install the "full featured" version. I did that, and no difference.
Any help would be greatly appreciated. Thanks

Microsoft has a fix for this on XP operating systems:
http://support.microsoft.com/kb/810894
if that link does not work look for this phrase on the Microsoft site:
Spooler subsystem app has encountered a problem and needs to close
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

ITunes Match error: iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

I have just subscribed to iTunes Match, and get the above error message. I have signed out and signed in several times, and still get the same message. Can anyone help with a solution?

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

ITunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

Every few hours I receive this error message:
"iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
Is there someone who knows how this could be solved?
[Update]
I see that there is already a discussion on this issue: https://discussions.apple.com/thread/3502994?start=0&tstart=0
Message was edited by: mickniepoth

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

ITunes Match has encountered an error. Please choose Sign Out and then Sign In from the iTunes Store menu and try again.

this happens every week!!!
iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the iTunes Store menu and try again.

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

HT4914 When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

Premiere Pro has encountered an error - Mac 10.9.4

Hi,
I’ve just downloaded and installed (twice) premier pro (CC 2014) and am receiving this error message when I attempt to launch the program:
Premiere Pro has encountered an error.
[/ppro801/releases/2014.03/shared/adobe/MediaCore/ASL/Foundation/Src/DirectoryRegistry.cpp -283]
This happens both when I open the it from my Applications folder and when I try to open an existing project.
I’m on 3.5ghz Intel Core i7 iMac running on OS X 10.9.4
Anyone else getting this and found a way around it?
Thanks

next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Your installation has encountered an error. Installer failed to initialise

I have tried multiple times downloading CS6 master collection onto my mac all I need is tnhe trial version and everytime I have gone through the trouble shooting routine of turning my computer off exiting all applications but I really need help as I have a assignment I am working on basically everytime at the end of my installation I get the message Your installation has encountered an error. Installer failed to initalize. HELP???

OS X Lion
From the Apple menu choose System Preferences....
From the View menu choose Users & Groups.
Click the lock and authenticate as an administrator account.
Click Login Options....
Click the "Edit..." or "Join..." button at the bottom right.
Click the "Open Directory Utility..." button.
Click the lock in the Directory Utility window.
Enter an administrator account name and password, then click OK.
Choose Enable Root User from the Edit menu.
Enter the root password you wish to use in both the Password and Verify fields, then click OK.

Keep encountering "Error 56" when starting the VPN client

Hello all. I recently downloaded the VPN client to connect to my school's Unix servers. The first time I downloaded it, it worked just fine. But now for some reason, the service will not start at all. When I go to start>programs>Cisco Systems>VPN client, it seems to load, but after about a minute, I get this error message: "Error 56: The Cisco Systems, Inc., VPN client has not been started. Please start this service and try again." I've tried going to the Cisco folder and clicking on the .exe files, but they don't seem to do anything. Clicking on "cvpnd.exe" and "vpnclient.exe" don't bring up anything, and nothing appears in the task manager.
I'm using Vista. Any ideas what could be causing this?

I am not sure if people are still experiencing this issue but I came across it this morning on my Windows 7 64 Bit system.
I eventually figured out the problem...
1. Uninstall Cisco VPN Client
2. Go into device manager and remove ANY Cisco Virtual Adapters
3. Re-install
For what I could see the problem was caused by the cvpnd.exe (Cisco Service) process being unable to target a 'single' adapter.
Hope this helps anyone having this issue.

Is there a 64-bit version of the VPN Client for Vista coming?

Is there a 64-bit version of the VPN Client for Vista coming for the VPN 3000 series concentrators?

February 18, 2010
Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments.
A 64-bit specific compatible image is available for installation on these platforms.
Please have communicate feedback (both positive and problems) to [email protected]
Key Capabilities available for Beta Testing:
New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
Release Notes will be available next week via a link once the download image is selected.

Getting VPN from the VPN client to see into the host network

Hello
I am a real amateur here. I have configured a cisco VPN server, group and user on an SRP527W, ADSL2+ AnnexA, 802.11n ETSI, 2FXS/1FXO. I can connect from my PC with the Cicso VPN client on it (I get the banner) but I cannot ping into the local network at all. Once I do get in I will be using shares to work on files or VNC to take over a CAD workstation.
I am sure I just have not set up something but I don't know where to look. My local network is 192.168.15.***
Please put me right.
My setup is

Hello Christopher
It appears that the VPN client must be on a separate network to any VLAN: If I try an address range matching a local VLAN I get this:

[Anyconnect 3.0] "The VPN client driver has encountered an error"

Similar Messages

Maybe you are looking for