AnyConnect 3.0 with ASA5510 no Internal Access

We have gotten our anyconnect clients to connect to the VPN with no issues and verifying credentials with RADIUS. Remote users however cannot access internal resources through the VPN. I know I need to setup an NAT Exempt statement for my VPN Pool to the Internal Network, but I am having problems figuring that out and looking for a little guidance.
Thank you in advance.
-Nick

You have to create a access list.
e.g access-list NO-NAT extended permit object-group VPN-DHCP-POOL any ( feel free to restrict access here) log
Then create no NAT rule
e.g Nat (interface) 0 access-list NO-NAT
Sent from Cisco Technical Support iPad App

Similar Messages

Problem with traffic over Remote Access VPN (Cisco ASA5505)

Hi
I've changed the VPN IP pool on a previously functioning VPN setup on a Cisco ASA5505, I've updated IP addresses everywhere it seemed appropriate, but now the VPN is no longer working. I am testing with a Cisco IPSec client, but the same happens with the AnyConnect client. Clients connect, but cannot access resources on the LAN. Split tunneling also doesn't work, internet is not accessible once VPN is connected.
I found a NAT exempt rule to not be correctly specified, but after fixing this, the problem still persists.
: Saved:ASA Version 8.2(1) !hostname ciscoasadomain-name our-domain.comenable password xxxxxxxx encryptedpasswd xxxxxxxx encryptednamesname 172.17.1.0 remote-vpn!interface Vlan1 nameif inside security-level 100 ip address 10.1.1.2 255.0.0.0 !interface Vlan2 nameif outside security-level 0 pppoe client vpdn group adslrealm ip address pppoe setroute !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveclock timezone SAST 2dns domain-lookup insidedns domain-lookup outsidedns server-group DefaultDNS name-server 10.1.1.138 name-server 10.1.1.54 domain-name our-domain.comsame-security-traffic permit inter-interfacesame-security-traffic permit intra-interfaceobject-group network utobject-group protocol TCPUDP protocol-object udp protocol-object tcpaccess-list no_nat extended permit ip 10.0.0.0 255.0.0.0 remote-vpn 255.255.255.0 access-list split-tunnel standard permit 10.0.0.0 255.0.0.0 access-list outside_access_in extended permit tcp any interface outside eq https access-list outside_access_in extended permit tcp any interface outside eq 5061 access-list outside_access_in extended permit tcp any interface outside eq 51413 access-list outside_access_in extended permit udp any interface outside eq 51413 access-list outside_access_in extended permit tcp any interface outside eq 2121 access-list outside_access_in extended permit udp any interface outside eq 2121 access-list inside_access_out extended deny ip any 64.34.106.0 255.255.255.0 access-list inside_access_out extended deny ip any 69.25.20.0 255.255.255.0 access-list inside_access_out extended deny ip any 69.25.21.0 255.255.255.0 access-list inside_access_out extended deny ip any 72.5.76.0 255.255.255.0 access-list inside_access_out extended deny ip any 72.5.77.0 255.255.255.0 access-list inside_access_out extended deny ip any 216.52.0.0 255.255.0.0 access-list inside_access_out extended deny ip any 74.201.0.0 255.255.0.0 access-list inside_access_out extended deny ip any 64.94.0.0 255.255.0.0 access-list inside_access_out extended deny ip any 69.25.0.0 255.255.0.0 access-list inside_access_out extended deny tcp any any eq 12975 access-list inside_access_out extended deny tcp any any eq 32976 access-list inside_access_out extended deny tcp any any eq 17771 access-list inside_access_out extended deny udp any any eq 17771 access-list inside_access_out extended permit ip any any pager lines 24logging enablelogging asdm informationalmtu inside 1500mtu outside 1500ip local pool VPNPool 172.17.1.1-172.17.1.254icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 0 access-list no_natnat (inside) 1 10.0.0.0 255.0.0.0static (inside,outside) tcp interface 5061 10.1.1.157 5061 netmask 255.255.255.255 static (inside,outside) tcp interface https 10.1.1.157 4443 netmask 255.255.255.255 static (inside,outside) tcp interface 51413 10.1.1.25 51413 netmask 255.255.255.255 static (inside,outside) udp interface 51413 10.1.1.25 51413 netmask 255.255.255.255 static (inside,outside) tcp interface 2121 10.1.1.25 2121 netmask 255.255.255.255 static (inside,outside) udp interface 2121 10.1.1.25 2121 netmask 255.255.255.255 access-group outside_access_in in interface outsidetimeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00dynamic-access-policy-record DfltAccessPolicyaaa-server AD protocol ldapaaa-server AD (inside) host 10.1.1.138 ldap-base-dn dc=our-domain,dc=com ldap-scope subtree ldap-naming-attribute sAMAccountName ldap-login-password * ldap-login-dn cn=ciscoasa,cn=Users,dc=ourdomain,dc=com server-type auto-detectaaa authentication ssh console AD LOCALaaa authentication telnet console LOCAL http server enable 4343http 0.0.0.0 0.0.0.0 outsidehttp 10.0.0.0 255.0.0.0 insidehttp remote-vpn 255.255.255.0 insidesnmp-server host inside 10.1.1.190 community oursnmpsnmp-server host inside 10.1.1.44 community oursnmpno snmp-server locationno snmp-server contactsnmp-server community *****snmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set FirstSet esp-3des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5crypto dynamic-map dyn1 1 set transform-set FirstSetcrypto dynamic-map dyn1 1 set reverse-routecrypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAPcrypto map mymap 1 ipsec-isakmp dynamic dyn1crypto map mymap interface outsidecrypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa crl configurecrypto ca trustpoint CA1 revocation-check crl none enrollment retry period 5 enrollment terminal fqdn ciscoasa.our-domain.com subject-name CN=ciscoasa.our-domain.com, OU=Department, O=Company, C=US, St=New York, L=New York keypair ciscoasa.key crl configurecrypto ca certificate chain ASDM_TrustPoint0 certificate xxxxxxx ... quitcrypto ca certificate chain CA1 certificate xxxxxxxxxxxxxx ... quit certificate ca xxxxxxxxxxxxx ... quitcrypto isakmp enable outsidecrypto isakmp policy 1 authentication rsa-sig encryption 3des hash md5 group 2 lifetime 86400crypto isakmp policy 5 authentication pre-share encryption 3des hash sha group 2 lifetime 86400crypto isakmp policy 10 authentication pre-share encryption des hash sha group 2 lifetime 86400ssh 10.0.0.0 255.0.0.0 insidessh timeout 5console timeout 0vpdn group adslrealm request dialout pppoevpdn group adslrealm localname username6@adslrealmvpdn group adslrealm ppp authentication papvpdn username username6@adslrealm password ********* store-localvpdn username username@adsl-u password ********* store-localvpdn username username2@adslrealm password ********* dhcpd auto_config outside!threat-detection basic-threatthreat-detection scanning-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptntp server x.x.x.x source outsidessl trust-point ASDM_TrustPoint0 outsidewebvpn port 4343 enable outside svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1 svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3 svc enablegroup-policy defaultgroup internalgroup-policy defaultgroup attributes dns-server value 10.1.1.138 10.1.1.54 split-tunnel-policy tunnelspecified split-tunnel-network-list value split-tunnel default-domain value our-domain.comgroup-policy DfltGrpPolicy attributes dns-server value 10.1.1.138 10.1.1.54 vpn-tunnel-protocol IPSec l2tp-ipsec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value split-tunnel address-pools value VPNPool webvpn svc ask none default svcusername person1 password xxxxxxx encryptedusername admin password xxxxxxxx encrypted privilege 15username person2 password xxxxxxxxx encryptedusername person3 password xxxxxxxxxx encryptedtunnel-group DefaultRAGroup general-attributes address-pool VPNPool default-group-policy defaultgrouptunnel-group DefaultRAGroup ipsec-attributes trust-point CA1tunnel-group OurCompany type remote-accesstunnel-group OurCompany general-attributes address-pool VPNPooltunnel-group OurCompany webvpn-attributes group-alias OurCompany enable group-url https://x.x.x.x/OurCompany enabletunnel-group OurIPSEC type remote-accesstunnel-group OurIPSEC general-attributes address-pool VPNPool default-group-policy defaultgrouptunnel-group OurIPSEC ipsec-attributes pre-shared-key * trust-point CA1!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns preset_dns_map parameters message-length maximum 512policy-map type inspect sip sip-map parameters max-forwards-validation action drop log state-checking action drop log rtp-conformance policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect netbios inspect tftp inspect icmp inspect pptp inspect sip sip-map ! service-policy global_policy globalprompt hostname context Cryptochecksum:xxxxxxxxxxxxxxxxx: end
I've checked all the debug logs I could think of and tried various troubleshooting steps. Any ideas?
Regards
Lionel

Hi
The bulk of the devices are not even routing through the ASA, internal devices such as IP phones, printers, etc. There is also large wastage of IP addresses which needs to be sorted out at some stage.
Outside IP address is 196.215.40.160. The DSL modem is configured as an LLC bridge.
Here are the debug logs when connecting if this helps at all. Nothing is logged when a connection is attempted though.
Regards
Lionel
Oct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 765Oct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing SA payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing ke payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing ISA_KE payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing nonce payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing ID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received Fragmentation VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, IKE Peer included IKE fragmentation capability flags: Main Mode: True Aggressive Mode: FalseOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received NAT-Traversal RFC VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received NAT-Traversal ver 03 VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received NAT-Traversal ver 02 VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received xauth V6 VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received Cisco Unity client VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received DPD VIDOct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, Connection landed on tunnel_group OurIPSECOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing IKE SA payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, IKE SA Proposal # 1, Transform # 5 acceptable Matches global IKE entry # 2Oct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing ISAKMP SA payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing ke payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing nonce payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Generating keys for Responder...Oct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing ID payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing hash payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Computing hash for ISAKMPOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing Cisco Unity VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing xauth V6 VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing dpd vid payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing NAT-Traversal VID ver 02 payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing NAT-Discovery payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, computing NAT Discovery hashOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing NAT-Discovery payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, computing NAT Discovery hashOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing Fragmentation VID + extended capabilities payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Send Altiga/Cisco VPN3000/Cisco ASA GW VIDOct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 436Oct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + HASH (8) + NAT-D (130) + NAT-D (130) + NOTIFY (11) + NONE (0) total length : 128Oct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing hash payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Computing hash for ISAKMPOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing NAT-Discovery payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, computing NAT Discovery hashOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing NAT-Discovery payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, computing NAT Discovery hashOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing notify payloadOct 15 17:08:51 [IKEv1]: Group = OurIPSEC, IP = 197.79.9.227, Automatic NAT Detection Status: Remote end IS behind a NAT device This end IS behind a NAT deviceOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing blank hash payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing qm hash payloadOct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=b8b02705) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 72Oct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=b8b02705) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 88Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, process_attr(): Enter!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Processing MODE_CFG Reply attributes.Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: primary DNS = 10.1.1.138Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: secondary DNS = 10.1.1.54Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: primary WINS = clearedOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: secondary WINS = clearedOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: split tunneling list = split-tunnelOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: default domain = our-domain.comOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: IP Compression = disabledOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: Split Tunneling Policy = Split NetworkOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: Browser Proxy Setting = no-modifyOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: Browser Proxy Bypass Local = disableOct 15 17:09:02 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, User (person2) authenticated.Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing blank hash payloadOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing qm hash payloadOct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=a2171c19) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64Oct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=a2171c19) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, process_attr(): Enter!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Processing cfg ACK attributesOct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=3257625f) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 164Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, process_attr(): Enter!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Processing cfg Request attributesOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for IPV4 address!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for IPV4 net mask!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for DNS server address!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for WINS server address!Oct 15 17:09:02 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Received unsupported transaction mode attribute: 5Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Application Version!Oct 15 17:09:02 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Client Type: iPhone OS Client Application Version: 7.0.2Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Banner!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Default Domain Name!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Split DNS!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Split Tunnel List!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Local LAN Include!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for PFS setting!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Save PW setting!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for FWTYPE!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for backup ip-sec peer list!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Client Browser Proxy Setting!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Obtained IP addr (172.17.1.1) prior to initiating Mode Cfg (XAuth enabled)Oct 15 17:09:02 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Assigned private IP address 172.17.1.1 to remote userOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing blank hash payloadOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, construct_cfg_set: default domain = our-domain.comOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Send Client Browser Proxy Attributes!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Browser Proxy set to No-Modify. Browser Proxy data will NOT be included in the mode-cfg replyOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing qm hash payloadOct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=3257625f) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 210Oct 15 17:09:03 [IKEv1 DECODE]: IP = 197.79.9.227, IKE Responder starting QM: msg id = c9359d2eOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progressOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Resume Quick Mode processing, Cert/Trans Exch/RM DSID completedOct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, PHASE 1 COMPLETEDOct 15 17:09:03 [IKEv1]: IP = 197.79.9.227, Keep-alive type for this connection: DPDOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Starting P1 rekey timer: 3420 seconds.Oct 15 17:09:03 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=c9359d2e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NONE (0) total length : 284Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing hash payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing SA payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing nonce payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing ID payloadOct 15 17:09:03 [IKEv1 DECODE]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, ID_IPV4_ADDR ID received172.17.1.1Oct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Received remote Proxy Host data in ID Payload: Address 172.17.1.1, Protocol 0, Port 0Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing ID payloadOct 15 17:09:03 [IKEv1 DECODE]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, ID_IPV4_ADDR_SUBNET ID received--10.0.0.0--255.0.0.0Oct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Received local IP Proxy Subnet data in ID Payload: Address 10.0.0.0, Mask 255.0.0.0, Protocol 0, Port 0Oct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, QM IsRekeyed old sa not found by addrOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Selecting only UDP-Encapsulated-Tunnel and UDP-Encapsulated-Transport modes defined by NAT-TraversalOct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE Remote Peer configured for crypto map: dyn1Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing IPSec SA payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IPSec SA Proposal # 1, Transform # 6 acceptable Matches global IPSec SA entry # 1Oct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE: requesting SPI!IPSEC: New embryonic SA created @ 0xCB809F40, SCB: 0xC9613DB0, Direction: inbound SPI : 0x96A6C295 Session ID: 0x0001D000 VPIF num : 0x00000002 Tunnel type: ra Protocol : esp Lifetime : 240 secondsOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE got SPI from key engine: SPI = 0x96a6c295Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, oakley constucting quick modeOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing blank hash payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing IPSec SA payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing IPSec nonce payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing proxy IDOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Transmitting Proxy Id: Remote host: 172.17.1.1 Protocol 0 Port 0 Local subnet: 10.0.0.0 mask 255.0.0.0 Protocol 0 Port 0Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing qm hash payloadOct 15 17:09:03 [IKEv1 DECODE]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE Responder sending 2nd QM pkt: msg id = c9359d2eOct 15 17:09:03 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=c9359d2e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NONE (0) total length : 152Oct 15 17:09:06 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=c9359d2e) with payloads : HDR + HASH (8) + NONE (0) total length : 52Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing hash payloadOct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, loading all IPSEC SAsOct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Generating Quick Mode Key!Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, NP encrypt rule look up for crypto map dyn1 1 matching ACL Unknown: returned cs_id=c9f22e78; rule=00000000Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Generating Quick Mode Key!Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, NP encrypt rule look up for crypto map dyn1 1 matching ACL Unknown: returned cs_id=c9f22e78; rule=00000000Oct 15 17:09:06 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Security negotiation complete for User (person2) Responder, Inbound SPI = 0x96a6c295, Outbound SPI = 0x09e97594IPSEC: New embryonic SA created @ 0xCB8F7418, SCB: 0xC9F6DD30, Direction: outbound SPI : 0x09E97594 Session ID: 0x0001D000 VPIF num : 0x00000002 Tunnel type: ra Protocol : esp Lifetime : 240 secondsIPSEC: Completed host OBSA update, SPI 0x09E97594IPSEC: Creating outbound VPN context, SPI 0x09E97594 Flags: 0x00000025 SA : 0xCB8F7418 SPI : 0x09E97594 MTU : 1492 bytes VCID : 0x00000000 Peer : 0x00000000 SCB : 0x99890723 Channel: 0xC6691360IPSEC: Completed outbound VPN context, SPI 0x09E97594 VPN handle: 0x001E7FCCIPSEC: New outbound encrypt rule, SPI 0x09E97594 Src addr: 10.0.0.0 Src mask: 255.0.0.0 Dst addr: 172.17.1.1 Dst mask: 255.255.255.255 Src ports Upper: 0 Lower: 0 Op : ignore Dst ports Upper: 0 Lower: 0 Op : ignore Protocol: 0 Use protocol: false SPI: 0x00000000 Use SPI: falseIPSEC: Completed outbound encrypt rule, SPI 0x09E97594 Rule ID: 0xCB5483E8IPSEC: New outbound permit rule, SPI 0x09E97594 Src addr: 196.215.40.160 Src mask: 255.255.255.255 Dst addr: 197.79.9.227 Dst mask: 255.255.255.255 Src ports Upper: 4500 Lower: 4500 Op : equal Dst ports Upper: 41593 Lower: 41593 Op : equal Protocol: 17 Use protocol: true SPI: 0x00000000 Use SPI: falseIPSEC: Completed outbound permit rule, SPI 0x09E97594 Rule ID: 0xC9242228Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE got a KEY_ADD msg for SA: SPI = 0x09e97594IPSEC: Completed host IBSA update, SPI 0x96A6C295IPSEC: Creating inbound VPN context, SPI 0x96A6C295 Flags: 0x00000026 SA : 0xCB809F40 SPI : 0x96A6C295 MTU : 0 bytes VCID : 0x00000000 Peer : 0x001E7FCC SCB : 0x985C5DA5 Channel: 0xC6691360IPSEC: Completed inbound VPN context, SPI 0x96A6C295 VPN handle: 0x0020190CIPSEC: Updating outbound VPN context 0x001E7FCC, SPI 0x09E97594 Flags: 0x00000025 SA : 0xCB8F7418 SPI : 0x09E97594 MTU : 1492 bytes VCID : 0x00000000 Peer : 0x0020190C SCB : 0x99890723 Channel: 0xC6691360IPSEC: Completed outbound VPN context, SPI 0x09E97594 VPN handle: 0x001E7FCCIPSEC: Completed outbound inner rule, SPI 0x09E97594 Rule ID: 0xCB5483E8IPSEC: Completed outbound outer SPD rule, SPI 0x09E97594 Rule ID: 0xC9242228IPSEC: New inbound tunnel flow rule, SPI 0x96A6C295 Src addr: 172.17.1.1 Src mask: 255.255.255.255 Dst addr: 10.0.0.0 Dst mask: 255.0.0.0 Src ports Upper: 0 Lower: 0 Op : ignore Dst ports Upper: 0 Lower: 0 Op : ignore Protocol: 0 Use protocol: false SPI: 0x00000000 Use SPI: falseIPSEC: Completed inbound tunnel flow rule, SPI 0x96A6C295 Rule ID: 0xCB7CFCC8IPSEC: New inbound decrypt rule, SPI 0x96A6C295 Src addr: 197.79.9.227 Src mask: 255.255.255.255 Dst addr: 196.215.40.160 Dst mask: 255.255.255.255 Src ports Upper: 41593 Lower: 41593 Op : equal Dst ports Upper: 4500 Lower: 4500 Op : equal Protocol: 17 Use protocol: true SPI: 0x00000000 Use SPI: falseIPSEC: Completed inbound decrypt rule, SPI 0x96A6C295 Rule ID: 0xCB9BF828IPSEC: New inbound permit rule, SPI 0x96A6C295 Src addr: 197.79.9.227 Src mask: 255.255.255.255 Dst addr: 196.215.40.160 Dst mask: 255.255.255.255 Src ports Upper: 41593 Lower: 41593 Op : equal Dst ports Upper: 4500 Lower: 4500 Op : equal Protocol: 17 Use protocol: true SPI: 0x00000000 Use SPI: falseIPSEC: Completed inbound permit rule, SPI 0x96A6C295 Rule ID: 0xCBA7C740Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Pitcher: received KEY_UPDATE, spi 0x96a6c295Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Starting P2 rekey timer: 3417 seconds.Oct 15 17:09:06 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Adding static route for client address: 172.17.1.1 Oct 15 17:09:06 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, PHASE 2 COMPLETED (msgid=c9359d2e)

Problem with Collaboration and Portal accessed via multiple URLs

Here is the scenario. We have the portal installed that can be accessed from an external domain: portal.company.com. We recently upgraded to WCI 10gR3 and in the process we added an internal server that uses an OAM webgate which handles Integrated Windows Authentication. The URL for out internal access is portal.company.int. The problem comes when we try to access collaboration folders. From our internal URL when we click on a folder in Collab Documents the loading... text come sup and that's it. No other activity in the browser or in PTSpy. If we use the external URL there is no issue.
Anyone have any ideas on how we can get around this or what the cause could be?

try to play with the collaboration server url (for the Collaboration Remote Server )
http://yourserver.com:11930/collab/
Enter the external url here, or better the name of the machine, something like
http://<machinename><yourdomain>:11930/collab/
See if works.
Hope that helps!
Val

Cisco ISE Vs Cisco Anyconnect Posture module with Advanced Endpoint Protection

We are planning to use cisco Anyconnect posture module with Adv Endpoint protection to examine the VPN users- This can check whether they a antivirus/anti spyware software installed on their work station and can force to update def file if its older than specified number of days, it can also check the firewall status on their workstation and enable if its not already.This can detect keylogger and emulation softwares also.
Do we get any additional advantages in using ISE compared to Anyconnect posture module ......
Siddhartha

These are good questions. We had them last year before we decided to purchase ISE, specifically for our VPN users.
I will be watching this thread to see what kind of responses you get.
As of right now, I can verify the ISE can indeed check if specific Anti-Virus is installed (i.e., your corporate AntiVirus), or if ANY (supported by Cisco within ISE) antivirus is installed, and it can force an update process for the AV if it detects that the DAT files are older than a admin specified amount of time.
Our issue at the moment (if you haven't searched the forums) is ISE detected the proper WSUS updates are indeed installed on the users systems and allowing the users system to talk to our internal WSUS server.
We are now wondering if the Advanced Endpoint licensing on the ASA would have been a better way to go.
Wishing you luck in finding your answers for us all.
Dirk

HT2529 This morning Voice Over started running on my computer, but when I go to SYSTEM PREFERENCES/INTERNATIONAL ACCESS the Voice Over option is off, so I turned it on and then off, but it's still on. What else can I do to make it stop?

This morning Voice Over started running on my computer when I turned it on. I did not turn Voice Over. Could I have hit a combination of keys on the keyboard that accidentally turned it on? When I went to System Preferences and chose Internation Access it showed that Voice Over was not even on. I turned it on and turned it off to reset it, and it is still running. How is this possible, and how to I get rid of it?
Trumpeter

I went to System Preferences, Universal Access, and then VoiceOver for the fiftieth time after you said to check VoiceOver Utility to see if I saw anything odd. On The VoiceOver screen it was actually saying that VoiceOver was on. All day the VoiceOver option was off, and the computer talked to me everytime I logged in. I tried turning it on and off and it still talked to me. Now the VoiceOver option was on, so I turned it off again. Weird! I had tried several combinations of keys again and again as the tech instructed me to do, but we couldn't turn it off, but I have to admit that after my phone went dead I tried everything I could imagine; so maybe in trying to turn the talking off I turned the VoiceOver Option on. Anyway, somewhere along the way it quite talking to me.
Let me ask you a couple of questions. When I clicked on VoiceOver Utility, after turning VoiceOver off, the screen message says: Speak the following greeting after login: Welcome to Mac OSX. VoiceOver is running. I was assuming that it meant VoiceOver was running. That is what it is saying right now. It's not talking to me anymore, but the screen says this whether the VoiceOver icon is on or off. What is this all about. Is it telling me that Voice Over is still running when I see this, or what? After all, even when the OFF icon was chosen the computer still spoke to me when I hit each key upon logging in. After you read the rest of this you will understand why I am asking if it is still running even though it's not talking to me.
There is a box that appears and says "Portable Preferences for (Jane Doe) have been detected on (JaneDoe). Would you like to use them? Always Use / No / Yes What does that mean?
Last but not least. I was looking around and was clicking on Application, Documents, etc. When I clicked on Documents, only four things came up even though there are tons of documents on my computer. All four of them have to do with VoiceOver, and they were labeled as documents. One of the documents had this in it:
SCRConfiguration Cursor Tracking KBToVO
SCRConfiguration Cursor Tracking VOToTXT
SCRConfiguration Cursor Tracking VOToKB
I'm not a computer genius, so maybe I just don't know what I'm looking at. Is it normal for something like this to be found under documents? All of these were dated today, and the problems started today. I haven't gone to bed yet, so even though it's after midnight it's still the same day to me. Anyway, none of the documents were dated before this problem started. On top of that, I have tons of documents on my computer, but when I clicked on Documents, those four are the only ones that showed up. After trying to decipher the programming language on them, I went to click on Applications and hit Documents again, and all the documents came up. I scanned the list and didn't see them, but there are so many documents on here that I haven't had time to slowly go over them to see if I missed those four documents somehow. Since then I haven't been able to get just those four to appear by themselves again.
Now, is it possible that I still have a hacker and he knows through a key logger everything I am communicating to you and the Apple Store, Maybe he did made a mistake and accidentally caused this problem, and through logging every key I have typed he has learned about his mistake and fixed it. He could still be key logging me now without me knowing it; or maybe he removed the keylogger, because he know I'm taking it in to the Apple Store and can tell them now exactly what to look for.
It is either a hacker, or I have a very vivid imagination. What do you think?

Blocking international access

just read an interesting article in the ny times which spoke
about how worldwide spam volumes have doubled... and that spam
accounts for more than 9 of 10 email messages sent.
since a good chunk of the junk comes from outside the country
- and presumably a good chunk of the programs that scour websites
looking for email addresses are out of the country - it seems like
it would be a good idea to block international access to a site
(assuming, obviously, that one doesn't care about the quality
viewers that will be lost in the process) and also block receipt of
incoming email that originated outside the country.
possible?

You'd better go take a nap. That's way too many paragraphs
for you
today.... 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"crash" <[email protected]> wrote in message
news:[email protected]...
> Saying it's a reasonable request and saying it's a
reasonable expectation
> are two different things. I would not do it, based
mostly on the reasons
> stated.
>
> No matter how many people might be able to see my
webpage, if I sell local
> products to a local market (say, energy), then the
global market is of no
> concern to me. Yes, I can reach them, but what does it
matter?
>
> If there is a circumstance in which the spam is causing
an overload of my
> servers to provide service to my local customers, and I
sell energy to a
> tri-state area, it may behoove me to limit my site to
only those that I
> serve.
>
> Just because my page is globally accessible doesn't mean
that's the best
> business model to uphold. Similarly, I don't code my
pages in anything
> but English because I don't have the facilities to work
with anybody that
> doesn't speak English. While they might be technically
able to buy my
> product, It's not feasible for me to sell it to them.
>
> Since very little was specified about the site, I did
not find it an
> unreasonable request. I do not agree on the OP's methods
arriving at
> this - articles don't tell you what your traffic is,
only general
> patterns.
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> You still think it's reasonable?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "crash" <[email protected]> wrote in
message
>> news:[email protected]...
>>> heheh, sorry, reader wasn't showing the 800
other replies to this, and I
>>> wasn't lookign at time of posts.
>>>
>>> :O)
>>>
>>>
>>
>>
>
>

Exchange 2013 OWA - Restrict External access to OWA, while keeping internal access open

I'm looking for the best way to restrict users who can access OWA externally, while keeping internal access to OWA open to everyone. We would preferably like to control who has external access to OWA with an AD group. Users who have external access,
would need both external and internal access to OWA. Internal users would only have internal access to OWA.
TMG is off the table since it is EOL. Reverse proxy might be a possibility, but I'm running into issues with the security setup and passing credentials.
Does anyone know the best way of restricting external access without disabling internal access?
Thanks

Not sure if this still applies to 2013 or not, haven't tried yet...
http://blog.leederbyshire.com/2013/03/13/block-or-allow-selected-users-depending-on-location-and-ad-group-membership-in-microsoft-exchange-2010-outlook-web-app/
Blog |
Get Your Exchange Powershell Tip of the Day from here

When i login with microsoft account cannot access with administrative share c$

i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1
but when i login with local account can access
and some people tell me create key in regedit t fix it
after enter user name and password show this error
and i apply your instruction and not fix until now
note:
my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2
but if i login with local user can i access all machine hidden share network windows 7 and 8.1

yes this computer i want to access name poland2-work and have two users
first :administrator
second : poland 2

Problem with Exporter for MS Access 3.2 in SQL Developer

Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?

Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas.

How can i delete an icloud account with out password or access to old email

how can i delete an icloud account with out password or access to old email

If the old ID ("email address) is yours, and is an ealier version of your current iCloud ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Error message display for PO creation with reference to internal orders

Sir,
While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message when Budget is exceeded.
But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
Regards,
Srinivasa Murthy

Hi Anupam,
The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
This error comes during PO creation Process and PO can not be saved. This error message display is correct.
Item 001 Order 600643 budget exceeded
Message no. BP604
Diagnosis
In document item 001 Order 600643, budget for fiscal year 2009 was exceeded by 99,960,000.00 INR.
But my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
Regards,
Srinivasa Murthy

HT1948 Can I install OS X on a usb drive connected to an imac with a dead internal hard drive?

Can I install OS X on a usb drive connected to an imac with a dead internal hard drive?

Yes.
(72108)

PM order creation with refrence to internal order

Hi all
I want to create PM order with the refernce of Internal Order.PM order should also have the same number as that of Internal order. Please guide how it is to be done.
Regards
Anil

Anil,
Internal order and Maintenance order are of two different order category. I dont think you will be able to create maintenance order with ref to internal order.
DP

The server responded with an error. Access to "Don Weist/Winhall" in "Work" in account "iCloud" is not permitted. The server responded: "403" to operation CalDAVWriteEntityQueueableOperation.

"The server responded with an error.
Access to “Don Weist/Winhall” in “Work” in account “iCloud” is not permitted. The server responded: “403” to operation CalDAVWriteEntityQueueableOperation."
Does anyone know how to repair this problem. It just began happening today.
Thanks,
Ken

We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud. The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
Always backup your calendar before troubleshooting (File > Export > iCal Archive).
The following steps are roughly from a Apple Support Community discussion.
Open iCloud in System Preferences.
Switch off (uncheck) iCal sync in iCloud System Preferences pane.
Backup iCal before doing this. You will need to remove calendar data.
Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync!

Major Issues with installing 4tb internal. Really need advice please

In the process of a long needed upgrade to my 2010 Mac Pro Quad core 2.8 and have run into a serious headache that I really need advice on so I can get back to work. I've already spent 2 days dealing with all of this...
Just did a new SSD install and Migration which went fine but I'm also updating the rest of the internal drives. My main (non boot) drive was being upgraded from a Seagate Barracuda 3tb to a 4th Deskstar NAS (it was showing as compatible with my desktop, see links below). My 3tb ran fine for years but now due to it being heavily used I want to switch to a new drive and I can also use a bit more space.
The issue I'm running into is that initially on boot, my system was telling me it couldn't recognize the disk and it wasn't even showing up in Disk Utility. I had to purchase a SATA USB 3 kit to attach it as an external to get it to show which worked without problem. With the USB kit I was then able to partition it (GUID, Mac OS extended journaled) and format it properly. After reinserting the drive into my tower as an internal it failed to show again. After a few attempts of restarts and trying various bays it popped up but showed as a non formatted drive and I was told again that the system didn't recognise it. I was then given the option to initialise and was then actually able to then format and partition it though Disk Utility while it was installed as an internal.
Figured that was problem solved but when I went to check the drive and getting ready to transfer files over I noticed that Disk Utility was only allowing the First Aid and Partition options but not Erase, RAID, Restore which I'd never seen before. I then also noticed that none of the drive connection info was in the same format nor will it even provide drive bay info, connection info or read/write status (See screen shots). This is what I can't figure out and really need to clarify before I put full trust into using this drive.
Any info would be greatly appreciated...
Deskstar 4tb internal info which is installed in Bay 2
3tb Seagate which I trying to retire and transfer from.
Here are the weblinks to the Deskstar 4tb drive and the compatibility list but I support isn't allowing me to add direct links so add the www. before hand.
(Drive - eshop.macsales.com/item/HGST/0S03664/) (compatibility list - eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macpromid2010.html).

What OSX version?
Disk Utility in later versions of ML and I think Mavericks have problems formatting with 4 TB internal drives.
http://forums.macrumors.com/showthread.php?t=1661024
http://apple.stackexchange.com/questions/112266/why-doesnt-my-mac-pro-see-my-new -4tb-sata-drive

AnyConnect 3.0 with ASA5510 no Internal Access

Similar Messages

Maybe you are looking for