AnyConnect 3.1 with SBL stucks after establishing connection on Win7
Hi,
the title nearly says it all. I am currently trying to get my AnyConnect with SBL working. I installed the AnyConnect Client at version 3.1.05160 pre-deploy, plus the matching VPNgina module to enable the Start Before Logon feature. Operating System is Windows 7.
Connecting to the VPN-Server out of the logged in Windows works fine. However, when connecting before logging in, something goes wrong. After clicking on the VPN connection button in the bottom right corner, the AnyConnect login popup shows up and I can enter the credentials. Then the vpn tunnel is established (!) and the popup closes, but the Windows screen stucks at "Connecting, please wait". I have to press the cancel button to close the screen and get back to the Windows login screen, where I can, surprisingly, log in to my company network, because the VPN tunnel is established. After i log in a little popup in the bottom right corner verifies that, as well as the VPN client itself when I look at it.
This effect only occurs on Windows 7 platforms, but on every single platform i tested it on. I also tested it on a Windows 8.1 PC, using the same client, settings and profile, where everything works fine.
Does someone have an idea how this problem can be explained? Any help would be highly appreciated!
Greeting
Marcel
Hi Portu,
I've just tried, the connection works but the warning keeps coming.
- CN=abc.example.com
- DNS - abc.example.com resolves to ASA_IP
- CN matches the DNS
- Certificate was installed on client PC
Where does the Anyconnect search/check for the certs?
Thanks.
Similar Messages
-
GX520 hangs after establishing server connection
We are running ZFD 6.5 sp2 and trying to image new GX520's
There are 21 machines all exactley the same down to every last BIOS line,
DELL GX520.
I used the bootcd.iso from SP2
Set up a policy to install an image to any PC booting within a given IP
range.
Here is the issue:
I installed the boot loader on all twenty PC's
7 PC's took the image just fine
14 hung with no error after establishing server connection and the path
to the image.
Zimglog.xlm shows
- <WS DN="R3NWTS01.R3.usnrc">
<Tree>NRC_TREE</Tree>
<Status>Failure</Status>
<ErrorMessage>Workstation failed to restore image as the base image
already exists.</ErrorMessage>
<Operation>Download</Operation>
<ImageType>Base Image</ImageType>
<ImagePath>\\R3NWTS01\NRC\zen-img\train2.zmg</ImagePath>
<Timestamp>Tue Apr 11 12:13:08 2006</Timestamp>
When I try a manual download I get "no eligible partitions to recieve
Image"
Any thoughts?
Thanks
Thomas Magee
US NRC
Network Manager
[email protected]Tmm3,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Reconnecting to channel set after lost connection
Hi there,
I am beginner to flex and I have a problem with to login after the connection to the BlaseDS has been lost.
Setup:
The flex client calls a HelloWorld Java service exposed using spring-flex. This service is called when the user hit the Hello World button on the UI. The channel set on which this service is exposed is secured and for now we will resort to programmatic authentication. (The user does is not required to input his username and password, just to simplify it a bit).
As a client framework Cairngrom is used and an appriopriate delegate is setup to handle the remote object call.
Here is a snippet from the HelloWorld delegate class called after the user hits the Hello World button.
public function getHelloWorldMessage():void{
if(!__service.channelSet.authenticated){
var token:AsyncToken = __service.channelSet.login("username", "password");
token.addResponder(new AsyncResponder(
function(event:ResultEvent, token:Object = null):void {
Alert.show("You are logged in", "Login");
// Send the amf request to the backend.
var token2:AsyncToken = __service.getHelloWorld();
// Add the responder.
token2.addResponder(__responder);
function(event:FaultEvent, token:Object = null):void {
Alert.show("You are NOT logged in", "Login");
}else{
// Send the http request.
var token2:AsyncToken = __service.getHelloWorld();
// Add the responder.
token2.addResponder(__responder);
The __service is the Hello World service has been defined as follows.
<mx:RemoteObject id="helloWorldServiceRemoteObject" destination="helloWorldService" channelSet="{helloWorldChannels}"/>
<mx:ChannelSet id="helloWorldChannels" >
<mx:AMFChannel uri="http://localhost:8080/helloworldservice-war-1.0.0.SNAPSHOT/messagebroker/amf/" />
</mx:ChannelSet>
What happens:
User clicks on the Helloworld, the program hits the getHelloWorldMessage and the ChannelSet.login("username", "password") is called. The channelset authentication flag is set to true, and the _authAgent present in the ChannelSet class which was previously null is set
The success handler is called and the secured spring function returns the "Hello World" message.
I restart the BlaseDS server to simulate an intermittent connection.
Now the user clicks on Hello World button again and recieves an error since the authentication flag is still set to true there is no attempt to login again.
The following FaultEvent is caught
faultCode=Client.Authentication
faultString=An Authentication object was not found in the SecurityContext
The user reclicks the Hello World button this time however the ChannelSet.authenticated is set to false and the client code attempts to reconnect however fails. The snippet below is an extract from the ChannelSet.as, when the user reclicks, the second condition is met and the IllegalOperationException with error message "ChannelSet is in the process of logging in or logging out." is thrown. The condition is met since the _authAgent is not null.
public function login(username:String, password:String, charset:String=null):AsyncToken
if (authenticated)
throw new IllegalOperationError("ChannelSet is already authenticated.");
if ((_authAgent != null) && (_authAgent.state != AuthenticationAgent.LOGGED_OUT_STATE))
throw new IllegalOperationError("ChannelSet is in the process of logging in or logging out.");
if (charset != Base64Encoder.CHARSET_UTF_8);
charset = null; // Use legacy charset, ISO-Latin-1.
Does someone have any ideas as to how to resolve this?
Regards,
Markbump! Anyone knows how to solve this?
-
Hiya!
This issue has been answered numerous times for Office 2010 and Office 2007, but I have yet to any solutions or Hotfixes that work for Office 2013 (x64) on Win7.
How to replicate the issue:
Open a file from a network share.
Edit file.
Leave computer on with file open. Computer goes to sleep or into stand-by mode.
Wait a bit
Wake up computer
CPU opens file in Read-Only mode and gives you the following error "Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes."
What I've tried:
http://support.microsoft.com/kb/2434898 - Office 2007 registry fixes. Does not apply.
http://support.microsoft.com/kb/2413659 - Office 2010 problem. This exact issue. Says 'No microsoft products that match this hotfix are installed'
Work Around:
I can saving new versions of these files overrides this issue, but this is sometimes not possible for end-users who only have specific access to ONE SPECIFIC FILE in a particular network share.
Please let me know how I can alleviate this issue!
Thanks
-ChrisHi,
Are those problematic documents created via previous versions of Office?
Please also try to run a repair of your Office 2013 installtion and check if it helps. See:
http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
Regards,
Steve Fan
TechNet Community Support -
My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?
i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated
-
Since my iPhone 4S was stuck on the connect to iTunes screen after updating to iOS 7, I followed these instructions and restored. But nothing changed! I still have the same picture of a plug with arrow to iTunes.
It is restored now. Thanks for the comment about disabling firewalls - we did that and tried again and it worked.
-
ACS loses connection with AD occasionally after upgrade from 5.2 to 5.3.0.40
ACS had been integrated with Active Directory before ACS upgrade to 5.3. After the ACS 5.3 upgrade users aren’t able to login to AAA devices occasionally. Error message is:
{AuthenticationResult=Error; Type=Authentication; Authen-Reply-Status=Error; }
24429 Could not establish connection with Active Directory
At the same time, when this issue occurs, ACS connection to AD works fine (checked with Users and Identity Stores> External Identity Stores > Active Directory “Test Connection”)I had the same problem, I opened a Cisco TAC case and my issue was resolved.
Sent: Tuesday, 14 August 2012 9:58 AM
Subject: RE: 622739355 HelpDesk#SVR328332-2 : Troubleshoot Cisco ACS 1121 v5.3 With Windows Active Directory
Hi Ramraj,
Thanks for the link to the article, but from what I’ve seen in the logs I’m not sure that we’ve got the same root cause to the issue.
From the ACSADAgent.log files I can see log messages like:
Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG network.state NST: SniffList: postfailsort=mykulad11p.cssc.dksh.net
Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.kerberos.adhelpers Encryption (id 1) is not supported by KDC. Try next in the list
Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.osutil Module=Kerberos : KDC refused skey: KDC has no support for encryption type (reference base/adhelpers.cpp:216 rc: -1765328370)
Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.adagent Unable to refresh computer credentials: KDC refused skey: KDC has no support for encryption type
This lines up with the error message that we see in the TACACS+ Authentication logs:
24493 ACS has problems communicating with Active Directory using its machine credentials.
I have come across a NETBIOS limitation (it’s not an ACS bug, but a bug has been filed for tracking and documentation purposes) that prevents two ACSs from being connected to Active Directory at the same time if the first 15 characters of their hostnames are the same. The bug ID is CSCtj62342 and its externally visible details are available here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj62342
The hostname of the primary ACS is : MYMY-TPM-DC-ACS-1
The hostname of the secondary ACS is: MYMY-TPM-DC-ACS-2
From the hostnames, we can see that the first 16 characters of the hostnames are the same. What this means is that once the primary is connected to AD, after some time passes (this will depend on when the secondary goes an talks to AD) the secondary will lose its connection to AD and any authentications hitting the secondary will fail with the same error: 24493 ACS has problems communicating with Active Directory using its machine credentials.
To resolve this issue, the hostnames of the ACSs will need to be changed so that the first 15 characters of their respective hostnames are not the same. Please keep in mind that this is a NETBIOS limitation and not a software bug. -
Problem with Java Script after upgrade from BW 3.5 to BI7
Dear Colleagues,
We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
We compared the Java code with other environment that was not upgraded - it's perfectly the same.
The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
Thanks in advance for any suggestions,
Andrzej BobulaHi Deepu,
Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
<b>3.5</b>
if (navigator.appName == "Microsoft Internet Explorer")
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
name="Content">
and
<b>7.0</b>
if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
name="Content" 0nLoad="javascript:loadTitle()">
(I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
Regards,
Vitaliy -
Using Automator to open a program with a delay after a programmed restart
Hi to all! With my old PowerPc I used to start unattended sessions of my Newsreader (Unison) overnight simply putting Unison in my Login elements window, and programming a restart at a fixed hour. Unfortunately, with my very fast new iMac this doesn't work: Unison opens too fast after the programmed restart, before a network connection has been established, and Unison is unable to see the NewsServer online when it starts (error "nodelist not found", typical of a not yet established Internet connection). Note that I downgrade to Unison 1.8.x to do this, as the Unison 2.x program cannot be closed with a session running to resume it after start: it simply defaults to "Pause transfers" after quitting, and need a clic on "Resume" after reopening.
Obviously, what I need is to introduce a "wait (say) 2 minutes before the opening of Unison", or anything that can check the Internet connection before Unison starts. May anyone instruct me to do this with Automator and/or AppleScript?
In fact, I tried to generate a workflow in Automator, with a Pause after the start of the process, then the instruction to open Unison. I put the saved workflow in my Login elements, but it didn't work on my iMac 27, i7Core, Snow Leopard installed. I added an "execute workflow" at beginning of the process, but the Pause command gives always an error and the process stops before Unison' opening.
Any suggestion or help in writing an Automator or AppleScript workflow/script to be put among the startup items?
Thanks a lot!I am trying to use Automator to restart an application. I figured how to quit the application, however when I relaunch it, it asks for password permission... how can I use automator to enter the password? or is there a way to launch the software with password in a script?
-
I was attempting to update my iPhone 4 to the new iOS 7.0.4 via my computer after I plugged it in to create a backup copy and something went wrong before it could finish and I recieved an error message. Now my phone is stuck on the "Connect to iTunes screen". I've tried everything to reset & restore my phone with no luck!
I have:
-Restarted my computer
-Updated iTunes to most current version
-Turned phone on and off several times, waiting up to a half hour before turning on (to be greeted directly with apple logo then the connect to iTunes screen)
-Turned on, turned on and held home button (nothing happens)
-My computer is NOT recognizing my device at ALL! But when I plugged my boyfriends iPhone in, it detected it no problem.
I tried calling my phone from the other phone and it goes straight to voicemail. I am super frustrated! Does anybody know what is going on?I was able to restore my phone!!!
I called Apple and they said there was nothing more I could do. I called my carrier Verizon and was able to get my computer to recognize my device after trying this-
Solution:
After trying EVERYTHING this is the ONLY thing that worked-
I took the USB connector cable out of the USB port it was in, and tried another one on the otherside of my laptop and iTunes was able to discover my phone in recovery mode. My phone was reset and everything is fine ( thank gosh for backup copies!) -
After I updated firefox to 6.0 today firefox has developed a problem loading multiple tabs. When I try to load 10+ tabs, either at the same time or by opening each tab separately, each tab is stuck trying to connect to the desired page. This continues if I close all the tabs and try to load a single page, the single page is unable to get pass connecting. In order to load a new page when this situation arises I must close down firefox and start again, and the program has no history of the previous session.
Other solutions
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_other-solutions
Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their databases before doing a scan.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Windows Defender Home Page -
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
* Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
* Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
* SWI Forums - http://www.spywareinfoforum.com/
Check and tell if its working. -
Problem in establishing connection with mysql 5.0
Hi,
I am using JCAPS 5.1. I tried to insert data to mysql database table.
But i got following error
java.sql.SQLException: Error in allocating a connection. Cause:
Physical Connection doesn't exist.
My intention is to read file in which data are comma seperated and to
populate those values to a mysql 5.0 database table.
Sample DATA in file [test.txt]
111,gg,23,MFG
112,hh,24,MFG
113,ii,25,RETAIL
114,jj,26,IT
Database table: employee
eno,ename,eage,edept
While creating JDBC OTD there is no problem in establishing connection with database. But after deploying i got above error.
I have used Mysql 5.0 Connector/J JDBC driver. Added JDBC driver jar files to following directories as required.
1) C:\JavaCAPS51\logicalhost\is\lib
2)C:\JavaCAPS51\logicalhost\is\domains\test\lib
Steps i have followed as per JDBC-ODBC -eway user guide doc.
1) Created USerDefined OTD and added necessary fields
2) Created JDBC OTD.
3) Created JAVA collaboration and do business process for inserting
4) Mapped all components by creating in Connectivity MAp
5) created necessary external systems in envrionment explorer.[JDBC External System and File External System]
6)Created Deployment profile
5) Deployed it.
After deploying it gives error as
java.sql.SQLException: Error in allocating a connection. Cause: Physical Connection doesn't exist
Please let me know the solution for problem.
Message was edited by:
VenkateshSampoornamIn the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb -
Dear All,
I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
technet in order to find solution.
ISSUE/PROBLEM:
At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.?
REGARDS DANISH DANIEDear Paul,
I am able to open the URL (http://psdb/ReportServer )using
domian credential and page open with these contents
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
Second,
Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
file also done the registry settings to disable the loop back settings.
Same error still ! .... what should i do now ???
REGARDS DANISH DANIE -
iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
I don't have Apple Care, what to do? Spend more money and buy a new phone?Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
I myself, two days ago purchased a 2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
SHAME ON YOU! -
Process got stuck after receiving SIGUSR1
Hi,
I have a C++ program which get stuck after receiving SIGUSR1 signal. Its a daemon process which stop after receiving SIGUSR1 signal. but instead of stopping it stuck.
below is the pstack of the process when it was stuck.
----------------- lwp# 1 / thread# 1 --------------------
7fa1f48c lwp_sema_wait (7e340)
7fa996dc _park (7e340, 7fabc000, 0, 7e278, 2316c, 0) + 114
7fa993a4 _swtch (7e278, 7e278, 7fabc000, 5, 1000, 7fabc000) + 424
7fa9ada0 mutexadaptive_lock (7fac785c, 4c00, 1000, fffeffff, 1, 4d58) + 160
7fa9aab4 cmutexlock (7e188, 7fabc000, 0, 33d8c, 0, 0) + 84
00033d8c __1cDstdNbasic_ostream4Ccn0ALchar_traits4Cc___Gsentry2t5B6Mr1_v_ (ffbe9254, 7ce30, 7d278, 7c24c, 8, 7e180) + 50
00031768 __1cDstd2l6Frn0ANbasic_ostream4Ccn0ALchar_traits4Cc____pkc_2_ (7ce30, 66f4d, 7c24c, 0, 0, 0) + 20
00023844 __1cSReplicatorDriver64Jterminate6Fi_v_ (10, 0, 0, 0, 0, 0) + 1c
00023674 __1cSReplicatorDriver64ScatchSignalHandler6Fi_v_ (10, ffbe97f0, ffbe9538, 0, 0, 0) + 1c
7faab118 __sighndlr (10, ffbe97f0, ffbe9538, 23658, 7e320, 7e310) + c
7faa811c sigacthandler (10, 7e278, 0, 0, 0, 7fabc000) + 708
--- called from signal handler with signal 16 (SIGUSR1) ---
7fa1fa6c _write (7e180, 7e940, ffffffff, 280, 2, 7e000) + c
0005a6a0 __1cDstdNbasic_filebuf4Ccn0ALchar_traits4Cc___Esync6M_i_ (7e180, 8, 7d278, 8, 218, 7ce30) + 30
00031d30 __1cDstd2l6Frn0ANbasic_ostream4Ccn0ALchar_traits4Cc____pkc_2_ (7ce30, 300, 7c24c, 2fd10, 0, 1) + 5e8
0002a548 __1cXTimesTenTableReplicatorEread6MrknXTimesTenLogConnection64_ripppnRttXlaUpdateDesc_t__b_ (803f0, 80430, ffbeaa30
, ffbeaa2c, 2fd10, 8) + 68
00029f98 __1cXTimesTenTableReplicatorJreplicate6Mrl_b_ (803f0, ffbeaaf0, 3e8, 5, 7fb4b4e8, 34) + 108
00028408 __1cYReplicatorThreadDriver64Drun6M_b_ (0, 3fc7c, 8, 7d278, 7ce38, 7e180) + c8
000232c4 __1cSReplicatorDriver64Drun6M_b_ (ffbeabd8, 23258, 7c24c, 2fd10, 0, 1) + 14
00023174 main (3, ffbeac44, ffbeac54, 7c800, 0, 0) + 124
00023028 _start (0, 0, 0, 0, 0, 0) + 108
below is the code of signal handler.
void ReplicatorDriver64::catchSignalHandler(int i_signalNumber)
if (i_signalNumber == SIGUSR1 )
ReplicatorDriver64::terminate(i_signalNumber);
cout<<"return from ReplicatorDriver64::terminate"<<endl;
return;
void ReplicatorDriver64::terminate(int i_signalNumber)
cout << "Received a User Signal 1( terminate ) "<<endl;
struct sigaction act, oact;
sigfillset(&act.sa_mask); // set all the signal flags in the sigmask argument
act.sa_handler = SIG_DFL; // set defaul action flag to segnal
act.sa_flags = 0;
m_processStatus = false;
}The C and C++ standards say that the only thing you can rely on doing in a signal handler is to read and write global volatile variables, abort the program, or call the signal function.
The Unix standard, which applies to Solaris, is more lenient. By default, a signal handler is run on the process stack, although it is possible to specify that a given signal runs on a different stack. If the stack actually used has enough space, you can call functions.
But the Unix standard limits the system functions that you can call. You can call only those system functions that the man page says they reentrant and safe to call from a signal handler. Any function that calls malloc or free is generally not safe, and I/O routines often involve calls to malloc or free.
Maybe you are looking for
-
How to print PDF report by clicking a button
Hi, I'm using oracle 10g developer suite. i've developed a form clicking a button calling a PDF report. But i do not want to show PDF report. i want to auto print PDF report by clicking a button. Plz help me.
-
RFBIBL00 Performance issues Post ECC6
Hi Folks, Have just completed ECC6 upgrade am seeing terrible performance issues when using RFBIBL00 for loading. All loads seem to stick reading table TBIZU. DB Is oracle and table is quite small. Stats are valid and when checking explain plan in or
-
When to expect July's sales reports?
We're August 1st and I'm wondering when will the sales reports be available? Now that we have daily download statistics, I hope to see how well I did for the month of July!
-
ive tried putting it in dfu mode and restoring it from their and i need help :/
-
Got virus in internet explorer,(window 7) I can't hook into any wireless connections. I figured that if I have Firefox then I can connect to a wireless hot spot.