AnyConnect client 3.1 installation error

Some of my VPN users are getting the following error on Windows 7 64 bit computer. I have uploaded the client to a website. The VPN users are supposed to download and install the client from the web-site. Then they enter the URL to connect to our VPN. This worked fine during the test and only some users are having issues. This seems like Windows issue. Any ideas? Did anyone experience this?
Error
“There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personal or package vendor”
Client- anyconnect-win-3.1.02026-web-deploy-k9.exe

I was able to resolve this issue.
This was the error in Windows events-
Event ID: 11722 Product:
Cisco AnyConnect Secure Mobility Client -- Error 1722.
There is a problem with this Windows Installer package.
A program run as part of the setup did not finish as expected.
Contact your support personnel or package vendor.
Action kdf_acsock64_Install, location:
C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\VACon64.exe, command: kdf -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\\" acsock
ISSUE
Virus damaged the Windows Firewall and Firewall service wasn’t running. When AnyConnect tried to register itself with the Firewall, it failed as the Firewall was damaged.
RESOLUTION
We decided to reimage the computer rather than fixing the issue. Reason- the Virus might have caused other damages that we were not able to detect.

Similar Messages

AnyConnect Client v3.1 driver error on windows 7

Hello,
I used AnyConnect Client v3.0 on my windows 7 machine and worked well. But after automatic upgrade to v3.1 by the VPN server(ASA) and it does not work any more. It seems that VPN authentication is successful but activation of VPN adapter fails.
I see two error messages below:
The VPN client driver has encountered an error. Please restart your computer or device, then try again.
AnyConnect was not able to establish a connection to the specified secure gateway. Please try connecting again.
Message History:
[30/08/2013 6:03:14 PM] Ready to connect.
[30/08/2013 6:04:20 PM] Contacting vpn.example.com.
[30/08/2013 6:04:25 PM] User credentials entered.
[30/08/2013 6:04:26 PM] Establishing VPN session...
[30/08/2013 6:04:26 PM] Checking for profile updates...
[30/08/2013 6:04:26 PM] Checking for product updates...
[30/08/2013 6:04:26 PM] Checking for customization updates...
[30/08/2013 6:04:26 PM] Performing any required updates...
[30/08/2013 6:04:32 PM] Establishing VPN session...
[30/08/2013 6:04:32 PM] Establishing VPN - Initiating connection...
[30/08/2013 6:04:33 PM] Establishing VPN - Examining system...
[30/08/2013 6:04:33 PM] Establishing VPN - Activating VPN adapter...
[30/08/2013 6:05:13 PM] Establishing VPN - Repairing VPN adapter...
[30/08/2013 6:06:00 PM] Disconnect in progress, please wait...
[30/08/2013 6:11:53 PM] Connection attempt has failed.
[30/08/2013 6:11:54 PM] Ready to connect.
I already did most of suggestions below from google but still the issue has not been resolved.
- Rebooted the laptop
- Confirm ICS disabled
- Remove Anyconnect client from the laptop and reinstall
- http://www.lehigh.edu/~inlts/comp/docs/vpn/cisco-drvr.html
Cheers
Jeong

I am also facing the exact same issue. I even tried with the newer version. But it does not work. During connection, it asks for accepting the banner and the suddenly the cisco adapter driver gets uninstalled from device manager and cisco pops-up the error screen.
" the VPN client driver encountered an error. Please restart your computer or device and try again"
Please help.

AnyConnect client no assigned address error

I am trying to set up the AnyConnect client (v2.4.0196) and when it tries to connect it fails with a no assigned address error. I look in the logs of the ASA and see a No IPv6 address available for SVC connection. IPv6 is disabled on the ASA.
Does anyone know how to prevent the AnyConnect client from trying to get an IPv6 address?
Thanks in advance...

Note that 2.4 is still beta, 2.3.2016 is the latest supported release today.
Having said that, I rather suspect an ASA issue than a client issue. Can you confirm whether or not an ipv4 address is assigned?
I.e. is there something in the logs like:
Oct 13 2009 09:05:55: %ASA-6-737026: IPAA: Client assigned 192.168.0.1 from local pool
Oct 13 2009 09:05:55: %ASA-6-737006: IPAA: Local pool request succeeded for tunnel-group 'DefaultWEBVPNGroup'
(note these are level 6 messages)

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

Anyconnect client installer

Anyone have an issue with the anyconnect client installer that after the install it does make a successful connection but the anyconnect installer window says it failed? Is this a bug?

Well if it works, it must have installed adequately, error messages notwithstanding.
There are a couple of installer bugs documented. I've not run into nay of them personally.
What version and client OS are you installing?

AnyConnect Secure Mobility Client v3.1.04066 "The VPN client driver encountered an error"

Hello, I am a software engineer and have been trying to connect to my client's VPN using the AnyConnect Secure Mobility Client (version 3.1.04066) and keep receiving the error "The VPN client driver encountered an error. Please try again or restart your system."
I am on a Windows 7 system with an intel i7-2670QM cpu. My computer model is an HP Pavilion dv7.
I have tried uninstalling the software, re-installing it. I've tried restarting my system multiple times through the process. I've checked the registry and made sure the name was setup correctly. I have checked and made sure that the correct services are not enabled. I have also tried what was suggested on the support page and checked the integrity of catroot2 as well as renaming it and regenerating the folder. None of these have been able to fix my problem.
For information, this is the message history when I try to connect:
[12/8/2014 8:55:49 AM] Ready to connect.
[12/8/2014 9:27:19 AM] Contacting vpn.[hostaddressremoved].com.
[12/8/2014 9:27:22 AM] Please enter your username and password.
[12/8/2014 9:27:29 AM] User credentials entered.
[12/8/2014 9:27:30 AM] Please respond to banner.
[12/8/2014 9:27:31 AM] User accepted banner.
[12/8/2014 9:27:31 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Checking for profile updates...
[12/8/2014 9:27:32 AM] Checking for product updates...
[12/8/2014 9:27:32 AM] Checking for customization updates...
[12/8/2014 9:27:32 AM] Performing any required updates...
[12/8/2014 9:27:32 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Establishing VPN - Initiating connection...
[12/8/2014 9:27:33 AM] Establishing VPN - Examining system...
[12/8/2014 9:27:33 AM] Establishing VPN - Activating VPN adapter...
[12/8/2014 9:27:33 AM] Establishing VPN - Attempting to repair VPN adapter...
[12/8/2014 9:27:33 AM] Disconnect in progress, please wait...
[12/8/2014 9:28:22 AM] Connection attempt has failed.
[12/8/2014 9:28:24 AM] Ready to connect.
I have tried every kind of search I can think of to find any other solutions to try, and I cannot find anything else. Does anyone have any other recommendations of what to try in order to be able to connect to my client?
-TheJayDude

Yes, I am sorry to say that several people have seen the same issue. It seems like the issue is specific to Yosemite and Anyconnect. My very technical staff and I have tried many things. The default route is missing and the file /var/run/resolv.conf is also missing which means that both the route and DNS server are messed up. We re-added the default route manually which allows us to ping the servers and even access them via the IP address
Run the command below before starting the VPN to get the default route
netstat -nr | grep default
Then run the following to re-add the default route.
route add default xxx.xxx.xxx.xxx
BUT there is no way that I can find to fix the DNS entry.
We tried re-adding the DNS entries in the /var/run/resolv.conf and then restarting the DNS service
$ sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
Password:
$ sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
BUT THIS DOES NOT WORK!
If anyone can help us solve the DNS issue, at least we have a work-around for our technical people until Cisco and/or Apple can resolve it.
Here is a link to the same issue at Cisco.
https://supportforums.cisco.com/discussion/12334071/cisco-anyconnect-secure-mobi lity-client-os-x-yosemite-vpn-not-working-if-mac

Installation error of SAP Business One Client after server disconnection

Hello,
While installing the SAP Business One Client to my laptop, the SAP server network connection accidentally interrupted and my installation breaks off. I did cancel the setup and try to remove the SAP Business One DI API using uninstaller. After removing the corrupted application I tried to run again the setup.exe from the server but I got this error:
Previous version of SAP Business One DI API uninstallation failed:
sapserver\B1_SHR\Client\SAP DIAPI Installation\setup.exe
SAP Business One Client installation will be aborted.
I also tried to remove the registry files using some registry cleaner but still I got the error.
Encountered something like this before? Need some help, thanks in advance!
Regards,
Ren

Hi All,
Sorry to re open this thread, but I am having a similar issue in attempting to upgrade a 2007 installation to 8.81.
When attempting the upgrade Server Tools, SDK, and even Client wont uninstall from either the upgrade process or manually from control panel.
I have conducted all the mentioned solutions as well as running registry cleaner all to no effect.
I have even attempted re installing the 2007 application but this returns a 1612 install shield error.
Any advice would be higher appreciated.
Matthew

SCCM 2012 Client Installation Errors & Solutions

Hello,
Can we figure out all SCCM 2012 Client installation errors and solutions ?
Cheer's Up
Best Regard's Krishna

Hi,
Error codes are easiest looked up in CMtrace, making one general list of errors and solutions is hard, in many scenarios there are different solutions to an error based on the infrastructure and differences between environments
Error lookup in cmtrace.
http://blogs.technet.com/b/configmgrdogs/archive/2012/06/07/trace32-exe-cmtrace-exe-hidden-features.aspx
Here is a blog on troubleshooting client installations issues, it is for sccm 2007 but a lot of the content is still valid.
http://blogs.technet.com/b/sudheesn/archive/2010/05/31/troubleshooting-sccm-part-i-client-push-installation.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM Client Installation Error and compmgr service issues

Hi dudes,
Hope you all are good. I am getting stuck in SCCM client installation. I have SCCM 2007 R3 setup. It's working perfect but recently getting errors in
sccm client installation after facing some viruses issues in my environment.
I search on that error but nothing found any relevant information related
to the below error. I tried to manually installing the client but getting the error ccmsetup.exe is not a valid 32 bit application :(. Also while trying to start the configmgr service manager in tool box it gives the below snapshot error. Any help relevant
to the below error very meaningful for me.
Regards,
Mohsin

Hi Jason,
Thank You for your response. Yes i tried it to manually start the service on client machine but it give the below error,
For component service manager, yes we are going forward to the restoration process using VM restore(as sccm is deployed on a VM and we take the full vm backup).
Regards,
Mohsin

Error 751011 - Mac OSX anyconnect client

Hi all,
I'm running into the following error when I use a Mac OSX anyconnect client when I try to connect. Our Windows 7 anyconnect clients login just fine.
3
Oct 25 2013
16:19:54
751011
Local:x.x.x.x:4500 Remote:y.y.y.y:34573 Username:Unknown Failed user authentication. Error: General Failure
%ASA-3-751011: Local: localIP:port Remote:remoteIP:port Username:
username/group Failed user authentication. Error: error
A failure occured during user authentication within EAP for an IKE        version 2 remote access connection.
• localIP:port—The local IP address and        port number
• remoteIP:port—The remote IP address        and port number
• username/group—The username or group        associated with this connection attempt
• error—The error string that indicates        the specific error
Any ideas of what could be causing this? We are using certifcate and LDAP for AAA.
Thanks in Advance.
Bill

Hi Harry,
I have resolved the issue. I didn't realize that I had to have the Mac Anyconnect pkg file copied to the flash of the ASA. Once I did that the authentication issue went away.
Bill

Windows 8.1 Preview not working with AnyConnect Client

I had Windows 8 and was running Cisco AnyConnect client 3.0.10055 perfectly.
I upgraded to the Windows 8.1 preview and it tries to download update and then it fails and disconnects with the following message:
An unknown termination error occurred in the client.
Tried uninstalling and reinstalling the client, no luck.
Any ideas?
Thanks,
Eric

I had the same issue with windows 8.1 x64. I believe there is an issue with the windows 8.1 update process where it fails to update some of the drivers properly. I have noticed this issue with other windows drivers after the update. Follow the steps below and you VPN should work again.
1. Uninstall Cisco Anyconnect client.
2. Go to Device Manager and Disable Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64
3. Go to C:\Windows\System32 and rename vpnva64.sys to vpnva64_Old.sys.
4. Reinstall Cisco Anyconnect client.
5. Go to Device Manager, you see duplicated Cisco AnyConnect VPN Virtual Adapters. Uninstall one of them but do not check the option to remove the driver.
6. Apply the registry fix in this blog: http://www.tomontech.com/2012/03/pro-tip-cisco-anyconnect-vpn-client-and-windows-8-consumer-preview/
7. Try to connect again and your Cisco VPN should work.

ECC v6.0 installation error : CJS-30022 and FCO-00011

Hi All,
I enconter the while installing ECC 6.0 in windows 2003 server and MSSQL 2005 as the database. The error occurs during import ABAP phase ( exactly the Job name was SAPSDIC and this is the first job out of 19)
The same issue has been discussed in this forum but for oracle( Please find the link below for it)Kindly let me know how to fix it and since the database i am using it is SQL 2005 i am really confused on what should i change exactly.
Re: Solution Manager v4.0 installation error : CJS-30022 and FCO-00011
regards,
Anandha Krishnan.R

Sunil,
The log file is pasted.
===== Log file of import.monitor.log =============
TRACE: 2007-04-18 18:45:15 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -ctf I "E:\SAP ERP 2005 IDES\51032413_4_IDES SAP ERP 2005 SR2 Inst. Export\EXP4\DATA\SAPSDIC.STR" "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-04-18 18:45:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-04-18 19:00:34 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-04-18 19:01:00
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-04-18 19:01:00
1 error(s) during processing of packages.
INFO: 2007-04-18 19:01:00
Import Monitor is stopped.
===== Log file of import.monitor.java.log =============
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
===== Log file of SAPSDIC.TSK =============
T F4TMP C ok
P F4TMP~0 C ok
D F4TMP I ok
T F4UHLP C ok
P F4UHLP~0 C ok
D F4UHLP I err
Note : Other than the last task all the other tasks were found to be ok
===== Log file of SAPSDIC.log =============
(DB) INFO: ENHA_TMDIR~CMP created
(DB) INFO: ENHA_TMDIR~ENH created
(DB) INFO: ENHA_TMDIR~MTD created
(DB) INFO: F4TMP created
(DB) INFO: F4TMP~0 created
(IMP) INFO: import of F4TMP completed (1404 rows) #20070418185312
(DB) INFO: F4UHLP created
(DB) INFO: F4UHLP~0 created
(CNV) WARNING: code page conversion problem
Number of substitutions: 5
(row 3322 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 22 04 3e 04 47 04 3a 04 38 04 20 00 20 00 20 00 |".>.G.:.8. . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 9
(row 3323 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 23 04 41 04 3a 04 3e 04 40 04 35 04 3d 04 38 04 |#.A.:.>[email protected].=.8.|
VALUE 35 04 20 00 20 00 20 00 20 00 20 00 20 00 20 00 |5. . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 4
(row 3324 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 26 04 38 04 3a 04 3b 04 20 00 20 00 20 00 20 00 |&.8.:.;. . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 7
(row 3325 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 27 04 30 04 41 04 42 04 3e 04 42 04 30 04 20 00 |'.0.A.B.>.B.0. .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 13
(row 3326 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 15 04 3c 04 |-.;.5.:.B.@...<.|
VALUE 3a 04 3e 04 41 04 42 04 4c 04 20 00 20 00 20 00 |:.>.A.B.L. . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 19
(row 3327 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 21 04 3e 04 |-.;.5.:.B.@.!.>.|
VALUE 3f 04 40 04 3e 04 42 04 38 04 32 04 3b 04 35 04 |?.@.>.B.8.2.;.5.|
VALUE 3d 04 38 04 35 04 20 00 20 00 20 00 20 00 20 00 |=.8.5. . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 18
(row 3328 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 38 04 47 04 |-.;.5.:[email protected].|
VALUE 1d 04 30 04 3f 04 40 04 4f 04 36 04 35 04 3d 04 |[email protected].=.|
VALUE 38 04 35 04 20 00 20 00 20 00 20 00 20 00 20 00 |8.5. . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 16
(row 3329 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 38 04 47 04 |-.;.5.:[email protected].|
VALUE 35 04 41 04 3a 04 38 04 39 04 20 00 42 04 3e 04 |5.A.:.8.9. .B.>.|
VALUE 3a 04 20 00 20 00 20 00 20 00 20 00 20 00 20 00 |:. . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 7
(row 3330 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3d 04 35 04 40 04 33 04 38 04 4f 04 20 00 |[email protected]. .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created
(DB) INFO: GCTAB created
(DB) INFO: GCTAB~0 created
(IMP) INFO: import of GCTAB completed (0 rows) #20070418185312
(DB) INFO: GUI_FKEY created
(DB) INFO: GUI_FKEY~0 created
(IMP) INFO: import of GUI_FKEY completed (335 rows) #20070418185312
(DB) INFO: VRSX4~1 created
(DB) INFO: disconnected from DB
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20070418190034
regards,
Anandha Krishnan.R

Installation error 0xc1440137 0x2000c

Hi-
Trying to upgrade an Acer Switch 10 tablet to Windows 8.1 pro.
The following installation error pops up. installation error 0xc1440137 0x2000c
Here is part of the setuplog file, but no error file is created. Any ideas?
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer in progress: BinaryPath=[C:\windows\system32\migration\dafmigplugin.dll], CLSID=[{C939EC0F-2F56-4CE8-AF56-2336596A5FA7}],
ApartmentThreadingModel=[0].
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID=[0x1434], Server=[C:\windows\system32\migration\dafmigplugin.dll], CLSID=[{C939EC0F-2F56-4CE8-AF56-2336596A5FA7}],
ApartmentThreadingModel=[0]
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Loaded server(C:\windows\system32\migration\dafmigplugin.dll)
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Successfully loaded and registered server(C:\windows\system32\migration\dafmigplugin.dll)
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() succeeded.
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer finished: Result=[0x0].
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer in progress: BinaryPath=[C:\windows\system32\migration\IphlpsvcMigPlugin.dll], CLSID=[{ADE10465-2A43-454E-B0A7-3F220A61BD03}],
ApartmentThreadingModel=[0].
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID=[0xd68], Server=[C:\windows\system32\migration\IphlpsvcMigPlugin.dll], CLSID=[{ADE10465-2A43-454E-B0A7-3F220A61BD03}],
ApartmentThreadingModel=[0]
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Loaded server(C:\windows\system32\migration\IphlpsvcMigPlugin.dll)
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Successfully loaded and registered server(C:\windows\system32\migration\IphlpsvcMigPlugin.dll)
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() succeeded.
2014-08-02 05:15:16, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer finished: Result=[0x0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer in progress: BinaryPath=[C:\windows\system32\migration\IphlpsvcMigPlugin.dll], CLSID=[{ADE10465-2A43-454E-B0A7-3F220A61BD03}],
ApartmentThreadingModel=[0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID=[0xecc], Server=[C:\windows\system32\migration\IphlpsvcMigPlugin.dll], CLSID=[{ADE10465-2A43-454E-B0A7-3F220A61BD03}],
ApartmentThreadingModel=[0]
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Loaded server(C:\windows\system32\migration\IphlpsvcMigPlugin.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Successfully loaded and registered server(C:\windows\system32\migration\IphlpsvcMigPlugin.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() succeeded.
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer finished: Result=[0x0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer in progress: BinaryPath=[C:\windows\system32\migration\WSMigPlugin.dll], CLSID=[{D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}],
ApartmentThreadingModel=[0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID=[0xfa8], Server=[C:\windows\system32\migration\WSMigPlugin.dll], CLSID=[{D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}],
ApartmentThreadingModel=[0]
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Loaded server(C:\windows\system32\migration\WSMigPlugin.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Successfully loaded and registered server(C:\windows\system32\migration\WSMigPlugin.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() succeeded.
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer finished: Result=[0x0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer in progress: BinaryPath=[C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll],
CLSID=[{43CCF250-2A74-48C6-9620-FC312EC475D6}], ApartmentThreadingModel=[0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID=[0x6c8], Server=[C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll],
CLSID=[{43CCF250-2A74-48C6-9620-FC312EC475D6}], ApartmentThreadingModel=[0]
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Loaded server(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Successfully loaded and registered server(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() succeeded.
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer finished: Result=[0x0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer in progress: BinaryPath=[C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll],
CLSID=[{43CCF250-2A74-48C6-9620-FC312EC475D6}], ApartmentThreadingModel=[0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID=[0x554], Server=[C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll],
CLSID=[{43CCF250-2A74-48C6-9620-FC312EC475D6}], ApartmentThreadingModel=[0]
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Loaded server(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Successfully loaded and registered server(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() succeeded.
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer finished: Result=[0x0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer in progress: BinaryPath=[C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-WICAMigrationPlugin\WicaMig.dll],
CLSID=[{DA94E4F3-53DC-4A74-9075-58B9415C35F7}], ApartmentThreadingModel=[0].
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID=[0xdb8], Server=[C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-WICAMigrationPlugin\WicaMig.dll],
CLSID=[{DA94E4F3-53DC-4A74-9075-58B9415C35F7}], ApartmentThreadingModel=[0]
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Loaded server(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-WICAMigrationPlugin\WicaMig.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: Successfully loaded and registered server(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-WICAMigrationPlugin\WicaMig.dll)
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() succeeded.
2014-08-02 05:15:17, Info MIG MigHost: CMigPluginSurrogate::LoadDllServer finished: Result=[0x0].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xe24].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1584].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x14ec].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x14a4].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x14b8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x14e4].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xef0].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1330].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xc38].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xc70].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x14c8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x14e8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1480].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xffc].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1588].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x3c4].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x7c4].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x13c8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x16c8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x5c8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xecc].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x7a4].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x13dc].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x6c8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xd68].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1158].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1398].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xdb8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x17d4].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xfa8].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1154].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0xe78].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x554].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x8cc].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1370].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1214].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x388].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1620].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1018].
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: Exiting ThreadID=[0x1434].
2014-08-02 05:15:20, Info MIG MigHost: Exiting process.
2014-08-02 05:15:20, Info MIG MigHost: CMigPluginSurrogate::Init: Successfully initialized surrogate.
2014-08-02 05:15:20, Info MIG MigHost: Initialized successfully with CLSID[{2262B37E-225C-4519-AE7E-B00C3DBEE707}] and LogDir=[]

Hi,
Please make sure that your computer is up to date in Windows update.
Also try following commands to repair Windows first:
Please make sure to run CMD as Administrator:
dism /online /cleanup-image /restorehealth
Then clear store temp file and make sure your network connection is stable (the wired connection should be better):
Run -> WSRESET.EXE
Please also disable your security applications and try to run the upgrade again.
Kate Li
TechNet Community Support

Installation error EX11

When trying to install InDesign CC on my Windows 7 machine I keep getting the installation error EX11 (Error upon extracting to the temporary folder.) I've already tried two different folders (on my C and my D drive), each with plenty available space.
Any help would be much appreciated!
(I've already tried to ask Adobe support, but it's impossible to get in touch with them. - the links on their website are circular, probably to evade annoying questions from potential clients.)

Please enable the hidden administrator (Enable the (Hidden) Administrator Account on Windows 7, 8, or Vista) & then try to install, or try creating another user profile & install from there.
In case the issue still persists, contact Adobe Support at Adobe: Creative, marketing, and document management solutions
Regards
Rajshree

Installation error code 203 Firefox eBay Companion

I keep getting installation error 203 when I try to install the Mozilla Firefox eBay companion. Does anybody know how to fix this?

Well, you don't say exactly what it is you want to do on eBay nor why you want the Firefox eBay Companion but visiting the Firefox eBay Companion site it notes "firefox companion for ebay is not compatible with firefox 3.0 beta2". You may be running Firefox 3 and if so, try to find a copy of Firefox 2.0 instead.
Let me take a moment here to try and help you out. If you are a seller then you'll want either GarageSale or iSale. I bought both and find GarageSale a far better and easier OS X program to use. And it does an amazing job. It is easy to create a beautiful auction, to publish it directly on eBay and to monitor your auction as it runs. The eBay costs from cost of full listing to shipping, tax, and other options are all there for you.
Now if you are a buyer then you'll want the free GarageBuy. It will do everything you want and need from finding to monitoring, bidding, listing, etc., and both programs are certified eBay clients, work beautifully with you eBay account.
Hope this helps.
Tim...

AnyConnect client 3.1 installation error

Similar Messages

Maybe you are looking for