Anyconnect client installer

Anyone have an issue with the anyconnect client installer that after the install it does make a successful connection but the anyconnect installer window says it failed? Is this a bug?

Well if it works, it must have installed adequately, error messages notwithstanding.
There are a couple of installer bugs documented. I've not run into nay of them personally.
What version and client OS are you installing?

Similar Messages

Anyconnect client under Mac OS X

Hi,
I've got a short trouble running anyconnect client 2.3.254 under Mac OS X 10.5.6.
If I use it to connect an ASA 8.0.4 through a proxy (squid) it doesn't work.
If I use Win XP, with same proxy, it works.
If I don't use any proxy, with my Mac OS X client (on another WAN access) it works too.
So, is anyconnect client supported over proxy server on MAC OS X ???? or did I miss something ?
Thanks for help ;-)
Regards,
Olivier

I think you can connect anyconnet client with MAC OS.
The AnyConnect client image for MAC OSX is a DMG disk image installation package. To install the AnyConnect client on a System Running MAC OSX, follow these steps:
Step 1 Transfer the installation package file to the desktop and double-click the file. A window opens showing an icon representing the installation package file.
Step 2 Double-click the icon to initiate the installation. A dialog window appears asking you to select the device on which to install the client.
Step 3 Select a device and click Next. A dialog to accept the licensing agreement (EULA) appears.
Step 4 Accept the license agreement and click Next.
The installation is complete.

Anyconnect client and clientless connections hang for two users

ASA 5525, v. 9.1(5)19
Anyconnect client 3.1.02026
I have two users who are unable to connect via the AC client or clientless through the web portal. Using the client, it will get stuck in a loop of "checking for updates". On the portal, the connection will proceed to the point of "Cisco Secure Desktop successfully validated... Success.. Reloading..please wait." Then it hangs there.
The issue occurs for the user regardless of which company laptop she logs onto. A help desk tech can use her laptop and successfully connect, but she cannot connect on her own laptop or on another laptop. (Same for the other user.) So the issue doesn't seem to be related to her laptop or the AC installation. (Help desk did reimage her machine early in the troubleshooting process before they realized that the issue seemed to follow the user.)
I've updated the hostscan file - no change in results. Client and clientless connections seem to be working fine for all other users. We're stumped. Suggestions, anyone? thanks!

The LDAP should be server folks -- Active Directory. Chances are whoever manages the ASA's should have access to at least look in Active Directory to look that up. If they don't they need it.
I obviously don't know a lot about what devices you are using, but if you are using ISE, there should be some type of MNT device (Monitoring and Troubleshooting) -- which is collecting the logs and, hopefully, sending them to some type of syslog aggregate collection tool (splunk?).
Otherwise, there should be a device called a CAM (Clean Access Manager) that is collecting logs -- which may also be propagated to a syslog aggregate tool -- although with CAM's, you can pull the reports right out of them in a comma deliminated file (.csv) and go through them that way.
-- The thing that gets me is that it happens to two users no matter what computer they try to connect from, no matter what network they connect from, and other users can authenticate and gain network access on those same devices.
-- That is why it is rather perplexing. Pretty much saying it has to be something with:
- the IP pool they are getting an IP from
- their AD credentials
- their username
- something along those lines, if the information provided was fully accurate.

Oracle 8.1.7 Client Installation Error

Could anyone tell me what's wrong when JREW error occur during Oracle Client Installation? How to overcome this problem?
The details are:
This program has performed an illegal operation and will be shut down.
Jrew caused an invalid page fault in module JAVAI.DLL at 018f:6ee37f8a.
Registers: ......
(OS Win98)
Thanks in advance.

You are aware that the 8.1.7 client is only going to enable you to connect to Oracle systems, right? It's not the Oracle 8.1.7 database.
You should be able to unzip the file and find the Oracle Universal installer which will actually install the 8.1.7 Client for you.

Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !

Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again

Create Client Installer Failing

I have a brand new Mac Mini running Apple Remote Desktop 3.5.1 on Lion 10.7.3 that I am trying to create a custom client installer and right at the end it fails every single time. Saying that "An unexpected error has occured while creating a custom installer. Please try again"
Anyone else getting this issue? at all

Custom Installer Issues with 3.5.2 Client and 3.5.1 Admin
Do you have a computer that is pre ARD client update 3.5.2? if so, you could try making your installer with ARD on that client. And you could report the issue.
And you can always send Feedback about ARD to Apple.
In thread Can't install Apple Remote Desktop 3.5.1 custom installer on Lion 10.7.3, Eric Shaheen suggested looking in //private/tmp/RemoteDesktopClientInstaller/ to see if ARD actually did create the installer; and if so, to copy it to the desktop. in the same thread gavin0001 said he was able to modify the 3.5.2 client update to make a custom installer.
You might also want to check out thread I can't get Custom Installer to create accounts on Lion. I'm using ARD 3.5.1.

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Windows 8.1 Preview not working with AnyConnect Client

I had Windows 8 and was running Cisco AnyConnect client 3.0.10055 perfectly.
I upgraded to the Windows 8.1 preview and it tries to download update and then it fails and disconnects with the following message:
An unknown termination error occurred in the client.
Tried uninstalling and reinstalling the client, no luck.
Any ideas?
Thanks,
Eric

I had the same issue with windows 8.1 x64. I believe there is an issue with the windows 8.1 update process where it fails to update some of the drivers properly. I have noticed this issue with other windows drivers after the update. Follow the steps below and you VPN should work again.
1. Uninstall Cisco Anyconnect client.
2. Go to Device Manager and Disable Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64
3. Go to C:\Windows\System32 and rename vpnva64.sys to vpnva64_Old.sys.
4. Reinstall Cisco Anyconnect client.
5. Go to Device Manager, you see duplicated Cisco AnyConnect VPN Virtual Adapters. Uninstall one of them but do not check the option to remove the driver.
6. Apply the registry fix in this blog: http://www.tomontech.com/2012/03/pro-tip-cisco-anyconnect-vpn-client-and-windows-8-consumer-preview/
7. Try to connect again and your Cisco VPN should work.

Assigning AnyConnect Client Profiles based on the machine?

I have an ASA running 8.2.x code with AnyConnect 2.4.x.I have both Radius and LDAP (AD) AAA available.
If a user connects from a company owned laptop, I want to push down AnyConnect client ProfileA (with scripts to map drives etc...) and network ACL's set A.
If a user connects from any other computer, I want to push down AnyConnect client ProfileB (no scripts etc...) and network ACL's set B.
What I would like to do is CSD to do a machine certificate check (for presence of a cert from my private CA) and to assign a EndPoint Policy attribute (Managed on successful check or Unmanaged on failure). I can then use DAP to tailor the ACL's that get set.
It seems like the only way to handle AnyConnect client profiles is with Group-Policy. Using LDAP I can assign a user to a Group-Policy, but I have no way of determining is they are coming in from a company laptop or not when assigning the Group-Policy. DAP can not assign an AnyConnect client profile.
If at all possible, I do not users to have to pick a conenction profile or use different URL's.
Is there anyway to accomplish this?

Hi
Did you ever resolve this issue? I am trying to assign a specific IP address based on the hostname or machine cert but the certificate matching doesn't seem to look at the machine cert.
Has anyone got any idea how I could do this?
thanks
Steve

Client installation on windows 2008 64-bit

Hi,
Windows2008 64-bit
We are having Oracle9iR2 db on one machine and need to setup client-server connectivity.
For that I have to install Oracle client setup on the machine which is having Windows2008 64-bit Os
so, when trying to install Oracle10g client on Windows2008 64-bit (102010_win64_x64_client) getting the below error :
Abnormal program termination. An internal error has occured.
Please provide the following files to oracle support"
"Unknown"
"Unknown"
"Unknown"
can anybody please tell me the reason and required action to be taken ?
The above error occurs immediately after starting the installation.
which version of oracle client tool can be used to install on windows2008 64-bit machine to connect Oracle9iR2 db ?
Regards

Hi
If you are Windows Server 2008 R2 level than you need to install 10.2.0.5 client
Please see below:
Statement of Direction: Oracle Database 10g Release 2 Client (10.2.0.5) with Microsoft Windows 7 and Windows Server 2008 R2 [ID 1061272.1]
You can also try to use 11g client Please see:
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]
All note avaliable at:
Master Note For Oracle Database Client Installation [ID 1157463.1]
Regard
Helios

Business One Client installation issue

Last Friday we upgraded our SAP Busness One to 8.81 from 8.8 and the update launched for the client installation on XP Pro box, but the installation got interupted and did not complete. I was faced with the problem that I can't uninstall the old client with Add/Remove programs as it has an error that files are missing. the same is if I click on the Setup.exe in the Client shared folder, it wants to uninstall the old version, but bombs as it is missing files.
The question is how do I manually uninstall the old client so I can do a new install of the new version?
As a bandaid, I was able to upgrade another XP Pro box and copy the directory into the probelm one and it lets SAP Business One run. However, I am missing a couple of registry entries.

Same happen to me month back , it was unable to uninstall or remove registry from the system and when we start the new setup it says you already have SAP B1 installed in your system. I check the Program Files folder and there is no SAP folder in it .
Solution but not a professional one...
Just copy the SAP folder from other system which has client installed and working properly and paste it into Program Files .
Now you can run SAP
Regards,
Ghalib

Anyconnect Client profile files deleted after client upgrade

L.S.
I am running anyconnect version 3.1.02040 on a Windows 7 64-bit machine with UAC turned on.
The ASA I am connecting to is a 5510 running ASA OS 8.4.5
The problem I have is the following:
We are using machine certificate authentication combined with RADIUS user authentication.
The machine certificates are stored in the Machine/Personal container in the local machine.
By default, the anyconnect client does not have the rights to access this certificate store when run by the user in non-elevated mode.
We do not want to have the user run the client as administrator (in elevated mode) all the time.
Therefor we have made an Anyconnect Client profile that sets the Certificate Store Override parameter to true and attached it to the group policy.
With this XML in place (in the C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile folder)
the users can connect to the ASA and authenticate using the certificate without the need for elevated rights. This is all working perfectly.
The anyconnect client and XML file are distributed to the clients using a software distribution system (Microsoft SCCM).
The problem happens when I update the Anyconnect package on the ASA. I recently updated the package to release 3.1.03103. This is what happens:
The user can connect using the 3.1.02040 client (certicate authentication works without elevation, since the XML Anyconnect Client Profile is present)
The Anyconnect software updates itself to the new version during the connection, pushed from the ASA.
The VPN is established.
However, the XML file that is associated with the group policy is deleted during the upgrade process and not placed back in the Profile folder on the client after the upgrade.
This means the user cannot connect without using elevated rights the next time he wants to connect.
If he uses elevated rights after the upgrade, the XML is pushed back from the ASA normally, allowing the user to connect without elevation again any subsequent times.
Is there any way to push the XML profile to the client from the ASA after the upgrade of the Anyconnect software?

Hi poiu720408 ,
1. You need to set up a web-url or group-alias under the group policy as web have enable the "tunnel-group-list enable" under the webvpn configuration. So once the user connect to the proper URL/alias the profile will be applied.
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
2. Yes the Anycopnnect store a "Cache " information on the PC , if you want to clan up you have to go to the anyconnect folder on C: on the PC and delete the global_preferences.xml profile.
3. This behavior is totally expected and they should disappear after a some minutes , however if you wan to force this , you can use the command "vpn-sessionsdb logoff webvpn noconfirm"
Please rate helpful post !
Hope this helps
- Randy -

AnyConnect client reconnects after 1 minute

AnyConnect client reconnects after 1 minute; WHY
version 3.1.02026
ASA:asa911-k8.bin
[25-4-2013 8:16:11] Establishing VPN session...
[25-4-2013 8:16:11] Checking for profile updates...
[25-4-2013 8:16:11] Checking for product updates...
[25-4-2013 8:16:11] Checking for customization updates...
[25-4-2013 8:16:11] Performing any required updates...
[25-4-2013 8:16:12] Establishing VPN session...
[25-4-2013 8:16:12] Establishing VPN - Initiating connection...
[25-4-2013 8:16:12] Establishing VPN - Examining system...
[25-4-2013 8:16:12] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:16:15] Establishing VPN - Configuring system...
[25-4-2013 8:16:16] Establishing VPN...
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:17:19] Reconnecting to my.vpn.com...
[25-4-2013 8:17:19] Establishing VPN - Examining system...
[25-4-2013 8:17:24] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:17:25] Reconnecting to my.vpn.com...
[25-4-2013 8:17:25] Establishing VPN - Examining system...
[25-4-2013 8:17:25] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:16:11] Establishing VPN session...
[25-4-2013 8:16:11] Checking for profile updates...
[25-4-2013 8:16:11] Checking for product updates...
[25-4-2013 8:16:11] Checking for customization updates...
[25-4-2013 8:16:11] Performing any required updates...
[25-4-2013 8:16:12] Establishing VPN session...
[25-4-2013 8:16:12] Establishing VPN - Initiating connection...
[25-4-2013 8:16:12] Establishing VPN - Examining system...
[25-4-2013 8:16:12] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:16:15] Establishing VPN - Configuring system...
[25-4-2013 8:16:16] Establishing VPN...
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:17:19] Reconnecting to my.vpn.com...
[25-4-2013 8:17:19] Establishing VPN - Examining system...
[25-4-2013 8:17:24] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:17:25] Reconnecting to my.vpn.com...
[25-4-2013 8:17:25] Establishing VPN - Examining system...
[25-4-2013 8:17:25] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.

Hello Michael,
The problem here is because we cannot succesfully establish a DTLS tunnel. This could happen because:
- DTLS is blocked somewhere in the path
- A non-default DTLS port is being used
If DTLS is blocked in the middle the issue is because as of ASA Release 9.x and AnyConnect Release 3.x, an optimization has been introduced in the form of distinct Maximum Transition Units (MTUs) that are negotiated for TLS/DTLS between the client/ASA. Previously, the client derived a rough estimate MTU which covered both TLS/DTLS and was obviously less than optimal. Now, the ASA computes the encapsulation overhead for both TLS/DTLS and derives the MTU values accordingly.
As long as DTLS is enabled, the client applies the DTLS MTU (in this case 1418) on the VPN adapter (which is enabled before the DTLS tunnel is established and is needed for routes/filters enforcement), to ensure optimum performance. If the DTLS tunnel cannot be established or it is dropped at some point, the client fails over to TLS and adjusts the MTU on the virtual adapter (VA) to the TLS MTU value (this requires a session level reconnect).
In order to eliminate this visible transition of DTLS > TLS, you can configure a separate tunnel group for TLS only access for users that have trouble with the establishment of the DTLS tunnel (such as due to firewall restrictions).
1. The best option is to set the AnyConnect MTU value to be lower than the TLS MTU, which is then negotiated.
group-policy ac_users_group attributes
webvpn
anyconnect mtu 1300
This makes TLS and DTLS MTU values equal. Reconnections are not seen in this case.
2. The second option is to allow fragmentation.
group-policy ac_users_group attributes
webvpn
anyconnect ssl df-bit-ignore enable
With fragmentation, large packets (whose size exceeds the MTU value) can be fragmented and sent through the TLS tunnel.
3. The third option is to set the Maximum Segment Size (MSS) to 1460 as follows:
sysopt conn tcpmss 1460
In this case, the TLS MTU will be 1427 (RC4/SHA1) which is larger than the DTLS MTU 1418 (AES/SHA1/LZS). This should resolve the issue with TCP from the ASA to the AnyConnect client (thanks to MSS), but large UDP traffic from the ASA to the AnyConnect client might suffer from this as it will be dropped by the AnyConnect client due to the lower AnyConnect client MTU 1418. If sysopt conn tcpmss is modified, it might affect other features such as LAN-to-LAN (L2L) IPSec VPN tunnels.
If DTLS is not blocked in the middle another potential cause for the DTLS failure that DTLS is configured on a non-default port after the WebVPN is enabled (for example, when the webvpn enable outside command is entered). This is due to Cisco bug ID CSCuh61321 and has been seen in Release 9.x where the ASA pushes the non-default port to the client, but continues to listen to the default port. Consequently, the DTLS is not built and AnyConnect reconnects.
The workaround for this problem is:
Disable the WebVPN.
Enter the DTLS port.
Enable the WebVPN.
Regards,
-Gustavo Medina

ISE 1.2 Posture Assessment with AnyConnect Client

Hi Experts,
I need clarity for posture assessment with AnyConnect client. I understood that we had traditional NAC agent with ISE 1.1.
Since new Anyconnect version 4 has come which is used for ISE 1.3 posture assessment however I am not sure if I can use Anyconnect 4 with ISE 1.2 ? Can you please put light on this ?
if not , do I need to upgrade to ISE 1.3 ? what is the process to upgrade to ISE 1.3 ?
Thanks in advance

ISE can provision clients with agent and configure agent profiles.You have Client-provisioning policies that enable users to download and install resources on client devices.(Windows and Mac OS X NAC Agents, Cisco NAC Web Agent.

Anyconnect client installer

Similar Messages

Maybe you are looking for