AnyConnect - Client profile

Hi all
I have a very quick question, been trying to find a solution but fail till now. The issue, is there is a default time for AcyConnect client profile to be downloaded/updated when you create a new client profile
Example: if I have already a client profile (XML), then if I create a new Client profile. When the user connects, it should be using the new client profile correct. But this was not the case. The user was using the old client profile. However the new profile was updated on the client side after 8hrs.
Ok as a workaround you could delete the xml file from the client PC, however my question is,is there is an option to enable this to be downloaded after creating the profile. I have checked everywhere with the client profile and was not be able to find any setting. If someone knows could you kindly share this please?
Thanks in advance
Lancellot

Hi Lancellot
as soon as you modify the profile on the ASA (or create a new one), all clients will download this profile as soon as they connect.
Two things to note though:
1. the new profile is only downloaded if the user logs in successfuly. So once the tunnel is established, you should see the new profile in the local profiles directory.
2. Many settings in the profile are applicable *before* the new profile is downloaded, i.e. some are applied only before a connection is initiated (e.g. start before logon), others only during the connection attempt( e.g. automatic certificate selection).
Similarly, if you add new ServerList entries to the profile then they will only be visible in the client GUI after the client downloads the new profile and disconnects.
Does this clarify the behavior you saw?
Herbert

Similar Messages

Assigning AnyConnect Client Profiles based on the machine?

I have an ASA running 8.2.x code with AnyConnect 2.4.x.I have both Radius and LDAP (AD) AAA available.
If a user connects from a company owned laptop, I want to push down AnyConnect client ProfileA (with scripts to map drives etc...) and network ACL's set A.
If a user connects from any other computer, I want to push down AnyConnect client ProfileB (no scripts etc...) and network ACL's set B.
What I would like to do is CSD to do a machine certificate check (for presence of a cert from my private CA) and to assign a EndPoint Policy attribute (Managed on successful check or Unmanaged on failure). I can then use DAP to tailor the ACL's that get set.
It seems like the only way to handle AnyConnect client profiles is with Group-Policy. Using LDAP I can assign a user to a Group-Policy, but I have no way of determining is they are coming in from a company laptop or not when assigning the Group-Policy. DAP can not assign an AnyConnect client profile.
If at all possible, I do not users to have to pick a conenction profile or use different URL's.
Is there anyway to accomplish this?

Hi
Did you ever resolve this issue? I am trying to assign a specific IP address based on the hostname or machine cert but the certificate matching doesn't seem to look at the machine cert.
Has anyone got any idea how I could do this?
thanks
Steve

Anyconnect Client profile files deleted after client upgrade

L.S.
I am running anyconnect version 3.1.02040 on a Windows 7 64-bit machine with UAC turned on.
The ASA I am connecting to is a 5510 running ASA OS 8.4.5
The problem I have is the following:
We are using machine certificate authentication combined with RADIUS user authentication.
The machine certificates are stored in the Machine/Personal container in the local machine.
By default, the anyconnect client does not have the rights to access this certificate store when run by the user in non-elevated mode.
We do not want to have the user run the client as administrator (in elevated mode) all the time.
Therefor we have made an Anyconnect Client profile that sets the Certificate Store Override parameter to true and attached it to the group policy.
With this XML in place (in the C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile folder)
the users can connect to the ASA and authenticate using the certificate without the need for elevated rights. This is all working perfectly.
The anyconnect client and XML file are distributed to the clients using a software distribution system (Microsoft SCCM).
The problem happens when I update the Anyconnect package on the ASA. I recently updated the package to release 3.1.03103. This is what happens:
The user can connect using the 3.1.02040 client (certicate authentication works without elevation, since the XML Anyconnect Client Profile is present)
The Anyconnect software updates itself to the new version during the connection, pushed from the ASA.
The VPN is established.
However, the XML file that is associated with the group policy is deleted during the upgrade process and not placed back in the Profile folder on the client after the upgrade.
This means the user cannot connect without using elevated rights the next time he wants to connect.
If he uses elevated rights after the upgrade, the XML is pushed back from the ASA normally, allowing the user to connect without elevation again any subsequent times.
Is there any way to push the XML profile to the client from the ASA after the upgrade of the Anyconnect software?

Hi poiu720408 ,
1. You need to set up a web-url or group-alias under the group policy as web have enable the "tunnel-group-list enable" under the webvpn configuration. So once the user connect to the proper URL/alias the profile will be applied.
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
2. Yes the Anycopnnect store a "Cache " information on the PC , if you want to clan up you have to go to the anyconnect folder on C: on the PC and delete the global_preferences.xml profile.
3. This behavior is totally expected and they should disappear after a some minutes , however if you wan to force this , you can use the command "vpn-sessionsdb logoff webvpn noconfirm"
Please rate helpful post !
Hope this helps
- Randy -

"Anyconnect client profile" option missing in ASDM

Hello,
I'm in the process of setting up Anyconnect on the ASA, and have successfully updated the licensing, as well as uploaded the anyconnect pkg for web deployment. I enabled anyconnect on the outside interface and can now have the ASA push the client to the machine. Works fine. However, I want to add backup servers that the client will attempt to reach in the event the primary is down. I understand that "client profiles" can be created to customize settings like this. Problem is, when I follow the configuration guide with instructions for making client profiles at this location:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/ac02asaconfig.html#wp1289905
It shows that I should have an option for Anyconnect Client Profile and Anyconnect Client Settings.
I don't have either of those options in ASDM. Here's what mine shows:
I have another "SSL Client profiles" option, but it doesn't seem the same as the options above.
Can someone assist with what I need to do to get the Client Profiles option to be available so I can add backup server information to the client? Thanks!

Thanks for the response Marvin,
It shows the ASA and ASDM versions are 8.2 and 6.2 respectively.
Result of the command: "sh version"
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.2(1)
Result of the command: "sh act | i Ess"
AnyConnect Essentials : Enabled
I don't have the premium license, just the Anyconnect Essentials and Mobile licenses. I would imagine essentials should have the same profile configuration options, though. If it is in fact because I'm running an older version of ASDM, do I need to update both the ASA IOS and ASDM together, or can I just upgrade ASDM on its own? Thanks again.

AnyConnect Client Profile Backup Server Configuration

I'm trying to understand the use of Backup Server option in AnyConnect Client Profile
Configuration > Remote Access VPN > Network (Client) Access > AnyConnect Client Profile > Edit > Backup Server
(Screenshot attached)
My questions:
1. In what all scenarios do we add servers (ASA devices) in this tab
2. If I have same information in two different locations (Site A and Site B) for AnyConnect user, can I add Site A-ASA and Site B-ASA into Backup Server tab as a failover mechanism for end user.
3. Or is it only used to mention ASA devices configured in failover unit
4. In case of failover unit, does it support stateful failover
I could not find answers to above questions from Google search. So, asking here

I think we need to be careful when we talk about failover. The original post was clearly asking about two different scenarios
1) ASAs at two different sites
2) ASAs configured as a High Availability failover pair (Active/Standby).
The profile does work to provide failover in 1) but does not work to provide failover in 2).
I do not know the authoritative answer to the question about IP phones use of the profile. I believe that the answer ought to be that yes the phone would receive the profile after its first connection and would use the backup server identified in the profile is the primary server was not available. That is a basic functionality of the AnyConnect client and if the phone is using the AnyConnect client then it ought to support that failover.
If someone does have an authoritative answer then please speak up. Several of us would like to know the right answer here.
HTH
Rick

AnyConnect Client Profile in ASDM

I am trying to configure a client profile under the AnyConnect Client Profile tab in the ASDM but keep getting an error message stating "Check that you have a proper AnyConnect package installed in the AnyConnect Client Software menu. Also check that your ASDM username have enough privelege."
My user has sufficient privilege but I am not sure which AnyConnect software I should have to enable this. Righ now I have
anyconnect-win-3.0.10055-k9.pkg installed.
This is a lab setup using GNS3.
Any ideas?

Hi Marius,
I would assume you are running ASA 8.0x, right?
Please check this out:
"If you wish to use the ASDM-integrated Profile Editor to configure any of AnyConnect's components, you must use ASDM version 6.4(1) or later."
Security Appliance Software Requirements
So at this point, I would suggest to try to upgrade your ASDM to 6.4 or try with AnyConnect 2.5.
Let me know.
Thanks.
Portu
Please rate any posts you find helpful.

ASDM Anyconnect client profile - unable to edit preferences

Hi,
I have a functioning vpn set up, my problem is that I'm trying to set up anyconnect start before login. I navigate to the anyconnect client profile section in the remote access vpn and create a profile xml file by clicking the add button. I can add a profile but as soon as I save the file I can no longer edit it. The edit button is greyed out and if I double click the file the asdm returns the error: "Input is not a well-formed, schema-compliant XML file."
I'm running the following versions of software:
asdm: 7.1(5)100
anyconnect: 3.1.05152
asa: 8.2(3) <----asa hardware doesn't support running a newer version.
I have not been able to find any info on this particular problem but maybe someone here can help?

Hello Ryan,
Do you run into the same problem if you upload AnyConnect 2.5 and perform the same task?
Also, have you tried this operation from a different machine with and old JAVA version like 1.6?
HTH.

ADSM AnyConnect Client Profile Editor will not close...

When I fire up ADSM and go into the AnyConnect Client Profile Editor It will not let me close the Editor.
If I go it and jsut hit cancel, or OK, or the X, nothing happens. The only way to exit is to Close down Java.
I've run ADSM on a few machines all with the same results.
ADSM Version 6.3(4)
Thanks

I Upgraded to ADSM 7.1(2)
This resolved my issue.

Locking down anyconnect client profile

I was wondering if there is a way to lock down the anyconnect profile on a clients machine. Basically we are using certifcates to authenticate so the client can make a VPN connection. We have enabled the certifcate match function to check for IPSec User Extended Match Key. I can modify the XML on the client PC to bypass the check and authenticate. We would like to keep users from doing that. Is there something I can setup on the ASA versus the client to check the certificate or prevent the XML from being modified?
Thanks in advance.

I went in and modified the xml and removed the following. I was then able to make a connection without checking for the IPSecUser extended key usage. I have 2 certs on my client. One cert has the IPSecUser extended key usage and the other does not.
IPSecUser

AnyConnect Client profile: group-url in server-list with OGS doesn't work propertly

Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 7.0(2)
Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
#show webvpn anyconnect
1.disk0:/anyconnect-win-3.1.00495-k9.pkg 1 dyn-regex=/Windows NT/
   CISCO STC win2k+
   3,1,00495
   Hostscan Version 3.1.00495
Profile in atthach-file. After this profile is uploaded to client Optimal Gateway Selection doesn't work propertly:
When 'vpn1.mydomain.com/mygroup' (it best TTL server) is unreachable, then OGS try to be connected to other servers, but without group-url, for example 'vpn2.mydomain.com' (instead of 'vpn2.mydomain.com/mygroup')

Anton,
It MIGHT be cosmetic:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtz92140
If not please open up a TAC case and provide DART for such a connection.
M.

Associate anyconnect client software with specific profile?

Hi folks,
I want to beta test a new release of the Windows AnyConnect client software with a small number of users. We use the web deployment feature. Is there a way for us to associate a specific version of the client software with a profile? This seems like the easiest way to release the new software to a small group of people.
Thanks
Pat

The only "AutoUpdate" Value in my profile for 3.x is: true
I think if you put the new AC image in flash it's and point to it in the configuration, it's going to update all the clients - not just a specified tunnel or group. I am not 100% on this though.
Is manually installing it in your test environment an option? This is what what we did then exported profile from the firewall and placed it in the directory for the test client.

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

AnyConnect client reconnects after 1 minute

AnyConnect client reconnects after 1 minute; WHY
version 3.1.02026
ASA:asa911-k8.bin
[25-4-2013 8:16:11] Establishing VPN session...
[25-4-2013 8:16:11] Checking for profile updates...
[25-4-2013 8:16:11] Checking for product updates...
[25-4-2013 8:16:11] Checking for customization updates...
[25-4-2013 8:16:11] Performing any required updates...
[25-4-2013 8:16:12] Establishing VPN session...
[25-4-2013 8:16:12] Establishing VPN - Initiating connection...
[25-4-2013 8:16:12] Establishing VPN - Examining system...
[25-4-2013 8:16:12] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:16:15] Establishing VPN - Configuring system...
[25-4-2013 8:16:16] Establishing VPN...
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:17:19] Reconnecting to my.vpn.com...
[25-4-2013 8:17:19] Establishing VPN - Examining system...
[25-4-2013 8:17:24] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:17:25] Reconnecting to my.vpn.com...
[25-4-2013 8:17:25] Establishing VPN - Examining system...
[25-4-2013 8:17:25] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:16:11] Establishing VPN session...
[25-4-2013 8:16:11] Checking for profile updates...
[25-4-2013 8:16:11] Checking for product updates...
[25-4-2013 8:16:11] Checking for customization updates...
[25-4-2013 8:16:11] Performing any required updates...
[25-4-2013 8:16:12] Establishing VPN session...
[25-4-2013 8:16:12] Establishing VPN - Initiating connection...
[25-4-2013 8:16:12] Establishing VPN - Examining system...
[25-4-2013 8:16:12] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:16:15] Establishing VPN - Configuring system...
[25-4-2013 8:16:16] Establishing VPN...
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:17:19] Reconnecting to my.vpn.com...
[25-4-2013 8:17:19] Establishing VPN - Examining system...
[25-4-2013 8:17:24] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:17:25] Reconnecting to my.vpn.com...
[25-4-2013 8:17:25] Establishing VPN - Examining system...
[25-4-2013 8:17:25] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.

Hello Michael,
The problem here is because we cannot succesfully establish a DTLS tunnel. This could happen because:
- DTLS is blocked somewhere in the path
- A non-default DTLS port is being used
If DTLS is blocked in the middle the issue is because as of ASA Release 9.x and AnyConnect Release 3.x, an optimization has been introduced in the form of distinct Maximum Transition Units (MTUs) that are negotiated for TLS/DTLS between the client/ASA. Previously, the client derived a rough estimate MTU which covered both TLS/DTLS and was obviously less than optimal. Now, the ASA computes the encapsulation overhead for both TLS/DTLS and derives the MTU values accordingly.
As long as DTLS is enabled, the client applies the DTLS MTU (in this case 1418) on the VPN adapter (which is enabled before the DTLS tunnel is established and is needed for routes/filters enforcement), to ensure optimum performance. If the DTLS tunnel cannot be established or it is dropped at some point, the client fails over to TLS and adjusts the MTU on the virtual adapter (VA) to the TLS MTU value (this requires a session level reconnect).
In order to eliminate this visible transition of DTLS > TLS, you can configure a separate tunnel group for TLS only access for users that have trouble with the establishment of the DTLS tunnel (such as due to firewall restrictions).
1. The best option is to set the AnyConnect MTU value to be lower than the TLS MTU, which is then negotiated.
group-policy ac_users_group attributes
webvpn
anyconnect mtu 1300
This makes TLS and DTLS MTU values equal. Reconnections are not seen in this case.
2. The second option is to allow fragmentation.
group-policy ac_users_group attributes
webvpn
anyconnect ssl df-bit-ignore enable
With fragmentation, large packets (whose size exceeds the MTU value) can be fragmented and sent through the TLS tunnel.
3. The third option is to set the Maximum Segment Size (MSS) to 1460 as follows:
sysopt conn tcpmss 1460
In this case, the TLS MTU will be 1427 (RC4/SHA1) which is larger than the DTLS MTU 1418 (AES/SHA1/LZS). This should resolve the issue with TCP from the ASA to the AnyConnect client (thanks to MSS), but large UDP traffic from the ASA to the AnyConnect client might suffer from this as it will be dropped by the AnyConnect client due to the lower AnyConnect client MTU 1418. If sysopt conn tcpmss is modified, it might affect other features such as LAN-to-LAN (L2L) IPSec VPN tunnels.
If DTLS is not blocked in the middle another potential cause for the DTLS failure that DTLS is configured on a non-default port after the WebVPN is enabled (for example, when the webvpn enable outside command is entered). This is due to Cisco bug ID CSCuh61321 and has been seen in Release 9.x where the ASA pushes the non-default port to the client, but continues to listen to the default port. Consequently, the DTLS is not built and AnyConnect reconnects.
The workaround for this problem is:
Disable the WebVPN.
Enter the DTLS port.
Enable the WebVPN.
Regards,
-Gustavo Medina

ISE 1.2 Posture Assessment with AnyConnect Client

Hi Experts,
I need clarity for posture assessment with AnyConnect client. I understood that we had traditional NAC agent with ISE 1.1.
Since new Anyconnect version 4 has come which is used for ISE 1.3 posture assessment however I am not sure if I can use Anyconnect 4 with ISE 1.2 ? Can you please put light on this ?
if not , do I need to upgrade to ISE 1.3 ? what is the process to upgrade to ISE 1.3 ?
Thanks in advance

ISE can provision clients with agent and configure agent profiles.You have Client-provisioning policies that enable users to download and install resources on client devices.(Windows and Mac OS X NAC Agents, Cisco NAC Web Agent.

Anyconnect XML Profile Certificate Matching - Multiple Certs different Issuer

Hi Guys
I am trying to setup an xml profile for cisco anyconnect that will look at multiple certificates that could be issued from 2 different CA's.....
Currently having trouble setting this up and it does not look like it is possible..
Is there a way around this?
Regards
Mohamed

The AnyConnect client supports the following certificate match types. Some or all of these may be used for client certificate matching. Certificate matching are global criteria that can be set in an AnyConnect profile. The criteria are:
â¢Key Usage
â¢Extended Key Usage
â¢Distinguished Name
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect20/administrative/guide/admin7.html#wp1000158

AnyConnect - Client profile

Similar Messages

Maybe you are looking for