Anyconnect client under Mac OS X

Hi,
I've got a short trouble running anyconnect client 2.3.254 under Mac OS X 10.5.6.
If I use it to connect an ASA 8.0.4 through a proxy (squid) it doesn't work.
If I use Win XP, with same proxy, it works.
If I don't use any proxy, with my Mac OS X client (on another WAN access) it works too.
So, is anyconnect client supported over proxy server on MAC OS X ???? or did I miss something ?
Thanks for help ;-)
Regards,
Olivier

I think you can connect anyconnet client with MAC OS.
The AnyConnect client image for MAC OSX is a DMG disk image installation package. To install the AnyConnect client on a System Running MAC OSX, follow these steps:
Step 1 Transfer the installation package file to the desktop and double-click the file. A window opens showing an icon representing the installation package file.
Step 2 Double-click the icon to initiate the installation. A dialog window appears asking you to select the device on which to install the client.
Step 3 Select a device and click Next. A dialog to accept the licensing agreement (EULA) appears.
Step 4 Accept the license agreement and click Next.
The installation is complete.

Similar Messages

  • Using SBO  client under Mac with Parallels Desktop for Mac

    A client uses Mac for one of the users, and ask me if it is posible use SBO 2005 SP01 with Parallels Desktop for Mac. Any experiences?

    Hi Hector,
    You may also want to check out VirtualPC for MAC. There's also a demo you can check out.
    http://www.microsoft.com/mac/products/virtualpc/virtualpc.aspx?pid=virtu
    Heather

  • Unable to use proxy server with MAC OS X Anyconnect client

    Hi All,
    I have a VPN setup thru a Cisco 5520, Windows clients connect just find and the end users configure there browser to use our internal proxy servers.   Users with the MAC OS X Anyconnect client can connect, they configure their Mac to use our proxy server, but the broswers will not work, clients can reach networks and resources behind the VPN gateway and have access to the Proxy(Tried a telnet to that hostname/port).  Anyone run into this issue before?  I am running ASA 8.3(2), Anyconnect(OS X) 3.1.01065.
    Thank You

    We had the same problem.
    We are behind government firewall so I don't know which Cisco firewall is used but we are using AnyConnect to establish VPN from internet to LAN behind firewall. We have no problems with Windows. With Mac OS X connection through proxy didn't work with Safari and Chrome (both are using system Proxy setting), but it did work with Firefox (which has it's own Proxy).
    Finally we found out that ethernet MTU size was the culprit. When we set it to manual, with size being 1347 (or less), proxy started to work.

  • Error 751011 - Mac OSX anyconnect client

    Hi all,
    I'm running into the following error when I use a Mac OSX anyconnect client when I try to connect.  Our Windows 7 anyconnect clients login just fine.
    3
    Oct 25 2013
    16:19:54
    751011
    Local:x.x.x.x:4500 Remote:y.y.y.y:34573 Username:Unknown Failed user authentication. Error: General Failure
    %ASA-3-751011: Local: localIP:port Remote:remoteIP:port Username:
    username/group Failed user authentication. Error: error
    A failure occured during user authentication within EAP for an IKE        version 2 remote access connection.
    • localIP:port—The local IP address and        port number
    • remoteIP:port—The remote IP address        and port number
    • username/group—The username or group        associated with this connection attempt
    • error—The error string that indicates        the specific error
    Any ideas of what could be causing this?  We are using certifcate and LDAP for AAA.
    Thanks in Advance.
    Bill

    Hi Harry,
    I have resolved the issue.  I didn't realize that I had to have the Mac Anyconnect pkg file copied to the flash of the ASA.  Once I did that the authentication issue went away.
    Bill

  • Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

    I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
    Go to "Regedit" and search for "Deterministic Networks" and delete it.
    HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
    Search with the following keywords in the registry, under "Uninstall" or  "Components" folders and delete any related entries.
    Vpnapi
    Vpngui
    Cisco
    CVPND
    CVPNDRA
    Ipsecdialer
    Source: https://supportforums.cisco.com/message/3728011#3728011
    But I've still got the same problem, and just cant find anything to help !

    Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
    Per Adapter:
    Click the Start button.
    Click on Control Panel.
    Click on View Network Status and Tasks
    Click on Change adapter settings
    Right-click the shared connection and choose Properties
    Click the Sharing tab
    Clear the Allow other network users to connect through this computer's Internet connection checkbox
    Click OK
    System Wide:
    Click the Start button (Windows' orb)
    Type: services.msc and press ENTER
    Double-Click on Internet Connection Sharing (ICS)
    Change Startup Type to Disabled
    Reboot the computer
    You can now try reinstalling the WiscVPN client again

  • AnyConnect VPN on Mac - Can't SSH to Virtualbox Virtual Machines

    Hi,
    I'm running AnyConnect version 3.1.05170 on my Mac.  I'm also doing SW Development on multiple Virtual Machines on my Mac via VirtualBox.  When I connect via VPN, I can no longer SSH to my Virtual Machines.  I'm sure there is a rules setting or something that is killing my "Host Only Network" in VirtualBox so I can no longer access them.  The worst part is that even if I Quit the AnyConnect Client, I still can't SSH to my Virtual Machines, so whatever rule is put in place doesn't go away when I disconnect the tunnel.
    Has anyone witnessed this or have a suggestion on how to go about solving it?
    Thanks,
    - Curt

    Hello,
    I just encountered the same problem. To solve it, I checked the box "Allow Local (LAN) access when using VPN (if configured)" in the preferences of AnyConnect.
    It's working fine for me but I am using Parallels and not VirtualBox.
    Regards
    David

  • Anyconnect Client profile files deleted after client upgrade

    L.S.
    I am running anyconnect version 3.1.02040 on a Windows 7 64-bit machine with UAC turned on.
    The ASA I am connecting to is a 5510 running ASA OS 8.4.5
    The problem I have is the following:
    We are using machine certificate authentication combined with RADIUS user authentication.
    The machine certificates are stored in the Machine/Personal container in the local machine.
    By default, the anyconnect client does not have the rights to access this certificate store when run by the user in non-elevated mode.
    We do not want to have the user run the client as administrator (in elevated mode) all the time.
    Therefor we have made an Anyconnect Client profile that sets the Certificate Store Override parameter to true and attached it to the group policy.
    With this XML in place (in the C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile folder)
    the users can connect to the ASA and authenticate using the certificate without the need for elevated rights. This is all working perfectly.
    The anyconnect client and XML file are distributed to the clients using a software distribution system (Microsoft SCCM).
    The problem happens when I update the Anyconnect package on the ASA. I recently updated the package to release 3.1.03103. This is what happens:
    The user can connect using the 3.1.02040 client (certicate authentication works without elevation, since the XML Anyconnect Client Profile is present)
    The Anyconnect software updates itself to the new version during the connection, pushed from the ASA.
    The VPN is established.
    However, the XML file that is associated with the group policy is deleted during the upgrade process and not placed back in the Profile folder on the client after the upgrade.
    This means the user cannot connect without using elevated rights the next time he wants to connect.
    If he uses elevated rights after the upgrade, the XML is pushed back from the ASA normally, allowing the user to connect without elevation again any subsequent times.
    Is there any way to push the XML profile to the client from the ASA after the upgrade of the Anyconnect software?

    Hi poiu720408 ,
    1.  You need to set up a web-url or group-alias under the group policy as web have enable the "tunnel-group-list enable" under the webvpn configuration.  So once the user connect to the proper URL/alias the profile will be applied. 
    http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
    2. Yes the Anycopnnect store a "Cache " information on the PC , if you want to clan up you have to go to the anyconnect folder on C: on the PC and delete the global_preferences.xml profile.
    3. This behavior is totally expected and they should disappear  after a some minutes , however if you wan to force this , you can use the command "vpn-sessionsdb logoff webvpn noconfirm"
    Please rate helpful post !
    Hope this helps
    - Randy -

  • ISE 1.2 Posture Assessment with AnyConnect Client

    Hi Experts,
    I need clarity for posture assessment with AnyConnect client. I understood that we had traditional NAC agent with ISE 1.1.
    Since new Anyconnect version 4 has come which is used for ISE 1.3 posture assessment however I am not sure if I can use Anyconnect 4 with ISE 1.2 ?  Can you please put light on this ?
    if not , do I need to upgrade to ISE 1.3 ? what is the process to upgrade to ISE 1.3 ?
    Thanks in advance

    ISE can provision clients with agent and configure agent profiles.You have Client-provisioning policies that enable users to download and install resources on client devices.(Windows and Mac OS X NAC Agents, Cisco NAC Web Agent.

  • DAP default policy only for AnyConnect clients

    Hello
    Is it possible to apply DAP DfltAccessPolicy only for AnyConnect clients ?

    Did you ever get an answer to this question?
    It seems you should be able to set up a two different client profiles.  Under Authentication, ssl-client would would specify "Both" and the sslclientless would specify AAA.  You would likely have to duplicate much of the other work but the requirement would be satisfied.

  • AnyConnect Client Profile in ASDM

    I am trying to configure a client profile under the AnyConnect Client Profile tab in the ASDM but keep getting an error message stating "Check that you have a proper AnyConnect package installed in the AnyConnect Client Software menu.  Also check that your ASDM username have enough privelege."
    My user has sufficient privilege but I am not sure which AnyConnect software I should have to enable this.  Righ now I have
    anyconnect-win-3.0.10055-k9.pkg installed.
    This is a lab setup using GNS3.
    Any ideas?

    Hi Marius,
    I would assume you are running ASA 8.0x, right?
    Please check this out:
    "If you wish to use the ASDM-integrated Profile Editor to configure any of AnyConnect's components, you must use ASDM version 6.4(1) or later."
    Security Appliance Software Requirements
    So at this point, I would suggest to try to upgrade your ASDM to 6.4 or try with AnyConnect 2.5.
    Let me know.
    Thanks.
    Portu
    Please rate any posts you find helpful.

  • Oracle 10.2.0.4 Instant Client for Mac OS X (Intel x86) is available

    The 10.2.0.4 Instant Client for Mac OS X (Intel x86) can be downloaded from:
    http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/intel_macsoft.html

    sqlplus gives me a bus error:
    warcholw-osxi:~/oracle/instantclient_10_2 warcholw$ sqlplus
    Bus error
    warcholw-osxi:~/oracle/instantclient_10_2 warcholw$ gdb sqlplus
    GNU gdb 6.1-20040303 (Apple version gdb-437) (Fri Jan 13 18:45:48 GMT 2006)
    Copyright 2004 Free Software Foundation, Inc.
    GDB is free software, covered by the GNU General Public License, and you are
    welcome to change it and/or distribute copies of it under certain conditions.
    Type "show copying" to see the conditions.
    There is absolutely no warranty for GDB. Type "show warranty" for details.
    This GDB was configured as "i386-apple-darwin"...
    warning: Unable to read symbols for "/scratch/plebld/208/sqlplus/lib/libsqlplus.dylib" (file not found).
    warning: Unable to read symbols for "/scratch/plebld/208/rdbms/lib/libclntsh.dylib.10.1" (file not found).
    warning: Unable to read symbols for "/scratch/plebld/208/network/lib/libnnz10.dylib" (file not found).
    Reading symbols for shared libraries ... done
    (gdb) run
    Starting program: /Volumes/UserData/Users/warcholw/oracle/instantclient_10_2/sqlplus
    dyld: Library not loaded: /scratch/plebld/208/sqlplus/lib/libsqlplus.dylib
    Referenced from: /Volumes/UserData/Users/warcholw/oracle/instantclient_10_2/sqlplus
    Reason: image not found
    Program received signal SIGTRAP, Trace/breakpoint trap.
    0x8fe06046 in __dyld__ZN4dyld5_mainEPK11mach_headeriPPKcS5_S5_ ()
    echo $PATH $DYLD_LIBRARY_PATH
    /sw/bin:/sw/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/Volumes/UserData/Users/Shared/opensource/bin:/Users/warcholw/oracle/instantclient_10_2 /Users/warcholw/oracle/instantclient_10_2
    warcholw-osxi:~/oracle/instantclient_10_2 warcholw$ ls
    BASIC_LITE_README genezi libnnz10.dylib libocijdbc10.dylib network
    BASIC_README glogin.sql libocci.dylib.10.1 libocijdbc10.jnilib ojdbc14.jar
    SQLPLUS_README glogin.sql.orig libociei.dylib libsqlplus.dylib sdk
    classes12.jar libclntsh.dylib.10.1 libociicus.dylib libsqlplusic.dylib sqlplus
    warcholw-osxi:~/oracle/instantclient_10_2 warcholw$
    warcholw-osxi:~/oracle/instantclient_10_2 warcholw$ uname -a
    Darwin warcholw-osxi.local 8.11.1 Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386 i386 i386
    warcholw-osxi:~/oracle/instantclient_10_2

  • Reproducible Shockwave player error under Mac OSX 10.6.3

    I develop Shockwave "jigsaw" puzzles with Director.  Sample at kayingleside.com.  My clients are experiencing problems with the most recent Shockwave player under Mac OSX 10.6 Snow Leopard.  Play a jigsaw at the above web site to experience the problem. 
    When you click on a puzzle piece it vanishes.  You can drag the mouse around as you would to move the puzzle piece but it is difficult to position correctly as the piece is invisible.  When you release the mouse button the piece reappears correctly in it's repositioned location. 
    I can reproduce this behavior myself on a Mac 2 x 2.8 GHz Quad-Core Intel Xeon.  2 GB 800 MHz DDR-2 FB-DIMM;  OSX Snow Leopard 10.6.3;   Shockwave  player 11.5.9r620.  The problem does NOT appear when playing the jigsaw puzzle within Director 11 under Snow Leopard nor  when running OSX 10.5.8.
    [email protected]
    kayingleside.com

    Hi
    According to the minimum sytem requirements required for the
    Adobe Photoshop Lightroom 4
    Mac OS
    Multicore Intel processor with 64-bit support
    Mac OS X v10.6.8 or v10.7
    2GB of RAM
    1GB of available hard-disk space
    1024x768 display
    DVD-ROM drive
    Internet connection required for Internet-based services*
    So the Minimum required is MAC 10.6.8 or 10.7
    Hope It Helps
    Thanks

  • Anyconnect clients with intermittant timeout/high MS

    I'm having a problem where some clients are pinging servers on my lan just fine, but every so often it hangs with about 2500-3000ms then continues just fine for another 30-40 pings.  If I connect with another machine running the same version of Anyconnect (the latest version) it pings consistenty.
    Noticing a lot of strange issues with Anyconnect recently - is there any server side logging that can be enabled to gain more insight on what's going on with specific clients?  I had to reboot another ASA earlier today to remedy a problem where some new clients could connect but couldn't ping anything...while others would work like nothing was wrong...connecting/disconnecting like usual.
    Thanks in advance

    Hi,
    I wil be difficult to figure out exactly what is going on without a TAC case but here are a couple of pointers that might help you to see what is going on:
    1.) Filtered buffered logs on the ASA itself.
    To verify if the traffic is dropped on the ASA or not, you can setup buffered logging:
    logging buffer-size
    logging buffered debugging
    logging on
    Then, check the IP address which is assigned to your AnyConnect client which is unable to pass traffic and check the entries related to it in the logs:
    show logging | i
    2.) Check the statistics of the AnyConnect session on the ASA
    This command will show you a couple of counters related to your session and might give you a hint of what is wrong:
    show vpn-sessiondb detail svc filter a-ipaddress
    You can replace a-ipaddress by p-ipaddress or name if you want to filter on public IP of the client or username.
    3.) Logs generated by the AnyConnect client itself
    If you launch the event viewer from a Windows host where AnyConnect is installed ("eventvwr" command), you'll see that there is a new log type named "Cisco AnyConnect VPN Client". The client will write in there all the logs related to your connection.
    If you are using Linux, the logs will either be stored under /var/log/messages or /var/log/syslog.
    For OSX, it would be /var/log/system.log.
    If you still don't see where the issue is after those steps. my advise would be to open a TAC case to have the issue investigated.
    Regards,
    Nicolas

  • Download Anyconnect client inside ASA

    Hi,
    I currently have a Cisco 5520 ASA which is up and running and the users are able to connect to Anyconnect to VPN into the network.
    However, users plugged into the internal network inside the ASA are unable to connect to the vpn address and download the Anyconnect Client. I think this may be to do with reverse NAT missing?
    I would appreciate any help.
    Thanks in advance.
    Nisha

    Hi Lee,
    I enabled the Anyconnect Client on the inside interface but have had no luck.
    The users are trying to browse to a vpn address from which they are prompted to install the Anyconnect software. This comes under Network (Client) Access right?
    Thanks in advance.
    Nisha

  • AnyConnect Client shows 'Connected' even when it is not

    Hello,
    We have one Windows 8 user, with AnyConnect Client version 3.1.05152 (but we've seen this with a previous version).  He generally does not disconnect  his client, so it will time out at some point during the night, according to our logs.    However, several hours later, the client still indicates that it is connected.  Has anyone else seen this, and found a solution for it?
    Thanks
    MJ

    You can return a new Mac within 14 days of purchase.
    Return it and get another one.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273

Maybe you are looking for