AnyConnect Client v3.1 driver error on windows 7

Hello,
I used AnyConnect Client v3.0 on my windows 7 machine and worked well. But after automatic upgrade to v3.1 by the VPN server(ASA) and it does not work any more. It seems that VPN authentication is successful but activation of VPN adapter fails.
I see two error messages below:
The VPN client driver has encountered an error. Please restart your computer or device, then try again.
AnyConnect was not able to establish a connection to the specified secure gateway. Please try connecting again.
Message History:
[30/08/2013 6:03:14 PM] Ready to connect.
[30/08/2013 6:04:20 PM] Contacting vpn.example.com.
[30/08/2013 6:04:25 PM] User credentials entered.
[30/08/2013 6:04:26 PM] Establishing VPN session...
[30/08/2013 6:04:26 PM] Checking for profile updates...
[30/08/2013 6:04:26 PM] Checking for product updates...
[30/08/2013 6:04:26 PM] Checking for customization updates...
[30/08/2013 6:04:26 PM] Performing any required updates...
[30/08/2013 6:04:32 PM] Establishing VPN session...
[30/08/2013 6:04:32 PM] Establishing VPN - Initiating connection...
[30/08/2013 6:04:33 PM] Establishing VPN - Examining system...
[30/08/2013 6:04:33 PM] Establishing VPN - Activating VPN adapter...
[30/08/2013 6:05:13 PM] Establishing VPN - Repairing VPN adapter...
[30/08/2013 6:06:00 PM] Disconnect in progress, please wait...
[30/08/2013 6:11:53 PM] Connection attempt has failed.
[30/08/2013 6:11:54 PM] Ready to connect.
I already did most of suggestions below from google but still the issue has not been resolved.
- Rebooted the laptop
- Confirm ICS disabled
- Remove Anyconnect client from the laptop and reinstall
- http://www.lehigh.edu/~inlts/comp/docs/vpn/cisco-drvr.html
Cheers
Jeong

I am also facing the exact same issue. I even tried with the newer version. But it does not work. During connection, it asks for accepting the banner and the suddenly the cisco adapter driver gets uninstalled from device manager and cisco pops-up the error screen.
" the VPN client driver encountered an error. Please restart your computer or device and try again"
Please help.

Similar Messages

AnyConnect client 3.1 installation error

Some of my VPN users are getting the following error on Windows 7 64 bit computer. I have uploaded the client to a website. The VPN users are supposed to download and install the client from the web-site. Then they enter the URL to connect to our VPN. This worked fine during the test and only some users are having issues. This seems like Windows issue. Any ideas? Did anyone experience this?
Error
“There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personal or package vendor”
Client- anyconnect-win-3.1.02026-web-deploy-k9.exe

I was able to resolve this issue.
This was the error in Windows events-
Event ID: 11722 Product:
Cisco AnyConnect Secure Mobility Client -- Error 1722.
There is a problem with this Windows Installer package.
A program run as part of the setup did not finish as expected.
Contact your support personnel or package vendor.
Action kdf_acsock64_Install, location:
C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\VACon64.exe, command: kdf -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\\" acsock
ISSUE
Virus damaged the Windows Firewall and Firewall service wasn’t running. When AnyConnect tried to register itself with the Firewall, it failed as the Firewall was damaged.
RESOLUTION
We decided to reimage the computer rather than fixing the issue. Reason- the Virus might have caused other damages that we were not able to detect.

How does AnyConnect client calculate its Link Speed? (Windows 7)

I'm curious about how the AnyConnect client determines what its default Link Speed is, upon initialization?
For example, from behind my home firewall, if I have a client that's physically connected to a 1Gbps uplink, when I launch the AnyConnect client, Windows Task Manager shows me a Link Speed of 9 Mbps for my AnyConnect connection.
However, if I also launch an AnyConnect connection from another machine on my home LAN, connected via 300Mbps WiFi, Windows Task Manager will only show me around a 1 Mbps Link Speed.
How does the AnyConnect client calculate its Link Speed upon connection?   Does it take a percentage of the available upstream bandwidth?
My home ISP bandwidth is 50Mbps down/12 Mbps up.   My corporate ISP (where the ASA I'm connecting to resides) it 50Mbps bi-directional.

For PHP, if you want to handle data in UTF8, NLS_LANG must be set to
"<language>_<territory>.UTF8", where <language> and <territory> are your
preference. There is few difference between ODBC and OCI called by PHP
in this case as both need to set NLS_LANG to UTF8. If you are familiar
with OCI and expect better performance, you can do so. But if you want
to make the application be portable in terms of data source, ODBC is an
appropriate choice.
Data source doesn't matter the encoding of client. The character set of
client is determined by how client calls ODBC functions SQLBindParameter
or SQLBindCol. If the client specifies SQL_C_WCHAR, data is exchanged in
UTF-16 independent from NLS_LANG. If it is SQL_C_CHAR, data is in
NLS_LANG encoding. Unicode ODBC client binds data with SQL_C_WCHAR, that
is exactly the case of MS Access 2000. On the other hand, because PHP
binds data with SQL_C_CHAR, NLS_LANG is taken as the encoding for data
manipulations

AnyConnect client no assigned address error

I am trying to set up the AnyConnect client (v2.4.0196) and when it tries to connect it fails with a no assigned address error. I look in the logs of the ASA and see a No IPv6 address available for SVC connection. IPv6 is disabled on the ASA.
Does anyone know how to prevent the AnyConnect client from trying to get an IPv6 address?
Thanks in advance...

Note that 2.4 is still beta, 2.3.2016 is the latest supported release today.
Having said that, I rather suspect an ASA issue than a client issue. Can you confirm whether or not an ipv4 address is assigned?
I.e. is there something in the logs like:
Oct 13 2009 09:05:55: %ASA-6-737026: IPAA: Client assigned 192.168.0.1 from local pool
Oct 13 2009 09:05:55: %ASA-6-737006: IPAA: Local pool request succeeded for tunnel-group 'DefaultWEBVPNGroup'
(note these are level 6 messages)

Http Client hit without fiddler error in WIndows 8 Apps

Hi All
In production of my windows 8.1 App.
Whenever I hit the service it fails and returns me an error.
Whereas if I start the fiddler and exempt all win8 config, then it hit the service.
Is there anything required for win8 apps to be done on a fresh system.
Need Help

Hi Vishy,
Looks like the issue is caused by Internet configuration of the proxy, I would suggest you ask at TechNet forum to see if we have a better configuration solution instead of the coding solution.
https://social.technet.microsoft.com/Forums/en-US/home?forum=w8itpronetworking
Thanks for your understanding.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

Windows 8.1 Preview not working with AnyConnect Client

I had Windows 8 and was running Cisco AnyConnect client 3.0.10055 perfectly.
I upgraded to the Windows 8.1 preview and it tries to download update and then it fails and disconnects with the following message:
An unknown termination error occurred in the client.
Tried uninstalling and reinstalling the client, no luck.
Any ideas?
Thanks,
Eric

I had the same issue with windows 8.1 x64. I believe there is an issue with the windows 8.1 update process where it fails to update some of the drivers properly. I have noticed this issue with other windows drivers after the update. Follow the steps below and you VPN should work again.
1. Uninstall Cisco Anyconnect client.
2. Go to Device Manager and Disable Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64
3. Go to C:\Windows\System32 and rename vpnva64.sys to vpnva64_Old.sys.
4. Reinstall Cisco Anyconnect client.
5. Go to Device Manager, you see duplicated Cisco AnyConnect VPN Virtual Adapters. Uninstall one of them but do not check the option to remove the driver.
6. Apply the registry fix in this blog: http://www.tomontech.com/2012/03/pro-tip-cisco-anyconnect-vpn-client-and-windows-8-consumer-preview/
7. Try to connect again and your Cisco VPN should work.

Random disconnects from Windows 7 Clients - Disk is full error

Recently upgrade my XServe from 10.5.8 -> 10.6.6 -> 10.7.3 Server.
I have 6 Mac clients connecting to different sharepoints on the server with no issues at all after the upgrade.
I have 2 Windows 7 Home clients running QuickBooks attempting to connecting to their Accounting sharepoint on the server. 10.5.8 / 10.6.6 there were no issues with disconnects. After upgrading to 10.7.3 Server and fixing the login issue, the Windows 7 clients can connect to the sharepoint. But once or twice a day they are getting an error of "The disc or drive Z: is full." (I have the sharepoint mapped to drive Z on Windows 7).
The sharepoint is on a RAID and has over 1TB free storage. The local hard drive in each Windows 7 client has 200-300 GB's free each.. so no drives are actually full.
Is anybody else seeing this?
Their connections are wired.. Gig Ethernet. This was not an issue previous to Lion Server. Only started occuring after the "upgrade" this past Saturday.

Most likely your disk is full . If you go to Preferences/Performance you are able to change your active Scratch Disks.

Windows 7 64 bit / Server 2012 R2 GUI - Type 4 Print Driver error "Cannot connect to the Printer" 0x00000002

Hello, We have multiple Server 2003 Print server and are working on testing a Server 2012 print server. We have run into an issue where a PRINTER (type 4, normal) works with our Windows 7 32 bit clients, Windows 8.1 64 bit clients and the
2012 R2 server, but when trying to install to a windows 7 64 bit clients using \\SERVER\PRINTER we are getting the above message. (The printer is not offered currently in the directory).
I have been scouring the Google and Bing and have yet to find a satisfactory description that matches this issue. Nor have I found other information that resolve this issue. Like, blaming this on the spooler or DLL fixes or Reg hacks (applied
on the client side).
Specifically, we have used the native 2012 R2 drivers "Ricoh Class Driver", "HP LaserJet 4240 PCL6 Class Driver" and "Xerox Phaser 6120 Class Driver"
If I use a Type 3 driver from Xerox I am able to print from the Windows 7 64 bit client to the print device, but I was hoping to get all of my clients onto 1 driver. I understand that I might be able to use some sort of WMI filtering in our GPO
deployments for the Windows 7 64 bit clients when we go live but this sort of <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="55af8faf-887d-4ea5-9032-7c14b199df0f" id="db4a1e65-db1b-4c94-bd84-20ffc96288ce">henky</gs>.
Please, provide some knowledge. Either a solution to this issue or acknowledgement that separate driver will be required. Thank You!!!!!

Hi,
Firstly, please run this "Fix It" tool (Full mode) to reset the print splooer and driver:
You experience Print Spooler error messages after installing or upgrading a Third-Party print driver
http://support.microsoft.com/kb/2793718
And then follow this guide:
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2012/A_11509-Windows-2012-server-setup-print-server-for-both-32bit-64bit-OS-clients-how-to.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

AnyConnect Client (3.1.02040) - Windows 8 won't shut down

I've noticed and issue with Windows 8 and AnyConnect Client version 3.1.02040. I've tried various things to try to resolve this issue but have hit a brick wall. Whenever, I run AnyConnect on my Windows 8 PC and then shut it down for the day, the PC won't turn off. I've ensured my AnyConnect client is disconnected and then quit the application and even killed the VPN service.
Has anyone else seen this issue??? Any resolution???

I also have the same problem. There is a few things that I have noticed...
1. If you disable the Network List Service and the Network Location awareness Services and reboot, this problem does not occure. However, when you disable these services, you are no longer able to manager you network connections.
2. There are many errors that appear in the cisco anyconnect secure mobility client event log
System
Provider
[ Name]
acvpnagent
EventID
2
[ Qualifiers]
9216
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-02-28T20:36:21.000000000Z
EventRecordID
942
Channel
Cisco AnyConnect Secure Mobility Client
Computer
PC2578.swgao.int
Security
EventData
Function: CThread::invokeRun File: .\Utility\Thread.cpp Line: 435 Invoked Function: IRunnable::Run Return Code: -32112629 (0xFE16000B) Description: BROWSERPROXY_ERROR_NO_PROXY_FILE
Provider
[ Name]
acvpnagent
EventID
2
[ Qualifiers]
9216
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-02-28T20:36:21.000000000Z
EventRecordID
940
Channel
Cisco AnyConnect Secure Mobility Client
Computer
PC2578.swgao.int
Security
EventData
Function: CVirtualAdapter::IsVAEnabled File: .\WindowsVirtualAdapter.cpp Line: 2685 Invoked Function: CVirtualAdapter::IsVAEnabled Return Code: -33554423 (0xFE000009) Description: GLOBAL_ERROR_UNEXPECTED Unexpected VA status bits, 25174019
System
Provider
[ Name]
acvpnagent
EventID
2
[ Qualifiers]
9216
Level
3
Task
1
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-02-28T20:36:21.000000000Z
EventRecordID
936
Channel
Cisco AnyConnect Secure Mobility Client
Computer
PC2578.swgao.int
Security
EventData
Function: CVAMgr::cleanupAddress File: .\VAMgr.cpp Line: 2449 Invoked Function: CNetshDeleteAddress::Run Return Code: -31064051 (0xFE26000D) Description: NETSHCOMMAND_ERROR_PARSE_FAILED
I'm not sure what anyconnect is doing, but it appear when disconnecting something is prevting it from resetting all of the network settings.

Error 751011 - Mac OSX anyconnect client

Hi all,
I'm running into the following error when I use a Mac OSX anyconnect client when I try to connect. Our Windows 7 anyconnect clients login just fine.
3
Oct 25 2013
16:19:54
751011
Local:x.x.x.x:4500 Remote:y.y.y.y:34573 Username:Unknown Failed user authentication. Error: General Failure
%ASA-3-751011: Local: localIP:port Remote:remoteIP:port Username:
username/group Failed user authentication. Error: error
A failure occured during user authentication within EAP for an IKE        version 2 remote access connection.
• localIP:port—The local IP address and        port number
• remoteIP:port—The remote IP address        and port number
• username/group—The username or group        associated with this connection attempt
• error—The error string that indicates        the specific error
Any ideas of what could be causing this? We are using certifcate and LDAP for AAA.
Thanks in Advance.
Bill

Hi Harry,
I have resolved the issue. I didn't realize that I had to have the Mac Anyconnect pkg file copied to the flash of the ASA. Once I did that the authentication issue went away.
Bill

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

How do I resolve this error in windows server 2012 MANTENIMIENTOTS_1306_Error_Microsoft-Windows-TerminalServices-SessionBroker-Client_Microsoft-Windows-TerminalServices-SessionBroker-Client/Operational_03/03/2014 8:09:18 a. m.

Como solucionar error
MANTENIMIENTOTS
1306
Error
Microsoft-Windows-TerminalServices-SessionBroker-Client
Microsoft-Windows-TerminalServices-SessionBroker-Client/Operational
03/03/2014 8:09:18 a. m.
de windows server 2012

What exactly you are asking? Please use English language so we can start helping you out. I believe this error seems to be related to Terminal Server. You have to ask your question in appropriate forum in that case. All in all you have to clarify your question
or the thread will not moved or answered. :)
Regards.
Mahdi Tehrani Loves Powershell
Please kindly click on Propose As Answer or to mark this post as
and helpfull to other poeple.

RMS installation error: JDBC-thin client oracle/jdbc/driver/T2CConnection.getLibraryVersionNumber()

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

BH-111 with windows 8.1 Driver Error

I have recently purcharsed the BH-111 and an inateck (BTA-CSR4B5) bluetooth dongle and have successfully gotten the headset to play sound, but it won't fully pair and use the microphone or media controls.
When in the device manager it says Driver Error
The dongle supplyer states that the device is bluetooth 4.0, but backwards compatible with 2.1 (which is what this headset has) so there should be no issue with full use of the BH-111 and my laptop.
Please can you advise what I need to do

Hi @HP-User-123 ,
I see that you don't have the options for the paper types to select in the print driver. I would be happy to help you.
Depending on if you installed the printer by plugging in the USB cable and using the Windows preinstalled driver, or used the downloaded HP Color LaserJet Plug and Play Package. I would suggest to uninstall and download and install the Plug and Play Package if you haven't already.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

AnyConnect Client v3.1 driver error on windows 7

Similar Messages

Maybe you are looking for