AnyConnect Installation Page Redirect - Please help

Hi
I use vpn web login and install the AnyConnect Client, after check Active-X, JAVA... then finally the AnyConnect client installed and the "Connection Established". My question is, at the end there is a page notify user "vpn tunnel already Connected", does this page can be automatically redirect to another web site (or web page)? Or does this page can be customized?
Please see attached file
Many thanks

Try this. Open ASDM > Configurations > Remote Access VPN > Portal - Customization.
Select your template, clik edit.
Select portal and then Home Page.
You should be able to redirect here if I'm not mistaken. I hope this works for you.

Similar Messages

I can not longer send email from my .me email. in outlook 2010 on my PC. I can still recieve emails fine. I have not changed my settings at all. I have however tried all the settings i can find on the support pages. PLEASE HELP

I can still receive icloud ( ME email address) emails fine. I have not changed my settings at all. I have however tried all the settings I can find on the support pages. PLEASE HELP. Nothing has changed. This suddenly just started happening around a month ago. To frustrate me apple does not seem to have a support email or any method to contact them with this issue to do with their email product. I have spent ages going through the apple support sites and I keep getting asked for an apple product to mark it against. I have no apple product as I am using a PC but I am accessing and using their email product. Is there even a phone number I can call? Surely there is a support area for their Email server issues. Can anyone help? It is driving me mad and causing me major issues. My outlook is Outlook 2010 on a windows 8 PC. As I have said it worked fine then one day decided to stop sending emails.
Thanks for your help.

Hi - this problem is discussed here:
https://discussions.apple.com/thread/5375046?start=0&tstart=0

SOMETHING GONE AWRY WITH A BUNCH OF GIFS ON MY PAGE. PLEASE HELP ME.

Please, this is a situation which has me nervous. A friend sent me one of those funny GIF things. It is about six different cat faces and the cats move in different ways depending on what kind of music it is.
I tried to get these GIFs onto my iWeb webpages. I had a difficult time, published one cat face and saw it on Safari on my website. It was a cat with a head bouncing to be bop music. Then I tried to upload all the other cat heads. I botched the job because it ended up with about six of them piling up on each other. Anyhow, I had a bunch of these square windows of cat faces with different kinds of earphones and I thought to myself, "Heh, wouldn't it be funny to see what THAT looks like on a webpage," and I hit the publish button.
As i could see the progres bar advancing I got to thinking how this could muck up my website (I am a neophyte), so I hit the Cancel button. After that, I deleted the page upon which all those GIFs of cats faces bobbing up and down had been placed. I thought that that was the end of it.
Then I went to my email to do something else. Suddenly out of the corner of my eye I could see movement and I realized that it was that notification saying that my page had been published. SO apparently I had not cancelled that page after all. I clicked onto the Visit Me Now button and saw up in the Navbar, a page titled BLANK. The page had bobbing cat head GIFs strewn all over it and I panicked. I closed Safari, went to iWeb to see if I could really get rid of those cat GIFs.
The bottomest line is that I had already deleted that page! How would the cats still be dancing on that blank page if I deleted it? I checked all my other pages and they are OK. How on earth could those dancing cat GIFs be bouncing around on my Safari website when they are nowhere to be found on my iWeb pages?
Please, help me figure this out because I am not comfortable knowing that a whole bunch of GIFs are on my Safari website, maybe screwing everything up by whatever GIFs might be able to do if there were enough of them on a page. Sort of like overload, too any appliances plugged into the wall, etc.
I am nervous, and although this could seem funny on the outside, here in my place it is nerve wracking.
— Lorna in Southern California
Thu, Aug 10, 2006 12:52 AM PST

All right. The cat GIFs are gone now from my website. I had earlier hit the Clear cache button, but apparently I had to hit it about 10 more times plus go to sites outside of the website. I left to do something else and now that I checked my website on Safari, that Blank Page is not there and the GIFs are gone.
I'm glad that's over.
— Lorna in Southern California

How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto? I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help! Thanks!

I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!

It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side :

HT201269 hi, my new device was set up in the store that I bought it from. How can I transfer all old text messages over to my new device? I have followed the icloud back up steps on this page. Please help, thank you.

hi, my new device was set up in the store that I bought it from. How can I transfer all old text messages over to my new device? I have followed the icloud back up steps on this page. Please help, thank you.
Its an iPhone 4
Message was edited by: zzziggy85

Here is how
http://support.apple.com/kb/HT2109

I'm installing java 8 but in the middle I skip the installation because it took so long and now I can't even shut down or cancel the installation.. Please help!

I'm installing java 8 in my macbook pro but in the middle I skip the installation because it took so long and now I can't even shut down or cancel the installation.. Please help!

Hello christine valentina,
Thanks for using Apple Support Communities.
If the failed installation of Java is preventing your computer from shutting down normally, then I'd like you to please first try to force quit the unresponsive installer.
OS X: How to quit an unresponsive application using Force Quit - Apple Support
Cheers,
Alex H.

I want to open a .pdf file MY MacPro is trying to open it with Numbers. I want to open with Pages. Please Help!

I would like to open a pdf file. My MacPro ( Yosemite 10.10.2) is trying to open it with Numbers. I would like to open it with Pages. Please help! How do I open this .pdf with Pages? Thanks

Pages will not open a PDF file
It will export a file as PDF
See
Pages: Supported file formats - Apple Support

HT2534 I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

Follow the steps on this page when creating a new account http://support.apple.com/kb/HT2534
e.g. if using a computer's iTunes : https://discussions.apple.com/message/24321860
If you've already created an account and are being prompted to review it when trying to see it then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054

I can't scroll down to read my ebook. I have to change pdf view after pressing pg dn to view the next page. Please help!

I can't scroll down to read my ebook. I have to change pdf view after pressing pg dn to view the next page. Please help!

Sorted out the problem myself - secret is you have to go to Full Screen view to be able to scroll down. Easy as that - but not so apparent if you are new to this.

My macbokp turns on, chimes, then gets stuck on the gray apple page. have tried rebooting from the OS X install disk, no My macbokp turns on, chimes, then gets stuck on the gray apple page. Please help!

Hello.I have a late 2008 model MacBook with snow leopard installed. I'd been having some trouble with it lately, so I went to disk utility and tried to 'repair disk'. It said there was a file system error and it could repair the disk. So I started up from the install disk and tried again...same thing. Now when I try to turn it on and power it up, it turns on, makes the chime sound and then gets stuck on the gray page with the apple. I have tried removing the battery, unplugging/replugging power, and 'safe start up mode'. It still won't go past the gray apple page. Please help!!! I'd greatly appreciate any advice or comments! Thanks so much....
Julie

If you can boot from the install disk reinstall the operating system and see if it works.

Gateway redirect, please help!

Hi
We are integrating a Web Application into portal (v6.0), users access the application through gateway and portal.
We have configured the Rewriter to take care of the URL related variables and functions in JS functions and CSS definitions and we come to a point where the user can launch the first page of the web application which is hosted by Web Logic behind the portal. We define a proxy in obj.conf in portal to proxy the application in WLS.
But we have problems:
When the user clicks a href link to open a new IE Browser window, the URL address in the new window is:
https://gatewayURL/redirect/http://portalURL/webapp/Servlet1
instead of:
https://gatewayURL/http://portalURL/webapp/Servlet1
Looks like the gateway is "redirecting" the request.
The Servlet1 page opens fine, however, from then on, links in this page, such as
Update, opens a new "Page not found" IE browser window with "javascript:void(0)" as URL address, and the current Servlet1 page can no longer be updated with data.
Setting the "Enable Cookie Management" in gateway console doesn't help.
We have different types of approaches to no avail. Please help us! Thanks.
Joe Zhou

/redirect in the rewritten URL implies that the gateway server cannot connect to the server running your webapp, so it will redirect the browser to the target URL rather than give an error.
--Stephen

ACS Certificate installation problem. Please Help !!!

hello,
I have following configuration:
Catalyst 2950G-proximity switches with IOS 12.1(19)EA1c.
Cisco Secure ACS Appliance 3.2.3.11
SunONE Directory Server ldap server version 5.2_Patch_2
I am trying to setup 802.1x authentication for wired and wireless (aironet) clients, with VLAN parameter provided by using group mapping with ldap groups.
I understand that the best for that will be EAP-GTC version of PEAP.
I tried (for a week now!!!) to install the certificate in order to activate PEAP on ACS.
I carefully read and re-read following documents:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/csapp32/user/sau.htm
and this one
http://www.cisco.com/en/US/products/sw/secursw/ps5338/products_configuration_example09186a008020a45c.shtml
I setup three times a CA using "Microsoft Certificate Services" and OpenSSL. I am positive that Ive done it correctly since each time CA certificate installation worked and each time I found the the CA in the "Certificate Trust List"
The procedure to install the certificate:
1. Install the CA certificate on ACS server (through ftp)
2. Create the Certificate Signing Request and paste in Notepad to make the private key file
3. Paste the Certificate Signing Request into the "base64 encoded PKCS#10..."
4. Get the Server Certificate after issuing and put along with private key file on the ftp server.
When trying to install I get that
"Unsupported private key file format."
message.
The private key file IS the Certificate Signing Request past-ed in a file, Isnt it?!?
I have done that many times. I tried many names and extensions for files. I tried to overcome the UNIX and DOS representation for CR and LF in text files.
Each time the same error message.
same problem like in this thread:
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd61919
Everybody, please help, !!!!

The private key file is a separate file that gets generated by ACS when you create your CSR. I am not sure where the default directory is that it gets stored. You should be able to specify a maximum path for the location that the private key file gets created. Then when you go to import the issued certificate to ACS, you will also need to go back and tell ACS where this private key file is so that it be used.
Steve

JDBC causing page fault, please help

Author: union2000
Jul 8, 2001 6:48 PM
Hi can someone please help.
I am building an database application in Sun Java with JDK 1.2.2 (set up on a
partitioned 16GB drive on the 'C:\' drive partition) as a front end to an Oracle 8i
'starter database' successfully set up and used on Windows 98 (set up on the 'E:\'
drive partition). Both partitions are compatible with each other, both using the same
Windows 98 instance. I am attempting to make a connection to the database using
the usual code:
// You need to import the java.sql package to use JDBC
import java.sql.*;
class connectExample
public static void main (String args [])
throws SQLException
// Load the Oracle JDBC driver
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
// Connect to the database
// You can put a database name after the @ sign in the connection URL.
Connection conn =
DriverManager.getConnection ("jdbc:oracle:oci8:@", "scott", "tiger");
// Close the connecion
conn.close();
Now, the connection seems to be made, the windows messages flash up as does
the database icon and the database is initialised and mounted successfully.
However, RIGHT AFTER THAT.... a Windows message tells me there is a page fault
and prompts me to shut down the Java program / VM. I get the following:
JAVA caused an invalid page fault in
module JAVAI.DLL at 017f:6ee37f3a.
Registers:
EAX=00000018 CS=017f EIP=6ee37f3a EFLGS=00010206
EBX=bff96347 SS=0187 ESP=0063ecd4 EBP=00000000
ECX=cc1b41f0 DS=0187 ESI=00000000 FS=3e8f
EDX=83b3600c ES=0187 EDI=00000000 GS=0000
Bytes at CS:EIP:
8b 4f 3c 33 c0 03 cf 2b f7 66 8b 41 14 33 d2 66
Stack dump:
00000000 0063eec0 0063f76c bff96347 00000000 00000000 00000000 00400000
00010000 744b13e8 00020000 6ee381d0 00000000 0063edbc 00000104 0063ed30
(I close Java, and the database remains mounted and open for use)
Does anyone have any idea why this is happening? I would be very grateful for any
help, thanks.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Lance ([email protected]):
You mean I should install JDK 1.3 and Oracle 8.1.6?
I should work.
Thanks for your reply
Lance<HR></BLOCKQUOTE>
null

Installation problem - urgent, PLEASE help!!

I'm trying to install Java3D and somehow it doesn't seem to be working. I'm not sure whether I should be installing the opengl or the
directx version, but I've tried both with no luck. I'm running Windows
M.E.
I downloaded the JSDK beta 1.4 version (I have previously tried also
with the 1.3 version, this didn't work either), and now have the
jdk1.3.1 as a folder on my C drive ( C:\jdk1.3.1) . Then I downloaded
Java3D from the website, onto C, as an executable file. When I clicked
it, it went through the installation process (not giving me any
options for where to install it, i was just clicking on 'next') and
seemed to complete ok, but I'm trying to test it by running the
helloUniverse demo, and the file isn't even there. There's a Java3D
folder which has been created in Windows, but this just contains a
folder called uninstall_info.
On my Java plug-in control Panel, it is currently set to 'use java
plug-in default'. The other options are to use JRE or JDK, in folders
Program Files\JavaSoft or JDK1.3.1 respectively. I don't know which
one I should be choosing! I think I tried it with the JDK option
before and that didn't work either.
If anyone can please help I'd be really grateful, this is getting
quite urgent!

Hi there!
Well, try installing java3d in the same directory as ur java(which is c:\jdk1.3.1 for u).
If i am not mistaken, java3d, by default, installs in c:\jdk1.2.2 directory.
U also have 2 set the path and classpath in the autoexec.bat to addr to \bin and \lib sub-directories resp.

Button click without "refresh" the current page. Please help

Hi everyone:
Here is my code:
Code:
<HTML>
<HEAD>
<TITLE>Parallel Port</TITLE>
</HEAD>
<BODY>
<H1 ALIGN="CENTER">On/Off Bit0 of server's parallel port</H1>
<form name="myform" action="robotcontrol.jsp" method="POST">
<input type="hidden" name="action" value="<%=action%>">
<INPUT TYPE="SUBMIT" VALUE="set/reset">
<jsp:include page="./VideoToApplet/htmlroot/index.html" flush="true" />
</form>
</BODY>
</HTML>
everytime i click the button, it will perform (set/reset) parallel port, and i have include a html page which consist a video streaming applet.Maybe cause of this:
<form name="myform" action="robotcontrol.jsp" method="POST">
So.. please help !! Thanks in advance.
but unfortunately, everytime i click on the button, it will likely refresh the page, and the applet will auto reconnect to camera,(it take time to reconnect)..

Inside the body of JSP/HTML page, at the end of <BODY>, paste this small script.It will refresh your page automatically after 20 seconds, that is nothing but the value assigned to V.You can assign the time interval as you wish.
<SCRIPT language="javascript">
     var ONESEC = 1000 ;                    // One second (in ms)
     var V = 20 * ONESEC ;
     var ONEMIN = 60 * ONESEC ;     // One minute (in ms)
     var INTERVAL = 1 * ONEMIN ;               // How often is page refreshed (in ms)
     window.setTimeout(function(){
                                        window.location.reload() ;
                                        },V) ;
</SCRIPT>

AnyConnect Installation Page Redirect - Please help

Similar Messages

Maybe you are looking for