Anyconnect license for ASA5520

Dear Team,
Below is the configuration of one of our clients and they have requested for 50 Users Anyconnect License with software being installed on client.
ABC # sh ver
Cisco Adaptive Security Appliance Software Version 8.2(2)
Device Manager Version 5.2(3)
Compiled on Mon 11-Jan-10 14:19 by builders
System image file is "disk0:/asa822-k8.bin"
Config file at boot was "startup-config"
PSO-ASA up 110 days 22 hours
failover cluster up 110 days 22 hours
Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                              Boot microcode   : CN1000-MC-BOOT-2.00
                              SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                              IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.04
  0: Ext: GigabitEthernet0/0  : address is 001e.f760.a75c, irq 9
  1: Ext: GigabitEthernet0/1  : address is 001e.f760.a75d, irq 9
  2: Ext: GigabitEthernet0/2  : address is 001e.f760.a75e, irq 9
  3: Ext: GigabitEthernet0/3  : address is 001e.f760.a75f, irq 9
  4: Ext: Management0/0       : address is 001e.f760.a760, irq 11
  5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
  6: Int: Not used            : irq 5
  7: Ext: GigabitEthernet1/0  : address is 001e.f760.b729, irq 255
  8: Ext: GigabitEthernet1/1  : address is 001e.f760.b72a, irq 255
  9: Ext: GigabitEthernet1/2  : address is 001e.f760.b72b, irq 255
10: Ext: GigabitEthernet1/3  : address is 001e.f760.b72c, irq 255
11: Int: Internal-Data1/0    : address is 0000.0003.0002, irq 255
Licensed features for this platform:
Maximum Physical Interfaces    : Unlimited
Maximum VLANs                  : 150
Inside Hosts                   : Unlimited
Failover                       : Active/Active
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
Security Contexts              : 2
GTP/GPRS                       : Disabled
SSL VPN Peers                  : 2
Total VPN Peers                : 750
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled
This platform has an ASA 5520 VPN Plus license.
Serial Number: JMX1210L21K
Running Activation Key: 0x7c1f6a6e 0x44e5b71d 0xa8b04110 0x9e043c5c 0x0d329294
Configuration register is 0x1
Configuration last modified by enable_15 at 10:58:52.275 UTC Wed Dec 18 2013
I have quoted them "L-ASA-SSL-50=" but confused about the ASA Licensing.
Please let me know if this is the right one or I have to quote something else?
Kindly let me know if we need to purchase client software for client based SSL VPN?
Regards,
Farhan.

Syed,
As per the "show version" output:
SSL VPN Peers                  : 2
Total VPN Peers                : 750
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Do you need AnyConnect Essentials or Premium?
Check:
AnyConnect Secure Mobility Client Features, Licenses, and OSs, Release 3.1
Cisco AnyConnect Secure Mobility Client Licensing Options
Table 2 lists licensing options for the Cisco AnyConnect Secure Mobility Client.
Table 2. Cisco AnyConnect Secure Mobility Client Licensing Options
License Requirements (each license below is required)
Description
Cisco ASA Platform License
Cisco AnyConnect Essentials[2] (P/N: (L-ASA-AC-E-55**=) 05, 10, 20, 40, 50,80, 85)
• Highly secure remote-access connectivity
• Single license per ASA device model (not a per user license); enables maximum simultaneous users on platform
• Full-tunneling access to enterprise applications
Cisco AnyConnect Premium[3] (P/N: (L-ASA-SSL-***=) 10, 25, 50, 100, 250, 500, 1000, 2500, 5000, 10,000
• Also provides support for clientless SSL VPN and capabilities available on desktop AnyConnect platforms including Cisco Secure Desktop HostScan and always-on VPN connectivity
• License is based on number of simultaneous users, and is available as a single device or shared license (part number above is for a single device license)
Cisco AnyConnect Mobile License5
P/N: (L-ASA-AC-M-55*=)
05, 10, 20, 40, 50,80, 85
• Enables Mobile OS platform compatibility
• Single license per ASA device model (not a per user license) is required in addition to Essentials or Premium licenses
Cisco AnyConnect Secure Mobility Client Licensing Options
Let me know if you have any further questions.
HTH.

Similar Messages

  • AnyConnect License

    Hi i have 2 cisco ASA 5550 in Active/standby.
    I want to upgrade anyconnect license to 5000 users, Do i need to buy two license one for each ASA, or i can go with only one for the active ASA ????
    thankssss

    Depends on which ASA version you are currently running.
    ASA version 8.2 and older, you would need to have the same license on both Active and Standby ASA, ie: in your case, 2x 5000 Anyconnect user license.
    ASA version 8.3 and later, you can just get the license for the active ASA. here is the doc for your reference:
    http://www.cisco.com/en/US/docs/security/asa/asa84/license/license_management/license.html#wp1487973
    Hope that helps.

  • Anyconnect license issue?

    Hi,
    I’ve a question about the Anyconnect Premium license.
    Yesterday I tested different Anyconnect profiles on an ASA5505 (9.0.1), everything works perfectly.
    On the same ASA I’ve an IKEv2 site-to-site VPN. When I add the DH-group 14 and 19 to the IKEv2 policy and restart the site-to-site tunnel, the tunnel runs perfectly (with DH-group 19). So far so good. I don’t removed DH-group 5 in de IKEv2 policy, just added DH-group 14 and 19.
    After these change, Anyconnect won't connect.  I got these log information when I try to connect with Anyconnect (IKEv2).
    “Make sure that either an Anyconnect Premium license is installed on the ASA or that no NSA Suite B crypto algorithms are configured in the remote access IKEv2 policies or IPsec proposals.”
    When I restore the IKEv2 policy to (only) DH-group 5, the problem is gone and Anyconnect can connect properly.
    I found this information (Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 3.1).
    • NGE requires an AnyConnect premium license for IKEv2 remote access connections using NSA
    Suite B algorithms. Suite B algorithm usage for other connections or purposes (such as PKI) has no
    limitations. License checks are performed for remote access connections. If you receive a message
    that you are attempting to use an NSA Suite B crypto algorithm without an AnyConnect premium
    license, you have the option to either install the premium license or reconfigure the crypto settings
    to an appropriate level.
    What is going on?? As far as I know the ASA5505 have default 2 Premium licenses…
    Here’s the license info.
    Licensed features for this platform:
    Maximum Physical Interfaces       : 8              perpetual
    VLANs                             : 3              DMZ Restricted
    Dual ISPs                         : Disabled       perpetual
    VLAN Trunk Ports                  : 0              perpetual
    Inside Hosts                      : 10             perpetual
    Failover                          : Disabled       perpetual
    Encryption-DES                    : Enabled        perpetual
    Encryption-3DES-AES               : Enabled        perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 10             perpetual
    Total VPN Peers                   : 12             perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    Cluster                           : Disabled       perpetual
    This platform has a Base license.
    The flash permanent activation key is the SAME as the running permanent key.

    Hi,
    After more research I found this document on the Cisco website.
    Q. Is Next-Generation Encryption available on all platforms?
    A. Next-Generation Encryption is fully supported on the following Cisco  Adaptive Security Appliance Series: ASA 5500-X (5515, 5525, 5545, and  5555), ASA 5580, ASA 5585, and ASA-SM. Next-Generation Encryption is  only partially supported on the Cisco ASA 5505, 5510, 5520, 5540, and  5550 Series Adaptive Security Appliances due to hardware limitations.  Cisco AnyConnect Secure Mobility Client 3.1 or later and an AnyConnect™ Premium license are also required to use Next-Generation Encryption for remote access connections.
    I think the problem would be the hardware, ASA5505 is not supporting DH-group 14,19 etc. for Anyconnect 3.x. But, IKEv2 site-to-site seems to support DH-group 14,19 etc.
    Please correct me if I’m wrong.
    Thanks

  • Upgrade SSL License for ASA5540

    Hi,
    I have ASA5540 with 1000 SSL-VPN License, then I would like upgrade from 1000 to 2000. Which part I have to add between
    L-ASA-SSL-1000=
    L-ASA-SSL-1K-2500=
    ASA5500-SSL-1000=
    Thanks,
    Pongsatorn

    SSL-VPN licenses are not additive. So if you want to move up from a 1000 user license, the next tier is 2500 users. The second SKU above is the correct part to order in that case.
    The first SKU is for 1000 users only (base AnyConnect Premium license for 1000 users). The third SKU is another way of packaging the same thing as the first one.

  • Demo license for the any connect mobilee

    Hello Team,
    Actually we want to  do the testing to connect mobile device to our organisation (for jabber) .
    That required any connect license in ASA ,is there any option we can get the Demo license for the any connect Mobile
    Thanks in Advance 

    Cisco does not offer a demo license for AnyConnect for Mobile. The activation key for that license is not time limited and nothing would prevent you from installing it and then using it forever in production.
    That said, it's not very costly to purchase - no more than a couple hundred US$, depending on your ASA model.

  • DPS Enterprise License for Apple's B2B Store

    Hey everyone,
    we developed an app and successfully tested it on our iPads via DPS. We aim to distribute the app via the B2B store from Apple and the tutorial PDF from Adobe tells me that we need an "Enterprise license" for DPS.
    Our company uses Adobe Creative Cloud and I am wondering now whether this already  means that we have an "Enterprise license" for DPS, as well?
    Cheers,
    Alex

    No. It does not.

  • Microsoft Office can't find your license for this application - multiple copies of Office 2013 x32 failing to start, Software Protection Service timing out

    We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues.  We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
    throw the following error:
    'Microsoft Office can't find your license for this application.  Microsoft Office will now exit.'
    We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
    It appears to be an issue with the Software Protection service not starting properly.  In Event Viewer, we see the following:
    'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
    Event 7000'
    This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates.  It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
    different workstations.  Office repairs have also been unsuccessful.  
    Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing?  Maybe an Office update in the last 2-3 months?
    Thanks for any info.

    We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues.  We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
    throw the following error:
    'Microsoft Office can't find your license for this application.  Microsoft Office will now exit.'
    We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
    It appears to be an issue with the Software Protection service not starting properly.  In Event Viewer, we see the following:
    'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
    Event 7000'
    This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates.  It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
    different workstations.  Office repairs have also been unsuccessful.  
    Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing?  Maybe an Office update in the last 2-3 months?
    Thanks for any info.

  • Adobe Photoshop CS4 Extended, owned for ages, licensing for this product has expired? Was using it two months ago.

    Hello,
    I have been trying to get Adobe's help for over a month now. I've been on the phone twice to them, opened up three seperate cases and still arrived at no solution. I was bought Photoshop CS4 Extended awhile ago and use it for my studies (I'm an art student). Two months ago my harddrive on my computer failed and I had to have a new laptop. I went to reinstall Photoshop and "Licensing for this product has expired" comes up. I've uninstalled, inreinstalled many times and used Microsoft Fix It Programme for uninstalling to make sure all the files are gone.
    Surfing the forums I learned that there should be a folder with back up and Adobe PCD but I don't have that folder at all. The serial number I use is my original serial number that I know works and adobe have even said it's a technical error. What do I do? College starts again in two weeks and I don't have the programme I use for it!

    Try the License Repair Tool Adobe - Adobe Licensing Repair Tool
    Other suggestions if this doesn't work: Error "Licensing has stopped working" | Windows
    Also if you must uninstall, use the Adobe CS Cleaner tool, not the Microsoft one. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • I have a license for Adobe Acrobat XI Standard.  How do I download Adobe Acrobat XI Standard?

    Hello.  I have a license for Adobe Acrobat XI Standard.  How do I download Adobe Acrobat XI Standard?  It seems to be gone from the website...

    Access Denied
    You don't have permission to access "http://trials2.adobe.com/AdobeProducts/ACRO/11/win32/AcrobatStd_11_Web_WWMUI.exe" on this server.
    Reference #18.c81c55c.1422713620.1029cb61
    What's wrong here? Anyone?

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • "Licensing For this Product Has Expired" (But I just bought it!)

    I'm having an installation problem, with Adobe CS4 Design Premium for Windows on Vista(64).  For technicality purposes, I believe everything installed fine, but I have not been able to open the programs even once, which apparently means this is an installation issue.
    Here's the situation:
    I had a trial version of Photoshop CS4, it expired, I uninstalled it (or at least went to Control Panel-->Programs And Features--->"Uninstall"), bought Adobe Premier with my student discount, installed it with the new serial number and the 2 CDs without any problems (so I thought), but now every time I try to open any CS4 Program (Photoshop, Dreamweaver, Illustrator, etc.--anything but Acrobat Pro or Bridge CS4) I get a message saying, 'Licensing for this product has expired.'
    I found an equivalent issue with Macs and there appears to be a quick fix:
    "The tech had me remove APPLICATION SUPPORT > ADOBE > ADOBE PCD > cache > cache.db (to trash)"  This apparently solved the problem.
    Does anyone know an equivalent fix for Windows PCs?
    I've have tried downloading the fix from the following website:
    http://www.adobe.com/support/contact/licensing.html
    (Running this multiple times, rebooting, etc.) but I believe the above website is just for problems of "License has stopped working" and not "Licensing for this product has expired"
    I also tried setting my laptop's date/time back to May 31st 2009 following these instructions:
    http://kb2.adobe.com/cps/494/cpsid_49485.html
    but when I do that, I get the original, 'Accept these Terms' page, and as soon as I click "I agree' that page disappears, and nothing else happens. My computer works fine, but the program does not start. Therefore I can't deactivate the program/serial number, reset the correct date, start the program, and enter the proper serial number.
    Any chance someone knows the appropriate Windows File to remove to solve this problem?  Or have any other advice?
    Many thanks in advance,
    Kevin
    PS--I've tried to stay professional about this situation, but it really has me livid.  I'm appalled that something that cost me 300+ dollars (and I am fully aware it costs most honest people significantly more) could have caused me to waste the better part of a day, and get so frustrated, and I am still no closer to a solution.  If it doesn't get resolved soon I am tempted to try returning the software as 'defective' (which for all intents and purposes it is) or never buy an Adobe product again.  My friends have less trouble with the cracks/keygens/etc out there, and they're up $300+ on me.

    UPDATE:
    So, I took John T. Smith's advice (thanks for the phone number--relatively short wait time compared to the other number I had tried), and called Customer Service.  I got the usual run-around, where the first guy wanted me to try all the things I described in the original post. Had me try something else (which involve reinstalling) which didn't work. Finally, the next gal I talked with admitted she didn't know the solution, and the problem would be 'upgraded' to the next higher level of presumably smarter tech people.  I asked the time frame for this, and she said 1-2 days, which I wasn't happy about, and finally spoke with her supervisor.  This person walked me through the uninstallation, and had 'some files' I should delete.  AND FINALLY, I GOT WHAT I WANTED:
    He said if I just removed/deleted the following file:
    C:\Program Files(x86)\Common Files\Adobe\AdobePCD\Cache\Cache.db
    So the order he wanted me to do it was:
    Uninstall CS4 Design Premium (with windows vista Program and Features in the Control Panel, remove the above file, restart my computer, and reinstall the software. The reinstall didn't go smoothly the first time or two (early on, it said Illustrator, Photoshop, etc could not be installed..) so I just closed ALL programs, and tried again) and finally everything works, or seems to!
    From what I read on a Mac forum with the same problem, it seems like I might not have had to uninstall/reinstall the whole suite (which I wish I'd tried, because it would have saved me nearly 2 hours).
    But at any rate, everything seems to be working.  I wrongly assumed the PC version would have had a different culprit file to be removed.  I wish I'd searched my hard drive for the AdobePCD folder earlier.  But...now I am happy.
    Cheers, and I hope this post might be of some help to a poor unfortunate lad with the same problem I had.

  • How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

    How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

    In this forum, we can't help with purchasing issues.
    My suggestion is to call that phone number.

  • License for Oracle Forms 6i and Oracle Reports 6i

    Hai there,
    May I know if I can buy a license for 2 users for the development tools Forms 6i and Reports 6i.
    How do I go ahead and buy the license on line. Where do I contact.
    Please give me the details.
    Thanks in advance.
    Elizabeth

    Please be aware that this version of Forms is desupported in one months time.
    You can download the software from otn but you should contact your Oracle Account Manager about licensing.
    Regards
    Grant Ronald
    Forms Product Management

  • Need help with Photoshop and "Licensing for this product has stopped working" message. Adobe fix isn't working.

    I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
    I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
    I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.

    I am having similar problem.  Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message.  So now I can not run Illustrator, Photoshop, or even Adobe Reader.  These are properly licensed for about a year. I get "License for product has stopped working".  Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days.  Was on phone support hold today for over 3 hours before line went dead with no help.  What is up with adobe support?  Can anyone help?

  • How to obtain the license for the mentioned products.

    Hi All,
    Please help me in below licensing issues.
    1) Our functional team got the below error while accessing "Job Scheduling Workbench".
    Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
    2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
    Error: APP-BOM 20972: You cannot access this form
    Cause: You do not have a license for Oracle Flow Manufacturing.
    Action: Obtain a license for Oracle Flow Manufacturing.
    Please guide me how to obtain the license for the above products.
    Environment: eBS R12.1.3 on Linux 5.8
    Regards,
    Siva

    Thanks for providing the document. I follow the document and get back to you for any issues.
    Regards,
    Siva.

Maybe you are looking for

  • ColorSync issue - any planned patches or updates?

    I just purchased a wide gamut monitor, the Dell U2410 and have stumbled upon the fact that ColorSync in OS X assumes ICC untagged images are in the same color space as the monitor instead of assuming sRGB. Since the colorspace of the monitor is much

  • How big does an image/project need to be in order to project it onto a screen without it becoming blurry?

    I am creating a project that will be projected onto a large screen, and I want to be sure it doesn't come up blurry. What size/settings are best for a project like this?

  • Files disappeared from Organiser window

    I have encountered a strange problem in PE7.  I successfully completed a project but now I return to it find there are no files (video clips, sound clips etc.) when  I look in the "organiser" or "tagging" window.  When I was working on the project th

  • Can I upload photos taken on my 2760?

    I was the only one with a camera (my Nokia 2760) at a recent event that needed a photo taken. I don't rely on my phone for photography but I was pressed into service unprepared. Can anyone tell me how I upload these shots so I can share with the pers

  • No vibration on texts after 4.2

    Anyone else? My phone silent switch is on but my phone doesn't vibrate even though all the settings are set to Vibrate