AnyConnect - loss of network interface error

I am getting the following error when connecting from a single computer.
"The VPN connection was terminated due to the loss of the network interface used
for the VPN connection."
The only reference I can find to this error currently is a person on this forum having the same issue with a VZ Air card (no resolution) and another in a Cisco tech doument that tells me to restart the device but that's it.
I have uninstalled and resinstalled through Add/Remove programs but not much else beyond that. I can see the VPN hitting the firewall but nothing beyond this. It appears as though the service doesn't have proper permissions and/or something is automatically shutting of/disabling the interface.
Thoughts?

Most people that have 4G loose the data network , it seems it is not to stable.

Similar Messages

SQL 2008 R2 error: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

after some year work with SQL server 2005,i decide change to SQL server 2008 R2.
When i completed install SQL 2008 R2,i can't connected to SQL server due to this following error
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
And when i click to technical details,i take some thing like this
===================================
Cannot connect to HUY-PC\SQLEXPRESS.
===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Error Number: -1
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Please!!!Some body help me solve this problem(except format my computer),i really really need your advice.

Hi huydaibang,
The older version SQL Server 2005 could be installed with SQL Server 2008 R2 side-by-side. It could not be the problem.
The reason that we get this error message is the client stack could not receive SSRP response UDP packet from SQL Browser.
Here are the steps:
1) Make sure your server name is correct, e.g., no typo on the name.
2) Make sure your instance name is correct and there is actually such an instance on your target machine.
3) Make sure the server machine is reachable, e.g, DNS can be resolve correctly, you are able to ping the server (not always true).
4) Make sure SQL Browser service is running on the server.
5) If firewall is enabled on the server, you need to put sqlbrowser.exe and/or UDP port 1434 into exception.
For more information, please refer to
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Intermitten error - SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

Problem: I have a 2 WFE & 1 App server in my SharePoint 2013 Enterprise Edition SharePoint farm. My WFE 2 and App servers connect all the time to the SQL Server using a SQL alias. My WFE1 server work 80% of the
time. It is setup exactly like WFE2 except periodically 1 web app/site collection will stop working and throw the following error:
"A network-related or instance-specific error occurred while establishing a
connection to SQL Server. The server was not found or was not accessible. Verify
that the instance name is correct and that SQL Server is configured to allow
remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)"
When I log into WFE1 I can connect to SQL using the alias using a udl file and telnet to verify the SQL alias is connected.
Hypothesis/guess: It appears like WFE1 periodically looses networking but only for 1 specific site collection.
Any ideas are most welcome?

Hi Aries,
I can rule out SQL Server (AOAG) Always-on as the farm doesn't use it.
"max worker threads" is set to 512 with 4CPU's. Rule out.
From the log and looking at the breakdown of the SharePoint request, the request is hitting the WFE2 server which in turn is trying to connect to the content database. The connection string/instance is not available. In summary, I believe the
issue is WFE2 periodically cannot connect to the SQL instance. At the same time WFE1 is working so we know it isn't the SQL server. WFE1 & WFE 2 are on the same VLAN and both appear connected and can see the SQL database using a udl file.
WFE2 has other web applications that are working while the erring web site fails. An IIS reset fixes the issue and restarting the "App pool" for the offending IIS website also fixes the problem. This tells me the issue
is the IIS process. When it tries to connect to SQL /the content database it fails.
I already raised the ticket with MS , the engineer has been looking at it with me, we have tried to identify the issue and also looked at TCP Chimney offload being a possible issue. As my servers is Windows Server 2012, all the servers have the default
"TCP Chimney Offload" setting set to "disabled". WFE1, WFE2, APP1 and SQL have the same setting so this is not the issue. At least this has been ruled out.
http://support.microsoft.com/kb/951037
http://blogs.msdn.com/b/psssql/archive/2008/10/01/windows-scalable-networking-pack-possible-performance-and-concurrency-impacts-to-sql-server-workloads.aspx
I will keep posting about the problem, hopefully MS support can escalate and the root cause can be determined.
"The bottleneck is on the WFE2 server process trying to communicate with SQL. SQL is up and listening. Only 1 of the website/WebApplication on WFE fail for 15-20 minutes while the other websites are fine."

Lync SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

Dear all,
I'm getting an error when I want to publish my Lync Topology. Thanks in advance.
error:
Error: A network-related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL Server is
configured to allow remote connections. (provider: SQL Network Interfaces,
error: 26 - Error Locating Server/Instance Specified)

Hi,
Would you please elaborate your Lync server environment?
Did the FE server and BE server on different subnets? If so, please try to relocate the SQL server in the same subnet as FE server and then check again.
Please also double check if the step of “Prepare first Standard Edition Server” ran succeed, if not please run again.
Here is a blog may help you:
http://terenceluk.blogspot.com/2011/05/publishing-lync-server-2010-standard.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software
or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SQL server -2012 ( Express edition) network interface error: 26

Hi
Could you please help me to resolve the issue the error :26 while establishing connection with SQL server-2012 ( Express edition) in my local machine. I have installed and configure SQL Server -2012 (Express edition). I have thoroughly checked and
configured TCP/IP to make Enable and insert IP address and port No. 1433 and accordingly set-up new roles in Firewall for both TCP/IP, programme option to recognize to access SQL server/programme to Firewall.
I have also configured SQL management studio Security option i.e New Logins> General > Server Roles> User mapping> as attached screen shoot with this mail.
I have also made enable (Yes) on ICPM through Firewall properties as using windows -8(standard version), but still SQL server isn't enable to connect. I hereby enclosed the error screen shoot. I am testing it ACT ( application compatibility toolkit)
prior configuring this server to SharePoint-2013 or 2010 farm server.
You co-operation in this regard be appreciated.
Regard
Azad
Azadur Sarker 6, Seaford street Stoke-on-Trent, ST4 2EU

Rick,
Great to find your response and excellent reference /article (WIKI publishing, your writing). I have followed your options accordingly to Connect or establish connection with SQL server through client machine ( using IP address and network) but failed and
shows the time out error as bellow screen shoot for your assessment.
SQL SERVER MANAGER OPTION:
-SQL server services:- I got five options as find bellow pic. Except SQL server Agent rest of the options are running well.
As I mentioned i am running SQL server-2012 ( Express edition), so i am not sure, is it a mandatory provision to not run, So please feedback in that option.
IP Config: I have tested IP address ( IPv4) and AZAD-PC, 127.0.0.1 those are responding well ( I have't yet set-up IPv6) including Ping testing.
Using SQL Server Management Studio on the computer running SQL Server, connect to the instance of SQL Server. In Object Explorer, expand Management, expand SQL Server Logs, and then double-click the current log.
In the Log Viewer, click the Filter button on the toolbar. In the Message contains text box, type server is listening on, click Apply filter, and then click OK.
I have configured accordingly on Management Studio.
Enable Protocols:
I have done that and also set-up IP address (IPv4) in all of the IP address options and port no 1433
Testing TCP/IP Connectivity:
Yes, it was success through all the option except ( IPv6)
Testing a Local Connection on Client Machine:
Yes, Working fine.
Testing the Connection:
Failed. I have tried to connect to my machine ( Management studio) using the server name:AZAD-PC\SQLEXPRESS:- failed shows the error no.26, But connected using:AZAD-PC
on ( Management Studio).
Please provide your feedback to resolve the issue.
regard
Azad
Azadur Sarker 6, Seaford street Stoke-on-Trent, ST4 2EU

SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

I'm pretty sure this is a common question, but i still cant seem to find a solution even after a couple days of searching google. I checked my connection strings several times. The port number is 1433 and the database name is correct. In fact, I only get
this error when i'm trying to login with a username and password I made in the asp.net configuration (which works locally). I'm getting kinda desparate/ willing to try anything. Any ideas?

Hi,
It seems like this issue was more related to Microsoft Azure SQL Database, I will move this thread to Microsoft
Azure SQL DatabaseForum for a better help.
Thank you for your understanding.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Time capsule error: Time Machine could not be configured. The built-in network interface could not be found.

Trying to install a new time capsule. I get access to the time capsule via Finder and I am able to surf the web. When trying to chose backup disk, it allows me to chose the Time Capsule from the list and type my password. I then get the following error message:Time Machine could not be configured. The built-in network interface could not be found.
What now?

iblastoff wrote:
glad im not the only one with this issue...
i've been able to do one single time machine back up. tried to backup today and i am getting the "time machine could not be configured. the built-in network interface blah blah blah" crap.
Besides this "me, too" complaint with no information, what have you done about it?
Have you tried this: http://support.apple.com/kb/HT3275#5
What is your backup destination?
What sort of Mac do you have (please update your profile)?

JET install: ERROR: Unable to configure network interface Exiting to shell

Using SUNWjet v4.4.4 I'm trying to build a server using update 5 x86 which seems
to work with one notable exception. The JET server and the build server do not
reside on the same subnet. In order to get around not being able use PXE boot
to boot the build server I'm booting from DVD after making the following modifications
to the grub menu entry:
kernel /I86PC.Solaris_10-1/multiboot kernel/unix - install nowin -B
install_config=x.x.x.x:/opt/SUNWjet,
sysid_config=x.x.x.x:/opt/SUNWjet/Clients/testclient,
install_media=x.x.x.x:/export/install/media/s10u5-x86,
install_boot=x.x.x.x:/export/install/media/s10u5-x86/boot
This seems to kick off the installer however it fails to bring up the network interface:
SunOS release
Configuring devices
Solaris Interactive Text ( Console Session )
ERROR: Unable to configure network interface Exiting to shell
# ifconfig bge0 x.x.x.x up netmask 255.255.255.0
# route add default x.x.x.1
# exit
Using RPC
Installation continues without any errors
It seems that I'm forced to bring up the interface manually each time.
This is what the template looks like:
base_config_ClientArch=i86pc
base_config_ClientEther=XX:XX:XX:XX:XX:XX
base_config_ClientOS=s10u5-x86
base_config_client_allocation="grub"
base_config_products="custom eiscd sds"
base_config_sysidcfg_nameservice=NONE
base_config_sysidcfg_network_interface=PRIMARY
base_config_sysidcfg_ip_address=x.x.x.x
base_config_sysidcfg_netmask=255.255.255.0
base_config_sysidcfg_root_password="XXXXXXXXXXXX"
base_config_sysidcfg_system_locale="en_CA.UTF-8"
base_config_sysidcfg_timeserver=
base_config_sysidcfg_timezone="Canada/Eastern"
base_config_sysidcfg_terminal=vt100
base_config_sysidcfg_security_policy=NONE
base_config_sysidcfg_protocol_ipv6=no
base_config_sysidcfg_default_route=x.x.x.1
I've also tried setting the following:
base_config_sysidcfg_network_interface=PRIMARY
vs
base_config_sysidcfg_network_interface=bge0
I don't mind doing this manually but of course I would much rather have it work automatically.

Try giving more network interface settings in the sysidcfg settings:
network_interface=value {primary hostname=host_name
                          default_route=ip_address or NONE
                          ip_address=ip_address
                          netmask=netmask
                          protocol_ipv6=yes_or_no}
See http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh2r?a=view

ASA5510 - Accessing Anyconnect via other local Interface

Hello - I hope someone can help.
I have a scenario where there is an ASA5510 configured as follows:
Interface0 = Outside
Interface1 = LAN
Interface2 = DMZ
Interface3 = unused
Running ASA version 8.2[1]
All network operations are fine, as are the IPSEC tunnels to other branch offices, and the incoming SSL VPN accessed via the IP address assigned to the external adapter.
My problem is that I have a device on the DMZ that needs to access the AnyConnect service hosted on the external adapter so that it can access LAN resources. When I try accessing it, I see the following errors appearing in the debug log:
3
Dec 03 2012
12:10:50
710003
[DMZ client address]
51031
[AnyConnect ExternalAddress]
443
TCP access denied by ACL from [DMZ client address]/51031 to DMZ:[AnyConnect ExternalAddress]/443
If you look closely, it suggests an ACL issue from the DMZ client to the external AnyConnect IP address BUT it suggests the Anyconnect IP address is on the DMZ interface.
Has anyone seen this before?
Thanks in advance for any help.

In this scenario, you will have to enable Anyconnect on the DMZ interface for letting DMZ users to establish an Anyconnect tunnel and allow access of LAN resources since from DMZ or any other LAN interface you cannot directly VPN on External interface.
For reference, check https://supportforums.cisco.com/message/3801168#3801168 as similar discussion has happened in it as well.
Regards,
Anuj

Hamachi Network Interface Adapter Missing

I was running Windows 7 and Hamachi was working perfectly fine. However, since updating to Windows 10, I've been getting a tunnel error, Hamachi reports the error as:
Failed to connect to the network adapterPeer is not accessible via VPN. After looking into the problem, I've noticed that the Hamachi Network Adapter is missing from my device manager and network connections. I've tried using cmd (in administrative mode) to do the commands: hamachi-2.exe --upd-taphamachi-2.exe --add-tap "Hamachi" The first command gives me
07/30 14:09:39.087 [11620] hamachi-2.exe07/30 14:09:39.104 [11620] assert pos != -1 in ..\client2\engine\win32\main.cpp:325 while the second command: 07/30 14:09:48.727 [12256] tap: add_tapdev(Hamachi)07/30 14:09:48:731 [12256] tap: list_netdev_win32() ..07/30 14:09:48:775 [12256] tap: existing tap found, internal name [Hamachi Network Interface] I've reinstalled hamachi multiple times and now I'm at a complete loss at what to do. I would be very much appreciated if anyone can help me solve this problem.

I've had the same problem. I've tried manualy instaling the Virtual network adapter by following the steps here http://help.logmein.com/articles/en_US/Documentation/hamachi-hamachi-troubleshooting-nwadapter/?l=en_US&fs=Search&pn=1That put a hamachi network in my "Network Connections" but its an "Unidentifed Network" and the tunnel still dosesn't work.

How to choose the good Network Interface on a server ?

Hi all,
On server you have generally more than one ip address so ...How to choose the good Network Interface on a server for the NoSQL Node ?
Thank you for all
C.Pruvost.

Hi Charles I only consider storage nodes and their replicated nodes.
Actually I show an error in the logs saying that one of my storage node use a loopback address. On my laptop I have a network interface and a loopback address (disabled)...when starting sn1 I show that the port 5000 is only linked to the ip address 0.0.0.0 so it is not the good ip address..although i use for configuring :
java -jar ..\lib\kvstore-2.0.23.jar makebootconfig -root root1 -port 5000 -admin 5001 -host ipaddress_of_my_laptop -harange 5010,5020
and after
java -jar ..\lib\kvstore-2.0.23.jar start -root root1
If you have a sample tutorial that explains how simulate on the same laptop an Oracle NoSQL architecture running on 3 disctinct servers please give us this information.
Thank you for all.
Christophe.
PS : error message
Failures: Task 1 ERROR at 2013-01-15 07:23:19 UTC: DeploySN sn3(pruv
ost-pc:5200): 1/DeploySN failed.: Register: Cannot mix loopback and non-loopback
addresses in the same store. The store value is not configured to use loopback
addresses but storage node pruvost-pc:5200 is a loopback address. (11.2.2.0.23)
: Register: Cannot mix loopback and non-loopback addresses in the same store. T
he store value is not configured to use loopback addresses but storage node pruv
ost-pc:5200 is a loopback address. (11.2.2.0.23) java.lang.IllegalStateException
: Register: Cannot mix loopback and non-loopback addresses in the same store. T
he store value is not configured to use loopback addresses but storage node pruv
ost-pc:5200 is a loopback address.
at oracle.kv.impl.sna.StorageNodeAgent.register(StorageNodeAgent.java:15
48)
at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
l.java:194)
at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
l.java:188)
at oracle.kv.impl.fault.ProcessFaultHandler.execute(ProcessFaultHandler.
java:90)
at oracle.kv.impl.sna.StorageNodeAgentImpl.register(StorageNodeAgentImpl
.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
Edited by: chpruvos on Jan 14, 2013 11:24 PM
And my ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 172.20.10.2
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . : 172.20.10.1
Ethernet adapter Local Area Connection* 24:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
and
C:\Users\cpruvost>ping pruvost-pc
Pinging PRUVOST-PC.fr.oracle.com [172.20.10.2] with 32 bytes of data:
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Ping statistics for 172.20.10.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Edited by: chpruvos on Jan 14, 2013 11:25 PM

How to add a new network interface adapter?

Hello,
I followed this tutorial (http://www.oracle.com/technology/obe/ovm/ovmel5pvmdb11gr1/ovmel5pvmdb11gr1.htm) to set up a paravirtualized Oracle Enterprise Linux Version 5 VM on Oracle VM Server. It works fine, however I wish to add another network interface adapter (or NIC) to it, however when I try to import into Oracle VM Manager I get the following error:
"OVM-5004 Invalid virtual machine config file. -"
I don't know where the vm config file is so I can't fix that (I did a search for vm.cfg but couldn't find it). I figured since I could access the machine OK I wouldn't worry about importing it into VM Manager, so my question is, is there a way to set up the Network Interface Adapter through the command line on the VM Server (similar to how it was setup)? Or should I try and fix the "invalid virtual machine config file" error so I can import it into VM Manager and then add the extra Network Interface Adapter?
Thanks in advance,
Michael.

user10862036 wrote:
I don't know where the vm config file is so I can't fix that (I did a search for vm.cfg but couldn't find it). The vm.cfg file would be found in /OVS/running_pool/<vm_name>/ -- the default vm.cfg that ships with the template should successfully import into Oracle VM Manager. Once you have the image imported, you can use Oracle VM Manager to add an additional NIC to the VM.

[SOLVED] Network interface name keeps changing

My network interface name keeps changing between wlp2s0 and wlan0. This is a real pain, since I never know what name will be generated at boot. Most of the time it's called wlp2s0, so this is what netctl is set up to handle by itself. At boots were wlan0 is generated I have to connect manually.
I've tried making the name static by adding a rule to the /etc/udev/rules.d/10-network.rules. The rule i added was:
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="48:5d:60:7e:64:e9", NAME="wlp2s0"
Wlp2s0 is generated at boot alright, but I still have to connect manually with this solution. As if the "new" wlp2s0 is not recognized as the old one (same MAC). What gives?
This is on an Asus Eee 1001PXD, with the Qualcomm Atheros AR9285.
Last edited by madr (2013-05-18 20:09:34)

I've now been able to replicate the issue, and run the command:
journalctl -b
I did find the output:
mai 18 02:30:02 <hostname> systemd-udevd[126]: error changing net interface name wlan0 to wlp2s0: Device or resource busy
I haven't been able to process the whole output yet (I'll continue tomorrow if necessary), but I've found some things that I hope will clearify things. I get similar outputs to the following a lot throughout:
mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: carrier lost
mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: waiting for carrier
mai 18 02:30:04 <hostname> systemd[1]: [email protected]: control process exited, code=exited status=1
mai 18 02:30:04 <hostname> systemd[1]: Failed to start Automatic wireless network connection using netctl profiles.
mai 18 02:30:04 <hostname> systemd[1]: Unit [email protected] entered failed state.
mai 18 02:30:04 <hostname> systemd[1]: Starting Network.
mai 18 02:30:04 <hostname> systemd[1]: Reached target Network.
EDIT:
I see now that this is later in time, so that's not so strange after all. I'll look some more.
EDIT2:
The error code that a name change i impossible is the first time the term 'wlan0' occurs in the log. However there's a line much earlier that talks about wlp2s0:
mai 18 02:29:59 <hostname> systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s0.device...
But as I said, if this information doesn't help, I'll have a closer look at the output tomorrow. Getting late here in Norway now.
Last edited by madr (2013-05-18 01:20:50)

[solved] Network manager error

I installed network manager as the wiki says, added myself to the network group and added the policy kit file. When I did this process on my main box, it worked perfectly, but on my laptop running largely the same things (except 32 bit not 64) I'm getting a little authentication box whenever my network interface comes up, asking for root's password. I put it in, and it instantly says it disconnected. If I run nm-applet from a terminal, I get this error after typing in root's password:
Gkr-Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
I'm using xfce if that makes any difference. Anyone got anything I can try?
Oh and the only reason I'm using NM is because I'm sick of wicd deciding HERP DERP IMA DISCONNECT RIGHT NOW and then not connecting again afterwards. Though since NM isn't working I have to use wpa_supplicant and dhcpcd directly myself.
EDIT: Ooops, this is the wrong section Could a mod please move it to Networking?
Last edited by biltong (2011-09-12 12:58:28)

Now I find gnome-keyring is not installed. That should be made a dependancy for network manager. I also (thanks to that thread) double checked I had the file the wiki said I needed to create, and it turns out I made a typo with my extension. It had .plka instead of .pkla XD Mah bad! So now I just need to get wpa_supplicant to connect one more time and I should be good to go

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

AnyConnect - loss of network interface error

Similar Messages

Maybe you are looking for